Picosecond time-resolved fluorescence study on solute-solvent interaction of 2-aminoquinoline in room-temperature ionic liquids: aromaticity of imidazolium-based ionic liquids

Time-resolved fluorescence spectra and fluorescence anisotropy decay of 2-aminoquinoline (2AQ) have been measured in eight room-temperature ionic liquids, including five imidazolium-based aromatic ionic liquids and three nonaromatic ionic liquids. The same experiments have also been carried out in several ordinary molecular liquids for comparison. The observed time-resolved fluorescence spectra indicate the formation of pi-pi aromatic complexes of 2AQ in some of the aromatic ionic liquids but not in the nonaromatic ionic liquids. The fluorescence anisotropy decay data show unusually slow rotational diffusion of 2AQ in the aromatic ionic liquids, suggesting the formation of solute-solvent complexes. The probe 2AQ molecule is likely to be incorporated in the possible local structure of ionic liquids, and hence the anisotropy decays only through the rotation of the whole local structure, making the apparent rotational diffusion of 2AQ slow. The rotational diffusion time decreases rapidly by adding a small amount of acetonitrile to the solution. This observation is interpreted in terms of the local structure formation in the aromatic ionic liquids and its destruction by acetonitrile. No unusual behavior upon addition of acetonitrile has been found for the nonaromatic ionic liquids. It is argued that the aromaticity of the imidazolium cation plays a key role in the local structure formation in imidazolium-based ionic liquids.     

Revisiting ether-derivatized imidazolium-based ionic liquids

A series of ether-derivatized imidazolium halides have been prepared and characterized. Contrary to literature reports, they are all crystalline solids and have melting points well above room temperature (50-100 degrees C). Single crystals of the imidazolium salts, obtained in situ by slow cooling from their molten state to room temperature, were analyzed by X-ray crystallography, revealing various anion-cation interactions in the solid state. Exchange of the halides with [Tf(2)N]- yielded room temperature ionic liquids with viscosities that are comparable to related 1-alkyl-3-methylimidazolium ionic liquids. Density functional theory combined with IR spectroscopy has been used to analyze the role of functionalization of the imidazolium side chain on the formation of the molecular and supramolecular structure of the compounds and its possible impact on their physical properties.     

A comparison of ether- and alkyl-derivatized imidazolium-based room-temperature ionic liquids: a molecular dynamics simulation study

Molecular dynamics simulations of ether-derivatized imidazolium-based room-temperature ionic liquids (EDI-RTILs), [C(5)O(2)mim][TFSI] and [C(5)O(2)mim][BF(4)], have been performed and compared with simulations of alkyl-derivatized analogues (ADI-RTILs). Simulations yield RTIL densities, self-diffusion coefficients and viscosity in excellent agreement with experimental data. Simulations reveal that structure in the EDI-RTILs, quantified by the extent of nanoscale segregation of tails as well as cation-ion and cation-cation correlations, is reduced compared to that observed in the ADI-RTILs. Significant correlation between ether tail oxygen atoms and imidazolium ring hydrogen atoms was observed in the EDI-RTILs. This correlation is primarily intramolecular in origin but has a significant intermolecular component. Competition of ether oxygen atoms with oxygen atoms of TFSI(-) or fluorine atoms of BF(4)(-) for coordination of the ring hydrogen atoms was found to reduce the extent of cation-anion correlation in the EDI-RTILs compared to the ADI-RTILs. The reduction in intermolecular correlation, particularly tail-tail segregation, as well as weakening of cation-anion specific interactions due to the ether tail, may account for the faster dynamics observed in the EDI-RTILs compared to ADI-RTILs.     

Surface characterization of functionalized imidazolium-based ionic liquids

The surface composition of oligo(ethylene glycol) ether functionalized bis(trifluoromethylsulfonyl)imide ionic liquids has been studied by means of X-ray photoelectron spectroscopy (XPS). For [Me(EG)MIM][Tf 2N], [Et(EG) 2MIM][Tf 2N], and [Me(EG) 3MIM][Tf 2N], which vary by the number of ethylene glycol (EG) units (from 1 to 3), we have shown that the stoichiometry of the surface near region is in excellent agreement with the bulk stoichiometry, which confirms the high purity of the ionic liquid samples investigated and rules out pronounced surface orientation effects. This has been deduced from the experimental observation that the angle-resolved XP spectra of all elements present in the IL anions and cations (C, N, O, F, S) show identical signals in the bulk and surfaces sensitive geometry, i.e., at 0 degrees and 70 degrees emission angle, respectively. The relative intensity ratios of all elements were found to be in nearly perfect agreement with the nominal values for the individual ILs. In contrast to these findings, we identified surface-active impurities in [Me(EG)MIM]I, which is the starting material for the final anion exchange step to synthesize [Me(EG)MIM][Tf 2N]. Sputtering of the surface led to a depletion of this layer, which however recovered with time. The buildup of this contamination is attributed to a surface enrichment of a minor bulk contamination that shows surface activity in the iodide melt.     

Bimolecular photoinduced electron transfer in imidazolium-based room-temperature ionic liquids is not faster than in conventional solvents

The fluorescence quenching of 3-cyanoperylene upon electron transfer from N,N-dimethylaniline in three room-temperature ionic liquids (RTILs) and in binary solvent mixtures of identical viscosity has been investigated using steady-state and time-resolved fluorescence spectroscopy. This study was stimulated by previous reports of bimolecular electron transfer reactions faster by one or several orders of magnitude in RTILs than in conventional polar solvents. These conclusions were usually based on a comparison with data obtained in low-viscous organic solvents and extrapolated to higher viscosities and not by performing experiments at similar viscosities as those of the RTILs, which we show to be essential. Our results reveal that (i) the diffusive motion of solutes in both types of solvents is comparable, (ii) the intrinsic electron transfer step is controlled by the solvent dynamics in both cases, being slower in the RTILs than in the conventional organic solvent of similar viscosity, and (iii) the previously reported reaction rates much larger than the diffusion limit at low quencher concentration in RTILs originate from a neglect of the static and transient stages of the quenching, which are dominant in solvents as viscous as RTILs.     

Surface chemistry of room-temperature ionic liquids

In many applications of room-temperature ionic liquids, it has been recognized that the interface is a vital component. In electrochemistry, for instance, the electron transfer is significant to the efficiency of the solar cell and is very much dependent on the behavior of a given interface. This review presents the current state of knowledge of room-temperature ionic liquids in contact with solids, liquids, and gas phases. Experimental and molecular modeling studies have been conducted to investigate the surface structure and composition of ions in pure ionic liquids. However, surface studies on these liquids are still in its infancy and as the range of the available surface techniques and systematic investigations are increased, our understanding will improve which will lead to advances on this field.     

Self-assembled structure in room-temperature ionic liquids

Self-assembled vesicles, structurally equivalent to some hydrotropes, have been obtained from a Zn2+-fluorous surfactant or in the mixture of Zn2+-fluorous surfactant/zwitterionic surfactant in room-temperature ionic liquids (RTILs). The existence of bilayers arranged in vesicles in RTILs would be very exciting, open several new possibilities as reaction media, and increase our understanding of the physical and chemical factors for self-assembling systems in RTILs.     

Bicyclic imidazolium-based ionic liquids: synthesis and characterization

We previously reported the use of imidazole as starting compound for preparing a bicyclic imidazolium ionic liquid, [b-3C-im][NTf₂], with an overall 29% isolated yield in four synthetic steps. This new room temperature ionic liquid was shown to be far more chemically stable than commonly used [bmim][PF₆], [bdmim][PF₆], and [bdmim][NTf₂]. Because of this intriguing chemical stability, it prompted us to develop a more generalized and high yielding synthesis so that molecular diversity of bicyclic ionic liquids may be explored. In this work, we amended the previous synthetic route by employing 4-chlorobutyronitrile or 5-chlorovaleronitrile as starting materials and successfully developed a five-step synthesis of a series of novel bicyclic imidazolium-based ionic liquids in 40-53% overall isolated yields. We investigated intrinsic reactivity of all bicyclic ionic liquids prepared and found that, under strongly basic conditions, among all tested ionic liquids the 5,5-membered [R-3C-im][NTf₂] ionic liquids were most stable to solvent deuterium isotope exchange while the previously reported [bdmim][NTf₂] ionic liquid was 50% deuterium exchanged at its C-2 methyl in 30 min at ambient temperature. Under identical condition, the commonly used [bmim][NTf₂] ionic liquid was deuterium exchanged instantaneously at its C-2 hydrogen. In the absence of bases, only [bmim][PF₆] was deuterium exchanged (50% within 1 h) and all other ionic liquids gave no detectable exchanges even after 25 days at ambient temperature. Moreover, both [bmim][NTf₂] and [bdmim][NTf₂] ionic liquids were readily methylated at C-2 position with methyl iodide under basic condition at room temperature. Under the same condition, [R-3C-im][NTf₂] and [R-4C-im][NTf₂] ionic liquids were completely stable and chemically inert. We envisioned that [R-3C-im][NTf₂] should be well suited as solvents for organic synthesis.     

The dielectric response of room-temperature ionic liquids: effect of cation variation

In continuation of recent work on the dielectric response of imidazolium-based ionic liquids (ILs) (J. Phys. Chem. B, 2006, 110, 12682), we report on the effect of cation variation on the frequency-dependent dielectric permittivity up to 20 GHz of ionic liquids. The salts are comprised of pyrrolidinium, pyridinium, tetraalkylammonium, and triethylsulfonium cations combined with the bis-((trifluoromethyl)sulfonyl)imide anion. The dielectric spectra resemble those observed for imidazolium salts with the same anion. In all cases, the major contribution results from a diffusive low-frequency response on the time scale of several 100 ps, which shows a broadly distributed kinetics similar to that of spatially heterogeneous states in supercooled and glassy systems rather than that observed in fluid systems. There is evidence for a weak secondary process near 10-20 ps. Perhaps the most interesting difference to imidazolium salts is founded in the missing portions of the spectra due to processes beyond the upper cutoff frequency of 20 GHz. These are lower than that observed for imidazolium-based salts and seem to vanish for tetraalkylammonium and triethylsulfonium salts. As for imidazolium salts, the extrapolated static dielectric constants are on the order of epsilon(S) congruent with 10-13, classifying these ILs as solvents of moderate polarity.     

Sonochemistry and sonoluminescence of room-temperature ionic liquids

The sonication of ionic organic liquids leads to decomposition of the liquids. Multibubble sonoluminescence spectra and headgas analysis reveal a variety of decomposition products from the sonolysis of N,N'-dialkylimidazolium ionic liquids. The decomposition is a result of acoustic cavitation, which generates localized hot spots from the implosive collapse of bubbles in the ionic liquids. Despite the negligible vapor pressure of the ionic liquids, reaction still occurs in a heated shell of the bubbles or from microdroplets thrown into the collapsing bubbles.     

Dry excess electrons in room-temperature ionic liquids

In this article, we describe general trends to be expected at short times when an excess electron is generated or injected in different room-temperature ionic liquids (RTILs). Perhaps surprisingly, the excess electron does not localize systematically on the positively charged cations. Rather, the excess charge localization pattern is determined by the cation and anion HOMO/LUMO gaps and, more importantly, by their relative LUMO alignments. As revealed by experiments, the short-time (ps/ns) transient UV spectrum of excess electrons in RTILs is often characterized by two bands, a broad band at low energies (above 1000 nm) and another weaker band at higher energies (around 400 nm). Our calculations show that the dry or presolvated electron spectrum (fs) also has two similar features. The broad band at low energies is due to transitions between electronic states with similar character on ions of the same class but in different locations of the liquid. The lower-intensity band at higher energies is due to transitions in which the electron is promoted to electronic states of different character, in some cases on counterions. Depending on the chemical nature of the RTIL, and especially on the anions, excess electrons can localize on cations or anions. Our findings hint at possible design strategies for controlling electron localization, where electron transfer or transport across species can be facilitated or blocked depending on the alignment of the electronic levels of the individual species.     

Electrogenerated radical anions in room-temperature ionic liquids

The sequential two-electron reduction of benzaldehyde to the radical anion and dianion species in 1-butyl-3-methylimidazolium triflimide and 1-butyl-1-methylpyrrolidinium triflimide is reported. In 1-butyl-1-methylpyrrolidinium triflimide, the heterogeneous electrochemistry and follow-up chemical reactivity are essentially equivalent to that in conventional molecular-solvent-based electrolytes where no interaction with the media is observed. In 1-butyl-3-methylimmidazolium triflimide, reduction occurs via the same two heterogeneous processes; however, the apparent heterogeneous rate constants are smaller by ca. 1 order of magnitude which leads to quasi-reversible electrochemical behavior. Since the bulk viscosities of the liquids are similar, the slower heterogeneous kinetics are attributed to local interfacial viscosity due to local ordering in the imidazolium-based medium. Also, a dramatic anodic shift in the reduction potentials is observed in 1-butyl-3-methylimidazolium triflimide media that is attributed to a stabilizing interaction of the radical anion and dianion species with the imidazolium cation.     

Direct electrochemical reduction of hemin in imidazolium-based ionic liquids

The direct electrochemical reduction of hemin, protoporphyrin(IX) iron(III) chloride, ligated with strong or weak heterocyclic bases, was investigated in the ionic liquids (IL), 1-butyl-3-methylimidazolium hexafluorophosphate ([bmim][PF₆]) and 1-octyl-3-methylimidazolium hexafluorophosphate ([omim][PF₆]), using cyclic voltammetry and chronocoulometry. Hemin complexed with N-methylimidazole (NMI) or with pyridine had E_1/2 values slightly (4–59 mV) more positive in IL (without electrolyte) than in methanol (1.0 M electrolyte) using a gold electrode. NMI-ligated hemin had a lower E_1/2 than pyridine-ligated hemin in either IL, consistent with the stronger electron donor characteristic of NMI. [Bmim][PF₆] solutions consistently yielded E_1/2 values 30 mV more negative than [omim][PF₆] solutions. The diffusion coefficients D_o of hemin in the IL ranged between 1.50 and 2.80×10⁻⁷ cm² s⁻¹, while the heterogeneous electron-transfer rate constants k_s ranged between 3.7 and 14.3×10⁻³ cm s⁻¹. Cyclic voltammetry of hemin adsorbed to a gold surface through 4,4′-bispyridyl disulfide (AT4) linkages showed a large positive shift in the oxidation wave, indicating that adsorption stabilizes the reduced hemin state. The surface concentration Γ_o of the adsorbed hemin was determined to be 1.21×10⁻¹⁰ mol cm⁻², indicating the presence of one or more complete monolayers of hemin. These findings suggest that while hemin is electrochemically active in IL, its behavior is modified by the ligand field strength and surface adsorption phenomena.     

Molecular dynamics simulation of dual amino-functionalized imidazolium-based ionic liquids

In this work, the all-atom (AA) force fields were set up for three kinds of dual amino-functionalized imidazolium-based ionic liquids (ILs), composed by cations with different alkyl chain length and amino acid anion [Gly]⁻. The force field was based on our previous work and the default parameters were developed in this study. Molecular dynamics simulations were performed. Validation was carried out by comparing simulation densities with experimental data, and good agreement was obtained. Molar volume and heat capacity at constant pressure were predicted. Mean square displacements for these ILs were computed and these ILs were proved to move very slowly. It may be caused by hydrogen-bonded network between ions and the terminal azyl. To depict the microscopic structures of the ILs, many types of radial distribution functions were investigated. It is interesting to find that not only the cation and anion, but also the anions themselves will form hydrogen bonds.     

Behavior of electrogenerated bases in room-temperature ionic liquids

The reductive electrochemistry of substituted benzophenones in the aprotic room-temperature ionic liquid (RTIL) 1-butyl-1-methylpyrrolidinium bistriflimide occurs via two consecutive one-electron processes leading to the radical anion and dianion, respectively. The radical anion exhibited electrochemical reversibility at all time-scales whereas the dianion exhibited reversibility at potential sweep rates of >or=10 V s(-1), collectively indicating the absence of strong ion-paring with the RTIL cation. In contrast, reduction in 1-butyl-3-methylimidazolium bistriflimide is complicated by proton-transfer from the [Bmim] cation. At low potential sweep rates, reduction involves a single two-electron process characteristic of either an electrochemical, chemical, electrochemical (ECE) or disproportion-type (DISP1) mechanism. The rate of radical anion protonation in [Bmim] is governed by basicity and conforms to the Hammett free-energy relation. At higher potential sweep rates in [Bmim][NTf2], reduction occurs via two consecutive one-electron processes, giving rise to the partially reversible generation of the radical anion and the irreversible generation of the dianion, respectively. Also, the redox potentials for the reversible parent/radical anion couples were found to be a linear function of Hammett substituent constants in both RTIL media and exhibited effectively equivalent solvent-dependent reaction constants, which are similar to those for reduction in polar molecular solvents such as acetonitrile or alcohols.     

A novel united-atom force field for imidazolium-based ionic liquids

A novel united-atom (UA) force field is proposed from our previously developed all-atom (AA) force field for the imidazolium-based ionic liquids by the introduction of a coarse-grained method. The Lennard-Jones parameters for CH(2) and CH(3) in alkyls are fitted to match the AA force field, and the partial atomic charges are re-fitted by the one conformation two-step RESP method. The force field is verified by molecular dynamics simulations of pure ionic liquids and the mixture of [bmim][BF(4)] and acetonitrile. The densities, self-diffusion coefficients, vaporization enthalpies, cohesive energy densities, and microscopic structures of both the pure components and mixtures are simulated. The simulated results from the UA force field agree well with those from the AA force field. In addition, the predictive capability of the UA force field for the liquid densities of [C(n)mim][PF(6)] is tested. The UA force field proposed in this work provides a useful tool with good accuracy and much less computational intensity for future molecular design of ionic liquids.     

Shape-controlled synthesis of silver crystals mediated by imidazolium-based ionic liquids

This work presents an approach toward the shape-controlled synthesis of Ag crystals with hierarchical structures by exploitation of ionic liquids (ILs) as a shape-regulating agent. The synthesis of Ag crystals involves the reduction of AgNO(3) by EG in the presence of ILs, specifically 1-butyl-3-methylimidazolium methylsulfate (bmim-MeSO(4)). In accordance with non-classical crystallization growth mechanism, the primary Ag nanoparticles were formed at the early stage of the reaction, and then self-organized into 1D or 3D Ag superstructures via an IL-mediated self-assembly process. Their final morphologies were strongly dependent on the reaction conditions such as the concentration of ILs in the reaction mixture and the reaction temperature, which suggests that ILs play an important role in controlling the shape of the Ag crystals.     

Ultrafast solvation dynamics of coumarin 153 in imidazolium-based ionic liquids

The dynamic Stokes shift of coumarin 153 has been measured in two room-temperature ionic liquids, 1-(3-cyanopropyl)-3-methylimidazolium bis(trifluoromethylsulfonyl)imide and 1-propyl-3-methylimidazolium tetrafluoroborate, using the fluorescence up-conversion technique with a 230 fs instrumental response function. A component of about 10-15% of the total solvation shift is found to take place on an ultrafast time scale < 10 ps. The amplitude of this component is substantially less than assumed previously by other authors. The origin of the difference in findings could be partly due to chromophore-internal conformational changes on the ultrafast time scale, superimposed to solvation-relaxation, or due to conformational changes of the chromophore ground state in polar and apolar environments. First three-pulse photon-echo peak-shift experiments on indocyanine green in room-temperature ionic liquids and in ethanol indicate a difference in the inertial component of the early solvent relaxation of <100 fs.     

Thermochemistry of imidazolium-based ionic liquids: experiment and first-principles calculations

In this work the molar enthalpy of formation of the ionic liquid 1-ethyl-3-methylimidazolium dicyanoamide in the gaseous phase [C(2)MIM][N(CN)(2)] was measured by means of combustion calorimetry and enthalpy of vaporization using transpiration. Available, but scarce, primary experimental results on enthalpies of formation of imidazolium based ionic liquids with the cation [C(n)MIM] (where n = 2 and 4) and anions [N(CN)(2)], [NO(3)] and [NTf(2)] were collected and checked for consistency using a group additivity procedure. First-principles calculations of the enthalpies of formation in the gaseous phase for the ionic liquids with the common cation [C(n)MIM] (where n = 2 and 4) and with the anions [N(CN)(2)], [NO(3)], [NTf(2)], [Cl], [BF(4)] and [PF(6)] have been performed using the G3MP2 theory. It has been established that the gaseous phase enthalpies of formation of these ionic liquids obey the group additivity rules.