Applications of electronic speckle interferometry (ESI) techniques for spacecraft structural components

Laser-based electronic speckle interferometry (ESI) techniques, viz., electronic speckle pattern interferometry (ESPI) and electronic speckle shearographic interferometry (ESSI) are used for testing of spacecraft structural components. The combined ESPI and ESSI system developed in house was successfully used for the non-destructive evaluation (NDE) of honeycomb sandwich panels and propellant tanks of Indian Space Research Organization (ISRO). Debonds between face sheet and the honeycomb core were identified using (i) thermal and (ii) dual vacuum stressing methods. On-line NDE of the propellant tanks under internal pressure loading for identification of the minute cracks and thickness reduction areas were successfully implemented by ESI.     

热传导方程在散斑条纹图相位提取中的应用

去除电子散斑十涉条纹图中的噪声是提取条纹图相位的关键问题.利用热传导方程去除条纹图中的噪声,定性和定量分析了该方法的滤波性能.在此基础上,进一步将MBO算法和热传导方程应用于条纹二值化和相位图平滑过程中,并成功地从单幅模拟条纹图中提取了条纹图的相位.研究结果表明,热传导方程能有效减少散斑条纹图中的噪声,改善二值条纹图的边界.进而获得准确的相位分布.     

A novel method to obtain electronic speckle pattern interferometry fringe patterns with high contrast

Traditional speckle fringe patterns of electronic speckle pattern interferometry （ESPI） are obtained by adding, subtracting, or multiplying the speckle patterns recorded before and after the deformation. However, these speckle fringe patterns are of limited visibility, especially for addition and multiplication fringe patterns. We propose a novel method to obtain speckle fringe patterns of ESPI from undeformed and deformed speckle patterns. The fringe pattern generated by our method is of high contrast and has better quality than subtraction fringe. The new method is simple and does not require more computational effort. The proposed method is tested on the experimentally obtained undeformed and deformed speckle patterns. The experimental results illustrate the performance of this approach.     

大剪切电子散斑干涉的载频调制与位移场测量

将电子散斑干涉场的载波调制引入到大剪切电子散斑干涉中,通过对参考物的微小偏转引入载波条纹;利用傅里叶变换法,解调出了变形场的相位,从而实现了物体变形场的精确测量。讨论了大剪切载频的调制机理,理论分析表明,调制条纹的空间频率与参考面偏转的角度成正比;因此,控制参考面的偏转角度可实现不同位移量系统的调制。利用中心加载周边固定圆盘进行了典型实验,实验结果证明在大剪切电子散斑干涉技术中可以通过参考面的旋转高质量地实现电子散斑干涉条纹的调制,求解位移场。该系统具有系统简单,不需要专门引入参考光,条纹质量好等优点。该技术可扩展电子散斑干涉的应用范围,有一定的实际应用价值。     

Improved evaluation of electronic speckle pattern interferograms by photogrammetric image analysis

Electronic speckle pattern interferometry (ESPI) is a well-established tool for non-destructive testing. It allows the quantitative determination of surface deformations and micro-movements with a sub-micrometer resolution. In the case of objects which are extended in depth, however, the evaluation and interpretation of the resulting correlation fringe patterns can be affected by perspective image distortions as well as by a varying image size. In this paper a method for combination of ESPI with a photogrammetric 3D coordinate measurement is presented. In this way, interferogram data are precisely allocated in 3D-space. Furthermore, it is possible to take into account a spatially varying sensitivity vector. The utilizability of the method is demonstrated by a deformation measurement on a stone sculpture.     

High-speed ESPI and related techniques: overview and its application in the automotive industry

This paper provides an overview of recent developments and applications of high-speed electronic speckle pattern interferometry (ESPI) and related techniques ranging from high-speed pulsed laser techniques to high-speed camera methods. Different methods for extracting the phase distribution from high-speed ESPI fringe patterns are compared. Unique applications in the automotive industry using these techniques are provided. Finally, the outlook for high-speed ESPI and high-speed digital holographic interferometry are discussed.     

Variational denoising method for electronic speckle pattern interferometry

Traditional speckle fringe patterns by electronic speckle pattern interferometry (ESPI) are inherently noisy and of limited visibility, so denoising is the key problem in ESPI. We present the variational denoising method for ESPI. This method transforms the image denosing to minimizing an appropriate penalized energy function and solving a partial differential equation. We test the proposed method on computer-simulated and experimental speckle correlation fringes, respectively. The results show that this technique is capable of significantly improving the quality of fringe patterns. It works well as a pre-processing for the fringe patterns by ESPI.     

散斑条纹图的自适应窗口滤波方法

针对散斑噪声很难用常用的滤波方法进行滤除,在已有等值线滤波方法的基础上,提出一种更优的自适应窗口滤波方法。由于等值线窗口是在条纹方向图的基础上得到的,深入研究条纹方向的求取方法,提出了一种更为可靠的条纹方向求取算法,在得到高精度条纹方向的同时,还能估计出条纹的密度。使用等值线窗口技术,保持了窗口形状的自适应能力,然后利用对条纹密度的估计,根据条纹的宽度来确定滤波窗口的大小,实现了滤波窗口大小的自适应。最后,根据条纹方向和滤波后的图像可以直接得到条纹密度变化较大的单幅散斑图的相位结果。     

The separation of out-of-plane displacement from in-plane components by fringe carrier method based on large image-shearing ESPI

A fringe carrier method for separating out-of-plane displacement from in-plane components based on large image-shearing electronic speckle pattern interferometry (ESPI) is presented. If the test object is respectively illuminated by two expanded symmetric illuminations in large image-shearing ESPI, two interferometers are formed. Carrier fringe patterns can be introduced by tilting reference surface a small angle. The carrier fringe patterns are demodulated after deformation of the object. Two phase maps, which include out-of-plane and in-plane displacement, can be obtained by using Fourier transform. Then out-of-plane displacement can be easily separated from in-plane displacement by simple operation between two unwrapped phase distributions. The principle of spatial carrier frequency modulation in large image-shearing ESPI is discussed. A typical three-point-bending experiment is completed. Experimental results are offered. The results show that the method offers high visibility of carrier fringes. And the system presented does not need a special beam as a reference light and has simple optical setup.     

Evaluation of a method to determine interferometric phase derivatives

A recently published method for the determination of phase derivatives maps by direct manipulation of three or more phase-shifted interferograms is tested for accuracy. The method is evaluated on computer-simulated holographic and electronic speckle pattern interferometry fringes and the results are assesed through the calculation of two comparative parameters: the relative image difference and the linear correlation coefficient. It is shown that errors in the phase derivative strongly depend on the filtering method used for smoothing the fringe patterns. An experimentally recorded ESPI fringe pattern is used to confirm the predictions of the numerical simulations.     

基于改进旋滤波的电子散斑干涉图滤波方法

电子散斑干涉术条纹图在成像时不可避免地受散斑噪声调制,去除噪声是散斑干涉条纹处理的一项重要任务。利用散斑条纹图的方向性,提出一种基于模糊方向的旋滤波:在当前点的领域内定义4个模糊方向窗口,将传统旋滤波的一维、精确方向窗口的确定,转变为模糊方向窗口的确定;在确定的窗口内进行低通滤波时,采用自适应加权均值滤波代替传统的中值滤波。利用该方法分别处理模拟散斑条纹图和实验所得的真实条纹图,并与传统旋滤波、双边滤波和小波丢弃子带方法比较。实验结果表明,该改进算法在滤除散斑条纹图噪声的同时,有效保护了条纹的细节信息。     

Batch skeleton extraction from ESPI fringe patterns using pix2pix conditional generative adversarial network

Optical Review - The key to measurement by electronic speckle pattern interferometry (ESPI) is to obtain accurate phase information from the ESPI fringe patterns. We propose a fast batch skeleton...     

The design of a non-cube beam-splitter used for electronic speckle pattern interferometry

A non-cube beam-splitter (NCBS) is proposed, by which an incident beam can be separated largely in a direction and then the lights from the test object and the lights from a reference surface placed adjacently to the test object can be combined to construct a simple electronic speckle pattern interferometry (ESPI) system. Two mainly useful quantitative ways, to calculate the phase change of the test object, the phase-shift and the fringe carrier method with Fourier transform, can be achieved in the ESPI system with the NCBS. Experiments with phase-shifting and fringe carrier method are completed. The experimental results show that the monolithic design of the proposed NCBS is effective in ESPI measurement and immunity to vibrations.     

Continual deformation analysis with scanning phase method and time sequence phase method in temporal speckle pattern interferometry

If a laser beam illuminates a continual deformation object surface, it will lead to a temporal speckle pattern on the observation plane. Recording this time-dependent speckle pattern the deformation of the surface of an object can be obtained. Two methods, scanning phase method (SPM) and time sequence phase method (TSPM), have been introduced for measuring the displacement caused by the deformation in temporal speckle pattern interferometry (TSPI). Their principle is that by capturing a series of speckle interference patterns related to the object deformations, the fluctuations in the intensity of the interference patterns can be obtained. Through scanning these fluctuations and estimating both the average intensity and modulation of the temporal speckle interference patterns, the phase maps for whole-field displacements are calculated. In this way one is capable of quantitatively measuring continual displacements simply using a conventional electronic speckle pattern interferometry (ESPI) system without phase shifting or a carrier. The elaboration on the new methods is given in this paper and experiments are performed to demonstrate their performance with a conventional ESPI system.     

时间序列散斑干涉场中相位函数的计算

散斑干涉或电子散斑干涉计量应用于连续运动或变形物体时,就会产生一个时变的散斑干涉场,通过摄像系统连续地采集这一时变散斑场,可获得一系列时间序列散斑干涉图,通过对序列散斑图上各点在时间轴上光强值的变化进行分析,提出了一种基于时间序列的分析方法,用以提取干涉场的相位值,进而获得物体全场变形信息。     

Automatic interferogram analysis techniques applied to quasi-heterodyne holography and ESPI

This paper describes significant developments in methods for the automatic, quantitative analysis of interferograms. All areas of analysis have been considered: fringe field generation, pre-processing, and phase unwrapping.

A new quasi-heterodyne holographic technique is described in which the image is reconstructed using a single beam. The errors in the reconstructed fringe field are mainly linear in form, and an error compensation scheme is proposed. The final error in the phase measurement using automatic analysis is λ/40.

The process of image smoothing by an averaging filter is considered to reduce the effects of random noise. It is shown that by measuring the signal-to-noise ratio of the fringe field an optimum degree of smoothing may be applied. This is demonstrated on holographic and electronic speckle pattern interferometry (ESPI) data.

Two methods for cosinusoidal fringe image combination are compared, using three or four fields. It is shown that an automatic analysis can be achieved using four phase stepped images.

A new algorithm to automatically unwrap the phase of complex fringe patterns is described. The fringe field is segmented into small rectangular areas, called tiles. This allows local data to be obtained on fringe consistency and density. A confidence tree can then be formed to produce an optimal solution for the whole field. Results are presented and discussed for both holographic and ESPI data.     

Application of ESPI-method for strain analysis in thin wall cylinders

The Centre for Industrial and Engineering Optics, DIT, Ireland, have recently developed and applied new optical techniques for the measurement of mechanical strain, one of which was based on electronic speckle pattern interferometry (ESPI). The accuracy of this optical technique when used on flat surfaces is well established. In this research the technique is tested on curved surfaces, and results are compared with the theoretical hoop strain as predicted by the bi-axial strain equation modified for the thin cylinder, and by those obtained by electrical resistance strain gauge (ERSG) undoubtedly the principal method of measuring mechanical strain. For testing procedures, a special unit was designed and produced for holding and loading the thin cylinder. Also the basic equation for hoop strain by ESPI for flat surfaces was modified for applications on curved surfaces.Thin cylinder hoop strain obtained by ESPI and calculated by a modified equation show remarkably good correlation to the predicted theoretical value as well as to the results obtained by ERSG. Since the ESPI theory was originally developed for use on flat surfaces, there are reasonable grounds for further investigating this relationship especially where curved surfaces are involved.     

Displacement measurements in structural elements by optical techniques

Speckle metrology and holographic interferometry (HI) have been used in several civil engineering applications. We present the results obtained by applying speckle photography (SP) to the study of two quadratic shearwalls with different boundary conditions, and the potential of the technique in the study of this kind of structures is described. The analysis of Young's fringes obtained with this technique at certain points on each shearwall provides the whole field of displacement measurements. HI has been used to measure the three components of absolute displacement, verifying that the bulging phenomenon does not affect the in-plane components when the applied load remains on the same plane as the shearwall. A qualitative analysis is carried out following an electronic speckle pattern interferometry (ESPI) technique. The results obtained by optical techniques are compared to the numerical results obtained by the finite element method (FEM), finding good correlation between them in all the cases.     

电子散斑测振技术进展

综述了电子散斑在振动测量中的发展和应用,对电子散斑测振的各种方法进行评价。     

Electronic speckle pattern interferometry using a CO2 laser

The advantages and problems of using electronic speckle pattern interferometry (ESPI) at longer (infra-red) wavelengths are discussed. The adjustment and use of an ESPI set-up with a CO₂ laser and pyroelectric vidicon are described and illustrated by some experimental results.