Preparation and structural characterization of [RuCl2(CO)2{Te(CH2SiMe3)2}2] and [RuCl2(CO){Te(CH2SiMe3)2}3]

The objective of the present work was to synthesize mononuclear ruthenium complex [RuCl₂(CO)₂{Te(CH₂SiMe₃)₂}₂] (1) by the reaction of Te(CH₂SiMe₃)₂ and [RuCl₂(CO)₃]₂. However, the stoichiometric reaction affords a mixture of 1 and [RuCl₂(CO){Te(CH₂SiMe₃)₂}₃] (2). The X-ray structures show the formation of the cis(Cl), cis(C), trans(Te) isomer of 1 and the cis(Cl), mer(Te) isomer of 2. The ¹²⁵Te NMR spectra of the complexes are reported. The complex distribution depends on the initial molar ratio of the reactants. With an excess of [RuCl₂(CO)₃]₂ only 1 is formed. In addition to the stoichiometric reaction, a mixture of 1 and 2 is observed even when using an excess of Te(CH₂SiMe₃)₂. Complex 1 is, however, always the main product. In these cases the ¹²⁵Te NMR spectra of the reaction solution also indicates the presence of unreacted ligand.     

Tetrakis(triphenylphosphine oxide) complexes of the lanthanide nitrates; synthesis, characterisation and crystal structures of [La(Ph3PO)4(NO3)3]·Me2CO and [Lu(Ph3PO)4(NO3)2]NO3

The reaction of Ln(NO₃)₃·6H₂O (Ln=La, Ce, Pr or Nd) with a sixfold excess of Ph₃PO in acetone formed [Ln(Ph₃PO)₄(NO₃)₃]·Me₂CO. The crystal structure of the La complex shows a nine-coordinate metal centre with four phosphine oxides, two bidentate and one monodentate nitrate groups, and PXRD studies show the same structure is present in the other three complexes. In CH₂Cl₂ or Me₂CO solutions, ³¹P NMR studies show that the complexes are essentially completely decomposed into [Ln(Ph₃PO)₃(NO₃)₃] and Ph₃PO. Similar reactions in ethanol gave [Ln(Ph₃PO)₃(NO₃)₃] only. In contrast for Ln=Sm, Eu or Gd, only the [Ln(Ph₃PO)₃(NO₃)₃] are formed from either acetone or ethanol solutions. For the later lanthanides Ln=Tb–Lu, acetone solutions of Ln(NO₃)₃·6H₂O and Ph₃PO gave [Ln(Ph₃PO)₃(NO₃)₃] only, even with a large excess of Ph₃PO, but from cold ethanol [Ln(Ph₃PO)₄(NO₃)₂]NO₃ (Ln=Tb, Ho–Lu) were obtained. The structure of [Lu(Ph₃PO)₄(NO₃)₂]NO₃ shows an eight-coordinate metal centre with four phosphine oxides and two bidentate nitrate groups. In solution in CH₂Cl₂ or Me₂CO the tetrakis-complexes show varying amounts of decomposition into mixtures of [Ln(Ph₃PO)₃(NO₃)₃], [Ln(Ph₃PO)₄(NO₃)₂]NO₃ and Ph₃PO as judged by ³¹P{¹H} NMR spectroscopy. The [Ln(Ph₃PO)₃(NO₃)₃] also partially decompose in solution for Ln=Dy–Lu, forming some tetrakis(phosphine oxide) species.     

Syntheses of rac/meso-{PhP(3-t-Bu-C5H3)2}-Zr{RN(CH2)3NR}, structural analyses of rac-{PhP(3-t-Bu-C5H3)2}Zr{RN(CH2)3NR} (where R is SiMe3 or Ph), and meso to rac isomerization

Syntheses of rac/meso-{PhP(3-t-Bu-C₅H₃)₂}Zr{Me₃SiN(CH₂)₃NSiMe₃} (rac-3/meso-3) and rac/meso-{PhP(3-t-Bu-C₅H₃)₂}Zr{PhN(CH₂)₃NPh} (rac-4/meso-4) were achieved by metallation of K₂[PhP(3-t-Bu-C₅H₃)₂] · 1.3 THF (2) with Zr{RN(CH₂)₃NR}Cl₂(THF)₂ (where R = SiMe₃ or Ph, respectively) using ethereal solvent. These isomeric pairs were characterized by ¹H, ¹³C{¹H}, and ³¹P{¹H} NMR spectroscopy; rac-3 and rac-4 were also examined via single crystal X-ray crystallography. The structures of rac-3 and rac-4 are notable in the tendency of the cyclopentadienyl rings towards η³ coordination. While isolated samples of rac-3/meso-3 and rac-4/meso-4 slowly isomerize in tetrahydrofuran-d₈ to equilibrium ratios, the isomerization rate for 3 is more than 15-fold greater than that for 4. In addition, equilibrium ratios are rapidly reached when isolated samples of rac-3/meso-3 and rac-4/meso-4 are exposed to tetrabutylammonium chloride in tetrahydrofuran-d₈ solvent. We propose that a nucleophile (either chloride or the phosphine interannular linker) brings about dissociation of one cyclopentadienyl ring, thus promoting the rac/meso isomerization mechanism.     

Geometrical isomerization of fac/mer-Mo(CO)3(phosphite)3 and cis/trans-Mo(CO)4(phosphite)2 catalyzed by Me3SiOSO2CF3

Geometrical isomerization of fac-Mo(CO)₃L₃ (L = P(OPh)₃, P(OMe)₃, P(OEt)₃) to the mer form and that of cis-Mo(CO)₄L₂ (L = P(OPh)₃, P(OMe)₃, PPh₂(OMe)) to the trans form were observed in CH₂Cl₂ at room temperature in the presence of a catalytic amount of Me₃SiOSO₂CF₃ (TMSOTf). Crossover experiments suggest that a ligand dissociation is not involved in the isomerization. A catalytic cycle involving an interaction of the silicon atom in Me₃Si⁺ with one oxygen in P(OR)₃ ligands has been proposed. The first isolation and the X-ray structure analysis were attained for mer-Mo(CO)₃{P(OPh)₃}₃ through the TSMOTf-assisted isomerization of fac-Mo(CO)₃{P(OPh)₃}₃.     

Synthesis and structure of the iron-substituted silylacetylene [(η-C5H5)Fe(CO)2SiMe2C]2 and its cobalt hexacarbonyl derivative [(η-C5H5)Fe(CO)2SiMe2C]2 · Co2(CO)6

A transition metal-substituted silylacetylene [(η⁵-C₅H₅)Fe(CO)₂SiMe₂C]₂, [FpMe₂SiC]₂ (I) was synthesized and characterized spectroscopically and structurally. I crystallized in the monoclinic space group P2₁/n, A = 13.011(3) Å B = 12.912(3) Å, C = 13.175(5) Å, β = 94.95(2). The acetylene linkage is reactive toward Co₂(CO)₈ to form I. Co₂(CO)₆ (II) which was also characterized spectroscopically and by single crystal X-ray diffraction. II crystallized in the orthorhombic space group Pbca, A = 17.64(2) Å, B = 14.225(10) Å, C = 24.49(2) Å.     

Synthesis and crystal structure of [Th2(μ-SO4)2(DMSO)12]{[Mo3S7Br5(DMSO)]Br}2·2DMSO·PhCN

Crystallization from a ThBr₄/DMSO/(Et₄N)₂Mo₃S₇Br₆ mixture in benzonitrile gave [Th₂(µ-SO₄)₂×(DMSO)₁₂]{[Mo₃S₇Br₅(DMSO)]Br}₂·2DMSO·PhCN. The complex has an ionic structure. In the [Th₂(µ-SO₄)₂(DMSO)₁₂]⁴⁺ centrosymmetric binuclear cation, the metal atoms are bound by two sulfate bridges and are coordinated by DMSO oxygen atoms, the coordination polyhedron of thorium(IV) being a tricapped trigonal prism (c.n. 9). The [Mo₃S₇Br₅(DMSO)]^–cluster anion and the bromide ion form an ion pair with S_ax...Br^– short contacts, and the DMSO molecule is coordinated to one of the molybdenum atoms via the oxygen atom. The voids of the structure are filled with DMSO and PhCN solvate molecules, the latter being disordered over two positions related by an inversion center.Original Russian Text Copyright © 2004 by M. N. Sokolov, O. A. Gerasko, S. F. Solodovnikov, and V. P. FedinTranslated from Zhurnal Strukturnoi Khimii, Vol. 45, No. 3, pp. 516–521, May–June 2004.     

DFT studies of structural preference of coordinated ethylene in W(CO)3(PX3)2(CH2CH2) (X=H, CH3, F, Cl, Br, and I)

A set of phosphine complexes of the type W(CO)₃(PX₃)₂(CH₂CH₂) (X=H, CH₃, F, Cl, Br, and I) were investigated by density functional theory method (BP86) to examine the effect of the substituent X on the orientation of C-C vector of the ethylene ligand with respect to one of the metal-ligand bonds as well as the donation and the backdonation in the bonding ligands of phosphine and ethylene. When X=CH₃, H, F, and Cl, the ethylene C-C vector prefers to be coplanar with metal-phosphine bonds, while for the ethylene complexes containing PBr₃ and PI₃ ligands, the structural preference is coplanarity of the ethylene and the metal-carbonyl bonds. The molecular orbital calculations and natural bond orbital analysis were used to examine the structural consequences derived from these complexes. It can be concluded that the structural preferences in the complexes have a clear relation to electronic effects of phosphine ligands. Our calculations for halide phosphine complexes, particularly for PBr₃ and PI₃, allow us to conclude that in addition to electronic effects, steric factors can also affect the orientation of the ethylene ligand in complexes.     

Influence of coordination on N-H X hydrogen bonds. Part II. Zn(NH3)2Br2 and Ni(NH3)2X2 (X is Cl and Br)

Microcrystalline samples of Zn(NH₃)₂Br₂ and Ni(NH₃)₂X₂ (X is Cl⁻ and Br⁻) have been investigated from 100 to 293 K using X-ray diffraction and IR spectroscopy measurements (range 400–4000 cm⁻) performed with isotopically dilute (5% deuterated) samples. Values of Δν(ND)/ΔT for all compounds hint at the existence of hydrogen bonds. Zn(NH₃)₂Br₂ shows The dynamics of ammonia molecules even at 100 K, and no indications are apparent that dynamic disorder of ammonia molecules takes place in Ni(NH₃)₂X₂ (X is Cl⁻ and Br⁻). A comparison between octahedrally coordinated ammoniates [Ni(NH₃)₆]Br₂, Ni(NH₃)₂Br₂ and [Zn(NH₃)₆]Br₂ with tetrahedrally coordinated ones [Zn(NH₃)₂Br₂] leads to the conclusion that the lower coordination number increases the strength of the hydrogen bonds. Because this effect is small, it is not possible to separate the influence of the type of coordinating ions for one coordination number from the influence of the coordination number itself.     

Synthesis and molecular structure of [Mg(CH2SiMe3)(μ-OCH2SiMe3)]4

Crystalline [Mg(CH₂SiMe₃)(μ³-OCH₂SiMe₃)]₄ has been identified as the product of oxidation of ClMgCH₂SiMe₃ with traces of O₂. Its formation requires the formation of Mg(CH₂SiMe₃)₂ via the Schlenk equilibrium. The compound is a rare example of a structurally characterized magnesium alkyl alkoxide with Mg₄O₄ cubane structure.     

Hydrothermal Synthesis and Characterization of (H3N(CH2)4NH3)[V6O14]

A new layered vanadium oxide [H₃N(CH₂)₄NH₃](V₆O₁₄) was synthesized hydrothermally under autogenous pressure at 180°C for 48 h from a mixture of H₂N(CH₂)₄NH₂ and V₂O₅ in aqueous solution. Its structure was determined from single-crystal X-ray diffraction at room temperature with final R=0.0774 and R_w=0.0893. It crystallizes in the monoclinic system (space group P2₁/n with a=9.74(2) Å, b=6.776(5) Å, c=12.60(2) Å, β=96.1(1)°, V=827(2) ų and Z=2). This compound contains mixed-valence V⁵⁺/V⁴⁺ vanadium oxide layers built from [V^VO₄] tetrahedra and pairs of edge-sharing [V^IVO₅] square pyramids with protonated organic amines occupying the interlayer space.     

Formation and structural characterization of mercury complexes from Te(R)CH2SiMe3 (R = Ph, CH2SiMe3) and HgCl2

The reaction of HgCl₂ and Te(R)CH₂SiMe₃ [R = CH₂SiMe₃ (1), Ph (2)] in ethanol yielded a mononuclear complex [HgCl₂{Te(R)CH₂SiMe₃}₂] (R = Ph, 3a; R = CH₂SiMe₃, 3b). The recrystallization of 3a or 3b from CH₂Cl₂ produced a dinuclear complex [Hg₂Cl₂(μ-Cl)₂{Te(R)CH₂SiMe₃}₂] (R = Ph, 4a; R = CH₂SiMe₃, 4b). When 3a was dissolved in CH₂Cl₂, the solvent quickly removed, and the solid recrystallized from EtOH, a stable ionic [HgCl{Te(Ph)CH₂SiMe₃}₃]Cl·2EtOH (5a·2EtOH) was obtained. Crystals of [HgCl₂{Te(CH₂SiMe)₂}]·2HgCl₂·CH₂Cl₂ (6b·2HgCl₂·CH₂Cl₂) were obtained from the CH₂Cl₂ solution of 3b upon prolonged standing. The complex formation was monitored by ¹²⁵Te-, and ¹⁹⁹Hg NMR spectroscopy, and the crystal structures of the complexes were determined by single crystal X-ray crystallography.     

Synthesis, structure and hydrogenation catalytic activity of [Ru3(μ3,η-ampy)(μ,η:η-PhC=CHPh)(CO)6(PPh3) (Hampy = 2-amino-6-methylpyridine)

The compound [RU₃(μ₃,η²- -ampy)(μ₃η¹:η²-PhC=CHPh)(CO)₆(PPh₃)₂] (1) (ampy = 2-amino-6-methylpyridinate) has been prepared by reaction of [RU₃(η-H)(μ₃,η²- ampy) (μ,η¹:η²-PhC=CHPh)(CO)₇(PPh₃)] with triphenylphosphine at room temperature. However, the reaction of [RU₃(μ-H)(μ₃, η² -ampy)(CO)₇(PPh₃)₂] with diphenylacetylene requires a higher temperature (110°C) and does not give complex 1 but the phenyl derivative [RU₃(μ₃,η²-ampy)(μ,η ¹:η² -PhC=CHPh)(μ,-PPh₂)(Ph)(CO)₅(PPh₃)] (2). The thermolysis of complex 1 (110°C) also gives complex 2 quantitatively. Both 1 and 2 have been characterized by0 X-ray diffraction methods. Complex 1 is a catalyst precursor for the homogeneous hydrogenation of diphenylacetylene to a mixture of cis- and trans -stilbene under mild conditions (80°C, 1 atm. of H₂), although progressive deactivation of the catalytic species is observed. The dihydride [RU₃(μ-H)₂(μ ₃,η²-ampy)(μ,η¹:η²- PhC=CHPh)(CO)₅(PPh₃)₂] (3), which has been characterized spectroscopically, is an intermediate in the catalytic hydrogenation reaction.     

Photochemical reaction of W(CO)6 with SnCl4 II. Synthesis and X-ray structure of tetrachlorobis(triphenylphosphine oxide)tungsten(IV), [WCl4(OPPh3)2]

The crystal structure of [WCl₄(OPPh₃)₂](1), formed in the photochemical reaction of W(CO)₆ with SnCl₄ in the presence of triphenylphosphine, has been determined by the single-crystal X-ray diffraction method. The compound crystallizes in the monoclinic space C2/c, with A=14.027(3), B=13.163(3), C=19.621(4) Å, β=96.36(3)°, Z=4. The structure solved by heavy-atom methods has been refined to R=0.0466, for 3489 observed reflections.

The [WCl₄(OPPh₃)₂] molecule possesses a crystallographically imposed C₂ axis passing through the tungsten atom. Despite steric demands, a mutually cis arrangement of triphenylphosphine oxide oxygens is found for [WCl₄(OPPh₃)₂], while there is a slight lengthening of the W---Cl bonds trans to the oxygen atoms.     

Diphenylbutadiene-bridged gadolinium complex [GdCl2(THF) 3]2(μ-Ph2C4H4) · 3THF: The synthesis and crystal structure

The diphenylbutadiene-bridged gadolinium complex [GdCl₂(THF)₃]₂(μ-Ph₂C₄H₄) · 3THF (1) has been obtained by the reaction of Gd(III) chloride with diphenylbutadienepotassium. The molecular structure of 1 was determined by X-ray diffraction. The complex 1 has a binuclear structure in which a bridging diphenylbutadiene ligand is η⁴-bonded to the Gd atoms connecting two GdCl₂(THF)₃ units. Both Gd atoms have a distorted octahedral environment. At the Gd atom the two Cl atoms are in trans positions and the four other coordination sites are occupied by the three O atoms of THF molecules and the η⁴-bonded C₄H₄ fragment of a diphenylbutadiene ligand. In the two η⁴-bonded GdC₄H₄ fragments one of the Gd-C η⁴-distances is significantly elongated (2.86(3) and 2.97(3) Å) compared with other three (2.65(3)–2.69(3) and 2.67(3)—2.77(3) Å). The magnetic moment of Gd, equal to 8.1 BM, is typical for Gd³⁺ compounds that is evidence for a formal charge of DPBD ligand of −2 in complex 1. However, the expected distribution of the C-C bond of the diene fragment as long—short—long is not realized.     

The crystallographic and magnetic characteristics of Sr2CrO4 (K2NiF4-type) and Sr10(CrO4)6F2 (apatite-type)

Solid-state reaction between SrCO₃, Cr₂O₃ and SrF₂ has produced the apatite phase Sr₁₀(CrO₄)₆F₂ and Sr₂CrO₄ which adopts the K₂NiF₄-type structure. The reaction outcome was very sensitive to the heating rate with rapid rise times favouring the formation of Sr₂CrO₄, which has been synthesised at ambient pressure for the first time. Powder X-ray diffraction and electron diffraction confirmed that Sr₂CrO₄ adopts a body centred tetragonal cell (space group I4/mmm) with lattice parameters a=3.8357(1) Å and c=12.7169(1) Å, while a combination of neutron and X-ray diffraction verified Sr₁₀(CrO₄)₆F₂ is hexagonal (space group P6₃/m) with lattice parameters a=9.9570(1) Å and c=7.4292(1) Å. X-ray photoelectron spectroscopy and magnetic measurements were used to characterise the oxidation states of chromium contained within these phases.     

Synthesis, vibrational and NMR spectroscopic characterization of [N(CH3)4][IO2F2] and X-ray crystal structure of [N(CH3)4]2[IO2F2][HF2]

The salt, [N(CH₃)₄][IO₂F₂], was prepared from [N(CH₃)₄][IO₃] and 49% aqueous HF, and characterized by Raman, infrared, and ¹⁹F NMR spectroscopy. Crystals of [N(CH₃)₄]₂[IO₂F₂][HF₂] were obtained by reduction of [N(CH₃)₄][cis-IO₂F₄] in the presence of [N(CH₃)₄][F] in CH₃CN solvent and were characterized by Raman spectroscopy and single-crystal X-ray diffraction: C2/m, a = 14.6765(2) Å, b = 8.60490(10) Å, c = 13.9572(2) Å, β = 120.2040(10)°, V = 1523.35(3) Å³, Z = 4 and R = 0.0192 at 210 K. The crystal structure consists of two IO₂⁻F₂ anions that are symmetrically bridged by two H⁻F₂ anions, forming a [F₂O₂I(FHF)₂IO₂F₂]⁴⁻ dimer. The symmetric bridging coordination for the H⁻F₂ anion in this structure represents a new bonding modality for the bifluoride anion.     

Mixed-metal cluster chemistry VI: Phosphine substitution at CpMoIr3(μ-CO)3(CO)8; X-ray crystal structure of CpMoIr3(μ-CO)3(CO)7(PPh3)

Reactions of CpMoIr₃(μ-CO)₃(CO)₈ (1) with stoichiometric amounts of phosphines afford the substitution products CpMoIr₃(μ-CO)₃(CO)_8−x (L)_x (L = PPh₃, x = 1 (2), 2 (3); L = PMe₃, x = 1 (4), 2 (5), 3 (6)) in fair to good yields (23–54%); the yields of both 3 and 6 are increased on reacting 1 with excess phosphine. Products 2–5 are fluxional in solution, with the interconverting isomers resolvable at low temperatures. A structural study of one isomer of 2 reveals that the three edges of an MoIr₂ face of the tetrahedral core are spanned by bridging carbonyls, and that the iridium-bound triphenyiphosphine ligates radially and the molybdenum-bound cyclopentadienyl coordinates axially with respect to this Molr₂ face. Information from this crystal structure, ³¹P NMR data (both solution and solid-state), and results with analogous tungsten—triiridium and tetrairidium clusters have been employed to suggest coordination geometries for the isomeric derivatives.     

Syntheses and properties of cyanamide and cyanoguanidine complexes of platinum(II). X-Ray structure of trans-[Pt(CF3)(NCNEt2)(PPh3)2][BF4]

Complexes trans-[PtX(L)(PPh₃)₂]A [1: X = CF₃; A = BF₄; L = NCNH₂, NCNMe₂, NCNEt₂, or NCNC(NH₂)₂. 2: X = Cl; A = BPh₄; L = NCNMe₂ or NCNEt₂] and cis-[PtCl(L)(PPh₃)₂][BPh₄] [3: L = NCNH₂ or NCNC(NH₂)₂], which appear to be the first cyanamide or cyanoguanidine complexes of platinum to be reported, have been prepared by treatment of trans-[PtBr(CF₃)(PPh₃)₂] (in CH₂Cl₂/acetone and in the presence of Ag[BF₄]) or of cis-[PtCl₂(PPh₃)₂] (in THF and in the presence of Na[BPh₄]), respectively, with the appropriate substrate. In KBr pellets or in solution 1 (L = NCNMe₂ or NCNEt₂) undergoes ready replacement of the organocyanamide (under the trans influence of CF₃) by bromide to regenerate trans-(PtBr(CF₃)(PPh₃)₂]. The X-ray structure of 1 (X = CF₃, A = BF₄, L = NCNEt₂) is also reported, and shows the presence of two apical intramolecular contacts of the metal with two ortho-hydrogen atoms of the phosphines, whereas the amine N atom of the diethylcyanamide is trigonal planar in the linear NCN framework with a delocalized π system.     

Synthesis and structures of silicon-, germanium- and tin-containing tungsten imido alkyl complexes (ArN)2W(CH2EMe3)2 (E = Si, Ge, Sn)

The novel silicon-, germanium- and tin-containing imido alkyl complexes of tungsten of the type (ArN)₂W(CH₂EMe₃)₂ (; E = Si (1), Ge (2), Sn (3)) have been prepared by the reactions of (ArN)₂WCl₂(dme) (dme = 1,2-dimethoxyethane) with heteroelement-containing alkyllithium or Grignard reagents Me₃ECH₂Li (E = Si, Ge), Me₃ECH₂MgCl (E = Ge, Sn). The title compounds were isolated in high yields as crystalline solids and characterized by elemental analysis, IR, ¹H, ¹³C, ²⁹Si and ¹¹⁹Sn NMR spectroscopy and X-ray diffraction studies. The geometry of the W atoms in the compounds can be described as a distorted tetrahedron.     

Synthesis and crystal structures of the chromium(II) and chromium(III) hexafluoroacetylacetonate complexes trans-Cr(hfac)2(thf)2 and Cr(hfac)3

Treatment of a tetrahydrofuran solution of CrCl₂(thf) with Na(hfac), hfac = 1,1,1,5,5,5-hexafluoroacetylacetonate, followed by crystallization from diethyl ether, affords the six-coordinate chromium(II) complex Cr(hfac)₂(thf)₂. The crystal structures of Cr(hfac)₂(thf)₂ and the chromium(III) complex Cr(hfac)₃ have been determined by single-crystal X-ray diffraction. Cr(hfac)₂(thf)₂ adopts a trans octahedral geometry, in which the Cr–O(hfac) and Cr–O(thf) distances are 1.936(3) and 2.019(6) Å, respectively. Cr(hfac)₃ is an octahedral compound with a Cr–O distance of 1.943(5) Å. Structural comparisons with related molecules are given.