Synthesis and thermoresponsive property of end‐functionalized poly(N‐isopropylacrylamide) with pyrenyl group

N–Isopropylacrylamide (NIPAM) was polymerized using 1‐pyrenyl 2‐chloropropionate (PyCP) as the initiator and CuCl/tris[2‐(dimethylamino)ethyl]amine (Me₆TREN) as the catalyst system. The polymerizations were performed using the feed ratio of [NIPAM]₀/[PyCP]₀/[CuCl]₀/[Me₆TREN]₀ = 50/1/1/1 in DMF/water of 13/2 at 20 °C to afford an end‐functionalized poly(N‐isopropylacrylamide) with the pyrenyl group (Py–PNIPAM). The characterization of the Py–PNIPAM using matrix‐assisted laser desorption ionization time‐of‐flight mass spectrometry provided the number–average molecular weight (M_n,MS). The lower critical solution temperature (LCST) for the liquid–solid phase transition was 21.7, 24.8, 26.5, and 29.3 °C for the Py–PNIPAMs with the M_n,MS's of 3000, 3400, 4200, and 5000, respectively; hence, the LCST was dramatically lowered with the decreasing M_n,MS. The aqueous Py–PNIPAM solution below the LCST was characterized using a static laser light scattering (SLS) measurement to determine its molar mass, M_w,SLS. The aqueous solutions of the Py–PNIPAMs with the M_n,MS's of 3000, 3400, 4200, and 5000 showed the M_w,SLS of 586,000, 386,000, 223,000, and 170,000, respectively. Thus, lowering the LCST for Py–PNIPAM should be attributable to the formation of the PNIPAM aggregates. The LCST of 21.7 °C for Py–PNIPAM with the M_n,MS of 3000 was effectively raised by adding β‐cyclodextrin (β‐CD) and reached the constant value of ～26 °C above the molar ratio of [β‐CD]/[Py–PNIPAM] = 2/1, suggesting that β‐CD formed an inclusion complex with pyrene in the chain‐end to disturb the formation of PNIPAM aggregates, thus raising the LCST. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 1117–1124, 2006     

Unified model of association-induced lower critical solution temperature phase separation and its application to solutions of telechelic poly(ethylene oxide) and of telechelic poly(N-isopropylacrylamide) in water

The authors present a model describing the coexistence of hydrophobic association and phase separation with lower critical solution temperature (LCST) in aqueous solutions of polymers carrying short hydrophobic chains at both chain ends (telechelic associating polymers). The LCST of these solutions is found to decrease along the sol/gel transition curve as a result of both end-chain association (association-induced phase separation) and direct hydrophobic interaction of the end chains with water. The authors relate the magnitude of the LCST decrease to a hydration cooperativity parameter sigma. The LCST decreases substantially (approximately 100 K) in the case of random hydration (sigma=1), whereas only a small shift (approximately 5-10 K) occurs in the case of cooperative hydration (sigma=0.3). The molecular weight dependence of the LCST drop is studied in detail in each case. The results are compared with experimental observations of the cloud points of telechelic poly(ethylene oxide) solutions, in which random hydration predominates, and of telechelic poly(N-isopropylacrylamide) solutions, in which cooperative hydration prevails.     

The imaging of nano and micro globules of short linear thermo responsive polyacrylamides formed above the lower critical solution temperature

An imaging method has been developed to examine thermo responsive polymer coagulates by optical and electron microscopy. Poly-N-isopropylacrylamide (PNIPAM), poly-N-dimethylacrylamide (PDMAM) and a 1:1 PNIPAM-PDMAM copolymer were encapsulated in a gelatin matrix as coagulates above the lower critical solution temperature (LCST), and subsequently examined by optical and electron microscopy. The linear macromolecules PNIPAM and PDMAM were synthesized by chain transfer polymerization with mercaptopropionic acid (3-MPA) as chain transfer reagent. The resulting polymers have an average molar mass of ∼1800 g/mol and low polydispersity. The LCST of thermo responsive polymers is defined in pure water but can also be stimulated at lower than the phase transition temperature employing electrolytes containing inorganic salts such as (NH₄)₂SO₄. Under such conditions the polymers show the typical thermo responsive phase transfer property in form of a visible clouding point. Gelatin was used to maintain this biphasic state by slowly adding water-softened gelatin sheets at a temperature above the LCST, followed by cooling to 3 °C in order to induce gelation. Examination of the gelatin-coagulate matrices by optical and electronic microscopy showed that PNIPAM and its copolymer (PNIPAM/PDMAM 1:1) are entrapped as globular spheres and clusters of spheres. In comparison pure PDMAM, even if it shows a clouding point, does not form typical LCST coagulates. With PNIPAM and the copolymer, micro globule formation is also possible with slow gelatin formation, without first provoking an LCST. In this particular case, the phase transition, or entropic demixing of the polymers respectively, are induced in this case by water absorption of the gelatin matrix.     

Stimuli-Responsive Polymers in Solution Investigated by NMR and Infrared Spectroscopy

Summary: Temperature-induced and solvent composition-induced phase separation in solutions of poly(N-isopropylmethacrylamide) (PIPMAm) and other thermoresponsive polymers as studied by NMR and infrared (IR) spectroscopy is discussed. The fraction p of phase-separated units (units with significantly reduced mobility) and subsequently, e.g., thermodynamic parameters characterizing the coil-globule phase transition induced by temperature, were determined from reduced integrated intensities in high-resolution ¹H NMR spectra. This approach can be especially useful in investigations of phase separation in solutions of binary polymer systems. Information on behaviour of water during temperature-induced phase transition was obtained from measurements of ¹H NMR relaxation times of HDO molecules. NMR and IR spectroscopy were used to investigate PIPMAm solutions in water/ethanol (D₂O/EtOH) mixtures where the phase separation can be induced by solvent composition (cononsolvency). Some differences in globular-like structures induced by temperature and solvent composition were revealed by these methods.     

Salt and Heat Induced Aggregation of Diblock Copolymers of Sodium 2-(acrylamido)-2-methylpropanesulfonate and N-Isopropylacrylamide in Aqueous Solutions

Heat and salt induced aggregation of three well-defined double hydrophilic block copolymers (DHBCs) of sodium 2-(acrylamido)-2-methylpropanesulfonate (AMPS) and N-isopropylacrylamide (NIPAM) with constant chain length of the PAMPS block (with number-average degree of polymerization, DP _n  = 61) and varying chain length of the PNIPAM block with DP _n  = 11, 23, and 34 synthesized via reversible addition-fragmentation chain transfer (RAFT) controlled radical polymerization was investigated by turbidity, dynamic light scattering (DLS) and ¹H NMR measurements. In the presence of salt or with an increase in temperature, the diblock copolymers form micelles with a PNIPAM core and PAMPS corona. The heat and salt induced aggregation in dilute aqueous solutions dependant on the molecular characteristics of the DHBC (DP _n of the PNIPAM block) was observed. The DHBC becomes amphiphilic as the PNIPAM block loses hydrophilicity at higher temperature above its lower critical solution temperature (LCST). Furthermore, the presence of salt induces salting out effect of the uncharged PNIPAM block. The diblock copolymer thus forms nanosized aggregates at a high temperature or in the presence of salt. These aggregates may be multiple aggregates due to inter-micellar aggregation of the spherical core-corona micelles.     

Cononsolvency of poly(N‐isopropylacrylamide) in methanol aqueous solution—insight by dielectric spectroscopy

Both water and methanol are good solvents for poly(N‐isopropylacrylamide) (PNIPAM), while PNIPAM does not dissolve in their mixed solvents, this phenomenon is called cononsolvency. Cononsolvency is closely related to many phenomena in life but so far, its mechanism is still controversial. In this work, the dielectric behavior of PNIPAM methanol aqueous solution was studied in the frequency of 40Hz–40GHz. From lower frequency to higher frequency, four relaxations were found. They are, respectively, from global chain motion, local motion of backbone, motion of side chain group, and the dipole orientation of the solvent molecule. The solvent dependence of dielectric parameters for the chain motion implied that the PNIPAM chain has undergone the coil‐globule‐coil transition. Dielectric analysis to microwave frequency showed that the volume of the bound solvent units on PNIPAM chain increases with the increasing methanol concentration, which suggested that the structure of solvation units bound on PNIPAM side chains undergo a changing process experience from water to water‐methanol cluster to the ternary methanol cluster. This work reveals the structure and dynamics of the PNIPAM chain and the solvent unit that involved in the solvation of PNIPAM, and provides some new insight into the cononsolvency phenomenon. © 2017 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2017 , 55, 1227–1234     

Microphase separation of cationic poly(N-isopropylacrylamide) copolymers in water: Effect of the migration of charges

The structures of aqueous copolymer solutions have been examined through small angle neutron scattering. The copolymers contained mostly N-isopropylacrylamide (NIPAM) monomers. Poly (NIPAM) solutions have a lower critical solution temperature (LCST), above which the macromolecules separate from water. A small fraction of ionizable N,N-[(dimethylamino) propyl] methacrylamide (MADAP) monomers was introduced into the macromolecules. This had dramatic consequences on the solution behavior at temperatures above the LCST of PNIPAM, where phase separation would have been expected for the homopolymer. When all MADAP monomers were ionized, it was found that the solutions resisted the phase separation. At short spatial scales, the chains were collapsed but at large scales they formed branched aggregates that did not separate out of water. When only half of the MADAP monomers are ionized, the electrical charges were able to redistribute themselves along the chains. In this case, the rise in temperature caused a microphase separation where the electrical charges were relocated on a fraction of the chains that remained in solution.The other chains (or section of chains) formed large nodules of a polymer rich phase.     

Phase transition behavior of unimolecular micelles with thermoresponsive poly(N-isopropylacrylamide) coronas

This paper describes the double phase transition behavior of a thermoresponsive poly(N-isopropylacrylamide) (PNIPAM) brush at the surface of a hydrophobic core. Reversible addition-fragmentation transfer (RAFT) polymerization of N-isopropylacrylamide (NIPAM) was conducted by using a hyperbranched polyester (Boltorn H40) based macroRAFT agent. The resultant multiarm star block copolymer (H40-PNIPAM) exists as unimolecular micelles with hydrophobic H40 as the core, densely grafted PNIPAM brush as the shell. A combination of laser light scattering (LLS) and microdifferential scanning calorimetry (micro-DSC) studies of H40-PNIPAM in aqueous solution reveals double phase transitions of the PNIPAM corona, which is in contrast to the fact that free PNIPAM homopolymer in aqueous solution exhibits a lower critical solution temperature (LCST) at approximately 32 degrees C. The first phase transition takes place in the broad temperature range 20-30 degrees C, which can be tentatively ascribed to the n-cluster-induced collapse of the inner region of the PNIPAM brush close to the H40 core; the second phase transition occurs above 30 degrees C, which can be ascribed to the outer region of PNIPAM brush. Employing the RAFT chain extension technique, the inner and outer part of PNIPAM brush were then selectively labeled with pyrene derivatives, respectively; temperature-dependent excimer fluorescence measurements further support the conclusion that the inner part of PNIPAM brush collapses first at lower temperatures, followed by the collapse of the outer part at higher temperatures.     

Programmable Polymer‐Based Supramolecular Temperature Sensor with a Memory Function

A new class of polymeric thermometers with a memory function is reported that is based on the supramolecular host–guest interactions of poly(N‐isopropylacrylamide) (PNIPAM) with side‐chain naphthalene guest moieties and the tetracationic macrocycle cyclobis(paraquat‐p‐phenylene) (CBPQT⁴⁺) as the host. This supramolecular thermometer exhibits a memory function for the thermal history of the solution, which arises from the large hysteresis of the thermoresponsive LCST phase transition (LCST=lower critical solution temperature). This hysteresis is based on the formation of a metastable soluble state that consists of the PNIPAM–CBPQT⁴⁺ host–guest complex. When heated above the transition temperature, the polymer collapses, and the host–guest interactions are disrupted, making the polymer more hydrophobic and less soluble in water. Aside from providing fundamental insights into the kinetic control of supramolecular assemblies, the developed thermometer with a memory function might find use in applications spanning the physical and biological sciences.     

Study of the phase transition of poly(N,N‐diethylacrylamide) in water by rheology and dynamic light scattering

Poly(N,N‐diethylacrylamide) (PDEA) possesses a lower critical solution temperature (LCST) in aqueous media. The solution properties of PDEA at various temperatures have been characterized with techniques such as rheology and dynamic light scattering. There is a decrease in the coil size before the phase transition due to a coil‐to‐globule transition. At the LCST, rheological and dynamic light scattering studies have also confirmed an aggregation phenomenon. This aggregation modifies the rheological properties of the polymer solutions. High frequencies hinder the phase‐transition process and reduce the LCST of the polymers. © 2003 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 41: 1627–1637, 2003     

Conformation of adsorbed layers of polyNIPAM on silica in a binary solvent

The conformation of poly( N-isopropylacrylamide) chains adsorbed at a silica interface was studied as a function of concentration in the methanol-water binary solvent mixture. Both water and methanol are good solvents for PNIPAM; however, in certain mixtures cononsolvency is induced by a lowering of the LCST. This led to a decrease in the extent of the PNIPAM layer away from the interface as measured using the colloidal probe technique in the poor solvent region. At low methanol concentrations but still in the good solvent region capillary bridging between the silica surfaces with adsorbed PNIPAM layers was observed due to the increased methanol concentration in this interfacial region over that of the bulk. Furthermore, adsorption measurements showed that PNIPAM adsorbed only weakly to the silica interface with a low surface excess on the order of 0.23 mg/m (2), which allowed study of the behavior of the immobilized PNIPAM chains under highly dilute conditions using the quartz crystal microbalance. As the concentration of methanol increased toward the phase transition boundary, a slight contraction followed by an expansion of the PNIPAM was observed, which is in agreement with previous predictions from theory for polymers in solution.     

"On-demand" control of thermoresponsive properties of poly(N-isopropylacrylamide) with cucurbit[8]uril host-guest complexes

The chain end complexation of a functional PNIPAM by a cucurbit[8]uril-viologen complex causes a shift in its lower critical solution temperature (LCST) by over 5 °C. An instantaneous phase change of the thermally responsive polymer beyond its LCST can be induced by addition of the aqueous cucurbituril host-guest complex. Subsequent decomplexation upon addition of a competitive guest releases the PNIPAM terminus and triggers complete reversibility.     

Effect of Topology on the Properties of Poly(N-isopropylacrylamide) in Water and in Bulk

Three macrocyclic poly(N-isopropylacrylamide)s (PNIPAM) with molecular weight (MW) ranging from 6 to 19 kg/mol were synthesized by ‘click’ ring closure of the corresponding α-azido ω-propargyl telechelic linear PNIPAMs, themselves prepared by reversible addition fragmentation chain transfer (RAFT) polymerization of N-isopropylacrylamide. Differential scanning calorimetry (DSC) studies revealed that both the thermal phase separation in water and the glass transition in bulk of PNIPAM were affected by polymer topology. In aqueous solution, the cyclic polymers exhibit a higher phase separation temperature and broader phase transition range than the corresponding linear counterparts. In bulk, the cyclic polymers display a higher glass transition temperature of lesser molecular weight dependence, as compared to their linear precursors.     

Synthesis of twin‐tail tadpole‐shaped hydrophilic copolymers and their thermo‐responsive behavior

Twin‐tail tadpole‐shaped hydrophillic copolymers composed of cyclic poly(ethylene gycol) (PEG) and two linear poly(N‐isopropylacrylamide) (PNIPAM) chains have been successfully synthesized by the combination of single‐electron‐transfer living radical polymerization and click chemistry under high concentration. Click cycloaddition reaction occurred between linear PNIPAM‐b‐PEG‐b‐PNIPAM with two azide groups at block junctions and dipropargyl oxalylate with high yield and efficiency. The resulting intermediates and the targeted polymers were characterized by proton nuclear magnetic resonance, fourier transform infrared spectroscopy, and gel permeation chromatography. The thermal phase transition behaviors of twin‐tail tadpole‐shaped polymers and their linear precursors were investigated by temperature‐dependent turbidity measurements, micro differential scanning calorimetry, and laser light scattering. The twin‐tail tadpole‐shaped polymers possess higher critical solution temperature (LCST) and smaller average aggregate size compared with their linear precursors with the same molecular weight. The above differences in the thermal phase transition behaviors should be due to the repulsive forces caused by the ring topology, which prohibited the intermolecular association. © 2009 Wiley Periodicals, © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2009     

Morphological transitions in aggregates of thermosensitive poly(ethylene oxide)‐b‐poly(N‐isopropylacrylamide) block copolymers prepared via RAFT polymerization

Double hydrophilic poly(ethylene oxide)‐b‐poly(N‐isopropylacrylamide) (PEO‐b‐PNIPAM) block copolymers were synthesized via reversible addition‐fragmentation chain transfer (RAFT) polymerization, using a PEO‐based chain transfer agent (PEO‐CTA). The molecular structures of the copolymers were designed to be asymmetric with a short PEO block and long PNIPAM blocks. Temperature‐induced aggregation behavior of the block copolymers in dilute aqueous solutions was systematically investigated by a combination of static and dynamic light scattering. The effects of copolymer composition, concentration (C_p), and heating rate on the size, aggregation number, and morphology of the aggregates formed at temperatures above the LCST were studied. In slow heating processes, the aggregates formed by the copolymer having the longest PNIPAM block, were found to have the same morphology (spherical “crew‐cut” micelles) within the full range of C_p. Nevertheless, for the copolymer having the shortest PNIPAM block, the morphology of the aggregates showed a great dependence on C_p. Elongation of the aggregates from spherical to ellipsoidal or even cylindrical was observed. Moreover, vesicles were observed at the highest C_p investigated. Fast heating leads to different characteristics of the aggregates, including lower sizes and aggregation numbers, higher densities, and different morphologies. Thermodynamic and kinetic mechanisms were proposed to interpret these observations, including the competition between PNIPAM intrachain collapse and interchain aggregation. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 4099–4110, 2009     

Synthesis and characterization of temperature-sensitive cellulose-graft-poly(N-isopropylacrylamide) copolymers

A new series of cellulose-graft-poly(N-isopropylacrylamide)(cellulose-g-PNIPAM) copolymers were prepared by atom transfer radical polymerization(ATRP) of N-isopropylacrylamide monomers from a cellulose-based macro-initiator, which was homogeneously synthesized in an ionic liquid 1-allyl-3-methylimidazolium chloride(Amim Cl). The composition of cellulose-g-PNIPAM copolymers could be adjusted by altering the feeding ratio and reaction time. The resultant copolymers with relatively high content of PNIPAM segments(molar substitution of PNIPAM ? 18.3) were soluble in water at room temperature. Aqueous solutions of cellulose-g-PNIPAM copolymers exhibited clear temperature-sensitive behavior, and their sol-to-gel phase transition properties were investigated by dynamic light scattering(DLS) and UV measurements. Compared with pure PNIPAM, the cellulose-g-PNIPAM copolymers possessed higher lower critical solution temperatures(LCST) in a range from 36.9 ?C to 40.8 ?C, which are close to normal human body temperature, and could be tuned by adjusting the content of PNIPAM segments in copolymers. Spherical structure of cellulose-g-PNIPAM copolymers formed at temperatures above LCST and its morphology was observed by TEM and SEM. These novel cellulose-g-PNIPAM copolymers may be attractive substrates for some biomedical applications, such as drug release and tissue engineering.     

Micro ATR‐FTIR study of the hydration state of poly(N‐tert‐butylacrylamide‐co‐acrylamide) copolymers during phase transition in aqueous media and in the mixture of water–methanol

Coil‐globule transition of poly(N‐tert‐butylacrylamide‐co‐acrylamide) P(NTBAM‐co‐AM) copolymers is investigated in the aqueous solution and in the mixture of water–methanol by micro ATR‐FTIR spectroscopy technique. In this study the microstructure and its changes in the hydration states of the distinct groups of these copolymers are investigated by micro ATR/FTIR technique. The results showed that by heating the solution above the LCST hydrogen bonding between C?O and water was decreased but the hydrogen bonding between polymeric chains increased, which prove the aggregation of polymer chain during phase separation. The chemical shifts of IR bands are also studied in the mixture of water–methanol. © 2009 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 48: 356–363, 2010     

Effect of chain architecture on the phase transition of star and cyclic poly(N‐isopropylacrylamide) in water

The heat‐induced phase transition of aqueous solutions of Poly(N‐isopropylacrylamide) (PNIPAM) in water is examined for a four‐arm PNIPAM star (s‐PNIPAM), a cyclic PNIPAM (c‐PNIPAM), and their linear counterparts (l‐PNIPAM) in the case of polymers (1.0 g L^?1) of 12,700 g mol^?1 < M_n < 14,700 g mol^?1. Investigations by turbidity, high‐sensitivity differential scanning calorimetry (HS‐DSC), and light scattering (LS) indicate that the polymer architecture has a strong effect on the cloud point (T_c: decrease for s‐PNIPAM; increase for c‐PNIPAM), the phase transition enthalpy change (ΔH decrease for s‐PNIPAM and c‐PNIPAM), and the hydrodynamic radius of the aggregates formed above T_c (R_H: c‐PNIPAM < s‐PNIPAM < l‐PNIPAM). The properties of s‐PNIPAM are compared with those of previously reported PNIPAM star polymers (3 to 52 arms). The overall observations are described in terms of the arm molecular weight and the local chain density in the vicinity of the core of the star, by analogy with the model developed for PNIPAM brushes on nanoparticles or planar surfaces. © 2016 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2016 , 54, 2059–2068.     

Two-stage collapse of unimolecular micelles with double thermoresponsive coronas

Phase transition behavior of unimolecular dendritic three-layer nanostructures with dual thermoresponsive coronas is studied. Successive reversible addition-fragmentation transfer (RAFT) polymerizations of N-isopropylacrylamide (NIPAM) and 2-(dimethylamino)ethyl methacrylate (DMA) were conducted using fractionated fourth-generation hyperbranched polyester (Bolton H40) based macroRAFT agent. At lower temperatures (<20 degrees C), dendritic macromolecules H40-poly(N-isopropylacrylamide)-poly(2-(dimethylamino)ethyl methacrylate) (H40-PNIPAM-PDMA) exist as unimolcular core-shell-corona nanostructures with hydrophobic H40 as the core, swollen PNIPAM as the inner shell, and swollen PDMA as the corona. PNIPAM and PDMA homopolymers undergo phase transitions at their lower critical solution temperatures (LCST), which are found to be 32 degrees C for PNIPAM and 40-50 degrees C for PDMA, respectively. Upon continuously heating through the LCSTs of PNIPAM and PDMA, such dendritic unimolecular micelles exhibit two-stage thermally induced collapse. This process is reversible with a two-stage reswelling upon cooling. Laser light scattering, micro-differential scanning calorimetry, and excimer fluorescence measurements are used to investigate the double phase transitions.     

Effect of urea on the conformational behavior of poly(N-isopropylacrylamide)

The effect of urea on the conformational behavior of poly(N-isopropylacrylamide) (PNIPAM) in dilute aqueous solution has been investigated using fluorescence spectroscopy, fluorescence quenching and fluorescence anisotropy measurements via pyrene (Py) probe and acenaphthylene (ACE) label studies. It was demonstrated that urea promotes the partitioning of the hydrophobic probe, Py, towards the bulk aqueous phase at temperatures above the lower critical solution temperature (LCST) of the polymer due to swelling of the compact coil conformation. However, the compact coil structure of the polymer at temperatures greater than its LCST is not completely destroyed, even for urea concentrations up to 3 M, at which the phase transition is hardly observed. As expected, urea has little effect on the conformational behavior of PNIPAM at temperatures below its LCST. Received: 9 February 2000/Accepted: 13 June 2000