Regularities of radiation-stimulated adsorption of <Emphasis Type="Italic">n</Emphasis>-hexane on an aluminum surface

IR reflection-absorption spectroscopy was used to examine the regularities of radiation-stimulated absorption of n-hexane on an aluminum surface. γ-Irradiation of an aluminum surface at room temperature produces sites capable of adsorbing n-hexane by the molecular and dissociative mechanisms. The kinetics of the adsorption of n-on aluminum γ-irradiated with doses of 5 to 25 Gy is indicative of activated dissociative chemisorption accompanied by the formation of aluminum alkyls and surface hydrides. A feasible mechanism for the process was proposed.     

Catalytic activity of H-forms of zeolites in the isomerization of supercritical <Emphasis Type="Italic">n</Emphasis>-pentane and their physicochemical properties

The acidic properties of the H-forms of zeolites ZSM-5, Beta, Y, and mordenite are studied by diffuse reflectance IR spectroscopy using n-pentane as a probe molecule. The decreasing order of Brønsted acid site strengths is constructed. The isopentane selectivity in n-pentane isomerization under supercritical conditions (260°C, 130 atm) increases in the order H-ZSM-5 < H-Beta < H-mordenite(11) ≈ H-Y with decreasing strength of Brønsted sites. Catalytic data are analyzed jointly with the results of physicochemical studies of H-mordenite (temperature-programmed ammonia desorption, benzene adsorption, and IR spectroscopy). Under the supercritical conditions, the conversion of n-pentane on mordenite is determined by the total acidity of the zeolite and also by the accessibility of the acid sites inside the zeolite channels to the reactant.     

Selective Production of Light Olefins from Catalytic Cracking of <Emphasis Type="Italic">n</Emphasis>-Hexane over OSDA-Free Beta Zeolites

The catalytic cracking of n-hexane for producing light olefins on Beta zeolite synthesized under organic structure-directing agent free conditions (OFB) was carried out as a model reaction of naphtha cracking. The Al-rich H-form OFB (HOFB) catalyst exhibited a short catalytic life and a low selectivity to propylene even at the lower reaction temperature of 773 K, due to its high acid amount. Dealumination of HOFB by ammonium hexafluorosilicate (AHFS) treatment and followed by nitric acid treatment resulted in the increase in the catalytic life and propylene selectivity, regardless of the reaction temperatures ranging from 773 to 923 K. This could be attributed to the lower amount of the acid sites especially the Lewis acid sites, which suppressed the secondary reactions of propylene and butenes and the hydride transfer to form coke. For example, the HOFB-AHFS(0.5 M)-HNO₃(6 h) catalyst showed a very high selectivity of ca. 41 C-% to propylene even at nearly 100 % n-hexane conversion, at the higher reaction temperature of 923 K.     

Platinum state in highly active Pt/CeO<Subscript>2</Subscript> catalysts from the X-ray photoelectron spectroscopy data

The states of components of highly efficient Pt/CeO₂ catalysts for low-temperature oxidation of carbon monoxide are studied in detail by X-ray photoelectron spectroscopy (XPS). Using the precise calibration of the spectra relative to the internal standard and the fitting of Ce3d and Pt4f spectra by elementary doublets, we found the features of the platinum interaction with the ceria lattice. It is shown that when the codeposition technique is used, depending on the quality of stock solutions, it is possible to obtain both homogeneous solid solutions of platinum in the ceria lattice and solutions containing polyatomic platinum associates of the (PtO) _m type. It is found that when homogeneous PtCeO _x solid solutions are stored in air at room temperature, the homogeneous solutions slowly pass into the state of solutions with platinum associates. Mechanical mixtures of metallic platinum and ceria nanoparticles, synthesized by laser ablation, were also investigated in the course of their annealing in the air. The results obtained from the Pt4f spectra completely confirm the specific features of the interaction of platinum with ceria.     

催化裂化条件下噻吩与改性Y分子筛的作用机制

以HY、NiY和稀土离子改性的Y分子筛(REY)为研究对象,采用固定床装置评价噻吩模拟油催化裂化性能;运用气相色谱-氢火焰离子发光检测器(GC-FID)、气相色谱-硫化学发光检测器(GC-SCD)和原位红外光谱技术分析产物,关联分子筛的酸性,研究催化裂化条件下噻吩与改性Y分子筛的作用机制。实验结果表明,催化裂化条件下,噻吩与分子筛的作用机制差异主要取决于与B酸或L酸相关的非骨架铝物种或金属离子物种的存在形式。其中,NiY分子筛中,噻吩主要是吸附在与NiOH⁺物种相关的L酸中心,而Ni₄AlO₄³⁺等物种减弱B酸性中心从而降低其裂化性能。对HY来说,噻吩易在与AlO⁺等物种相邻的B酸中心上聚合形成三联噻吩,并发生一定的氢转移和裂化反应;而对REY而言,分子筛中与RE物种相关的L酸位会促进噻吩在与非骨架铝羟基等物种(如Al(OH)₂⁺、Al(OH)²⁺等)相邻的B酸中心形成的二联噻吩发生氢转移和裂化反应。     

Solvent replacement (decane → hexane) in concentrated silver organosols stabilized with sodium bis(2-ethylhexyl) sulfosuccinate

The structure-related properties of silver nanoparticles synthesized in reverse micellar solutions of sodium bis(2-ethylhexyl) sulfosuccinate (AOT) have been studied in the processes of electrophoretic concentraton of nanoparticles, drying of concentrates, and redispersion in n-hexane and n-decane. It has been shown that the dispersity of nanoparticles and stability of organosols to aggregation remain preserved upon the replacement of a low-volatile solvent (decane) by a high-volatile solvent (hexane). The developed procedures enable one to easily regulate important technological characteristics of metal-based inkjet “nanoinks,” such as concentration and size of particles, as well as viscosity and drying rate of the inks.     

Reactivity indexes of antioxidant molecules from <Emphasis Type="Italic">Rosmarinus officinalis</Emphasis>

The reactivity indexes derived from conceptual density functional theory provide the tools for the analysis of the principal antioxidant compounds from Rosmarinus officinalis: carnosic acid, carnosol, genkwanin, rosmadial, and rosmarinic acid. Radicals produced from these compounds are compared to the highly oxidative radicals ·OH and ·OOH, azobisisobutyronitrile, the stable radical from 2,2-diphenyl-1-picrylhydrazyl, and phenol. Ionization energy, electronegativity, hardness, and electrophilicity show clear differences between these two kinds of radical species. In contrast, electrodonating power and electroaccepting power show similar behavior to electrophilicity and electron affinity, respectively. The donor–acceptor map shows the analyzed compounds mainly as good antioxidants and electron donators. The solvent effect of water and n-hexane is considered by applying PCM model calculations that result in a lowering of the values for the DFT reactivity indexes.     

An XPS study of the oxidation of noble metal particles evaporated onto the surface of an oxide support in their reaction with NO<Subscript><Emphasis Type="Italic">x</Emphasis></Subscript>

The interaction of the model catalysts Rh/Al₂O₃, Pd/Al₂O₃, Pt/Al₂O₃, and Pt/SiO₂ with NO _x (mixture of 10 Torr of NO and 10 Torr of O₂) was studied by X-ray photoelectron spectroscopy (XPS). Samples of the model catalysts were prepared under vacuum conditions as oxide films ≥100 Å in thickness on tantalum foil with evaporated platinum-group metal particles. According to transmission electron microscopic data, the platinum-group metal particle size was several nanometers. It was found by XPS that the oxidation of Rh and Pd nanoparticles in their interaction with NO _x occurs already at room temperature. The particles of platinum were more stable: their oxidation under the action of NO _x was observed at elevated temperatures of ～300°C. At room temperature, the interaction of platinum nanoparticles with NO _x hypothetically leads to the dissolution (insertion) of oxygen atoms in the bulk of the particles with the retention of their metallic nature. It was found that dissolved oxygen is much more readily reducible by hydrogen than the lattice oxygen of the platinum oxide particles.     

Unified formula and volume characteristics in comparative crystal chemistry of natural zeolites

Formulas of natural zeolites are generally cumbersome and not easily comparable because of differences in their written form. A summary of the formulas normalized at n=1 is given for aluminosilicate zeolites with the [(Si,Al) _n O_2n ] frameworks. Novel volume parameters are proposed for the framework instead of the framework density (FD) and a zeolite as a whole, which are calculated as the effective volumes of a mean (Si, Al, O) atom and a mean atom of the compound. We show the efficiency of the comparative crystal chemical analysis of zeolites in a common scale with the use of unified characteristics.     

Potential functions of internal rotation in <Emphasis Type="Italic">n</Emphasis>-alkanes and its contribution to thermodynamic properties

The potential functions of braked internal rotation V(?) in n-alkanes (ethane, propane, butane, n-pentane, n-hexane, n-heptane) were calculated by ab initio and DFT methods with the 6-311++G(3df,3pd) basis set. The functions were approximated as a series of six cosines. The dependences of V(?) on the length of the hydrocarbon chain in n-alkanes were analyzed. The heights of the trans-cis and trans-gauche barriers and the differences between the energies of the trans and gauche conformers were calculated and compared with the experimental data. From the calculated geometric parameters and V(?), the contributions of the braked internal rotation to the enthalpy, entropy, heat capacity, and Gibbs free energy at 298 K were determined. The contributions of internal rotations are transferable within the framework of additive approaches. The generalized function V _av(?) for n-alkanes and averaged contributions of internal rotation of the C-C bonds and CH₃- and -CH₂- tops to the thermodynamic properties were suggested.     

Investigation of Euphrasia rostkoviana Hayne Using GC–MS and LC–MS

Gas and liquid chromatography coupled with mass spectrometry was applied to solve difficulties and reinvestigate the serious matrix problems affecting analysis of the active compounds in Euphrasia rostkoviana Hayne. The main groups of compounds were obtained by extracting the herb stepwise with n-hexane, chloroform, ethyl acetate and methanol. Polyamide column chromatography facilitated further separation. Phenolic/flavonoid- and terpenoid-type molecules were studied by GC–MS, HPLC and LC–MS–MS. The β-sitosterol content of the herb was determined by gas chromatography with flame ionisation detection (GC-FID). Caffeic acid, chlorogenic acid, coumaric acid and flavonoid glycosides of apigenin, luteolin, rhamnetine (hexoside), kaempferol (both hexoside and rutinoside) and quercetin (rutinoside) were identified in the fractions of the methanolic extract.     

Facile synthesis of 5A zeolite from attapulgite clay for adsorption of <Emphasis Type="Italic">n</Emphasis>-paraffins

5A zeolites were facilely synthesized from attapulgite clay and sodium aluminate precursors. The optimum synthesis condition for 4A zeolite (Na-form) were H₂O/attapulgite ratio of 40:1 volume/mass, NaOH/attapulgite mass ratio of 2.35:1, the crystallization time was 4 h at 80–85 °C. The 4A zeolite was converted to related 5A zeolite (Ca-form) through ionic exchanges using calcium chloride solution with the Si/Al mole ratio of 1.3. SEM images demonstrated that as-synthesized 5A zeolites are ordered cubic crystals, average crystals length dimension is 1–2 μm. And the zeolites product had a specific surface area of 482 m² g^?1 and total pore volume of 0.274 cm³ g^?1. The static adsorption experiments showed that the equilibrium adsorption capacities of n-decane and n-pentadecane on produced 5A zeolite were 0.253 and 0.510 g g^?1, respectively. And the adsorption equilibrium time of n-decane and n-pentadecane on 5A zeolite were 45 and 60 min, respectively. The experimental adsorption data of n-decane and n-pentadecane on three zeolites could be properly fitted by the Langmuir–Freundlich isotherm model.     

Limiting activity coefficients of hydrocarbons in phenol

Temperature dependence of the limiting activity coefficients of saturated (n-hexane, n-heptane, n-octane, and cyclohexane) and aromatic (benzene, toluene, ethylbenzene, o-xylene) hydrocarbons in phenol was studied in the temperature range 308–348 K by the headspace analysis method.     

Solvent effect of fluorescence on/off switching of diarylethene linked to excited-state intramolecular proton transfer fluorophore

Efficient fluorescence on/off switching of a dyad consisting of a photochromic diarylethene and a fluorescence dye based on excited state intramolecular proton transfer (ESIPT) was designed and demonstrated. Diarylethenes linked to (2-(2-methoxy-5-methylphenyl)benzothiazol-6-yl)- and (2-(2-hydroxy-5-methylphenyl)benzothiazol-6-yl)-9,9-dioctylfluorene moieties (1a and 2a, respectively) exhibited fluorescence on/off switching upon alternating irradiation with ultraviolet and visible light in various solvents. The fluorescence on/off contrast of 2a was found to be higher than that of 1a in n-hexane because the overlap integral between the absorption spectrum of the diarylethene closed-ring form and the fluorescence spectrum of 2a is larger than that of 1a. Diarylethene 2a exhibited green fluorescence with large Stokes shift in n-hexane, which is ascribed to the ESIPT process from the enol form to the keto form. In contrast, the fluorescence of 2a in N,N-dimethylsulfoxide (DMSO) was mainly observed as blue fluorescence from enol form, while diarylethene 1a exhibited blue fluorescence in n-hexane and DMSO. The fluorescence on/off contrast of 2a in n-hexane was higher than that in DMSO because of the difference in the spectral overlaps in n-hexane and DMSO.     

Kinetics and Mechanism of the Oxidative Conversion of <Emphasis Type="Italic">n</Emphasis>-Amyl Alcohol to Valeric Acid on a Modified Zeolite Catalyst

The catalytic activity of natural and synthetic mordenites modified with Cu²⁺, Zn²⁺, and Pd²⁺ cations via ion exchange was studied in the oxidative conversion of n-amyl alcohol to valeric acid under the action of oxygen. It is established that the highest activity and selectivity in this reaction is exhibited by mordenite hydrothermally synthesized from kaolinite and containing 3.0 wt % Cu²⁺, 0.1 wt % Pd²⁺, and 2.0 wt % Zn²⁺. The kinetics of this catalytic reaction is studied. Based on the experimental data, a possible stepwise mechanism is proposed, and a theoretically grounded kinetic model of the process is developed.     

Synthesis and adsorption and luminescence properties of hydrophobic silver nanoparticles in the presence of pyrene

A procedure was developed for the synthesis of hydrophobic silver nanoparticles with an average size of 4 nm in two-phase water-organic emulsions. The physical properties of the obtained silver organosol were studied by molecular spectroscopy and electron microscopy. It was found that the synthesized silver nanoparticles had a specific surface of 60–110 m²/g. It was shown that chemically modified silver nanoparticles can be used as an adsorbent for preconcentrating polycyclic aromatic hydrocarbons (using pyrene as an example) from dilute n-hexane solutions followed by luminescence determination at room temperature.     

Radiation-Induced Heterogeneous Processes of Water Decomposition in the Presence of Mixtures of Silica and Zirconia Nanoparticles

The radiation-induced heterogeneous processes of water decomposition on mixtures of silicon dioxide (n-SiO₂) and zirconium dioxide (n-ZrO₂) nanoparticles have been studied. The kinetics of buildup of molecular hydrogen in the radiolytic processes of water decomposition in the test systems has been examined. The reaction rates and the radiation-chemical yield of hydrogen in the radiolysis of water in the presence of n-SiO₂–n-ZrO₂ mixtures with different ratios between the components have been determined. It has been found that the rates and radiation-chemical yields decreased on going from n-ZrO₂ to n-SiO₂. The individual components (n-SiO₂ and n-ZrO₂) and the mixtures of n-SiO₂–n-ZrO₂ and n-SiO₂–n-ZrO₂ + H₂O before and after γ-irradiation have been examined by Fourier-transform IR spectroscopy in order to reveal interactions between the components and to study the mechanism of radiolytic processes. It has been found that the adsorption of water in the test systems occurs via both molecular and dissociative mechanisms. It has been shown that there is no noticeable interaction between the components of the oxide nanoparticles under the conditions of the experiments.     

Compositions and structures of nanoparticles of trigonal symmetry <Emphasis Type="Italic">D</Emphasis><Subscript>3<Emphasis Type="Italic">d</Emphasis></Subscript>: Nanotubes

A method has been developed for the determination of the structure and number of atoms in the shells of nanoparticles as a function of the arrangement of atoms at the symmetry elements of a symmetry group. The formulas for calculation of the number of particles of symmetry D _3d have been reported. It has been shown that the number of atoms in trigonal shells is determined by three structurally invariant numbers and the quantum number of the group order n. All possible nanostructures of symmetry D _3d have been classified: C_{θ + 6z} , z = 0, 1, 2, ..., where the basic shells are C_θ = C₆, C₈, and C₁₄. A sum rule has been obtained for the coordination numbers of the shell sites located on symmetry axes. Trigonal nanoparticles are parent ones for obtaining (3,0), (6,0), and (9,0) nanotubes of trigonal type. The general formulas of these nanotubes with icosahedral, dodecahedral, and cubic caps are N_{8 + 12p} , N_{20 + 24p} , and N_{60 + 36p} (p = 1, 2, ...), respectively. The graphical constructions of all classes of trigonal nanoparticles and nanotubes are reported.     

Catalytic properties of platinum-promoted acid cesium salts of molybdophosphoric and molybdovanadophosphoric heteropoly acids in the gas-phase oxidation of benzene to phenol with an O<Subscript>2</Subscript> + H<Subscript>2</Subscript> mixture

Acid salts Cs _x H_{3 + n ? x} PMo_{12 ? n} V _n O₄₀ (n = 0, 1, 2, or 3; x = 2.5 or 3.5) with coprecipitated or supported platinum were studied using thermogravimetry, IR spectroscopy, and temperature-programmed reduction. The thermal region of the full stability of these salts is limited by the decomposition temperature of the corresponding acid H₃PMo₁₂O₄₀ (～400°C) or H_{3 + n} PMo_{12 ? n} V _n O₄₀ (～300–350°C). The degree of reduction of heteropoly anions with hydrogen is regulated by temperature. Deeply reduced heteropoly anions (at 300°C) are slowly oxidized with oxygen with structure and composition regeneration. The states of molybdenum and vanadium on the surface of samples with coprecipitated platinum Pt_0.1-Cs_2.5H_0.5PMo₁₂O₄₀ (1) and Pt_0.1-Cs_2.5H_2.5PMo₁₀V₂O₄₀ (2), which were studied using XPS, correspond to reduced or reoxidized heteropoly anions in the bulk. Platinum metal particles of ～5 nm in size were observed in high-resolution TEM images obtained after the reduction and storage of sample 1 in air. A heteropoly compound forms two texture levels: spherical nanoparticles of 10–20 nm in size are collected in closely packed globules of 100–300 nm in size. Detailed texture studies, which were performed using nitrogen adsorption isotherms, demonstrated texture mobility under the ambient conditions. The cesium salts of the heteropoly acids were tested in the gas-phase oxidation of benzene to phenol with an O₂ + H₂ mixture at 180°. The effect of platinum concentration on the specific catalytic activity in the presence of deeply reduced heteropoly anions was monitored. The samples containing the salt Cs_2.5H_0.5PMo₁₂O₄₀ exhibited the highest activity in the formation of phenol. The introduction of vanadium into the heteropoly anion impaired the catalytic performance of both deeply and slightly reduced samples.     

Nonoxidative conversion of methane and <Emphasis Type="Italic">n</Emphasis>-pentane over a platinum/alumina catalyst

Methane adsorption on the Pt–H/Al₂O₃ and Pt/Al₂O₃ catalysts begins at Т = 475°C and is accompanied by the appearance of hydrogen in the reaction medium. At a higher temperature is raised to 550°C, the amount of adsorbed hydrogen increases to 1.1 and 0.8 mol/(mol Pt), respectively. According to the calculated degree of methane dehydrogenation on platinum sites at Т = 550°C, the Н/C ratio is 1.3 (at/at) for the Pt–H/Al₂O₃ catalyst and 1.5 (at/at) for the Pt/Al₂O₃ catalyst. The introduction of n-pentane into the reaction medium increases the yield of aromatic hydrocarbons (benzene and toluene) by a factor of 8.8 over the arene yield observed in individual n-pentane conversion. A mass spectrometric analysis of the arenes obtained with the Pt/Al₂O₃ catalyst has demonstrated that 37.5% of the adsorbed methane is involved in the methane–n-pentane coaromatization yielding benzene and toluene.