Extractive spectrophotometric determination of dioxouranium(VI) with the sodium salt of hexamethyleneiminecarbodithioate

The optimum conditions for the extractive spectrophotometric determination of dioxouranium(VI) with hexamethyleneiminecarbodithioate(HMICdt) have been established. Dioxouranium(VI) reacts with this ligand at pH 4.5 to form a yellowish-orange uncharged 12 metal-ligand complex which can be extracted by chloroform. The calibration graph was linear in the range of 1–20 g ml^–1 of dioxouranium(VI) at 335 nm. The molar absorptivity of the extracted species is 5.952×10³ l mol^–1 cm^–1 with Sandell's sensitivity of 0.04 g cm^–2. The average of 10 determinations of dioxouranium was 49.75 g for the samples containing 50 g of U(VI) and the variation from the mean at 95% confidence limit was 49.75±0.5955.     

Simultaneous determination of chromium(VI) and chromium(III) by flame atomic absorption spectrometry with a chelating ion-exchange flow injection system

Summary Simultaneous Determination of Chromium(VI) and Chromium(III) by Flame Atomic Absorption Spectrometry with a Chelating Ion-Exchange Flow Injection System A simple method is described for the simultaneous determination of chromium(VI) and chromium(III) in a flow injection system comprising chelating ion-exchange and flame atomic absorption spectrometry. Sampling rates for 2001 and 1 ml sample volumes were 120 and 60 h^–1 (240 and 120 speciations per hour), respectively. Typical relative standard deviations were 0.52% for Cr(VI) (0.50g ml^–1 and 0.67% for Cr(III) (0.10,g ml^–1) and the corresponding limits of detection were 85 ng ml^–1, and 16 ng ml^–1, respectively.On leave from University of Belgrade.     

Spectrophotometric determination of vanadium(IV) in the presence of vanadium(V) using Br-PADAP

In the present paper, a simple and sensitive method is proposed for vanadium(IV) determination in the presence of vanadium(V). This is based on the oxidation of vanadium(IV) present in the sample to vanadium(V) by addition of iron(III) cation, followed by a complexation reaction of iron(II) with the spectrophotometric reagent 2-(5-bromo-2-pyridylazo)-5-diethylaminophenol (Br-PADAP). The iron(II) reacts with Br-PADAP immediately, forming a stable complex with a large molar absorptivity. The vanadium(IV) determination is possible, with a calibration sensitivity of 0.549 g ml^–1, for an analytical curve of 18.8 ng ml^–1 to 2.40 g ml^–1, molar absorptivity of 2.80 × 10⁴ 1 mole^–1 cm^–1 and a detection limit of 5.5 ng ml^–1. Selectivity was increased with the use of EDTA as a masking agent. The proposed method was applied for the vanadium(IV) determination in the presence of several amounts of vanadium(V). The results revealed that 200 g of vanadium(V) do not interfere with determination of 5.00 g of vanadium(IV). The precision and the accuracy obtained were satisfactory (R. S. D.<2%).     

Spectrophotometric studies on the platinum(IV)-prochlorperazine bismethanesulfonate complex

We have studied the formation of a platinum complex and developed a simple, rapid and sensitive spectrophotometric method for the determination of platinum in solution. The method is based on the complexation reaction of the chromogen, prochlorperazine bismethane-sulfonate (PCPMS), with platinum(IV) in phosphoric acid medium which forms a reddish brown 1 1 complex with an absorption maximum around 528 nm. The reaction is fast in the presence of copper(II) and goes to completion within 1 min. Beer's law is obeyed over the concentration range 0.3–7.2 g/ml of platinum(IV) with an optimal range of 1.2–6.6 g/ml. The molar absorptivity is 2.65 × 10⁴1 mol^–1 cm^–1 and the Sandell's sensitivity is 7.8 ng cm^–2. The stability constant, logK, of the complex is 4.96±0.1 at 25 ° C. The effects of time, temperature, concentrations of acids, PCPMS and copper(II), and the interference by various ions are investigated. The method has been successfully applied to the determination of platinum content in alloys and minerals.     

Extraction and spectrophotometric determination of uranium(VI) withN-phenylcinnamohydroxamic acid

Uranium(VI) reacts withN-phenylcinnamohydroxamic acid to form an orange-yellow complex in the pH range 5.5–8.5. The orange-yellow complex, having the composition of 12 (metal:ligand), is quantitatively extractable into ethyl acetate. The spectrum of the complex exhibits a maximum absorption at 400 nm with a molar absorptivity of 6500 M^–1·cm^–1. The coloured system obeys Beer's law in the concentration range 2–40g·ml^–1 of uranium(VI). The photometric sensitivity of the colour reaction is 0.037 g·cm^–2 of uranium(VI). Most of the common ions do not interfere and the method has been found to be simple, precise, and free from the rigid control of experimental conditions. The method has been applied to the determination of uranium in synthetic matrices and potable water.     

A sensitive spectrophotometric method for the determination of trace amounts of uranium (VI) using o-hydroxypropiophenone isonicotinoyl hydrazone

The reaction between uranium (VI) and o-hydroxypropiophenone isonicotinoyl hydrazone (OHPINH) has been investigated in HCl-sodium acetate buffers and a highly sensitive and simple procedure for the determination of uranium (VI) is suggested. The yellow colored complex showed maximum absorption at 380 nm in buffer solutions of pH 3. Beer's law is obeyed in the range of 0.47–17 g ml^–1. The molar absorptivity and Sandell sensitivity are found to be 1.15×10⁴ dm³ mol^–1 cm^–1 and 0.02 g cm^–2, respectively. The composition of the complex is found to be 11 between metal and reagent.     

Extraction-spectrophotometric determination of uranium(VI) with PAR and N-octylacetamide

A new and simple method for selective spectrophotometric determination of uranium(VI) with 4-(2-pyridylazo)resorcinol (PAR) and N-octylacetamide into benzene over pH 7.0–9.0 is described. The molar absorptivity of the complex with 9 different amides is in the range of (0.40–3.2)·10⁴ 1·mol^–1·cm^–1 at the absorption maximum. Out of these, the most sensitive compound N-octylacetamide (OAA) was chosen for detailed studies in the present investigation. The detection limit of the method is 0.008 g U·ml^–1. The system obeys Beer's law in the range of 0–5 g U·ml^–1. The method is free from interferences of most of the common metal ions except vanadium(V) and copper(II), which are masked by proper masking agents. The composition of the complex is determined by curve-fitting method. The method has been applied for the recovery of the metal from rock samples and synthetic mixtures.     

Flow injection method for the fluorimetric determination of Zn with 8-(benzenesulphonamido) quinoline

The development of a fluorimetric method for the determination of zinc, based on the fluorescence of the zinc-8-(benzenesulphonamido) quinoline chelate in a micellar medium of sodium dodecylsulfate, is reported. The detection limit is 0.2 g l^–1, the working range is 0.5–700 g l^–1, and the sample throughput is 145 h^–1. The method was evaluated for the determination of zinc in food samples.A batch procedure for the simultaneous determination of zinc and cadmium, based on the synchronous and derivative spectra, is also proposed.     

2-(2-Thiazolylazo)-pcresol (TAC) as a reagent for the spectrophotometric determination of titanium (IV)

The reaction between titanium(IV) and 2-(2-thiazolylazo)-p-cresol-(TAC) in aqueous methanol media at apparent pH 4.0–5.6 results in a intensely coloured complex that is stable for at least 2 h. The combining ratio is 1 1 cation TAC. Beer's law is obeyed up to 5.0 g/ml titanium(IV) at 580 nm. The apparent molar absorptivity at 580 nm is 9.82.10³ l.mole^–1.cm^–1 and the detection limit obtained was 5 ng/ml titanium (IV). A spectrophotometric method for the simultaneous determination of titanium and iron with TAC is proposed.     

A kinetic determination of ultramicro quantities of manganese(II), molybdenum(VI) and tungsten(VI) on the basis of their catalytic action on the oxidation of Azorubin S by hydrogen peroxide

Summary A study has been made of the kinetics of catalytic oxidation of Azorubin S by hydrogen peroxide in the presence of Mn(II), Mo(VI) and W(VI) in order to find optimal conditions for the kinetic catalytic determination of these elements. Manganese(II), molybdenum(VI) and tungsten(VI) were determined in the concentration ranges 5.5–33.0×10^–3, 1.3–8.1 and 5.9–44.1g/ml, respectively. Standard deviations were less than 11%. The effect of some foreign ions on these determinations was also investigated.

---

Zusammenfassung Die Kinetik der katalytischen Oxydation von Azorubin S mit Wasserstoffperoxid in Anwesenheit von Mn(II), Mo(VI) und W(VI) wurde untersucht, um die optimalen Bedingungen für deren kinetisch-katalytische Bestimmung zu finden. Mn(II) wurde im Konzentrationsbereich von 5,5–33,0×10^–3, Mo(VI) von 1,3–8,1 und W(VI) von 5,9–44,1g/ml mit Standardabweichungen <11% bestimmt. Außerdem wurden einige der möglichen Störungen untersucht.

---

---

This work was presented in part at the 20th Annual Meeting of the Serbian Chemical Society, Belgrade, January 17, 1977.     

Determination of fluoride by spectrophotometry of Arsenazo(III) complex of the back-extracted Th(IV)

A method based on the back-extraction of Th(IV) from its TTA complex in benzene by aqueous F^– followed by spectrophotometric measurement of Th(IV), for the determination of fluoride has been developed. The coefficients of variation obtained are 2.4% and 1.4% in 11 determinations at F^– concentration levels of 1.0 g ml^–1, respectively.     

Atomic-absorption spectrophotometric determination of ultramicro amounts of selenium(IV) and total selenium in sulphuric acid

Summary Ultramicro amounts of selenium in sulphuric acid are determined by a new atomic absorption spectrophotometric method. Selenium(IV) is directly determined ater extraction into toluene with an aromatic o-diamine and addition of nickel(II) prior to atomization; the determination of total selenium (0, IV and VI) needs a treatment of the sample with selected oxidizing and reducing agents.In the studied samples, total selenium (0.003–0.022 g of Se in 1 ml sulphuric acid) is present only in the tetravalent state. The detection limit of the method is 0.003 g of selenium.

---

Atomabsorptions-spektralphotometrische Bestimmung von Ultramikromengen Selen(IV) und Gesamtselen in Schwefelsäure

Zusammenfassung Selen(IV) kann direkt bestimmt werden nach Toluolextraktion der mit einem aromatischen o-Diamin behandelten Lösung und Zusatz von Nickel(II). Die Bestimmung von Gesamtselen (0, IV, VI) erfordert eine Vorbehandlung mit Perchlor- bzw. Salpetersäure und Wasserstoffperoxid. Die Nachweisgrenze des Verfahrens beträgt 0,003 g Se. In den untersuchten Proben war das Gesamtselen (0,003–0,022 g/ml) nur als Se(IV) vorhanden.

     

4-(21-thiazolylazo) resacetophenone oxime. A new analytical reagent for the spectrophotometric determination of uranium (VI)

4-(2¹-Thiazolylazo) resacetophenone oxime forms a pink colored soluble complex with uranium(VI) in buffer solutions of pH 6.0. The colored complex has a maximum absorbance at the wavelength 572 nm and the color is stable for about 48 h. The system obeys Beer's law over the concentration range 0.2–6.0 g of uranium cm^–3. The molar absorptivity and the Sandell sensitivity of the complex are 6.2×10⁴ dm³.mol^–1.cm^–1 and 0.0038 g cm^–2, respectively. Effect of various diversions has been studied and the method was successfully applied for the determination of uranium in rock samples.     

Tris(2-ethylhexyl)phosphate as an extractant for quadrivalent tin,with subsequent determination with pyrocatechol violet in alloy samples

The solvent extraction of tin(IV) from chloride media withtris(2-ethylhexyl)phosphate is presented. Tin(IV) is extracted quantitatively from 2.75–3.20 mol dm^–3 hydrochloric acid using 6.38–6.91 mol dm^–3 tris(2-ethyl-hexyl)phosphate dissolved in toluene as an extractant. After back-extraction of tin(IV) with water from thetris(2-ethylhexyl)phosphate phase, it is estimated spectrophotometrically following complexation with pyrocatechol violet. The recommended range for determination of tin(IV) is 10–100 g. The probable extracted species is SnCl₄·2TEHP. The method is applicable to the analysis of alloy samples with a detection limit of 0.4 g/ml (for 10 g of tin) and a relative standard deviation between 0.21–0.32%.     

3-Hydroxy-2-(2-thienyl)-4H-chromen-4-one as a new reagent for the extraction and trace determination of molybdenum(VI)

A simple, sensitive and selective method for the extraction and trace determination of molybdenum(VI) has been developed; it is based on its reaction with 3-hydroxy-2-(2-thienyl)-4H-chromen-4-one (HTC) in sulphuric acid medium. The 1:2 Mo (VI)-HTC yellow complex is quantitatively extractable into chloroform (_max 420 nm) and is stable for more than 4 h. The procedure eliminates the interference of a large number of metal ions and complexing agents. Beer's law is obeyed in the range of 0–2.85 g Mo/mL with a molar absorptivity, Sandell's sensitivity and standard deviation of 5.28×10⁴ L mol^–1 cm^–1, 0.0018 g Mo/cm² and ±0.0054, respectively. The method has successfully been used for the spectrophotometric determination of molybdenum in steel samples.     

Study of Cr(VI)-2-oximinodimedone dithiosemicarbazone reaction and simultaneous determination of Cr(VI) and Fe(III)

Summary 2-Oximinodimedone dithiosemicarbazone reacts with Cr(VI) in strongly acid medium. The orange colour obtained has been used to propose a spectrophotometric method of Cr(VI) determination in the concentration range 0.40–9.5g ml^–1 (=5600 mole^–1-cm^–1 at 485 nm). The stoichiometry of the reaction is 32 (reagentCr(VI)) which is in accordance with the oxidation reaction of the reagent by Cr(VI). The method has been applied to the determination of Cr(VI) and Fe(III) in ceramic materials.

---

Eine Studie zur Cr(VI)-2-oximinodimedondithiosemicarbazon-Reaktion und die simultane Bestimmung von Cr(VI) und Fe(III)

Zusammenfassung 2-Oximinodimedonedithiosemicarbazon reagiert in stark saurem Milieu mit Cr(VI). Die orange Farbe kann im Konzentrationsbereich von 0.4–9,5g/ml zur spektrophotometrischen Cr(VI)-Bestimmung verwendet werden (=5600 1 mol^–1cm^–1bei 485 nm). Die Stöchiometrie der Reaktion ist 32 (Reagens: Cr(VI)) und entspricht der Oxidation des Reagens durch Cr(VI). Die Methode wurde zur Bestimmung von Cr(VI) und Fe(III) in keramischen Materialien eingesetzt.

     

Rapid extraction and photometric determination of cerium(IV) with N-p-tolylbenzohydroxamic acid (p-TBHA)

Summary A method for rapid extraction and spectrophotometric determination of cerium (IV) is described. The cerium-N-p-tolylbenzo-hydroxamic acid complex is extracted into chloroform at the pH 8.4 to 9.8. Maximum absorbance occurs between 460 and 470 nm. The values are reproducible at 465 nm and Beer's law is obeyed at this wavelength over the range of 0.03–40, per ml of the cerium(VI). The molar absorptivity of the cerium-p-TBHA complex is 4.6×10³ l · mole^–1 · cm^–2 at 465. An attempt has been made to determine the cerium in sea water.

---

Zusammenfassung Eine Methode zur schnellen Extraktion und spektrophotometrischen Bestimmung von Cer(IV) wurde beschrieben. Der Cer-Komplex mit N-p-Tolylbenzohydroxamsäure wird bei pH 8,4–9,8 mit Chloroform extrahiert. Das Absorptionsmaximum liegt zwischen 460 und 470 nm. Bei 465 nm sind die Ablesungen reproduzierbar und wird das Beersche Gesetz zwischen 0,03 und 40g Cer/ml erfüllt. Die molare Extinktion des genannten Komplexes beträgt bei 465 nm 4,6 · 10³ l · mol^–1 · cm^–2. Es wurde versucht, den Cergehalt von Meerwasser zu bestimmen.

     

Extraction-spectrophotometric determination of nickel as Ni-(PAR)2-(CTAB)2 complex in polymetallic sea-bed nodules and steels

A red, water-soluble complex of nickel with PAR can be extracted into chloroform with CTAB at pH 7.0. The system obeys Beer's law upto 0.5 g/ml with a molar absorptivity of 45 200 L·mol^–1·cm^–1 at 540 nm. Job's method of continuous variations revealed that the composition of the extracting species is 1:2:2 for nickel:PAR:CTAB. Based on this extraction, a highly sensitive and selective spectrophotometric method for the determination of nickel in polymetallic sea-bed nodules and in steels, after prior separation of iron and manganese, was developed. The standard deviation was 0.04–0.127 g for 5–25 g of nickel.     

Spectrophotometric determination of uranium(VI) with 1-(2′-thiazolylazo)-2-naphthol in the presence of Trition X-100

Uranium(VI) reacts with 1-(2-thiazolylazo)-2-naphthol to form a red-coloured chelate in the pH range 5.3–7.2, maintained by 0.04 M acetate buffer. Absorbance of the sparingly soluble complex, solubilized and stabilized by Triton X-100, is measured after 30 min and it is stable for at least 16 hours. The complex exhibits maximum absorbance at 575 and 625–630 nm, but absorbance at longer wavelengths is not stable. The 12 complex obeys Beer's law over the concentration range 0.4–6.4 g of uranium(VI) per cm³, has molar absorptivity 3.36·10⁴ dm³·mol^–1·cm^–1, Sandell sensitivity 7.0 ng·cm^–2, formation constant (log K) 9.32 and coefficient of variation ±0.77%. Effect of 60 ions has been studied and selectivity improved considerably in presence of CDTA. The method has been applied for determination of uranium content in a rock sample.     

Spectrophotometric determination of microgram amounts of chromium(VI) and total chromium in waste water

Summary A spectrophotometric method has been developed for the determination of chromium in waste water with 5-Br-PADAP (2-(5-brorno-2-pyridylazo)-5-diethylaminophenol). Chromium(III) forms a blue-purple complex at pH 4.7 upon heating. The color is very stable and is highly sensitive for chromium. At 600 nm it obeys Beer's law in the concentration range of 0–15g of Cr(III) per 25 ml. The sensitivity and molar absorptivity of the reaction are 0.00065g of Cr(III) per cm² and 7.93×10⁴1 · mole^–1 · cm^–1, respectively. The continuous variation and molar ratio methods indicate that chromium forms 12 complex with the ligand.

---

Spektrophotometrische Bestimmung von Mikrogramm-Mengen Chrom(VI) und Gesamt-Mengen Chrom in Abwasser

Zusammenfassung Eine spectrophotometrische Methode zur Bestimmung von Chrom in Abwasser mit 5-Br-PADAP wurde ausgearbeitet. Chrom(III) bildet mit 5-Br-PADAP bei pH 4,7 durch Erhitzen einen blaupurpurnen Komplex. Die Farbe ist sehr beständig. Bei 600 nm entspricht die Färbung dem Beerschen Gesetz zwischen 0 und 15g Cr(III)/25 ml. Die Empfindlichkeit der Reaktion beträgt 0,00065g Cr(III)/cm² und die molare Absorption 7.93×10⁴ 1 · mol^–1 · cm^–1. Die Untersuchung nach Job ergab für den Komplex das Molverhältnis Cr:Reagens=12.