Conformation of oligo(ethylene glycol) grafted poly(norbornene) in solutions: A small angle neutron scattering study

The conformation of newly synthesized amphiphilic poly(methoxyoligo(ethylene oxide) norbornenyl esters) macro-homopolymers in dilute solutions of toluene-d8 and D₂O was investigated by small angle neutron scattering (SANS). The macro-homopolymers consist of a polynorbornene (PNB) backbone with a degree of polymerization (DP) of 50, and each repeat unit has a grafted ethylene glycol (EG) side chain with an average DP of 6.6. The hydrophobic backbone and hydrophilic side chains interact differently with solvents of different polarity, which makes the polymer conformation very sensitive to the solvent quality. It was found that in a 0.5 wt.% toluene solution the polymers assume coil-like conformation and gradually contract and become more compact with increasing polymer concentration. In D₂O, the conformation of the polymers were studied at different concentrations: 0.1, 0.5, 1.0 and 2.0 wt.% and at different temperatures: 25, 44, 60 and 74 °C. The polymers are partially contracted in D₂O and their shape can be described by the form factor of a rigid cylinder. The second virial coefficient A₂ was extracted at three temperatures (25, 44 and 60 °C) and the theta point was estimated to be reached at ∼45 °C. The attractive interactions between the polymers in D₂O increase with temperature, which leads to the polymer-solvent phase separation at the cloud point temperature (CPT). The polymer conformation remains virtually temperature independent below the CPT and at 74 °C polymers collapse and form compact structures with water soluble side chains in the shell.     

Electrosynthesis of poly(o-phenylenediamine) in a room temperature ionic liquid

Poly-o-phenylenediamine (PoPD) thin films were synthesized electrochemically on platinum electrodes in the room temperature ionic liquid (IL) N-butyl-N-methylpyrrolidinium (nonafluorobutanesulfonyl)-(trifluoromethanesulfonyl)imide (PYR₁₄IM₁₄). The polymer films were further characterized by electrochemical analysis and the results are compared with those obtained in conventional H₂SO₄ aqueous solution. The polymer films obtained in the IL-based electrolyte showed a good adherence on Pt and appeared attractive for the realization of biosensors since they showed a good selectivity with respect to the most common interferent compounds. PoPD films deposited from IL-based electrolytes were investigated in solutions containing compounds as ascorbate and acetaminophen, which are common interferents in electrochemical biosensor analysis, and proved satisfying for application in biosensors.     

A small-angle neutron scattering study of adsorbed poly(ethylene oxide) on Laponite

The adsorption of poly(ethylene oxide) (PEO) on synthetic anisotropic clay particles (Laponite) has been investigated as a function of the molecular weight. Contrast variation small-angle neutron scattering (SANS) measurements were used to characterize the distribution and adsorbed amount of polymer on the particles. These experiments show not only that polymer is present on the face of the clay particle but that it also extends or "wraps" over the edges. The edge layer was thicker than the face layer for all the molecular weights studied. The polymer layers are unusually thin, with a thickness and adsorbed amount that show little variation with molecular weight.     

A small-angle neutron scattering study of poly(ethylene oxide) microstructure in aqueous poly(styrenesulfonate sodium) solutions

Dilute aqueous solutions of d-PEO and PSSNa mixtures were studied by (2)H NMR spectroscopy and small-angle neutron scattering (SANS). The interactions between d-PEO and PSSNa were found to be negligible both in the presence and absence of NaCl. At very dilute concentration (0.7 mg mL(-1)), d-PEO chains were still found to be slightly collapsed at ambient temperature in water. Upon the addition of PSSNa, aggregates of d-PEO were observed with d-PEO coils loosely associated with each other. The average centre to centre distance between d-PEO coils, which was calculated from the maxima in SANS spectra, was similar to the size of the individual coils. The effect of a simple salt, NaCl, on d-PEO-PSSNa interaction was investigated. Salt addition induced a breakdown of the dilute d-PEO aggregates.     

Effects of temperature on neutron scattering from aqueous solutions of hydrophobically modified poly(ethylene oxide)

The effect of temperature on the structure of aqueous dispersions of hydrophobically end-capped poly(ethylene oxide) (PEOM) was investigated by small angle neutron scattering (SANS). Polymers with hydrogenated or deuterated n-octadecyl end-groups were studied in heavy water or in a mixture heavy water / water, respectively. In the latter case the PEO chains were selectively matched. In all the cases, the scattering curves were characterised by a main peak which revealed organisation of polymers into micelles consisting of hydrophobic cores surrounded by repulsive PEO coronae. Measurements were performed in the semi-dilute regime where micelles coronae overlap. At constant polymer concentration, an increase in temperature leads to decreasing solvent strength of water for the PEO chains and decreasing repulsion between the PEO coronae. As a result, the intensity of the peak in a mixture of water /heavy water decreases with temperature On the contrary, in heavy water, the peak of the scattered intensity increases with increasing temperature. This scattering behaviour is interpreted on the basis of a scaling theory of the semi-dilute solutions of star-like polymer micelles.     

A small angle neutron scattering study of the conformation of a side chain liquid crystal poly(methacrylate) in the smectic C phase

The conformation of the backbone in the side chain liquid crystal polymer poly\[ omega (4-methoxybiphenyl-4-yloxy)butyl methacrylate] has been studied in the smectic C and nematic phases. Small angle neutron scattering experiments were performed on mixtures of molecules with perdeuteriated backbones and unlabelled molecules. The polymer is found to adopt an oblate conformation in the smectic C phase. The components of the radius of gyration parallel and perpendicular to the director are determined as a function of temperature from Guinier plots of the SANS data. The radii of gyration do not vary across the smectic phase and are found to be Rg,||=(27+/-1)A, Rg, =(42+/-1)A. These results are compared with recent SANS results for other side chain liquid crystal polymers.     

Small-angle neutron scattering and theoretical investigation of poly(ethylene oxide)-poly(propylene oxide)-poly(ethylene oxide) stabilized oil-in-water microemulsions

The aim of this study is to determine the effects of oil solutes and alcohol cosolvents on the structure of oil-in-water microemulsions stabilized by poly(ethylene oxide)-poly(propylene oxide)-poly(ethylene oxide) (PEO-PPO-PEO) triblock copolymers. The systems investigated involved the solubilization of 1,3,5-trimethylbenzene or 1,2-dichlorobenzene by P123 (EO(20)-PO(70)-EO(20)) pluronic surfactant micelles in water and water + ethanol solvents. The structures of these swollen micelles were determined by small-angle neutron scattering (SANS). A thermodynamic model was employed to interpret the characterization data. The results of the thermodynamic model for micellization agreed well with the SANS data from samples of micelles swollen by both oils. The model predicted the size of the micelles within 5% accuracy using only one fitting parameter, the micelle polydispersity. Ethanol had significantly different effects on the polymer micelles that contained solubilized oil compared to pure polymer micelles. For pure polymer micelles, the addition of ethanol increased the solubility of the polymer and, therefore, decreased the total volume fraction of micelles, while for polymer-oil aggregates, ethanol tended to have a positive effect on the volume fraction of micelles. SANS results showed that the greatest divergence from pure aqueous solvent results occurred at oil concentrations above the microemulsion stability limit.     

Small angle x-ray scattering study of ultra-high molecular weight poly(ethylene oxide) gamma irradiated in bulk

The effect of gamma irradiation on the structure of ultra-high molecular weight poly(ethylene oxide) (UHMWPEO) has been investigated by small-angle x-ray scattering (SAXS). The pressed and irradiated polymer possesses quite strong diffuse scattering. That fact makes the direct determination of the main structural parameters very difficult. To solve the problem a modification of the standard evaluating methods is suggested. Thus, the separation of the porous scattering from that of structural formations of PEO becomes possible. The application of a collimation correction according to Schmidt's method enables to separate diffuse and discrete parts in the scattering. Dependences of the long period, the gyration radii, and the difference between densities of crystalline and amorphous phases on the irradiation dose show that the irradiation increases the density of amorphous areas. A packing of the lamellar aggregates and increase of the porous sizes are observed.     

Morphology of poly(ethylene oxide)/poly(vinyl acetate) blends

The morphology of poly(ethylene oxide)/poly(vinyl acetate) (PEO/PVAc) blends was examined using small angle X-ray scattering (SAXS) and optical microscopy. The morphological and structural parameters of the blends are dependent on both composition and crystallization conditions. Optical microscopy revealed that blend samples prepared by solution casting crystallized with volume-filling crystals up to a composition of 30/70 wt% PEO/PVAc; at higher PVAc content there was no evidence of crystallization in the temperature range studied. Pure PEO always crystallized with a spherulite-hedrite morphology. The formation of spherulites was relatively favoured at lower crystallization temperatures and by addition of PVAc to PEO. Small angle X-ray intensity profiles were analyzed using a recently developed methodology and it was found that, for a given crystallization temperature, the amorphous and interphase thicknesses increased with increasing PVAc content but that the average crystalline thickness was independent of composition. The morphological and structural properties of the PEO/PVAc blends were attributed to the presence of non-crystallizable material in both the interlamellar and interfibrillar regions.     

LCST-type liquid-liquid phase separation behaviour of poly(ethylene oxide) derivatives in an ionic liquid

We present a new series of polymer-ionic liquid solutions exhibiting LCST-type liquid-liquid phase separation behaviour, and reveal their phase behaviour and intermolecular interactions based on phase diagrams and NMR analysis.     

Internal pressure of solid poly(ethylene oxide) 6000 swollen with liquid poly(ethylene oxide) 200

Internal pressures (P_i) have been measured at low external pressure for solid poly(ethylene oxide) 6000 and solid poly(ethylene oxide) 6000 swollen with 5% by weight liquid poly(ethylene oxide) 200. Values of P_i are low (P_i < 10⁸ Pa at 10°). The effect of swelling with liquid, which is located exclusively within the disordered layers of the solid, is that expected on the basis of additivity.     

Small-angle neutron scattering study on microstructure of poly(N-isopropylacrylamide)-block-poly(ethylene glycol) in water

By employing small-angle neutron scattering (SANS), we investigated the microstructures of, poly(N-isopropylacrylamide) (PNIPA)-block-poly(ethylene glycol) (PEG) (NE) in deuterated water D₂O, as related to macroscopic behaviors of fluidity, turbidity and synerisis. SANS revealed following results: (i) microphase separation occurs at around above 17 °C in a temperature range of transparent sol below 30 °C. In the microdomain appeared in the transparent sol state, both block chains of PNIPA and PEG are swollen by water; (ii) for the NE solution of polymer concentration W_p > 3.5% (w/v), corresponding to opaque gel above 30 °C, a percolated structure, i.e., network-like domain is formed by NE as a result of macrophase separation due to dehydration of the PNIPA chains. As the temperature increases toward 40 °C, the network domain is squeezed along a direction parallel to the NE interface, which leads to increase of the interfacial thickness given by swollen PEG chains and to the macroscopic synerisis behavior.     

Static light scattering from poly(ethylene oxide) in methanol

Static light scattering measurements were performed on dilute solutions of monodisperse poly(ethylene oxide) (PEO) in methanol at 25°C. PEOs of five different molecular weights ranging from nominal M_w = 8.6 × 10⁴ to 9.13 × 10⁵ were used. Linear Zimm plots were obtained for all the PEO samples: no downturn was observed at small angles, indicating that no large aggregates of PEO molecules exist in the solution. From the plots, values of the weight-average molecular weight, M_w, the radius gyration, R_G, and the second virial coefficient, A₂, were successfully determined for respective PEOs. Observed relationship between R_G and M_w indicates that methanol is certainly a good solvent for the polymer. © 1996 John Wiley & Sons, Inc.     

Morphology of single-chain single crystals of poly(ethylene oxide)

Single-chain particles of poly(ethylene oxide) (PEO) were prepared by spreading a 10^-4 wt.-% solution of PEO in benzene on a hot water surface. After isothermal crystallization at 317,2 ± 0,1 K for 10 h, regular-shaped single-chain crystals were observed. A variety of typical morphologies were also found, and some of them are discussed on the basis of the habit of PEO crystals and various twin modes.     

Morphology and interpenetrated growth of spherulites in miscible poly(ethylene succinate)/poly(ethylene oxide) blends

Morphology development and growth process of spherulites in miscible poly(ethylene succinate)/poly(ethylene oxide) blends are studied by means of polarizing optical microscopy and atom force microscopy in this paper. Thin films with different film thicknesses were used to follow the growth processes of spherulites and dendrites. It is shown that, when one component spherulite grows, the other component in the melt is always excluded from the spherulite. The excluded component may reenter into the spherulite through diffusion depending on amorphous volume fraction of spherulite and segmental mobility of molecules, which leads to the occurrence of interpenetrated growth. This mechanism was analyzed in detail in this paper.     

Small angle X-ray scattering studies of poly(ethylene terephthalate) and poly(butylene terephthalate)

Summary Small angle X-ray studies and density measurements were carried out on isotropic PET and PBT samples. PET samples were crystallized between 60 and 260 °C, and PBT between 60 and 225 °C. The aim of these studies was to investigate the dependence of the amorphous density, the degree of crystallinity and the average transmission path through the regions of the two-phase system on the crystallization temperature. It could be shown that PET and PBT crystallize with sharp phase boundaries.Since for the evaluation of the amorphous density the knowledge the exact crystal density is very important, additional measurements of the wide angle X-ray behaviour were made. Both the crystal and the amorphous densities of PET and PBT show specific differences dependent on the crystallization temperature, which can be explained by the higher mobility of the PBT chain.The degrees of crystallization, evaluated with the individual values of crystal density and amorphous density determined on each sample, are principally higher than those calculated with the usually used values of crystal and amorphous density. Investigations of the background scattering have shown that both the specific amorphous and specific crystalline scattering background are constant.For PET and PBT the average transmission path through the amporhous regions firstly decreases with increasing crystallization temperature. This can be explained by new formation of crystallites. At higher crystallization temperatures increases. The average transmission path through the crystalline regions increases over the whole range of crystallization temperature.

---

Zusammenfassung An isotropen PET- und PBT-Proben, kristallisiert bei Temperaturen zwischen 60 und 260 °C bzw. 60 und 225 °C wurden Röntgenkleinwinkel- und Dichtemessungen durchgeführt, mit dem Ziel, die amorphe Dichte, die Volumenanteile und die mittleren Durchschußlängen durch die Phasen in Abhängigkeit von der Kristallisationstemperatur zu bestimmen.Da für die Bestimmung der amorphen Dichte die Kenntnis der genauen Kristalldichte sehr wichtig ist, wurden zusätzliche Röntgenweitwinkelmessungen durchgeführt.Es konnte gezeigt werden, daß sowohl PBT als auch PET mit scharfen Phasengrenzen kristallisiert.Die Kristalldichte und die amorphe Dichte von PET bzw. PBT zeigen in Abhängigkeit von der Kristallisations-temperatur spezifische Unterschiede, die durch die höhere Beweglichkeit der PBT-Kette erklärt werden können.Die Kristallisationsgrade, die mit den von uns bestimmten Kristalldichten und amorphen Dichten ermittelt wurden, liegen generell höher als die mit den bekannten Werten von _c und _a berechneten. Untersuchungen des Streuuntergrundes zeigten, daß sowohl der spezifische amorphe als auch der spezifische kristalline Streuuntergrund konstant ist.Bei PET und PBT nehmen die mittleren Durchschußlängen durch die amorphen Phasenanteile bei geringen Kristallisationstemperaturen ab, was durch die Neubildung von Kristalliten erklärt wird, und nehmen bei höheren Kristallisationstemperaturen wieder zu.Die mittleren Durchschußlängen durch die kristallinen Phasenanteile nehmen über den gesamten Temperaturbereich zu.

---

---

With 22 figures and 3 tables     

Imidazolium‐based poly(ionic liquid)s with poly(ethylene oxide) main chains: Effects of spacer and tail structures on ionic conductivity

Ten types of cationic glycidyl triazole polymers (GTPs) are prepared from combinations of five alkyl‐imidazolium units (methyl‐, ethyl‐, n‐propyl‐, iso‐propyl‐, and n‐butyl‐imidazoliums) and two spacers [di‐ and tri(ethylene glycol)s]. Since these poly(ionic liquid)s are prepared from the same sample of glycidyl azide polymer by postfunctionalization method, they have the same degree of polymerization. Therefore, the structure–property relationship can be discussed without influence of molecular weight difference. The samples are characterized by NMR, differential scanning calorimetry, and thermogravimetric analysis. The ionic conductivity data are obtained by impedance measurements. The GTPs with the tri(ethylene glycol) spacer and ethyl‐ and n‐butyl‐imidazolium units afford the highest anhydrous conductivity of 1.5 × 10^?5 S cm^?1 at 30 °C. Based on electrode polarization (EP) analysis, we calculate the conducting ion (carrier) concentration and mobility. We discuss the effect of the spacer and N‐alkyl tail structures on the ionic conductivity using the data obtained by EP analysis and X‐ray diffraction. © 2016 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2016 , 54, 2896–2906     

Lithium assisted electrochemical reduction of uranium oxide in room temperature ionic liquid

Lithium assisted electrochemical reduction of U₃O₈ in the room temperature ionic liquid (RTIL), N-methyl-N-propylpiperidinium bis(trifluoromethylsulfonyl)imide (MPPiNTf₂), was studied to explore the feasibility of using RTILs for direct electrochemical reduction of uranium oxide at near ambient temperature. The electrochemical behavior of Li⁺ in MPPiNTf₂ at stainless steel electrode was investigated by cyclic voltammetry and chronoamperometry. The cyclic voltammogram of LiNTf₂ in MPPiNTf₂ at 373 K consisted of a surge in cathodic current occurring at a potential of −2.8 V (vs. Fc/Fc⁺) due to the reduction of Li(I) to metallic form. The nucleation phenomenon observed in the voltammogram was investigated by chronoamperometry. Electrodeposition of metallic lithium on U₃O₈ particles contained in a stainless steel (SS) basket was carried out to examine the feasibility of reducing U₃O₈ to metallic form. The results are discussed in this paper.     

Water distributions in polystyrene-block-poly[styrene-g-poly(ethylene oxide)] block grafted copolymer system in aqueous solutions revealed by contrast variation small angle neutron scattering study

We develop an experimental approach to analyze the water distribution around a core-shell micelle formed by polystyrene-block-poly[styrene-g-poly(ethylene oxide (PEO)] block copolymers in aqueous media at a fixed polymeric concentration of 10 mg/ml through contrast variation small angle neutron scattering (SANS) study. Through varying the D(2)O/H(2)O ratio, the scattering contributions from the water molecules and the micellar constituent components can be determined. Based on the commonly used core-shell model, a theoretical coherent scattering cross section incorporating the effect of water penetration is developed and used to analyze the SANS I(Q). We have successfully quantified the intramicellar water distribution and found that the overall micellar hydration level increases with the increase in the molecular weight of hydrophilic PEO side chains. Our work presents a practical experimental means for evaluating the intramacromolecular solvent distributions of general soft matter systems.     

Hydrogen motions in the alpha-relaxation regime of poly(vinyl ethylene): a molecular dynamics simulation and neutron scattering study

The hydrogen motion in poly(vinyl ethylene) (1,2-polybutadiene) in the alpha-relaxation regime has been studied by combining neutron spin echo (NSE) measurements on a fully protonated sample and fully atomistic molecular dynamics simulations. The almost perfect agreement between experiment and simulation results validates the simulated cell. A crossover from Gaussian to non-Gaussian behavior is observed for the intermediate scattering function obtained from both NSE measurements and simulations. This crossover takes place at unusually low Q values, well below the first maximum of the static structure factor. Such anomalous deviation from Gaussian behavior can be explained by the intrinsic dynamic heterogeneity arising from the differences in the dynamics of the different protons in this system. Side group hydrogens show a markedly higher mobility than main chain protons. Taking advantage of the simulations we have investigated the dynamic features of all different types of hydrogens in the sample. Considering each kind of proton in an isolated way, deviations from Gaussian behavior are also found. These can be rationalized in the framework of a simple picture based on the existence of a distribution of discrete jumps underlying the atomic motions in the alpha process.