Visible-light-induced dearomative spirocyclization of N-benzylacrylamides toward perfluorinated azaspirocyclic cyclohexadienones

A feasible approach to 2-azaspirocyclic cyclohexadienones via visible-light-induced perfluoroalkylation cyclization of N-benzylacrylamides was reported. Using R_f-X (X = I or Br) as the R_f radical source, the reaction underwent a cascade radical addition/dearomative cyclization process by Ir photocatalyst, leading to various 2-azaspiro[4.5]deca-6,9-diene-3,8-diones bearing perfluorinated groups including CF₃, n-C₃F₇, n-C₄F₉, n-C₆F₁₃, n-C₈F₁₇, n-C₁₀F₂₁, CH₂CF₂ and CF₂CO₂Et.     

High-temperature and photochemical syntheses of C60 and C70 fullerene derivatives with linear perfluoroalkyl chains

New experimental results on perfluoroalkylation of C₆₀ and C₇₀ with the use of R_fI (R_f = CF₃, C₂F₅, n-C₃F₇, n-C₄F₉, and n-C₆F₁₃), along with a critical overview of the existing synthetic methods, are presented. For the selected new fullerene (R_f)_n compounds we report spectroscopic, electrochemical and structural data, including improved crystallographic data for the isomers of C₇₀(C₂F₅)₁₀ and C₆₀(C₂F₅)₁₀, and the first X-ray structural data for the dodecasubstituted perfluoethylated C₇₀ fullerene, C₇₀(C₂F₅)₁₂, which possesses unprecedented addition pattern.     

Anionic polymerization initiated by lithium amides for preparing high molecular weight polyacrylonitrile

Lithium amides have been proved to be effective anionic initiators for the anionic polymerization of acrylonitrile to get high molecular weight polyacrylonitrile in this study. Polyacrylonitrile with weightaverage molecular weight ranging from 1.02 × 10~6 g/mol to 1.23 ×10~6 g/mol (M_w/M_n= 1.9-2.2) could be prepared utilizing lithium amides derived from diisopropylamine, diethylamine, hexamethyldisilazane,dicyclohexylamine, and 2,2,6,6-tetramethylpiperidine as initiators. The polymerization of acrylonitrile proceeded in a homogeneous manner in N,N-di methyl for mamide and insignificant contribution of side reactions was confirmed.     

Asymmetric hydrogenation of aromatic ketones catalyzed by achiral monophosphine TPPTS-stabilized Ru in ionic liquids

Achiral monophosphine TPPTS [TPPTS: P(m-C₆H₄SO₃Na)₃]-stabilized Ru was synthesized by reduction of RuCl₃·3H₂O with hydrogen in ethanol using TPPTS as the stabilizer. The catalytic asymmetric hydrogenation of aromatic ketones using TPPTS-stabilized Ru modified by a chiral diamine (1R,2R)-DPENDS [disodium salt of sulfonated (1R,2R)-1,2-diphenyl-1,2-ethylene-diamine] was investigated in hydrophilic ionic liquid [RMIM]Ts (1-alkyl-3-methylimidazolium p-methylphenylsulfonates, R = ethyl, butyl, octyl, dodecyl, hexadecyl). Hundred percent conversion and 85.1% ee were obtained for acetophenone under optimized conditions. The resulting products can be easily separated from the catalyst immobilized in ionic liquid by simple extraction with n-hexane, and the catalyst can be reused several times without a significant loss of ee value or conversion. In particular, the addition of water can improve the catalyst performance.     

[H4tren]3/2·(Al6F24)·3H2O,the most condensed fluoride in the Al(OH)3-tren-HFaq.-ethanol system

The most condensed crystalline fluoride that appears in the Al(OH)₃-tren-HF_aq.-ethanol system at 190 °C is found to be [H₄tren]_3/2·(Al₆F₂₄)·3H₂O. The structure is monoclinic, P2₁/c, with a = 21.939(1) Å, b = 6.7180(2) Å, c = 23.329(1) Å, β = 111.324(2)°. _∞(Al₆F₂₄) chains result from the connection of (Al₇F₃₀)⁹⁻ polyanions by opposite AlF₆ octahedra. Hydrogen bonds are established between the _∞(Al₆F₂₄) chains and ordered or disordered [H₄tren]⁴⁺ cations and water molecules.     

Synthesis and combined properties of novel fluorinated cationic surfactants derived from hexafluoropropylene dimer

Three novel fluorinated surfactants with branched short fluorinated tails as hydrophobic groups, ammonium oxide as polar groups are prepared. Surface tension measurement shows that these fluorinated surfactants are ideal compounds to design new formulations in fire-fighting field.     

New three-dimensional (3,4)-net zincophosphites templated by linear diammonium cations: H3N(CH2)5NH3·Zn3(HPO3)4 and β-H3N(CH2)6NH3·Zn3(HPO3)4

The mild-condition syntheses, single-crystal structures and properties of H₃N(CH₂)₅NH₃·Zn₃(HPO₃)₄ and β-H₃N(CH₂)₆NH₃·Zn₃(HPO₃)₄ are reported. Both are constructed from (3,4)-nets of ZnO₄ tetrahedra and HPO₃ pyramids, sharing vertices to result in three-dimensional anionic open-frameworks. In both materials, the organic species interacts with the framework by way of N–H⋯O bonds. Crystal data: H₃N(CH₂)₅NH₃·Zn₃(HPO₃)₄, M_r = 620.22, orthorhombic, Pccn (No. 56), a = 9.5364 (9) Å, b = 21.8015 (19) Å, c = 9.1118 (7) Å, V = 1894.4 (3) Å³, Z = 4, R(F) = 0.044, wR(F²) = 0.111. β-H₃N(CH₂)₆NH₃·Zn₃(HPO₃)₄, M_r = 634.25, monoclinic, P2₁/n (No. 14), a = 8.7627 (1) Å, b = 13.8117 (2) Å, c = 16.6187 (3) Å, β = 92.680 (1)°, V = 2009.12 (5) Å³, Z = 4, R(F) = 0.072, wR(F²) = 0.187.     

Radical homopolymerization of tetrafluoroethylene initiated by perfluorodiacyl peroxide in supercritical carbon dioxide: Reaction mechanism and initiation kinetics

Radical homopolymerizations of tetrafluoroethylene (TFE) in supercritical carbon dioxide (sc-CO₂) initiated by bis(perfluoro-2-n-propoxypropionyl) peroxide (BPPP) were conducted. Low molecular weight polytetrafluoroethylenes (PTFEs) which are widely used in diverse fields with stable end groups were successfully obtained. PTFEs were characterized by solid-state ¹⁹F NMR and FT-IR spectroscopy. From rational assignment of the characteristic signals, an overall reaction mechanism explaining the homopolymerization processes is proposed. The carboxyl radicals resulted from thermal decomposition of BPPP were completely decarboxylated to n-C₃F₇OCF(CF₃) before reacting with TFE. Additionally, a small amount of n-C₃F₇OCF(CF₃) rearranged into n-C₃F₇ with decreased rearrangement fraction from 0.11 to 0.04 when the reaction temperature was lowered from 35 to 5 °C. Initiation rate constants (k_d) were slightly increased with elevated pressure. The initiation activation energy derived from k_d is 90.3 kJ mol^?1, which is much lower than those of the other systems where nonfluorinated diacyl peroxides are used. Such mechanism and kinetics insights into the homopolymerizations of TFE in sc-CO₂ will be instructive for the syntheses of fluoropolymers with desired properties in future.     

Cavity ring-down observation of Yb3+ optical absorption in room temperature solution

Cavity ring-down spectroscopy is used to probe the optical absorption of the optical pseudo-two level system [Xe]4f¹³ Yb³⁺ in room temperature solution, a situation where the two-color pump-probe luminescence approach commonly used to study the other [Xe]4fⁿ (2 ≤ n ≤ 12) trivalent lanthanide ions fails. A 1 m optical cavity constructed from two highly reflective mirrors is used to obtain ring-down signals as a function of wavelength from 1 mL samples contained in a quartz cuvette placed in the center of the cavity. Absorption spectra constructed from these signals characteristic of the ⁶H_15/2 → ⁴F_9/2 [Xe]4f⁵ Dy³⁺ and the ⁷F₀ → ⁵D₀ [Xe]4f⁶ Eu³⁺ transitions are presented and compared to the corresponding single pass absorption and two-color pump-probe luminescence spectra to obtain sensitivity estimates. Finally the spectrum for the ²F_5/2 → ²F_7/2 [Xe]4f¹³ Yb³⁺ transition for a model Yb³⁺ complex in room temperature solution is obtained using cavity ring-down spectroscopy for the first time.     

Activation process of 3-alkyl-substituted ansa-bis(indenyl) zirconocenes by MAO

The ansa-indene compound {1-Me₂Si(3-C₉H₆Et)₂} (1) was prepared by alkylation of the unsubstituted ansa-indene. This compound was converted, by reaction with nBuLi, to the dilithium compound [Li₂{1-Me₂Si(3-C₉H₅Et)₂}] (2). ansa-Zirconocene [Zr{1-Me₂Si(3-η⁵-C₉H₅Et)₂}Cl₂] (3) was prepared by the reaction of ZrCl₄ with 2 in ether/toluene at −78 °C. The molecular structure of meso-3 was determined by single crystal X-ray diffraction studies. The ansa-zirconocene 3 exhibits a greater activity in ethylene polymerization than reference complexes such as [Zr{1-Me₂Si(η⁵-C₉H₆)₂}Cl₂] and [Zr{1-C₂H₄(η⁵-C₉H₅)₂}Cl₂] and, in addition, it maintained a reasonable level of activity after 12 h of contact with MAO solution. Furthermore, the different elementary steps in the activation process of ethylene polymerization for substituted complexes [Zr{1-Me₂Si(3-η⁵-C₉H₅R)₂}Cl₂] (R = Et 3, Me 4, nPr 5 and nBu 6) by commercial methylaluminoxane (MAO) have been studied by UV–vis spectroscopy. Addition of MAO in large excess ([Al]/[Zr] = 2000) at −78 °C yields a previously unreported intermediate in the activation process of metallocenes; this intermediate has an absorption band centered at λ = 639 nm. We report here the influence of the type of catalyst, ring substitution, type of cocatalyst and addition of THF on the activation process of these metallocenes.     

Organocatalytic chemoselective monoacylation of 1,n-linear disulfonamides

Predominant monoacylation of 1,n-linear disulfonamides took place in the presence of pyrrolidinopyridine-type organocatalysts when the chain length of the linear disulfonamides was n = 3, 4, or 5 (monoacylate/diacylate = up to 44). The chemoselectivity of the competitive acylation between N,N′-ditosyl-1,5-pentanediamine (n = 5) and N,N′-ditosyl-1,3-propanediamine (n = 3) was found to be 36, favoring the former substrate. Different chain length by only one carbon atom was discriminated in the competitive acylation between N,N′-ditosyl-1,5-pentanediamine (n = 5) and of N,N′-ditosyl-1,4-butanediamine (n = 4) with the relative acylation rate of 16 in the presence of the organocatalyst.     

Temperature dependence of the surface tension and 0.1 MPa density for 1-Cn-3-methylimidazolium tris(pentafluoroethyl)trifluorophosphate with n = 2, 4, and 6

Experimental air–liquid interfacial tension data and density data are presented for three 1-C_n-3-methylimidazolium tris(pentafluoroethyl)trifluorophosphates (FAP), [C_nMIM][(C₂F₅)₃PF₃], with n = 2, 4, and 6, measured at atmospheric pressure in the temperature range from 267 K to 360 K using the Krűss K100MK2 tensiometer. The accuracy of the surface tension measurements was checked by employing the Wilhelmy plate and the du Noüy ring methods in parallel. The combined standard uncertainty associated with the Wilhelmy plate method is estimated to be ±0.1 mN · m⁻¹. The density data were obtained using buoyancy method with an estimated standard uncertainty less then ±0.4 kg · m⁻³ (3 · 10⁻⁴ϱ). The chloride anions decrease the density of the tris(pentafluoroethyl)trifluorophosphates of interest up to six times more effectively than they decrease the density of the imidazolium based tetrafluoroborates. A QSPR analysis of the surface tension of imidazolium based ionic liquids with BF₄, TFA, DCA, FAP, NTf₂, and PF₆ anions indicates, that the FAP ionic liquids fit well into the analyzed group of imidazolium based ionic liquids while those having hexafluorophosphate anion show anomalously high deviations of the experimental surface tension from the values predicted by the QSPR model.     

Stereocontrolled self-assembly of luminescent lanthanide helicates and their enantiodifferentiation using Δ-TRISPHAT as the NMR resolving agent

Self-assembled supramolecular lanthanide constructs have great potential in luminescent bioprobes/sensors. Stereoselectivity on the lanthanide assemblies is needed to facilitate chiroptical probes and sensors. Herein we report the stereocontrolled synthesis of M₂L₃-type (M = metal ion, L = organic ligand) lanthanide triple-helicates using a chiral-induction strategy, where the periphery point-chirality [(R,R) or (S,S)] of the organic ligands was transferred into the metal centered chirality (ΔΔ or ΛΛ), thus leading to the formation of topological chiral (P or M) helicates. Moreover, commercially available Δ-TRISPHAT proved to be an effective NMR chiral resolving agent to differentiate between the two enantiomers of the helicate.     

Synthesis of open-framework iron phosphates, [C5N2H14]2[FeIII2F2(HPO4)4]·2H2O and [C5N2H14][FeIII4(H2O)4F2(PO4)4], with one- and three-dimensional structures

The hydrothermal syntheses and structures of two new open-framework iron phosphates, [C₅N₂H₁₄]₂[Fe^III₂F₂(HPO₄)₄]·2H₂O, I, and [C₅N₂H₁₄][Fe^III₄(H₂O)₄F₂(PO₄)₄], II, are presented. While the structure of I consist of FeO₄F₂ octahedra and HPO₄ terahedra linked to form one-dimensional structure, that of II consist of FeO₄(H₂O)₂, FeO₄(H₂O)F, FeO₄F₂ and PO₄ units connected to give rise to a three-dimensional structure. The structure of I resembles the naturally occurring mineral tancoite while II resembles the iron phosphate, ULM-12, [C₆N₂H₁₄][Fe₄(PO₄)₂F₂(H₂O)₃]. Magnetic susceptibility studies indicate anti-ferromagnetic behavior in both the compounds with T_N=200 and 175 K for I and II, respectively. Crystal data: I, monoclinic, space group=P2₁/n (no. 14). a=7.2261(6), b=16.5731(14), c=11.0847(10) Å, β=97.265(2)°, V=1316.8(2) Å³, Z=4, ρ_calc=1.952 g cm⁻¹, μ_(MoKα)=1.446 mm⁻¹, R₁=0.0448 and wR₂=0.1141 for 1882 data [I>2σ(I)]; for II, monoclinic, space group=P2₁/n (no. 14). a=9.9691(3), b=12.4013(3), c=17.3410(3) Å, β=103.762(1)°, V=2082.32(9) Å³, Z=4, ρ_calc=2.576 g cm⁻¹, μ_(MoKα)=3.162 mm⁻¹, R₁=0.0510 and wR₂=0.1064 for 2979 data [I>2σ(I)].     

Adduct formation of [(η7-C7H7)Hf(η5-C5H5)] with isocyanides,phosphines and N-heterocyclic carbenes: An experimental and theoretical study

The reactions of [(η⁷-C₇H₇)Hf(η⁵-C₅H₅)] (1b) with the two-electron donor ligands tert-butyl isocyanide (tBuNC), 2,6-dimethylphenyl isocyanide (XyNC), 1,3,4,5-tetramethylimidazolin-2-ylidene (IMe) and trimethylphosphine (PMe₃) are reported. The 1:1 complexes [(η⁷-C₇H₇)Hf(η⁵-C₅H₅)L] (2b, L = tBuNC; 3b, L = XyNC; 4b, L = IMe, 5b, L = PMe₃) have been isolated in crystalline form, and their molecular structures have been determined by X-ray diffraction analyses. The stabilities of these hafnium complexes were probed via spectroscopic and theoretical methods, and the results were compared to those previously reported for the corresponding zirconium complexes derived from [(η⁷-C₇H₇)Zr(η⁵-C₅H₅)] (1a). The X-ray crystal structure of the PMe₃ adduct [(η⁷-C₇H₇)Zr(η⁵-C₅H₅)(PMe₃)] (5a) was also established.     

Dialkyl- and diaryl-platinum(II) complexes with secondary phosphines: Preparation,structure and thermal reaction giving the metallopolymer

Alkyl and arylplatinum complexes with 1,5-cyclooctadiene ligand, [PtR₂(cod)] (R = Me, Ph, C₆H₄-p-CF₃, C₆F₅), react with secondary phosphines, PHR′₂ (R′ = i-Bu, t-Bu, Ph), to afford the mononuclear platinum complexes, cis-[PtR₂(PHR′₂)₂] (1a: R = Me, R′ = i-Bu; 1b: R = Me, R′ = t-Bu; 1c: R = Me, R′ = Ph; 2a: R = Ph, R′ = i-Bu; 2b: R = Ph, R′ = t-Bu; 2c: R = R′ = Ph; 3a: R = C₆H₄-p-CF₃, R′ = i-Bu; 3b: R = C₆H₄-p-CF₃, R′ = t-Bu; 3c: R = C₆H₄-p-CF₃, R′ = Ph; 4a: R = C₆F₅, R′ = i-Bu; 4c: R = C₆F₅, R′ = Ph) in 81–98% yields. Molecular structures of the complexes except for 1a, 1c and 2a were determined by X-ray crystallography. Complex 1b has a square-planar structure with Pt–C(methyl) bonds of 2.083(8) and 2.109(8) Å, while the Pt–C(aryl) bonds of 2b–c, 3a–c, 4a and 4c (2.055(1)–2.073(8) Å) are shorter than them. Thermal decomposition of 1b, 2a–c, and 3a–c releases methane, biphenyl or 4,4′-bis(trifluoromethyl)biphenyl as the organic products, which are characterized by NMR spectroscopy. The solid product of the thermal reactions of 2b and 2c were characterized as the metallopolymers formulated as [Pt(PR′₂)₂]_n (5b: R′ = ^tBu; 5c: R′ = Ph), based on the solid-state NMR and elemental analyses.     

Hybrid inorganic–organic frameworks containing magnesium: Synthesis and structures of magnesium squarate,diglycolate, and glutarate,and potassium magnesium cyclobutanetetracarboxylate

Four new magnesium containing metal–organic hybrid compounds have been synthesized in an effort to prepare low-density materials for hydrogen storage. The compounds were prepared hydrothermally and characterized using single crystal X-ray diffraction. Three of these compounds are analogs of known transition metal structures with squarate (I, Pn-3n, a = 16.276(5) Å), diglycolate (II, P2₁2₁2₁, a = 6.860(1) Å, b = 9.993(1) Å, c = 10.884(1) Å, R₁ = 0.0341), and glutarate (III, R-3, a = 10.744(2) Å, c = 28.677(5) Å, R₁ = 0.0554) ligands; the fourth is a novel structure using cyclobutanetetracarboxylate (IV, Pccn, a = 9.382(1) Å, b = 14.410(2) Å, c = 8.725(1) Å, R₁ = 0.0465) which contains potassium as well as magnesium cations.     

Asymmetric 1,3-dipolar cycloaddition reaction of α,β-unsaturated nitriles with nitrones catalyzed by chiral-at-metal rhodium or iridium complexes

The aqua complexes (S_M,R_C)-[(η⁵-C₅Me₅)M{(R)-Prophos}(H₂O)](SbF₆)₂ (M = Rh, Ir; (R)-Prophos = 1,2-bisdiphenylphosphino propane) catalyze the 1,3-dipolar cycloaddition reaction (DCR) of nitrones with α,β-unsaturated nitriles with low-to-moderate enantioselectivity. The involved catalysts [(η⁵-C₅Me₅)M{(R)-Prophos}(α,β-unsaturated nitrile)](SbF₆)₂, isolated as mixtures of the (S_M,R_C)- and (R_M,R_C)-diastereomers, have been fully characterized, and the molecular structure of the complexes (S_Rh,R_C)-[(η⁵-C₅Me₅)Rh{(R)-Prophos}(cis-2-pentenenitrile)](SbF₆)₂ and (S_Ir,R_C)-[(η⁵-C₅Me₅)Ir{(R)-Prophos}(acrylonitrile)](SbF₆)₂ has been determined by X-ray diffraction. The (R)-at-metal epimers isomerize to the (S)-at-metal counterparts. Diastereopure (S_M,R_C)-[(η⁵-C₅Me₅)M{(R)-Prophos}(α,β-unsaturated nitrile)](SbF₆)₂ complexes catalyze the above-mentioned DCR in a stoichiometric manner with up to 97% ee. The results make clear the influence of the metal configuration on the catalytic stereochemical outcome. The catalysts can be recycled without significant loss of either activity or selectivity.     

Synthesis of fluorine-containing symmetrical N,N-alkylidene bisamides

Fluorine-containing N,N-alkylidene bisamides RCH(NHCOR_f)₂ (R: H, Aryl; R_f: CF₃, CF₂Cl, 2,6-C₆H₃F₂) are conveniently prepared in good yields by the reaction of corresponding aldehydes with fluorine-containing amides (R_fCONH₂) in the presence of fluoroalkanesulfonic acids R_f′SO₃H(R_f′: CF₃, HCF₂CF₂, ICF₂CF₂OCF₂CF₂).