A planar left-handed metamaterial based on electric resonators

A planar left-handed metamaterial(LHM) composed of electric resonator pairs is presented in this paper.Theoretical analysis,an equivalent circuit model and simulated results of a wedge sample show that this material exhibits a negative refraction pass-band around 9.6GHz under normal-incidence and is insensitive to a change in incidence angle.Furthermore,as the angle between the arm of the electric resonators and the strip connecting the arms increases,the frequency range of the pass-band shifts downwards.Consequently,this LHM guarantees a relatively stable torlerence of errors when it is practically fabricated.Moreover,it is a candidate for designing multi-band LHM through combining the resonator pairs with different angles.     

平均折射率为零的光子晶体中缺陷模频率特性的实验研究

利用传输线技术制备了左手材料,将左手材料与正常材料交替排列组合成平均折射率为零的一维光子晶体.该光子晶体在特定频段具有光子带隙,带隙不随晶格尺度和入射角的变化而改变.通过掺杂技术破坏光子晶体的周期性,可在禁带中引入缺陷模,这种结构的光子晶体可用于实现滤波器小型化和超强耦合.研究表明,通过调节缺陷的厚度可以控制缺陷模的频率,这为调节频率提供了一种方法.实验与仿真结果相符. 关键词： 左手材料 复合左右手传输线 光子晶体     

SU-8 based planar metamaterials with fourfold symmetry as selective terahertz absorbers

We report on the absorption properties of polarization-insensitive transmissive and reflective metamaterial absorbers based on two planar aluminium periodic structures and SU-8 epoxy resist. These absorbers were investigated using numerical simulation and experimental methods in the terahertz range (below 2 THz). SU-8 is a very promising organic material for dielectric layers in planar metamaterials, because its application simplifies the process of fabricating these structures and significantly reduces the fabrication time. The experimental absorption of the metamaterial absorbers has narrowband characteristics that were consistent with the numerical simulations. Power flow analysis in the transmissive metamaterial unit cell shows that the absorption in the terahertz range occurs primarily in the SU-8 layer of the absorber.     

基于频率选择表面的双层改进型互补结构太赫兹带通滤波器研究

通过仿真计算和实验研究了一种基于频率选择表面的双层改进型互补结构太赫兹带通滤波器.对四裂缝互补型电感电容式谐振单元结构进行了改进,可以在提高滤波性能的同时增加单晶石英介质衬底的厚度.利用电磁仿真技术设计并加工了中心频率为0.28 THz的带通滤波器,并利用太赫兹时域光谱仪测试了在0.1—0.6 THz范围内此滤波器的传输频谱特性,实验结果与仿真结果基本一致.结果表明,利用双层改进型互补结构可以设计出对于入射角度不敏感、带外抑制佳、边带陡峭度大、能有效抑制寄生谐振的宽带太赫兹带通滤波器,并降低了加工难度.     

异向介质谐振响应的Floquet模分析

将开口谐振环单元的场分布利用Floquet模展开,从电磁波传播角度揭示了凋落模引起异向介质谐振响应的事实.数值计算了任意平面电磁波照射下异向介质的传输特性.研究表明,对于来自主平面上的垂直或平行极化的入射波,具有相同极化方式的Floquet透射模将发生谐振,并且磁谐振和电谐振将随着入射角的不同而改变.而对于来自其他入射平面的电磁波,两种极化的Floquet透射模将共同发生谐振. 关键词： 开口谐振环 异向介质 Floquet模 谐振     

基于平面互补靶标的线结构光标定系统

为提升线结构光传感器的标定效率与精度,设计了一种集成自背光可调节位姿的平面棋盘格-同心圆互补线结构光标定系统。该系统基于同心圆圆心的真实投影位置与投影椭圆圆心位置的几何关系,建立非线性优化偏心误差补偿模型,精确得到透射投影下圆心偏心误差补偿位置。该方法与传统标定方法对比降低重投影误差84.7%,有效解决了圆形标志物偏心误差补偿的高精度标定难题。通过将相机坐标系下过光心、光条中心线的平面与靶标平面结合,多次获取空间交线的坐标信息增加特征点,并使用最小二乘法拟合光平面方程,解决了因特征点少从而平面拟合标定精度较低的问题。在复杂环境下重复实验测得大尺寸砂轮外径误差均值为0.005 1 mm,结果表明该标定系统具有一定的准确性和简便实用性。     

基于环磁美特材料的无线传能系统

传统的四线圈磁共振耦合无线传能系统已在移动电子设备、电动汽车无线充电中得以应用,然而,其传能效率仍然因其磁场空间分布的发散性而难以提高.为了克服上述缺点,我们提出了一种基于环磁美特材料、磁场更为局域的高效无线传能系统.该系统将四线圈系统中的一对磁谐振耦合线圈替换为具有环磁谐振特性的四个非对称开口谐振环.该环磁模式具有高Q值、低金属损耗以及辐射抑制的特性.实验结果表明,相对于四线圈系统,该系统的磁场更为集中,能量传输效率更高.     

Plasmon-induced absorption in stacked metamaterials based on phase retardation

In this paper, based on the constructive interference of plasmonic dipolar and quadrupolar modes, a classical analogue of electromagnetically induced absorption （EIA） is demonstrated theoretically in a stacked metamaterial consisting of a short metal strip （which acts as a bright resonator） and a long metal strip （acting as a dark resonator）, which has been reported to support the electromagnetically induced transparency （EIT） effect. The transition from EIA to EIT can be clearly observed in the absorbance spectra via varying the vertical spacing between two resonant oscillators. With the help of the coupled two-oscillator model, the phase shift between the bright and dark resonance modes is calculated by fitting the simulated absorbance spectra, which reveals the physical mechanisms behind constructive and destructive interference effects in EIT/EIA metamaterials.     

Numerical demonstration of three-dimensional terahertz metamaterials based on the causality principle

A parameter retrieval algorithm based on the causality principle and Kramers-Kronig （KK） relations is employed to calculate the effective parameters of three-dimensional （3D） metamaterials. Using KK relations, the branch selecting problem, which is the challenge of effective parameter retrieval method, can be removed. To reveal the validity of the proposed algorithm, the constitutive refractive index of a homogeneous polymide cube is extracted. The result is in excellent agreement with the intrinsic refractive index of the polymide. Finally, the two terahertz metamaterials with 3D structures are designed and their effective parameters are then retrieved using the proposed algorithm. Numerical simulations are performed using the fuiI-wave electromagnetic solver, CST Microwave Studio.     

基于二维特异材料波导的表面电磁波的慢波实验研究

本文在理论分析的基础上,实验研究了二维MNG/DPS/MNG(磁单负材料/双正材料/磁单负材料)表面波波导中的慢波效应.该波导的色散曲线随着电路参数(单元电容)的改变而改变,而且在色散曲线的截止频率点,电磁波的群速度理论上等于零.因此可以通过改变MNG区域的电路参数,得到在不同截止频率的慢波特性.另外,本文还通过改变MNG区域的电路参数实现在某一固定频率下波速度渐变的慢波效应.实验结果与仿真结果相一致.     

Monochromatic Composite Right/Left Handedness in the Quantized Composite Right/Left Handed Transmission Line

Macro composite right/left handedness (CRLH) signifies positive/negative refraction index in different frequency bands in the composite right/left handed transmission line (CRLH-TL). In this paper, the refraction index of a quantized CRLH-TL in the thermal squeezed state is visited. Performing explicit calculations on the squeezed parameters and electronic components' parameters, a novel regime for implementing CRLH with a single operating frequency via the squeezed parameters and electronic components' parameters is found. The definitely different monochromatic CRLH enriches the initial definition of CRLH, and may propose a novel direction to implement CRLH in metamaterials.     

基于石墨烯互补超表面的可调谐太赫兹吸波体

通过在石墨烯超表面设计周期性切条,实现了基于石墨烯互补超表面的可调谐太赫兹吸波体.通过改变外加电压来改变石墨烯的费米能级,吸波体实现频率可调谐特性.研究了石墨烯费米能级、结构尺寸对超材料吸波体吸收特性的影响,并利用多重反射理论研究了其物理机理并且证明了模拟方法的可行性.研究结果表明:当石墨烯费米能级取0.6 eV,基底厚度13μm,石墨烯上切条长宽分别为2.9μm,0.1μm时,吸波体在1.865 THz可以实现99.9%的完美吸收;石墨烯费米能级从0.4 eV增大到0.9 eV,吸波体共振频率从1.596 THz蓝移到2.168 THz,且伴随共振吸收率的改变,吸收率在0.6 eV时达到最大;通过改变费米能级实现的最大吸收率调制度达84.55%.     

Guided mode resonance in planar metamaterials consisting of two ring resonators with different sizes

We proposed and experimentally investigated a two-ring-resonator composed planar hybrid metamaterial(MM), in which the spectra of guided mode resonance(GMR) and Fano resonance or EIT-like response induced by coherent interaction between MM resonance and GMR can be easily controlled by the size of the two rings in the terahertz regime.Furthermore, a four-ring-resonator composed MM for polarization-insensitive GMRs was demonstrated, where GMRs of both TE and TM modes are physically attributed to the diffraction coupling by two ±45° tilting gratings. Such kind of device has great potential in ultra-sensitive label-free sensors, filters, or slow light based devices.     

基于磁谐振器加载的宽频带超材料吸波体的设计

基于加载集总元件的磁谐振器设计了一种宽频带、极化不敏感和宽入射角的超材料吸波体.该吸波体的结构单元由加载集总元件的磁谐振器、介质基板和金属背板组成.仿真得到的加载集总元件和不加载集总元件情况下一维阵列结构吸波体的吸收率表明,相对于不加载集总元件的情况,加载集总元件的一维阵列结构吸波体能够实现宽频带吸波.仿真得到的集总电阻和集总电容取不同值时一维阵列结构吸波体的吸收率表明,集总电阻和集总电容都存在一个最佳值,此时吸波体的吸收率最高、吸收带宽最宽.仿真得到的基板有耗和无耗情况下一维阵列结构吸波体的吸收率表明, 关键词： 磁谐振器 集总元件 宽频带 超材料吸波体     

基于TE10矩形波导的异向介质有效本构参数提取算法

提出了一种基于TE₁₀矩形波导的异向介质有效本构参数提取算法,利用该算法提取了对称多元胞铁氧体和金属线阵复合型异向介质的有效介电常数ε和有效磁导率μ.文中着重探讨了多元胞异向介质传播常数β实部的分枝选取问题,借鉴了测量理论中测量值和理论真值之间的关系,将单元胞的β提取值作为多元胞β的测量值,进而确定多元胞β的真实值;由于在多元胞异向介质各元胞之间存在耦合效应,使电磁波主要以周期性Bloch波的形式存在 关键词： 10矩形波导')" href="#">TE₁₀矩形波导 异向介质 有效本构参数提取 铁氧体和金属线阵异向介质     

含特异材料的光量子阱频率特性研究

基于传输线加载集总元件的方法制备光量子阱. 对阱内物质为光子晶体和左手材料两种情况下的传输特性进行比对. 结果表明局域模个数与阱内物质的周期数相同; 左手材料情况下光量子阱具有尺度小、 便于调节的优点.实验结果与理论结果相符合.     

基于异向传输线的亚波长谐振腔设计

提出了一种新型的谐振腔,该谐振腔的谐振条件与普通谐振腔不同,其两个端面的总相移不必是180°的正整数倍。这种谐振腔由异向传输线和右手传输线两种不同性质的传输线级联构成,它利用耦合腔链作为异向传输线实现负相移,同轴波导作为右手传输线实现正相移,使谐振腔两个端面的总相移为零,满足谐振腔的谐振条件。由于它与传统谐振腔谐振条件不同,理论证明这种谐振腔的长度可远远小于传统谐振腔,设计实例的仿真结果表明这种新型谐振腔的长度最短仅为传统谐振腔的1/7。     

基于电谐振单元的超介质吸波材料及矩形波导匹配终端应用研究

针对在自由空间中测试超介质吸波材料的高复杂性及高成本特点, 实验研究了4种由电谐振单元构成的超介质吸波材料在X波段(8–12 GHz)矩形波导里的吸波性能. 实验结果表明, 此4种吸波材料在终端短路的矩形波导里显示出与其在自由空间中相似的吸波性能及吸波机理.据此, 进一步研究了基于超介质吸波材料的矩形波导匹配终端应用. 分析结果显示, 此种新型匹配终端具有结构紧凑、工作频段可简单控制、成本低等优点. 通过展宽超介质吸波材料的吸波频段可设计出宽频带的矩形波导匹配终端. 关键词： 电谐振单元 超介质 吸波材料 匹配终端