Development of a capillary electrophoresis method for the enantioselective estimation of primaquine in pharmaceutical formulations

A capillary electrophoresis (CE) method has been developed that allows the separation and estimation of primaquine enantiomers using hydroxypropyl-gamma-cyclodextrin (HP-gamma -CD) as a chiral selector. The influence of chemical and instrumental parameters on the separation, such as type and concentration of CD, buffer concentration, buffer pH, applied voltage, capillary temperature, and injection time, were investigated. Good separation of the racemic mixture of primaquine was achieved using a fused-silica capillary (52.5 cm effective length x 50 microm id) and a background electrolyte composed of tris-phosphate buffer solution (50 mM, pH 2.5) containing 15 mM HP-gamma-CD as a chiral selector. The recommended applied voltage, capillary temperature, and injection time were 15 kV, 25 degrees C, and 6 s, respectively. Within-day and interday reproducibility of peak area and migration time gave relative standard deviation values ranging from 1.05-3.30%. Good recoveries (range of 96.8-104.9%) were obtained from the determination of placebos that were spiked with 0.25-1.00 mg/L primaquine. The proposed CE method was successfully applied to the assay of primaquine diphosphate in pharmaceutical formulations (tablets).     

Enantiomeric separation of citalopram and its metabolites by capillary electrophoresis

A simple and fast capillary electrophoretic method has been developed for the enantioselective separation of citalopram and its main metabolites, namely N-desmethylcitalopram and N,N-didesmethylcitalopram, using beta-cyclodextrin (beta-CD) sulfate as the chiral selector. For method optimisation several parameters were investigated, such as CD and buffer concentration, buffer pH, and capillary temperature. Baseline enantioseparation of the racemic compounds was achieved in less than 6 min using a fused-silica capillary, filled with a background electrolyte consisting of a 35 mM phosphate buffer at pH 2.5 supplemented with 1% w/v beta-CD sulfate and 0.05% w/v beta-CD at 25 degrees C and applying a voltage of -20 kV. A fast separation method for citalopram was also optimized and applied to the analysis of pharmaceutical formulations. Racemic citalopram was resolved in its enantiomers in less than 1.5 min using short-end injection (8.5 cm, effective length) running the experiments in a background electrolyte composed of a 25 mM citrate buffer at pH 5.5 and 0.04% w/v beta-CD sulfate at a temperature of 10 degrees C.     

Evaluation of the interaction between sitagliptin and cyclodextrin derivatives by capillary electrophoresis and nuclear magnetic resonance spectroscopy

An aqueous capillary electrophoretic method was developed for chiral analysis of the novel anti-diabetic drug, sitagliptin. The acid-base profiling of the analyte was carried out using both capillary electrophoresis and nuclear magnetic resonance pH titrations. The apparent complex stability and chiral separation properties were investigated with 30 different cyclodextrins under acidic conditions. The effect of concentration and pH of the BGE, temperature of the capillary, and the type and concentration of the chiral selector on the enantiomer resolution were thoroughly investigated. The effects of dual cyclodextrin systems on separation were also extensively studied. Complete separation of racemic sitagliptin with good resolution (R(S)=2.24) was achieved within a short time (15 min) with optimized parameters (10°C, pH=4.4, 40 mM phosphate buffer) of a sulfobutylether-β-cyclodextrin (averaged degree of substitution ~4) and native β-cyclodextrin dual system. The averaged stoichiometry of the inclusion complex was determined using the Job plot method with both (1)H and (19)F NMR experiments and resulted in a 1:1 complex. The structure of the inclusion complex was elucidated using 2-D ROESY NMR experiments.     

2-O-(2-hydroxybutyl)-beta-cyclodextrin as a chiral selector for the capillary electrophoretic separation of chiral drugs.

A new beta-cyclodextrin (beta-CD) derivative, 2-O-(2-hydroxybutyl)-beta-CD (HB-beta-CD), was successfully synthesized and used as chiral selector in capillary zone electrophoresis. Six chiral drugs, such as anisodamine, ketoconazole, propranolol, promethazine, adrenaline and chlorphenamine enantiomers, belonging to different classes of compounds of pharmaceutical interest were resolved. The chiral resolution (R(S)) was strongly influenced by the concentrations of the cyclodextrin derivative, the background electrolyte, and the pH of the background electrolyte. Under the conditions of 50 mmol/L tris-phosphate buffer at pH 2.5 containing 5 mmol/L 2-O-(2-hydroxybutyl)-beta-CD, the baseline separation of enantiomers, such as anisodamine (R(S) = 3.10), ketoconazole (R(S) = 3.01), propranolol (R(S) = 3.87), promethazine (R(S) = 3.63), adrenaline (R(S) = 3.42) and chlorphenamine (R(S) = 2.96), could be achieved.     

Enantioseparation of amino acid derivatives by capillary zone electrophoresis using vancomycin as chiral selector

The separation of racemic derivatized amino acids (N-acetyl) into their enantiomers was achieved using capillary zone electrophoresis employing vancomycin as a chiral selector. Due to the strong absorption properties of the chiral selector at the low wavelengths used, the partial-filling countercurrent method was adopted in order to improve method sensitivity. In the separation system studied, the chiral selector filled only a part of the capillary and, due to the appropriate selection of the pH, was moving in the opposite direction of the analytes keeping the detector free from absorbing compounds. The effect of several experimental parameters on the enantioresolution of analytes was studied, e.g., vancomycin concentration (0-5 mM), pH of the background electrolyte (pH 4-7), capillary temperature (15-35 degrees C), and the presence of an organic modifier in the run buffer (methanol or ethanol or n-propanol). N-Acetyl glutamic acid, serine, cystine, tyrosine, and proline were all baseline-resolved into their enantiomers and the enantioresolution factor (R(s)) was increased by raising the vancomycin concentration. pH 4 allowed the baseline resolution of the five studied analytes in the presence of 2.5 mM of chiral selector and an increase in pH caused a decrease of R(s).     

Capillary electrophoretic enantioseparation of basic drugs using a new single‐isomer cyclodextrin derivative and theoretical study of the chiral recognition mechanism

A novel single‐isomer cyclodextrin derivative, heptakis {2,6‐di‐O‐[3‐(1,3‐dicarboxyl propylamino)‐2‐hydroxypropyl]}‐β‐cyclodextrin (glutamic acid‐β‐cyclodextrin) was synthesized and used as a chiral selector in capillary electrophoresis for the enantioseparation of 12 basic drugs, including terbutaline, clorprenaline, tulobuterol, clenbuterol, procaterol, carvedilol, econazole, miconazole, homatropine methyl bromide, brompheniramine, chlorpheniramine and pheniramine. The primary factors affecting separation efficiency, which include the background electrolyte pH, the concentration of glutamic acid‐β‐cyclodextrin and phosphate buffer concentration, were investigated. Satisfactory enantioseparations were obtained using an uncoated fused‐silica capillary of 50 cm (effective length 40 cm) × 50 μm id with 120 mM phosphate buffer (pH 2.5–4.0) containing 0.5–4.5 mM glutamic acid‐β‐cyclodextrin as background electrolyte. A voltage of 20 kV was applied and the capillary temperature was kept at 20°C. The results proved that glutamic acid‐β‐cyclodextrin was an effective chiral selector for studied 12 basic drugs. Moreover, the possible chiral recognition mechanism of brompheniramine, chlorpheniramine and pheniramine on glutamic acid‐β‐cyclodextrin was investigated using the semi‐empirical Parametric Method 3.     

Enantioselective analysis of ofloxacin enantiomers by partial-filling capillary electrophoresis with bacteria as chiral selectors

The enantiomeric separation of ofloxacin enantiomers (OFLX) was achieved by using capillary electrophoresis partial-filled with Escherichia coli, Pseudomonas aeruginosa (Gram-negative), and Staphylococcus aureus (Gram-positive) as chiral selectors. Experimental parameters, including the concentration of background electrolyte, applied voltage, length of the filled bacteria plug, and pH of the buffer, were intensively investigated. Baseline separation of OFLX could be achieved within 7 min by using E. coli and P. aeruginosa as chiral selectors under the following conditions: electrophoretic buffer composed of 10 mM phosphate buffer at pH 7.4, applied voltage at 15 kV, and the bacteria (6.0 × 10(8) cells/mL) were injected into the capillary by gravity with injection height of 17.5 cm for 180 s (E. coli), 300 s (P. aeruginosa), and 300 s (S. aureus), respectively. E. coli and P. aeruginosa had better chiral selectivity for OFLX than S. aureus, which was in good agreement with OFLX having better antimicrobial activity on Gram-negative rather than Gram-positive bacteria. A novel method was developed for the enantioselective separation of enantiomers using bacteria as chiral selectors, which provides a new approach for antimicrobials enantioselective analysis, chiral pharmacodynamics, and chiral pharmacokinetics studies.     

Chiral separation of highly negatively charged enantiomers by capillary electrophoresis

The separation of two highly negatively charged enantiomeric organic disulfates containing two chiral centers was investigated by capillary electrophoresis using cyclodextrin based chiral selectors added to the run buffer. The optimum separation for the enantiomers was achieved in less than 3 min at 25 degrees C with a run buffer of 10 mM glycine pH 2.4 and 5 mM QA-beta-CD, which is a positively charged quaternary ammonium beta-cyclodextrin derivative. The method resulted in baseline resolution, excellent linearity, and highly reproducible migration times allowing facile evaluation of the enantiomeric purity of the individual isomers. Detection limits for the enantiomeric pair were determined to be 0.3 ng/microl (S/N = 3). The nature of the selector-enantiomer interaction and a quantitative measurement of the apparent stability constants that governed chiral discrimination of the enantiomers with QA-beta-CD were also investigated by UV-Vis spectroscopy and electrospray ionization mass spectrometry.     

α-萘基缩水甘油醚对映体的毛细管区带电泳手性拆分

建立了毛细管区带电泳手性拆分α-萘基缩水甘油醚对映体的方法.考察了不同手性拆分试剂对手性选择性的影响,实验结果表明,20 mmol/L H3PO4-三乙醇胺(pH 2.5)、2%(w/V)HS-β-CD、毛细管温度20 ℃、运行电压-18 kV为最佳分离条件,在该分离条件下α-萘基缩水甘油醚对映体实现基线分离.方法简便、准确,可用于α-萘基缩水甘油醚的手性拆分和对映体过量值(ee,%)测定.     

Method development and validation for the separation and determination of omeprazole enantiomers in pharmaceutical preparations by capillary electrophoresis

A new capillary zone electrophoresis (CZE) method for the separation of omeprazole enantiomers has been developed. Methyl-β-cyclodextrin (methyl-β-CD) was chosen as the chiral selector, and several parameters, such as cyclodextrin structure and concentration, buffer concentration, pH, and capillary temperature were investigated in order to optimize separation and run times. Analysis times, shorter than 8 min were found using a background electrolyte solution consisting of 40 mM phosphate buffer adjusted to pH 2.2, 30 mM β-cyclodextrin and 5 mM sodium disulphide, hydrodynamic injection, and 15 kV separation voltage. Detection limits were evaluated on the basis of baseline noise and were established 0.31 mg/l for the omeprazole enantiomers. The proposed method was applied to five pharmaceutical preparations with recoveries between 84 and 104% of the labeled contents.     

Separation of etodolac enantiomers by capillary electrophoresis. Validation and application of the chiral method to the analysis of commercial formulations

Separation of etodolac enantiomers, which exhibit different biological activity and pharmacokinetic profiles, has been achieved using the randomly substituted (2-hydroxy)propyl-beta-cyclodextrin (HP-beta-CD) as chiral selector in capillary electrophoresis. The selection of this CD was made after screening of different CD derivatives of neutral and anionic nature. The effect on the enantioresolution of the buffer concentration and of the degree of substitution (DS) and concentration of the CD as well as of instrumental parameters, such as the capillary temperature and the separation voltage, were studied. The highest resolution of etodolac enantiomers was around 2.5 using 100 mM phosphate buffer (pH 7.0) with 20 mM HP-beta-CD (DS approximately 4.2) and UV detection at 225 (10) nm with a reference wavelength at 360 (50) nm. Validation of the chiral method in terms of selectivity, linearity, precision (instrumental repeatability, method repeatability, intermediate precision), and the limits of detection and quantitation allowed to evaluate its quality to the analysis of etodolac enantiomers in different pharmaceutical preparations containing racemic etodolac.     

Separation of atropisomers of anti-hepatitis drug dimethyl diphenyl bicarboxylate analogues by capillary electrophoresis with vancomycin as the chiral selector

Separation of atropisomers of analogues of the anti-hepatitis drug dimethyl diphenyl bicarboxylate (DDB) by capillary electrophoresis with vancomycin as the chiral selector is described. Among several tested chiral selectors, including various cyclodextrin derivatives as well as vancomycin, only the latter displayed the enantioselectivity to the studied atropisomers. However, relatively poor separation efficiency was obtained due to the adsorption of vancomycin on the capillary wall. This problem was overcome by modifying the capillary wall with a polycationic electrolyte named hexadimethrine bromide (HDB) to produce a positively charged coating, which minimized the adsorption of vancomycin on the capillary wall by electrostatic repulsion. Moreover, the positively charged coating could shorten the separation time by reversing the EOF because the reversed EOF migrated to the same direction as the negatively charged analyte. Effects of buffer pH, vancomycin and buffer concentrations and applied voltage on the separation were investigated and the optimal conditions were established as follows: 40 mM Tris-phosphate buffer (pH 6.0) containing 6.0 mM vancomycin and 0.001% HDB. Baseline separation of three racemic DDB analogues was obtained within 12 min under the optimal conditions.     

Rapid enantiomeric separation of polychlorinated biphenyls by electrokinetic chromatography using mixtures of neutral and charged cyclodextrin derivatives

Electrokinetic chromatography with cyclodextrin derivatives (CD-EKC) was used to achieve the rapid enantiomeric separation of chiral polychlorinated biphenyls (PCBs). Thirteen of the 19 chiral PCBs stable at room temperature were individually separated into their two enantiomers by using 2-morpholinoethanesulfonic acid (MES) buffer (pH 6.5) containing carboxymethylated gamma-cyclodextrin (CM-gamma-CD) as pseudostationary phase mixed with beta-cyclodextrin (beta-CD) or permethylated beta-cyclodextrin (PM-beta-CD). Urea was also added to increase the solubility of PCBs and cyclodextrins in the aqueous separation buffer. Several experimental parameters such as the nature, concentration, and pH of the buffer, nature and concentration of the cyclodextrin derivatives used, and the addition of different additives were studied in order to improve the enantiomeric separation. In addition, the effect of some instrumental parameters such as separation temperature and applied voltage was also investigated. PCBs were enantiomerically separated in less than 12 min by using a 50 mM MES buffer (pH 6.5) containing 20 mM CM-gamma-CD, 10 mM beta-CD or 20 mM PM-beta-CD, and 2 M urea at a temperature of 45 degrees C and an applied voltage of 20 kV.     

Chiral separation of labetalol stereoisomers in human plasma by capillary electrophoresis

A newly derivatized cyclodextrin [octakis-(2,3-diacetyl-6-sulfato)-gamma-cyclodextrin] was investigated as a chiral selector in capillary zone electrophoresis in a study of the chiral separation of labetalol stereoisomers. Heptakis(2,3-diacetyl-6-sulfato)-beta-cyclodextrin (HDAS-beta-CD) and octakis(2,3-diacetyl-6-sulfato)-gamma-cyclodextrin (ODAS-gamma-CD) were shown to be effective in separating labetalol stereoisomers. Optimal separating conditions of the four stereoisomers of labetalol were achieved with 10 mM HDAS-beta-CD and 10 mM ODAS-gamma-CD in an acidic pH buffer of low molarity. Data illustrating the effects of capillary length and cyclodextrin concentration on the separation are presented. The longer capillary length and high voltage enabled the baseline separation of all isomers in less than 15 min. The optimized method was applied to the analysis of human control plasma containing labetalol utilizing solid-phase extraction (SPE) in the 96-well format.     

Sodium maleopimaric acid as pseudostationary phase for chiral separations of amino acid derivatives by capillary micellar electrokinetic chromatography

A new type of chiral surfactant, sodium maleopimaric acid (SMA), was synthesized, and employed for the enantioselective micellar electrokinetic chromatographic (MEKC) separation of amino acid enantiomers derivatized with naphthalene-2,3-dicarboxaldehyde (NDA-D/L-AAs). The effect of the surfactant concentration, type and concentration of the BGE, and buffer pH on the resolution was studied, and optimized conditions were used to evaluate the ability of this new surfactant to perform chiral separations toward NDA-D/L-AAs by MEKC. Enantiomeric separations of NDA-D/L-AAs were achieved with a running buffer consisting of 100 mM borate (pH 9.5) and 20 mM SMA in a 58.5 cm length x 50 microm id capillary. Under the conditions selected, two pairs of tested amino acid enantiomers including NDA-D/L-trptophan (Trp) and NDA-D/L-kynurenine (Kyn) were resolved.     

Capillary electrophoresis and molecular modeling of the chiral separation of aromatic amino acids using α/β-cyclodextrin and 18-crown-6

In this work, chiral separation of enantiomers of three amino acids was achieved using capillary electrophoresis technique with α-cyclodextrin (αCD) as a running buffer additive. Only tryptophan has exhibited baseline separation in the presence of αCD, while the enantiomers of the other two amino acids, phenylalanine and tyrosine, were only partially separated. The addition of 18-crown-6 (18C6) as a second additive imparted only slight improvement to the separation of all enantiomers. On the other hand, all three racemic amino acid mixtures demonstrated no indication of separation when the larger cavity cyclodextrin members, β- and γCD, are used as running buffer chiral additives. However, remarkable improvements in the separation of the enantiomers of phenylalanine and tyrosine were obtained when 18C6 is used together with βCD as a running buffer additive. Surprisingly, tryptophan enantiomers were not separated by the dual additive system of cyclodextrin and crown ether. Using electrospray ionization mass spectrometry (ESI-MS), all amino acids were found to form stable binary complexes with individual hosts as well as ternary compounds involving the crown ether and the cyclodextrin. Furthermore, we used molecular dynamics (MD) simulations to build a clear picture about the interaction between the guest and the hosts. Most of these complexes remained stable throughout the simulation times, and the molecular dynamics study allowed better understanding of these supramolecular assemblies.     

毛细管区带电泳法拆分匹伐他汀钙对映体

建立了匹伐他汀钙对映体的毛细管区带电泳(CZE)拆分方法。分别考察了电泳电压,缓冲溶液种类、浓度及pH值,环糊精种类及浓度,添加剂种类及浓度等参数对实验结果的影响,从而确定了匹伐他汀钙对映体的最佳拆分条件: 电泳电压为18 kV;运行缓冲溶液为80 mmol/L的Tris-HCl缓冲体系,pH值为3.20,其中含有50 mmol/L HP-β-CD(羟丙基-β-环糊精)和5 mmol/L SDS(十二烷基磺酸钠);采用重力进样,进样高度17 cm,进样时间为2 s。在优化的实验条件下,匹伐他汀钙对映体得到了较好的分离,分离度可达2.17。实验结果表明该方法可用于匹伐他汀钙对映体的分离,具有快速、便捷、准确性好等优点。     

Chiral separation of four fluoroquinolone compounds using capillary electrophoresis with hydroxypropyl-beta-cyclodextrin as chiral selector

A capillary zone electrophoresis (CZE) investigation on the enantiomeric separation of lomefloxacin, gatifloxacin, pazufloxacin and ofloxacin was undertaken. Resolution of the enantiomers was achieved using hydroxypropyl-beta-cyclodextrin (HP-beta-CD) as the chiral selector. Parameters influencing separation include cyclodextrin concentration, separational potential, pH and organic additive are discussed. A buffer consisting of 70 mM phosphate and 40 mM HP-beta-CD at pH 3.96 was found to be highly efficient for the separation of lomefloxacin, at pH 3.90 for gatifloxacin, at pH 5.04 for pazufloxacin and at pH 2.16 for ofloxacin. To the best of our knowledge, this is the first report on the enantiomeric resolution of lomefloxacin and gatifloxacin applying CE.     

Chiral separation of 12 pairs of enantiomers by capillary electrophoresis using heptakis‐(2,3‐diacetyl‐6‐sulfato)‐β‐cyclodextrin as the chiral selector and the elucidation of the chiral recognition mechanism by computational methods

Chiral separation of 12 pairs of basic analyte enantiomers including oxybutynin, bambuterol, tradinterol, clenbuterol, clorprenaline, terbutaline, tulobuterol, citalopram, phencynonate, fexofenadine, salbutamol, and penehyclidine was conducted by capillary electrophoresis using a single‐isomer anionic β‐cyclodextrin derivative, heptakis‐(2,3‐diacetyl‐6‐sulfato)‐β‐cyclodextrin as the chiral selector. Parameters influencing separation were studied, including background electrolyte pH, heptakis‐(2,3‐diacetyl‐6‐sulfato)‐β‐cyclodextrin concentration, buffer concentration, and separation voltage. A background electrolyte consisting of 50 mM Tris‐H₃PO₄ and 6 mM heptakis‐(2,3‐diacetyl‐6‐sulfato)‐β‐cyclodextrin at pH 2.5 was found to be highly efficient for the separation of most enantiomers, with other conditions of normal polarity mode at 10 kV, detection wavelength of 210 nm using hydrodynamic injection for 3 s. Under the optimal conditions, baseline resolution (>1.50) for 11 pairs of enantiomers and somewhat lower resolution for penehyclidine enantiomers (1.17) were generated. Moreover, the possible mechanism of separation of clenbuterol, oxybutynin, salbutamol, and penehyclidine was investigated using a computational modeling method.     

Chromatographic evaluation and comparison of three beta-cyclodextrin-based stationary phases by capillary liquid chromatography and pressure-assisted capillary electrochromatography

Enantiomer separations were performed on three beta-cyclodextrin-based chiral stationary phases (CSP) containing the pernaphthylcarbamoylated beta-cyclodextrin (CSP 1), peracetylated beta-cyclodextrin (CSP 2) and permethylated beta-cyclodextrin (CSP 3) as chiral selectors by capillary liquid chromatography and pressure-assisted capillary electrochromatography in this study. Triethylammonium acetate/MeOH or phosphate buffer/MeOH was used as the mobile phase. The experimental factors affecting chiral separations have been examined for each CSP, including pH of the buffers, methanol content and applied voltage. Under optimal separation conditions, a number of racemic compounds were resolved into their enantiomers on three cyclodextrin-based CSP. A comparative study on the performance of three CSP revealed the presence of carbonyl functional groups as well as aromatic rings in the cyclodextrin derivatives, enhanced the interaction between the analytes and CSP, and thus improved enantioselectivity of the CSP.