Magnetically recoverable copper ferrite catalyzed cascade synthesis of 4-Aryl-1H-1,2,3-triazoles under microwave irradiation

Magnetically active CuFe₂O₄ catalyzed cascade synthesis of 4-Aryl-1H-1,2,3-triazoles under microwave irradiation starting from aromatic aldehydes, sodium azide and nitromethane has been developed and demonstrated here. The catalyst system needed for the purpose was prepared following a procedure by A. Dandiya et al. with a slight modification and was characterized using FT-IR, XRD, SEM-EDX and TEM analysis. The most notable advantage of the developed methodology is the excellent time economy to carry out the transformation. Other features include simple operating procedure, wide substrate coverage and easy recovery of the catalyst. Reusability of the catalyst has been tested and found to be very satisfactory up to sixth cycle without significant loss in efficiency. All the synthesized compounds have been characterized using FTIR, ¹H & ¹³CNMR spectroscopy, HRMS.     

A Cyclodextrin Molecular Reactor for the Regioselective Synthesis of 1,5-disubstituted-1,2,3-triazoles

6^A-Deoxy-6^A-propynamido-β-cyclodextrin reacts with 4-tert-butylphenyl azide in aqueous solution, to form the 5-(aminocarbonyl)-substituted triazole in preference to the 4-(aminocarbonyl)-substituted analogue, in a ratio of 25:1. The cyclodextrin moiety templates the reaction through the formation of a host-guest complex of the dipole with the dipolarophile, controlling the regioselectivity of cycloaddition. In a control reaction under similar conditions, with propiolamide instead of the cyclodextrin derivative, 5- and 4-(aminocarbonyl)-1-(4-tert-butylphenyl)-1,2,3-triazole were formed in a ratio of 1:4. As well as reversing the regioselectivity, the cyclodextrin substituent increases the rate of cycloaddition, by at least two orders of magnitude for the reaction to give the 5-substituted cycloadduct. Even the rate of formation of the 4-substituted cycloadduct is increased by a factor of two. Less marked effects are observed with phenyl azide and 4-tert-butylbenzyl azide as dipoles.     

A versatile new monomer family: functionalized 4-vinyl-1,2,3-triazoles via click chemistry

Using facile, highly modular synthetic approaches, a new monomer family based on a 1,2,3-triazole-4-vinyl building block has been prepared, and various functional derivatives have been obtained. Subsequent homo- and copolymerization of these novel functionalized monomers gives polymeric materials with unique physical properties, combining many attractive features of more traditional monomers, such as styrene, vinylpyridine, and meth/acrylates.     

Metal-free,highly regioselective sulfonylation of NH-1,2,3-triazoles with sodium sulfinates and thiosulfonates

A convenient and metal-free protocol for the highly regioselective sulfonylation of NH-1,2,3-triazoles is described. A range of readily accessible NH-1,2,3-triazoles were sulfonylated with various aryl sulfinates in the presence of molecular iodine. The scope was extended to thiosulfonates as an efficient sulfonylating agent and nitrochromene derived triazoles were also explored for selective N-sulfonylation. A variety of synthetically viable N²-sulfonyl triazoles were obtained in moderate to high yields with excellent regioselectivities via N–S bond construction under mild reaction conditions.     

An efficient protocol for domino one pot synthesis of 1,2,3-triazoles from natural organic acids and phenols

An efficient three-component protocol was developed for the one-pot synthesis of 1,2,3-triazoles from natural product based acids and phenols, using CuSO₄–sodium ascorbate catalyst system. The method is general and showed considerable synthetic advantage giving products in excellent yields with a wide substrate scope.     

Sodium hydride-mediated synthesis of 1,5-diaryl-1,2,3-triazoles from anti-3-aryl-2,3-dibromopropanoic acids and organic azides

A series of 1,5-disubstituted 1,2,3-triazoles are synthesized by a one-pot process from anti-3-aryl-2,3-dibromopropanoic acids and organic azides mediated by sodium hydride in dimethyl sulfoxide.The reaction is mild and simple,does not require a transition-metal catalyst,and gives products in good to excellent yields.     

Chelating dialkoxide titanium complex: a versatile building block for the construction of heterometallic derivatives

The heterometallic complex [TiCp*(O(2)Bz)(2)AlMe(2)] (2) has been synthesised by reaction of [TiCp*(O(2)Bz)(OBzOH)] (1) with AlMe(3) (Cp*=eta(5)-C(5)Me(5); Bz=benzyl). Complex 1 reacts with HOTf to yield the cationic derivative [TiCp*(OBzOH)(2)]OTf (3) (HOTf=HSO(3)CF(3)). Compound 3 reacts with [{M(mu-OH)(cod)}(2)] (M=Rh, Ir; cod=cyclooctadiene) to render the early-late heterometallic complexes [TiCp*(O(2)Bz)(2){M(cod)}(2)]OTf (M=Rh (4); Ir (5)). The molecular structure of complex 4 has been established by single-crystal X-ray diffraction studies.     

Efficient synthesis of allylic azides and one-pot regioselective synthesis of 1,4-disubstituted 1,2,3-triazoles from homoallyl alcohols

This protocol is for an expedient and operationally simple synthesis of allylic azides and one-pot synthesis of 1,4-disubstituted 1,2,3-triazoles from homoallyl alcohols. Synthesis of allylic azides involves the palladium-catalyzed hydroazidation of unactivated olefins with migration of double bond. This hydroazidation can be coupled to Cu(I) promoted 1,3-dipolar cycloaddition to afford the corresponding 1,4-disubstituted 1,2,3-triazoles.     

Acid-mediated synthesis of fully substituted 1,2,3-triazoles: multicomponent coupling reactions,mechanistic study,synthesis of serine hydrolase inhibitor and its derivatives

We describe the full details of multicomponent coupling reactions in acid-mediated synthesis of fully substituted 1,2,3-triazoles syntheses, and their applications to bioactive molecule synthesis. For substitution with wide range of nucleophiles, selection of acids or activating reagents was important, and various types of multicomponent coupling reactions were demonstrated, allowing functionalization with alcohols, amines, thiol, azide, and carbon nucleophiles. Four-component couplings including double triazolations were also tested. The efficiency of this method was demonstrated by the synthesis of serine hydrolase inhibitor and its novel substituted derivatives.     

Regioselective synthesis of 1,5-disubstituted 1,2,3-triazoles by 1,3-dipolar cycloaddition: Role of Er(OTf)3, ionic liquid and water

A simple procedure to obtain 1,5-disubstituted 1,2,3-triazoles, using the Er(OTf)₃/[mpy]OTf/H₂O catalytic system is described. The reaction proceeds through an eliminative azide–olefin cycloaddition (EAOC) offering a highly regioselective approach and good yields (81–94%). The advantages of this method include simple operations of work-up and the ability of the catalytic system to be re-used five times without an evident loss in yield. The role of IL and water were speculated, invoking also a probable ionic self-assembly (ISA) effect.     

Ferrocenylpyrazole—A versatile building block for hydrogen-bonded organometallic supramolecular assemblies

The crystal architectures of 5-ferrocenylpyrazole (1) and its metal complexes were investigated. Compound 1 can form non-solvated and chloroform-solvated crystals. In both cases, 1 forms a zigzag one-dimensional architecture via NH?N hydrogen bonds. The hydrogen bond exhibits a twofold disorder, which was shown to be static by solid-state ¹³C NMR. In the solvated crystal, the chloroform is released at 415 K, associated with melting of the crystal. The reaction of 1 with metal salts provided metal-centered ferrocenyl clusters [Zn(NO₃)₂(1)₄] (4), [Co(NO₃)₂(1)₄] (5), [CoCl₂(1)₄] (6), [Zn(NCS)₂(1)₂] (7), cis-[Pt(NH₃)₂(1)₂](PF₆)₂ (8), and trans-[Pt(NH₃)₂(1)₄](PF₆)₂ (9). In all of these complexes, 1 acts as a monodentate ligand. In 4, 5, and 7, the multinuclear units are joined via hydrogen bonds to form supramolecular chains. Two polymorphs were found for the crystals of 4. Both are composed of the same hydrogen-bonded chains, but their arrangements are different. 5-Ferrocenyl-1-tritylpyrazole (2) and 4-ferrocenyl-1-methylpyrazole (3) were also crystallographically characterized.     

A photolabile linker for the solid-phase synthesis of 4-substituted NH-1,2,3-triazoles

This communication presents the synthesis of a novel photolabile azidolinker based on the o-nitroveratryl group. The application of this linker for the synthesis and photolytic release of NH-1,2,3-triazoles is described.     

1,10-Phenanthroline: A versatile building block for the construction of ligands for various purposes

This review will cover the developments in the chemistry of phenanthroline-based ligands in the last 10–15 years. 1,10-Phenanthroline (phen) is a classic ligand in coordination chemistry, which couples versatility in metal ion binding with peculiar properties of its complexes. For instance, metal complexes with phenanthroline can be featured by an intense luminescence or can interact with DNA in an intercalative fashion inducing, in some cases, DNA cleavage. For this reason a number of phenanthroline-containing ligands has been recently synthesized by inserting phenanthroline within open-chain or macrocyclic backbone, in order to develop new molecular chemosensors for metal cations and anions, ionophores as well as new intercalating agents for polynucleotides. Furthermore, phenanthroline is rigid and its insertion within cyclic or acyclic structures can impart to the resulting ligand a high degree of pre-organization, affording selective complexing agents. This review will discuss on the coordination, luminescence and intercalating and/or DNA cleaving properties as well as on analytical applications of metal complexes with phenanthroline-based ligands. Particular attention will be devoted to macrocyclic receptors or open-chain ligands that, beside the phenanthroline nitrogen atoms, contain other donor atoms able to interact with the metal cations or anions.     

5,5'-Diamino-2,2'-bipyridine: a versatile building block for the synthesis of bipyridine/catechol ligands that form homo- and heteronuclear helicates

Herein we present an improved synthesis of 5,5'-diamino-2,2'-bipyridine (1) starting from the pyrrole-protected aminopyridine 4. By standard reactions 1 can easily be transformed into the imine- or amide-bridged dicatechol-bipyridine ligands L1-H4 and L2-H4. Whereas ligand L1 readily forms homodinuclear helicates [(L1)3Ti2]4-, the attempted formation of mono-, tri-, or even oligonuclear coordination compounds from this ligand did not work. However, the amide-connected ligand L2 affords mononuclear ([(L2-H4)PdCl2], [(L2-H4)3Zn]2+), dinuclear ([(L2)3Ti2]4-), and heterotrinuclear coordination compounds ([(L2)3Ti2Zn]2-).     

Amidetriazole: a versatile building block for construction of oxyanion anion receptors

The design and synthesis of efficient receptors for tetrahedral oxyanions is an emerging field in supramolecular chemistry. Herein, we have developed a urea-like anion-recognizing motif, amidetriazole, which can be easily synthesized and derived and shows good solubility. A series of simple acyclic receptors were designed and synthesized to confirm the potential of amidetriazole for the construction of tetrahedral oxyanion receptors. This molecular platform can be used extensively for the construction of numerous receptor systems appended with functional groups, which opens the way to many applications in the field of supramolecular chemistry.     

Isocorannulenofuran: a versatile building block for the synthesis of large buckybowls

Isocorannulenofuran, synthesized in two steps from accessible bromocorannulene, gives Diels-Alder adducts with benzynes which can be deoxygenated to produce large polycyclic aromatic hydrocarbons (PAHs) combining the bowl-shaped corannulene subunit with planar fragments. [reaction: see text]     

Synthesis of a versatile pentacyclic building block for organic electronics

A new pentacyclic building block, benzodibenzofuranquinone (BDBFQ), is synthesized in a single step from the inexpensive and readily available feedstocks chloranil and 3‐bromophenol. This versatile repeat unit is incorporated into a series of conjugated materials as either the redox active quinone form or as an electron‐rich dialkylated benzodibenzofuran (BDBF) unit. To illustrate the performance that can be obtained from these systems, optical and electrochemical properties were studied via UV–vis–NIR spectroscopy and cyclic voltammetry. Thin‐film morphology was characterized via grazing incidence wide‐angle X‐ray scattering with thin‐film field‐effect transistor measurements further demonstrating the utility of this system. © 2017 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2017 , 55, 2618–2628     

Metal-complex/DNA conjugates: a versatile building block for DNA nanoarrays

The use of DNA networks as templates for forming nanoarrays of metallic centres shows an exciting potential to generate addressable nanostructures. Inorganic units can be photoactive, electroactive and/or can possess magnetic and catalytic properties and can adopt different spatial arrangements due to their varied coordination nature. All these properties influence both the structure and function of passive DNA scaffolds and provide DNA nanostructures as a new platform for new materials in emerging technologies, such as nanotechnology, biosensing or biocomputing.     

6,13-dibromopentacene [2,3:9,10]-bis(dicarboximide): a versatile building block for stable pentacene derivatives

6,13-Dibromopentacene [2,3:9,10]-bis(dicarboximide) (1) was synthesized for the first time by using in situ generated benzo[1,2-c:4,5-c']difuran as a key intermediate. Compound 1 exhibits good photostability in comparison to other pentacene derivatives and it can be further functionalized by Pd-catalyzed coupling reactions to give a series of soluble and stable functional pentacenes.     

Difluorinated Danishefsky's diene: a versatile C(4) building block for the fluorinated six-membered rings

[reaction: see text] A Mg(0)/Me(3)SiCl system was found to be effective for the preparation of difluoro Danishefsky's dienes 2, which involves selective C-F bond cleavage of trifluoromethyl ketones 3. Subsequent hetero Diels-Alder reactions of 2 with aldehydes and imines gave a variety of fluorinated six-membered heterocycles.