Mechanistic study of electrocatalytic oxidation of formic acid at platinum in acidic solution by time-resolved surface-enhanced infrared absorption spectroscopy

Surface-enhanced infrared absorption spectroscopy (SEIRAS) combined with cyclic voltammetry or chronoamperometry has been utilized to examine kinetic and mechanistic aspects of the electrocatalytic oxidation of formic acid on a polycrystalline Pt surface at the molecular scale. Formate is adsorbed on the electrode in a bridge configuration in parallel to the adsorption of linear and bridge CO produced by dehydration of formic acid. A solution-exchange experiment using isotope-labeled formic acids (H(12)COOH and H(13)COOH) reveals that formic acid is oxidized to CO(2) via adsorbed formate and the decomposition (oxidation) of formate to CO(2) is the rate-determining step of the reaction. The adsorption/oxidation of CO and the oxidation/reduction of the electrode surface strongly affect the formic acid oxidation by blocking active sites for formate adsorption and also by retarding the decomposition of adsorbed formate. The interplay of the involved processes also affects the kinetics and complicates the cyclic voltammograms of formic acid oxidation. The complex voltammetric behavior is comprehensively explained at the molecular scale by taking all these effects into account.     

Biochemical applications of surface-enhanced infrared absorption spectroscopy

An overview is presented on the application of surface-enhanced infrared absorption (SEIRA) spectroscopy to biochemical problems. Use of SEIRA results in high surface sensitivity by enhancing the signal of the adsorbed molecule by approximately two orders of magnitude and has the potential to enable new studies, from fundamental aspects to applied sciences. This report surveys studies of DNA and nucleic acid adsorption to gold surfaces, development of immunoassays, electron transfer between metal electrodes and proteins, and protein–protein interactions. Because signal enhancement in SEIRA uses surface properties of the nano-structured metal, the biomaterial must be tethered to the metal without hampering its functionality. Because many biochemical reactions proceed vectorially, their functionality depends on proper orientation of the biomaterial. Thus, surface-modification techniques are addressed that enable control of the proper orientation of proteins on the metal surface. Figure Surface enhanced infrared absorption spectroscopy (SEIRAS) on the studies of tethered protein monolayer (cytochrome c oxidase and cytochrome c) on gold substrate (left), and its potential induced surface enhanced infrared difference absorption (SEIDA) spectrum     

Radiolysis of ferrocyanide solutions studied by infrared spectroscopy

The behavior of the neutral and basic aqueous ferrocyanide system under irradiation is investigated using the coupling of a LINAC with infrared spectroscopy. The comparison between the neutral and basic system evidences the formation of the hydroxopentacyanoferrate (III) ions and gives information on the reaction mechanisms. The pseudo-protective effect of the dissolved dioxygen on the ferrocyanide is explained via a mechanism implying the superoxide radical anion.     

Extending in situ attenuated-total-reflection surface-enhanced infrared absorption spectroscopy to ni electrodes

Surface-enhanced infrared absorption spectroscopy (SEIRAS) in the attenuated-total-reflection configuration (ATR-SEIRAS) has been applied for the first time to Ni electrodes. SEIRA-active Ni electrodes were obtained through initial chemical deposition of a 60-nm-thick Au underlayer on the reflecting plane of an ATR Si prism followed by potentiostatic electrodeposition of a 40-nm-thick Ni overlayer in a modified Watt's electrolyte. The Ni nanoparticle film thus obtained exhibited exceptionally enhanced IR absorption for the surface probe molecule CO while maintaining unipolar and normally directed bands. With the advantages of ATR-SEIRAS, free H2O molecules coadsorbed with CO at the Ni electrode were revealed, and their role in the electrooxidation of the CO adlayer at the Ni electrode is discussed. In addition, the conversion of bridge to linearly bonded CO at Ni electrode in a neutral solution was clearly identified upon electrooxidation of the CO adlayer. ATR-SEIRAS was also used to characterize the adsorption configuration of a pyridine adlayer at the Ni electrode. Both A1 and B1 modes of adsorbed pyridine were detected with comparably large intensities, essentially maintaining the spectral feature of pyridine molecules rather than that of "alpha-pyridyl species", which strongly suggests an "edge-tilted pyridine" configuration present at the Ni electrode, a configuration intermediate between the "end-on pyridine" and "edge-on alpha-pyridyl" adsorption modes reported in the literature.     

Potential oscillations in galvanostatic electrooxidation of formic acid on platinum: a time-resolved surface-enhanced infrared study

The mechanism of temporal potential oscillations that occur during galvanostatic formic acid oxidation on a Pt electrode has been investigated by time-resolved surface-enhanced infrared absorption spectroscopy (SEIRAS). Carbon monoxide (CO) and formate were found to adsorb on the surface and change their coverages synchronously with the temporal potential oscillations. Isotopic solution exchange (from H13COOH to H12COOH) and potential step experiments revealed that the oxidation of formic acid proceeds dominantly through adsorbed formate and the decomposition of formate to CO2 is the rate-determining step of the reaction. Adsorbed CO blocks the adsorption of formate and also suppresses the decomposition of formate to CO2, which raises the potential to maintain the applied current. The oxidative removal of CO at a high limiting potential increases the coverage of formate and accelerates the decomposition of formate, resulting in a potential drop and leading to the formation of CO. This cycle repeats itself to give the sustained temporal potential oscillations. The oscillatory dynamics can be explained by using a nonlinear rate equation originally proposed to explain the decomposition of formate and acetate on transition metal surfaces in UHV.     

From HCOOH to CO at Pd electrodes: a surface-enhanced infrared spectroscopy study

The decomposition of HCOOH on Pd surfaces over a potential range of practical relevance to hydrogen production and fuel cell anode operation was probed by combining high-sensitivity in situ surface-enhanced IR spectroscopy with attenuated total reflection and thin-layer flow cell configurations. For the first time, concrete spectral evidence of CO(ad) formation has been obtained, and a new main pathway from HCOOH to CO(ad) involving the reduction of the dehydrogenation product of HCOOH (i.e., CO(2)) is proposed.     

Aggregation of methylene blue in frozen aqueous solutions studied by absorption spectroscopy

The paper presents a qualitative as well as quantitative spectroscopic study of methylene blue (MB) aggregation that occurs upon freezing the aqueous solutions over a wide concentration range. The Gaussian curve analysis and the multivariate curve resolution-alternating least squares method were used to determine the number and concentration of chemical species responsible for the overlaying absorption visible spectra measured. The results show the extent of aggregation for the concentrations above 10(-7) mol L(-1), being dependent on the freezing rate and the initial concentration. While the local concentration of MB at the grain boundaries of polycrystalline ice increased by approximately 3 orders of magnitude upon fast freezing at 77 K compared to the liquid phase, the concentration raised at least by 6 orders of magnitude upon slow freezing at 243 K. Since enhancement of the local concentration of solutes plays an important role in (photo)chemical transformations in solid aqueous media, this work helps to understand how the initial conditions control the course of the process. The results are relevant in other interdisciplinary fields, such as environmental chemistry, cosmochemistry, or geochemistry.     

Photoinduced coupling and adsorption of caffeic acid on silver surface studied by surface-enhanced Raman spectroscopy

The effect of light on the caffeic acid (CA) oxidative coupling is studied in aqueous solution and on silver by surface-enhanced Raman spectroscopy (SERS). CA can polymerize in aqueous solution or on a metal surface through an oxidative mechanism involving the formation of the corresponding quinone giving rise to characteristic Raman features in each case. We show here that the effect of light in relation to this oxidative coupling is crucial taking place mainly in the solution bulk. The products derived from such polymerization can then adsorb on the silver surface employed for SERS measurements, thus allowing its detection by Raman spectroscopy. The influence of irradiation time and the wavelength of the light employed for the photoinduced coupling was investigated.     

Preparation and characterization by surface-enhanced infrared absorption spectroscopy of silver nanoparticles formed on germanium substrates by electroless displacement

In this paper, the feasibility of applying electroless displacement to prepare silver nanoparticles (AgNPs) on the surface of germanium (Ge) substrate is demonstrated, and the performances of surfaces prepared in this manner for surface-enhanced infrared absorption (SEIRA) spectroscopy are reported. The process used to produce suitable AgNPs for SEIRA by electroless deposition is simple and effective, requiring only pretreatment of the germanium surface with hot air, immersion of the substrate in a dilute solution of silver nitrate, and washing of the resulting plate. To quantify the behavior of AgNPs on a Ge substrate and to optimize the conditions for the preparation of AgNPs on Ge substrates, a monolayer of p-nitrothiophenol (PNTP) was bonded to the surface of the AgNPs by immersion of the plate in a dilute solution of PNTP and measurement of the transmission spectrum. The factors that influenced the formation of AgNPs, and hence the SEIRA signals, included the concentration of AgNO₃, the reaction time and the temperature. Results indicated that stronger absorption bands in the SEIRA spectrum of a monolayer of PNTP were obtained if the reaction rate for the displacement of silver ions by Ge was slow. This condition was achieved by keeping the concentration of AgNO₃ and the reaction temperature low. Under the optimal conditions found in this work, an enhancement factor of approximately 100 was achieved for commonly used probe molecules in SEIRA measurements.     

Laser-induced potential jump at the electrochemical interface probed by picosecond time-resolved surface-enhanced infrared absorption spectroscopy

Picosecond time-resolved surface-enhanced infrared absorption spectroscopy (SEIRAS) has been used for the first time to examine the potential jump at the electrochemical interface induced by a visible pulse irradiation. The potential dependent shift of the C-O stretching vibration of CO adsorbed on a Pt electrode was utilized to monitor the potential jump. A 6-cm(-1) red-shift was observed with a time delay of approximately 200 ps with respect to a visible pump-pulse irradiation (532 nm, 35 ps duration, 3 mJ cm(-2)). The observed red-shift is ascribed to the heating of the in-plane frustrated translational mode of CO and the negative shift of potential. These two contributions can be separated with the aid of the transient of the background reflectivity of the electrode surface. The heating of water layers near the surface is mainly responsible for the potential jump through the orientation change of water molecules. This method is promising as a tool to examine ultrafast electrode dynamics.     

In situ monitoring of the DNA hybridization by attenuated total reflection surface-enhanced infrared absorption spectroscopy

In situ monitoring of DNA hybridization kinetics is achieved via an attenuated total reflection surface-enhanced infrared absorption spectroscopy (ATR-SEIRAS) technique using a sandwich assay structure. The synergistic enhancement effect gives this ATR-SEIRAS-based detection strategy promise to be a convenient and unique platform for bioanalysis.     

Adsorption of pyridine on a polycrystalline gold electrode surface studied by infrared reflection absorption spectroscopy

The adsorption behavior of pyridine on a smooth polycrystalline gold electrode surface was investigated over a wide wavenumber region (2000–500 cm⁻¹) by in situ infrared reflection absorption spectroscopy (IRAS). The reversible adsorption/desorption of pyridine was observed upon the change in applied electrode potential, and the adsorption state at positive potentials was found to depend strongly on the kind of halide ion used as a supporting electrolyte. Symmetry analysis of absorption bands observed revealed that pyridine molecules adsorb with the molecular axis (C₂ axis) perpendicular to the electrode surface (vertical configuration) at positive potentials in 0.5 M KF, KCl and KBr solutions. A band due to the out-of-plane bending mode of the adsorbed pyridine molecule was observed at potentials more negative than ca. 0 V for 0.5 M KF solution containing 100 mM pyridine. We concluded that even in the 100 mM pyridine solution, adsorbed pyridine forms a monolayer and that the molecules reorient from a flat (parallel) to the vertical configuration as the potential becomes less negative. No bands due to adsorbed pyridine were detected for 0.5 M KI solution. The amount of adsorbed pyridine was found to depend strongly on the strength of specific adsorption of halide ions.     

Photodissociation of thioglycolic acid studied by femtosecond time-resolved transient absorption spectroscopy

Steady-state and time-resolved spectroscopies were employed to study the photodissociation of both the neutral (HS-CH(2)-COOH) and doubly deprotonated ((-)S-CH(2)-COO(-)) forms of thioglycolic acid (TGA), a common surface-passivating ligand used in the aqueous synthesis and organization of semiconducting nanostructures. Room temperature UV-Vis absorption spectroscopy indicated strong absorption by the S(1) and S(2) excited states at 250 nm and 185 nm, respectively. The spectrum also contained a weaker absorption band that extended to approximately 550 nm, which was assigned to the π(CO) (*)←n(O) transition. Femtosecond time-resolved transient absorption spectroscopy was performed on TGA using 400 nm excitation and a white-light continuum probe to provide the temporally and spectrally resolved data. Both forms of TGA underwent a photoinduced dissociation from the excited state to form an α-thiol-substituted acyl radical (α-TAR, S-CH(2)-CO(●)). For the acidic form of TGA, radical formation occurred with an apparent time constant of 60 ± 5 fs; subsequent unimolecular decay took 400 ± 60 fs. Similar kinetics were observed for the deprotonated form of TGA (70 ± 10 fs radical formation; 420 ± 40 fs decay). The production of the α-TAR was corroborated by the observation of its characteristic optical absorption. Time-resolved data indicated that the photoinduced dissociation of TGA via cleavage of the C-OH bond occurred rapidly (≤100 fs). The prevalence of TGA in aqueous semiconducting nanoparticles makes its absorption in the visible spectral region and subsequent dissociation key to understanding the behavior of nanoscale systems.     

Reaction pathway change on plasmonic Au nanoparticles studied by surface-enhanced Raman spectroscopy

Gold nanoparticles (Au NPs) are nanoscale sources of light and electrons, which are highly relevant for their extensive applications in the field of photocatalysis. Although a number of research works have been carried out on chemical reactions accelerated by the energetic hot electrons/holes, the possibility of reaction pathway change on the plasmonic Au surfaces has not been reported so far. In this proof-of-concept study, we find that Au NPs change the reaction pathway in photooxidation of alkyne under visible light irradiation. This reaction produces benzil (COCO) without the presence of Au NPs. In contrast, as indicated by surface-enhanced Raman spectroscopic (SERS) results, the CC triple bonds (CC) adsorbed on Au NPs are converted into carboxyl (COOH) and acyl chloride (COCl) groups. The plasmonic Au NPs not only provide energetic charge carriers but also activate the reactant molecules as conventional heterogeneous catalysts. This study discloses the second role of plasmonic NPs in photocatalysis and bridges the gap between plasmon-driven and conventional heterogeneous catalysis.     

Adsorption kinetics of n-nonyl-beta-D-glucopyranoside at the air-water interface studied by infrared reflection absorption spectroscopy

The adsorption of the surfactant n-nonyl-beta-D-glucopyranoside at the air-water interface after injection of the surfactant into the subphase was studied by infrared reflection absorption spectroscopy. In the first part, we investigated the equilibrium adsorption of n-nonyl-beta-D-glucopyranoside and the Gibbs adsorption isotherm was measured by applying the film balance technique. In the second part, the adsorption kinetics was followed by changes in the surface pressure and in the intensities of the OH band, which is related to the layer thickness, and the CH(2) antisymmetric stretching vibrational band. During an induction period, when the molecules are still highly diluted and the surface pressure is low, they are oriented parallel to the air-water interface. IR band simulations for the CH(2) antisymmetric stretching vibrational band support the idea of horizontally oriented molecules at the air-water interface. Later on, when more molecules are adsorbed to the air-water interface, they suddenly rearrange to an upright orientation as indicated by changes of the OH and the CH(2) bands. The observations are discussed in comparison to results obtained for the adsorption kinetics of n-decyl-beta-D-maltopyranoside, n-dodecyl-beta-D-maltopyranoside, and sodium dodecyl sulfate.     

Electrochemically induced surface-enhanced infrared difference absorption (SEIDA) spectroscopy of a protein monolayer

Functional infrared difference spectra of a protein monolayer are recorded by exploiting the surface enhancement exerted by a modified gold surface. The noble metal is used as the working electrode to induce redox-linked structural changes in the single layer of cytochrome c. The observed differences in the relative band intensities as compared to the difference spectrum of cytochrome c in solution are attributed to orientational effects of the adsorbed protein.     

In situ monitoring of protein adsorption on a nanoparticulated gold film by attenuated total reflection surface-enhanced infrared absorption spectroscopy

In situ surface enhanced infrared absorption spectroscopy (SEIRAS) with an attenuated total reflection (ATR) configuration has been used to monitor the adsorption kinetics of bovine hemoglobin (BHb) on a Au nanoparticle (NP) film. The IR absorbance for BHb molecules on a gold nanoparticle film deposited on a Si hemispherical optical window is about 58 times higher than that on a bare Si optical window and the detection sensitivity has been improved by 3 orders of magnitude. From the IR signal as a function of adsorption time, the adsorption kinetics and thermodynamics can be explored in situ. It is found that both the electrostatic interaction and the coordination bonds between BHb residues and Au NP film surface affect the adsorption kinetics. The maximum adsorption can be obtained in solution pH 7.0 (close to the isoelectric point of the protein) due to the electrostatic interaction among proteins. In addition, the isotherm of BHb adsorption follows well the Freundlich adsorption model.     

Interaction of anhydride and carboxylic acid compounds with aluminum oxide surfaces studied using infrared reflection absorption spectroscopy

The chemical bonding of three different anhydride and carboxylic acid based compounds with a set of differently prepared aluminum substrates has been investigated using infrared reflection absorption spectroscopy. The compounds were selected to model typically used adhesives, coatings, and self-assembling monolayers. The purpose of the investigation was to study the interaction of these functional groups with the aluminum oxide surface and to determine whether this interaction is influenced by the changes in chemistry and composition of the oxide layer. The extent to which the compounds resisted disbondment in water was also investigated. The oxide layers on the differently prepared substrates were all found to be capable of hydrolysis of the anhydride group, resulting in the formation of two carboxylic acid groups. Subsequently, both of the carboxylic acid groups became deprotonated, to form a coordinatively bonded carboxylate species. The same behavior was also observed for monofunctional carboxylic acids. For all different oxides layers, the carboxylate was found to be coordinated in a bridging bidentate way to two aluminum cations in the oxide layer. The oxide layers showed however clear differences in the amount of molecules being chemisorbed. A relation was established with the amount of hydroxyls present on their surfaces, as determined from X-ray photoelectron spectroscopy measurements. The coordinative bonding of a monofunctional carboxylic acid group to the oxide surface was found to be not stable in the presence of water, while a bifunctional carboxylic acid group could resist displacement by water for a prolonged period of time.     

Intramolecular hydrogen atom tunneling in 2-chlorobenzoic acid studied by low-temperature matrix-isolation infrared spectroscopy

Intramolecular hydrogen atom tunneling in 2-chlorobenzoic acid has been investigated by low-temperature matrix-isolation infrared spectroscopy with the aid of density functional theory calculation. Infrared spectra of two relatively stable syn isomers, SC and ST, were observed in argon and xenon matrixes. When the matrix samples were annealed after deposition, the isomerization from ST to SC occurred around the benzene-carboxyl bond. Two less stable anti isomers, AT, which has an OH...Cl intramolecular hydrogen bond, and AC, which has no OH...Cl bond, were produced from SC and ST upon UV irradiation. When the matrix samples were kept in the dark after UV irradiation, AT and AC changed to ST and SC, respectively, by spontaneous isomerization around the C-O axis in the carboxyl group. The rate constants of isomerization, AT --> ST, in a Xe matrix were estimated from the absorbance changes at various matrix temperatures. The rate constants showed a drastic decrease in deuteration of the hydrogen atom of the carboxyl group. The relationship between the rate constants and the matrix temperature did not follow the Arrhenius law. These findings lead to the conclusion that the isomerization of AT --> ST and AC --> SC in low-temperature rare-gas matrixes proceeds through intramolecular hydrogen atom tunneling.