The concentration effect on the ‘hydrophobic’ and ‘hydrophilic’ behaviour around DMSO in dilute aqueous DMSO solutions. A computer simulation study

We have carried out a molecular dynamics study of dimethyl sulfoxide (DMSO) in water at 298 K at two different densities by simulating two different concentrations: 0.055 and 0.19 mole fraction. We have found an enhancement in the structure of water, an effect that becomes more pronounced as the concentration of DMSO increases. At both concentrations there is a well-defined hydration structure around the oxygen atom of DMSO, which is able to establish strong hydrogen bonds with surrounding water molecules. An increase in the concentration of DMSO depletes the solution of bulk water molecules, reducing the number of hydrogen bonds that water can have in the immediate vicinity of DMSO but increasing the strength of the hydrogen bonds made between the oxygen atom of DMSO and water. There is clear evidence of ‘hydrophobic’ hydration around the methyl groups of DMSO, which is enhanced as the concentration of DMSO increases.     

Electron interaction and ‘memory’ effects in the presence of mixed disorder

We have studied the effect of electron–electron interaction in the presence of mixed disorder on the conductivity and Hall effect of a high-mobility two-dimensional electron gas in a GaAs/AlGaAs heterostructure. A parabolic, negative, temperature-dependent magnetoresistance (MR) and temperature-dependent Hall effect are observed. We show that these effects can be explained in terms of the interaction theory. In addition, a temperature independent, positive MR is observed. This classical MR is also shown to be a consequence of the mixed disorder.     

Raman imaging and stress quantification in self‐assembled graphene oxide fiber ‘Latin Letters’

To probe the intrinsic stress distribution in terms of spatial Raman shift (ω) and change in the phonon linewidth (Γ), here we analyze self‐assembled graphene oxide fibers (GOF) ‘Latin letters’ by confocal Raman spectroscopy. The self‐assembly of GOF ‘Latin letters’ has been explained through surface tension, π–π stacking, van der Waals interaction at the air–water interface and by systematic time‐dependent investigation using field emission scanning electron microscopy analysis. Intrinsic residual stress due to structural joints and bending is playing a distinct role affecting the E_2g mode (G band) at and away from the physical interface of GOF segments with broadening of phonon linewidth, indicating prominent phonon softening. Linescan across an interface of the GOF ‘letters’ reveals Raman shift to lower wavenumber in all cases but more so in ‘Z’ fiber exhibiting a broader region. Furthermore, intrinsic stress homogeneity is observed for ‘G’ fiber distributed throughout its curvature with negligible shift corresponding to E_2g mode vibration. This article demonstrates the significance of morphology in stress distribution across the self‐assembled and ‘smart‐integrable’ GOF ‘Latin letters’. Copyright © 2016 John Wiley & Sons, Ltd.     

Study of the ‘Raman spectroscopic signature of life’ in mitochondria isolated from budding yeast

The ‘Raman spectroscopic signature of life’ is a Raman band at 1602 cm⁻¹ that sharply reflects the metabolic activity of cell mitochondria. Here we report the study of thissignature in isolated yeast mitochondria. The existence and behaviour of the 1602 cm⁻¹ band in isolated mitochondria have been confirmed to be the same as in living yeast cells: the intensity of the band decreases with timewhen a respiration inhibitor, sodium azide, is added. The present study shows the significance of isolated mitochondria in elucidating the origin of this still unassigned Raman band. Copyright © 2009 John Wiley & Sons, Ltd.     

Fractional-dimensional polaron corrections in asymmetric GaAs-Ga1−xAlxAs quantum wells

Polaron effects in asymmetric GaAs-Ga_1−xAl_xAs quantum wells (QWs) are investigated within the framework of the fractional-dimensional space approach and by using second-order perturbation theory. A well-width dependence of the polaron corrections with a dip and a peak is obtained for both symmetric and asymmetric QWs. The dip and the peak occur in the case of asymmetric QWs for larger well widths than in the case of symmetric QWs. An enhancement of the contrast between the dip and the peak of the polaron energy shift is found for the case of asymmetric QWs. These results show the convenience of using asymmetric QWs instead of symmetric ones in any experimental attempt of detecting the dip and the peak of the polaron energy shift.     

Effect of signal intensity normalization on the multivariate analysis of spectral data in complex ‘real‐world’ datasets

Spectral signal intensities, especially in ‘real‐world’ applications with nonstandardized sample presentation due to uncontrolled variables/factors, commonly require additional spectral processing to normalize signal intensity in an effective way. In this study, we have demonstrated the complexity of choosing a normalization routine in the presence of multiple spectrally distinct constituents by probing a dataset of Raman spectra. Variation in absolute signal intensity (90.1% of total variance) of the Raman spectra of these complex biological samples swamps the variation in useful signals (9.4% of total variance), degrading its diagnostic and evaluative potential. Using traditional spectral band choices, it is shown that normalization results are more complex than generally encountered in traditionally designed sample sets investigating limited chemical species. We demonstrate that no choice of a single band proves to be appropriate for predicting all the reference parameters, instead requiring a tailored normalization routine for each parameter. Of the reference parameters studied in the chosen system, signals from pathogenic adducts in ocular tissues called advanced glycation endproducts were most prominent when normalizing about the 1550–1690 cm⁻¹ region of the spectrum (17.5% of total variance, compared with 0.3% for unnormalized), while prediction of pentosidine and gender were optimized by normalization about the 1570 (R² = 0.97 vs 0.57 for unnormalized) and 1003 cm⁻¹ (p < 0.0000001 vs p < 0.01 for unnormalized) bands, respectively. The data obtained point to the extreme sensitivity of multivariate analysis to signal intensity normalization. Some general guidelines for making appropriate band choices are given, including the use of peak‐finding routines. Copyright © 2008 John Wiley & Sons, Ltd.     

A stable ‘sandwich’ system of Surface‐Enhanced Resonance Raman Scattering for the analysis of β‐carotenes in a photosynthetic pigment‐protein complex

In plants, Photosystem I (PSI) is composed of a core complex and a membrane‐associated antenna complex light‐harvesting complex I that captures light and funnels its energy to the core complex. To obtain Raman structural information on β‐carotenes embedded in the PSI core complex, a ‘sandwich’ system of roughened silver slice: target protein complexes: single silver nanoparticles was fabricated for Surface‐Enhanced Resonance Raman Scattering (SERRS) measurements. This study provided a method to overcome spectral irreproducibility, which is the main drawback of Surface‐Enhanced Raman Scattering/SERRS‐based studies. The Raman spectra of β‐carotenes embedded in the PSI core complex can be obtained at very low sample concentrations (1–5 µg Chl/ml) and high signal/noise ratios. The β‐carotenes in the spinach PSI core complex were predominantly all‐trans configuration. The membrane protein‐mediated adsorption of silver nanoparticles induced the uniform distribution of a large number of single nanoparticles, which contributed to achieving highly reproducible SERRS spectra. This study is the first to apply single silver nanoparticle‐based SERRS analysis in membrane proteins. Copyright © 2013 John Wiley & Sons, Ltd.     

Detection of functional states by the ‘LAMDA’ classification technique: application to a coagulation process in drinking water treatment

The present Note proposes a learning classification methodology to identify functional states on a coagulation process involved in drinking water treatment. In this work, we chose to carry out the supervised control of this process while using the LAMDA (Learning Algorithm for Multivariate Data Analysis) classification technique. The LAMDA classification technique proposes the interactive participation of the expert operator during the learning phase and in the optimisation of the classification. In this work, all information stemming from the environment process as well as expert knowledge has been aggregated and exploited. The application chosen for state identification is the Rocade drinking water treatment plant located at Marrakech, Morocco. To cite this article: B. Lamrini et al., C. R. Physique 6 (2005).     

Nondestructive elemental depth profiling of Japanese lacquerware ‘Tamamushi‐nuri’ by confocal 3D‐XRF analysis in comparison with micro GE‐XRF

We have applied recently two XRF (micro x‐ray fluorescence) methods [micro‐Grazing Exit XRF (GE‐XRF) and confocal 3D‐XRF] to Japanese lacquerware ‘Tamamushi‐nuri.’ A laboratory grazing‐exit XRF (GE‐XRF) instrument was developed in combination with a micro‐XRF setup. A micro x‐ray beam was produced by a single capillary and a pinhole aperture. Elemental x‐ray images (2D images) obtained at different analyzing depths by micro GE‐XRF have been reported. However, it was difficult to directly obtain depth‐selective x‐ray spectra and 2D images. A 3D XRF instrument using two independent polycapillary x‐ray lenses and two x‐ray sources (Cr and Mo targets) was also applied to the same sample. 2D XRF images of a Japanese lacquerware showed specific distributions of elements at the different depths, indicating that ‘Tamamushi‐nuri’ lacquerware has a layered structure. The merits and disadvantages of both the micro GE‐XRF and confocal micro XRF methods are discussed. Copyright © 2009 John Wiley & Sons, Ltd.     

Isomerization and rearrangement of (E)‐ and (Z)‐phenylhydrazones of 3‐benzoyl‐5‐phenyl‐1,2,4‐oxadiazole: evidence for a ‘new’ type of acid‐catalysis by copper(II) salts in mononuclear rearrangement of heterocycles

A kinetic investigation in methanol of the title reaction has evidenced the occurrence of two processes: the 1‐ E 1‐ Z isomerization and the rearrangement of the (Z)‐isomer into the relevant 4‐benzoylamino‐2,5‐diphenyl‐1,2,3‐triazole ( 1‐ Z → T ). The latter reaction is in line with the ability of the (Z)‐phenylhydrazones of 3‐benzoyl‐1,2,4‐oxadiazoles to undergo the so called mononuclear rearrangement of heterocycles (MRH). The occurrence of both the examined reactions is dependent on a Lewis‐acid‐catalysis. The obtained results have shown the possibility of a ‘new’ type of acid‐catalysis (bifunctional catalysis by Lewis salts) in the MRH. This catalysis operates through a completely different mechanism with respect to the one recently observed, and deeply investigated, in the presence of protic acids for the (Z)‐phenylhydrazone of 5‐amino‐3‐benzoyl‐1,2,4‐oxadiazole, in both dioxane/water and toluene, for which the catalytic process was dependent on the protonation of N(4) ring‐nitrogen of the 1,2,4‐oxadiazole. As a matter of fact, the copper salts seem able to interact with the >C?N? NH? C₆H₅ moiety, yielding adducts which, in some cases, are prone to both isomerize and rearrange. Therefore, a similar behaviour in some manner parallel to that already observed in benzene in the presence of aliphatic amines (base‐catalysis) has been evidenced. Copyright © 2008 John Wiley & Sons, Ltd.