Toward a highly sensitive and selective indole-rhodamine-based light-up probe for Hg2+ and its application in living cells

We herein designed and synthesized a light-up fluorescent probe L1 for Hg²⁺ species, which is based on indole derivative and Rhodamine fluorophore. The new probe can show a linear response to Hg²⁺ with high sensitivity and selectivity. As the Hg²⁺ concentration changed from 0 to 450 μM, the fluorescence intensity of L1 at 575 nm changed from 50 to 6181 (～120-fold). The detection limit of the probe was 5.0 × 10^?8 M. Besides, we have successfully applied L1 to monitor Hg²⁺ species in living MCF-7 cells by way of fluorescence imaging.     

A Schiff base fluorescence probe for highly selective turn-on recognition of Zn2+

A simple Schiff base CTS, synthesized between 2-hydroxy-1-naphthaldehyde and 2-benzylthio-ethanamine, was found to be a good turn-on fluorescence probe for the detection of Zn²⁺, due to the restriction of the rotation of the bond between CN and naphthalene ring and/or the blocking of the photo-induced electron transfer (PET) mechanism of the nitrogen atom to naphthalene ring. Excellent selectivity for Zn²⁺ was evidenced, over many other competing ions, including Fe³⁺, Cr³⁺, Ni²⁺, Co²⁺, Fe²⁺,Mn²⁺, Ca²⁺, Hg²⁺, Pb²⁺, Cu²⁺, Mg²⁺, Ba²⁺, Cd²⁺, Ag⁺, Li⁺, K⁺, and Na⁺, in EtOH/HEPES buffer (95:5, v/v, pH = 7.4). It was noteworthy that Cd²⁺ had no interference with Zn²⁺. The stoichiometric complex of CTS-Zn²⁺ was determined to be 2:1 for CTS and Zn²⁺ in molar, based on the Job plot and single crystal X-ray diffraction data. The binding constant of the complex was 85.7 M^?2 with a detection limit of 5.03 × 10^?7 M. The fluorescence bio-imaging capability of CTS to detect Zn²⁺ in live cells was also studied. These results indicated that CTS could serve as a favorable probe for Zn²⁺.     

Cu2+-selective turn-on fluorescence signaling based on metal-induced hydrolysis of pyrenecarbohydrazide

We developed a simple Cu²⁺-selective turn-on fluorescence signaling probe based on the hydrolysis of 1-pyrenecarbohydrazide (1) to 1-pyrenecarboxylic acid. Probe 1 exhibited prominent fluorescence signaling of Cu²⁺ ions in a 10% aqueous Tris-buffered (pH 7.0) DMSO solution with a detection limit of 5.93 × 10^?8 M. Signaling with control compounds derived from pyreneacetic acid and pyrenebutyric acid showed that the fluorescence signal became less pronounced as the distance between the hydrazide functionality and the pyrene fluorophore increased. As a practical application, this probe was employed for the determination of Cu²⁺ in a simulated semiconductor wastewater.     

A sensitive tetraphenylethene-based fluorescent probe for Zn2+ ion involving ESIPT and CHEF processes

A new tetraphenylethene-based fluorescent probe 2-(quinolin-8-yliminomethyl)-4-triphenylvinyl-phenol (HL) for detecting Zn²⁺ ion through the excited state intramolecular proton transfer (ESIPT) and chelation enhanced fluorescence (CHEF) processes has been designed and synthesized. The results show that HL emits relatively strong blue fluorescence at 460 nm without Zn²⁺ ion, however, probe HL displays highly pink fluorescent emission at 600 nm when adding Zn²⁺ ion. The fluorescent emission of HL appears an extremely large Stokes shift, which effectively reduces the interference of background signal. The limit of detection of HL for Zn²⁺ ion can reach to 9.0 × 10^–8 M.     

Anthroneamine based chromofluorogenic probes for Hg2+ detection in aqueous solution

Anthroneamine derivatives 1–3 (H₂O:DMSO; 9:1, HEPES buffer, pH 7.0 ± 0.1) undergo highly selective fluorescence quenching with Hg²⁺. The observed linear fluorescence intensity change allows the quantitative detection of Hg²⁺ between 200 nM/40 ppb—12 μM/2.4 ppm even in the presence of interfering metal ions viz. Na⁺, K⁺, Mg²⁺, Ca²⁺, Ba²⁺, Cr³⁺, Fe²⁺, Co²⁺, Ni²⁺, Cu²⁺, Zn²⁺, Ag⁺, Cd²⁺, Pb²⁺. Probes 1–3 and their Hg²⁺ complexes also show the broad pH resistance for their practical applicability.     

Synthesis and evaluation of two novel rhodamine-based fluorescence probes for specific recognition of Fec+ ion

Two low cytotoxic fluorescence probes Rb1 and Rb2 detecting Fe³⁺ were synthesized and evaluated. Rb1 and Rb2 exhibited an excellent selectivity to Fe³⁺, which was not disturbed by Ag⁺, Li⁺, K⁺, Na⁺, NH₄⁺, Fe²⁺, Pb²⁺, Ba²⁺, Cd²⁺, Ni²⁺, Co²⁺, Mn²⁺, Zn²⁺, Mg²⁺, Hg²⁺, Ca²⁺, Cu²⁺, Ce³⁺, AcO^?, Br^?, Cl^?, HPO₄^2?, HSO₃^?, I^?, NO₃^?, S₂O₃^2?, SO₃^2? and SO₄^2? ions. The detection limits were 1.87 × 10^?7 M for Rb1 and 5.60 × 10^?7 M for Rb2, respectively. 1:1 stoichiometry and 1:2 stoichiometry were the most likely recognition mode of Rb1 or Rb2 towards Fe³⁺, and the corresponding OFF–ON fluorescence mechanisms of Rb1 and Rb2 were proposed.     

Imidazo[1,5-α]pyridine-derived fluorescent turn-on probe for cellular thiols imaging with a large Stokes shift

We presented the design, synthesis and preliminary evaluation of the 2,4-dinitrobenzenesulfonate (DNBS) of imidazo[1,5-α]pyridine derivative, NIPY-DNBS, as a turn-on fluorescent probe for the detection of thiols in aqueous solution. The reaction mechanism was confirmed by means of fluorescence, absorption and HRMS. The large Stokes shift (201 nm), high sensitivity (the detection limit for Cys was calculated to be as low as 0.17 μM) and fast response (10 min) of NIPY-DNBS make it a practical and reliable method for fluorescence imaging. Furthermore, application of NIPY-DNBS for the selective detection of intracellular thiols has been successfully demonstrated in living A549 cells.     

Highly selective fluorescence turn-on determination of fluoride ions via chromogenic aggregation of a silyloxy-functionalized salicylaldehyde azine

A novel fluorescent chemsensor TBS-protected salicylaldehyde azine (TSAA) for fluoride ion was developed based on aggregation-induced emission (AIE). The probe TSAA was prepared by the reaction of salicylaldehyde azine (SAA) with tert-butyldimethylsilyl chloride (TBS-Cl) via an unusual synthetic methodology and shows only non-emission. Upon treatment with fluoride in aqueous MeCN solution, the TBS protective group of probe TSAA was removed readily and the fluorescence of the probe was switched on, which resulted in a new fluorescence peak around 543 nm. The fluorescent intensity at 543 nm increases linearly with fluoride ion concentration in the range 1–50 μmol L^?1. This proposed probe shows excellent selectivity toward fluoride ion over other common anions and cations.     

Fused bis[2-(2′-hydroxyphenyl)benzoxazole] derivatives for improved fluoride sensing: The impact of regiochemistry and competitive hydrogen bonding

Development of fluorescent chemical sensors for fluoride is important due to increased use of fluoride in environment. A fused bis[2-(2′-hydroxyphenyl)benzoxazole] 5, which is capable of giving ESIPT emission, is found to be a useful fluorescent sensor for fluoride detection. Upon binding to fluoride, bis(HBO) 5 shows a large spectral shift in both fluorescence (from ～490 nm to ～440 nm) and absorption (from 353 nm to 392 nm). In comparison with the isomeric 4, bis(HBO) 5 dramatically improves the sensitivity in fluoride binding (by an order of magnitude), revealing a large impact of regiochemistry on the sensor performance. ¹H NMR has been used to study the fluoride binding, and to correlate the intramolecular hydrogen bonding with the fluoride response. Sensitivity of 5 towards fluoride is as low as 10^?5 M. Bis(HBO) 5 also showed excellent selectivity towards fluoride while being silent to other anions (Cl^?, Br^?, HS^? and PO₄^3?), thus making 5 a potentially useful probe.     

A benzothizole-based fluorescent probe for Hg2+ recognition utilizing ESIPT coupled AIE characteristics

A new benzothizole-based fluorescent probe 1 for Hg²⁺ recognition utilizing “ESIPT+AIE” strategy has been developed. In THF/H₂O (1:1, v/v, PBS 20 mM, pH = 8.5) mixed solution, probe 1 displays rapid fluorescence responses to Hg²⁺ ions with high selectivity and sensitivity through Hg²⁺-triggered releasing of a compound possessing “ESIPT+AIE” characteristics. Cell imaging investigations indicate that probe 1 is cell permeable with low toxicity to MCF-7 cells, and applicable to detect Hg²⁺ ions in living MCF-7 cells.     

A novel colorimetric chemosensor based on quinoline for the sequential detection of Fe3+ and PPi in aqueous solution

A novel quinoline-functionalized Schiff-base derivative PY was designed and synthesized. Sensor PY displayed highly selective and sensitive fluorescence enhancement and naked-eye color change to Fe³⁺ in the presence of other competing cations. The mechanisms have been supported by Job’s plot evaluation, FT-MS and theoretical calculations. The in situ generated PY-Fe³⁺ complex solution exhibited a high selectivity toward PPi via Fe³⁺ displacement approach. The detection limits of sensor PY to Fe³⁺ and PY-Fe³⁺ complex to PPi were estimated to be 4.24 × 10^?8 M and 8.18 × 10^?8 M, respectively. This successive recognition feature of sensor PY makes it has a potential utility for Fe³⁺ and PPi detection in aqueous solution. A B3LYP/6-31G(d,p) basis set was employed for optimization of PY and PY-Fe³⁺ complex.     

Coumarin-based fluorescent chemosensor for the selective quantification of Zn2+ and AcO− in an aqueous solution and living cells

In this work, we report a novel fluorescence chemosensor HM based on the coumarin fluorophore for the quantification of Zn²⁺ and AcO^?. HM specifically binds to Zn²⁺ in the presence of other competing cations, and evident changes in UV–vis and fluorescence spectra in HEPES buffer are noticed. The in situ generated HM-Zn²⁺ complex solution exhibit a high selectivity toward AcO^? via Zn²⁺ displacement approach. The detection limits of HM for Zn²⁺ and HM-Zn²⁺ for AcO^? were estimated to be 7.24 × 10^?8 M and 9.41 × 10^?8 M, respectively. HM and the resultant complex HM-Zn²⁺ exhibit low cytotoxicity and cell-membrane permeability, which makes them capable of Zn²⁺ and AcO^? imaging in living Hep G2 cells. A B3LYP/6-31G(d,p) basis set was employed for optimization of HM and HM-Zn²⁺ complex.     

A novel fluorescence sensor for K+ based on bis-Bodipy: The ACQ effect controlled by cation complexation of pseudo crown ether ring

Three novel bis-Bodipy 3a–3c bridged with crown ether chain were prepared in yields of 70–78%. Their complexation absorption and fluorescent spectra for fourteen metal ions suggested that compound 3b exhibited the selective response for K⁺ with obvious ACQ effect. The association constant of compound 3b with K⁺ was 4.3 × 10⁵ M^?1 and 1:1 complex mode was deduced. The complexation mechanism of ACQ effect controlled by cation complexation of pseudo crown ether ring was confirmed by the fluorescent titrations, complexation FT-IR spectra, complexation ¹H NMR spectra, complexation ESI-MS spectra and contrast experiment of similar mono-Bodipy derivative. The K⁺ was binded in the cavity of a pseudo crown ether ring, leading to the closed distance for two Bodipy units and then enhancing the ACQ effect obviously. Both the structure of the crown ether chain and two Bodipy units were decisive factors for the selective fluorescence sensor for K⁺.     

A fast,highly selective and sensitive dansyl-based fluorescent sensor for copper (II) ions and its imaging application in living cells

Since the copper ions (Cu²⁺) play a fatal role in many foundational physiological processes, it is important to develop a simple, highly sensitive and selective sensor for Cu²⁺ detection in living systems. Herein, an intramolecular charge transfer (ICT) and dansyl-based fluorescent chemosensor 1 was designed, synthesized and characterized for the sensitive and selective quantification of Cu²⁺. It exhibited remarkable fluorescence quenching upon addition of Cu²⁺ over other selected metal ions, attributed to the complex formation between 1 and Cu²⁺ with the association constant 6.7 × 10⁵ M^?1. The sensor 1 showed a fast and linear response towards Cu²⁺ in the concentration range from 0 to 12.5 × 10^?6 mol L^?1 with the detection limit of 2.5 × 10^?7 mol L^?1. This detection could be carried out in a wide pH range of 5.0–14. Furthermore, sensor 1 can be used for detecting Cu²⁺ in living cells.     

Highly sensitive fluorescent sensor targeting CuCl2 based on thiophene attached anthracene compound (TA)

A novel thiophene attached anthracene (TA) based fluorescent compound was designed and synthesized. The TA showed a high quantum yield (Qy = 0.34) in regard to fluorescence. We applied this TA compound to detect specific metal compound and found that it could identify CuCl₂ from other metals through dramatic fluorescence change at λ_max = 460 nm. It showed strong quenching fluorescence property with CuCl₂ while with other metal compounds it exhibited strong blue fluorescence emission. UV/Vis absorption spectroscopy clearly demonstrated that the quenching property of TA at λ_max = 460 nm was due to overlapping of the fluorescence peak of TA at λ_max = 460 nm and the absorption band of CuCl₂ (from 190 nm to 525 nm). Binding constant (K′), which was 0.0895 mM^?2, indicated a complexation ratio between TA and CuCl₂ as 1:2 and this interaction induced quenching property.     

An ESIPT-based fluorescent probe for sensitive and selective detection of Cys/Hcy over GSH with a red emission and a large Stokes shift

An ESIPT-based fluorescent probe (Probe 1) using acrylate as recognition group for the selective and sensitive detection of cysteine/homocysteine (Cys/Hcy) has been developed. In the presence of Cys/Hcy, this probe was transformed into 1,3-bis(bispyridin-2ylimino)isoindolin-4-ol (dye 4) which displayed red fluorescence with a large Stokes shift (217 nm) when excited. The detection limits are as low as 5.4 nM and 7.0 nM for Cys and Hcy respectively (based on S/N = 3). Importantly, this probe has been successfully demonstrated for the detection of intracellular Cys/Hcy in living cells.     

Dipodal colorimetric sensor for Ag+ and its resultant complex for iodide sensing using a cation displacement approach in water

We synthetized a sulfonamide-based dipodal receptor capable of recognizing Ag⁺ selectively in water in the presence of other possible competing cations through color change. The resultant Ag-complex showed suitability as a chemosensor for the sensing of I^? ions in water in the presence of other anions through a cation displacement process. The detection limits of the receptor for Ag⁺ and of the resultant complex for I^? were identified as 2.43 and 5.31 μM, respectively.     

Synthesis and antiviral bioactivity of novel chalcone derivatives containing purine moiety

A series of novel chalcone derivatives containing purine group was synthesized and evaluated for their antiviral activities against cucumber mosaic virus and tobacco mosaic virus. Compound 3o exhibited remarkable antiviral activities and strong combining capacity to tobacco mosaic virus coat protein.     

Visconata: A rare flavonol having long chain fatty acid from Dodonaea viscosa which inhibits Human neutrophil elastase (HNE)

A series of flavonoids were isolated from Dodonaea Viscosa and tested for inhibition of human neutrophil elastase (HNE), enzyme involved in inflammatory disorders. Isolated compounds were identified as a novel flavonol (1) along with eight known flavonoids (2–9). Novel flavonol, visconata (1) has a very rare skeleton having odd numbered long chain (C19) fatty acid, which was completely identified by mass fragmentation and 2D NMR analysis. All compounds (1–9) inhibited HNE in dose dependent manner with IC₅₀s ranging between 2.4 and 150 μM. Visconata (1) emerged to be the most potent compound with 2.4 μM of IC₅₀. In kinetic studies, compound (1) was observed to be reversible, noncompetitive inhibitor having K_i = 1.8 μM, whereas other flavonoids (2–9) displayed mixed type inhibition.     

Poly(m-ferrocenylaniline) modified carbon nanotubes-paste electrode encapsulated in nafion film for selective and sensitive determination of dopamine and uric acid in the presence of ascorbic acid

A nafion covered carbon nanotubes-paste electrode modified with poly(m-ferrocenylaniline), (Nf/p(FcAni)-CNTsPE), provides a novel voltammetric sensor for the selective determination of dopamine (DA) and uric acid (UA) in the presence of ascorbic acid (AA). We studied the electrochemical activity of Nf/p(FcAni)-CNTsPE toward DA, UA, and AA by differential pulse voltammetry (DPV). DA and UA anodic peaks appear at 0.30 and 0.45 V, respectively while an anodic peak for AA was not observed. DPV oxidation peak values are linearly dependent on DA concentration over the range 1–150 μM (r² = 0.992), and on UA concentration over the range 5–250 μM (r² = 0.997). DA and UA detection limits are estimated to be 0.21 and 0.58 μM, respectively. The modified electrode shows both good selectivity and reproducibility for the selective determination of DA and UA in real samples. Finally, the modified electrode was successfully applied for the determination of DA and UA in pharmaceutical or biological sample fluids.