Electrical transport characteristics of ZnO–Bi2O3–B2O3 glasses

Optically clear glasses in the ZnO–Bi₂O₃–B₂O₃ (ZBBO) system were fabricated via the conventional melt-quenching technique. Dielectric constant and loss measurements carried out on ZBBO glasses unraveled nearly frequency (1 kHz–10 MHz)-independent dielectric characteristics associated with significantly low loss (D?=?0.004). However, weak temperature response was found with temperature coefficient of dielectric constant 18?±?4 ppm °C^?1 in the 35–250 °C temperature range. The conduction and relaxation phenomena were rationalized using universal AC conductivity power law and modulus formalism respectively. The activation energy for relaxation determined using imaginary parts of modulus peaks was 2.54 eV which was close to that of the DC conduction implying the involvement of similar energy barriers in both the processes. Stretched and power exponents were temperature dependent. The relaxation and conduction in these glasses were attributed to the hoping and migration of Bi³⁺ cations in their own and different local environment.     

YAG laser-induced β-BaB2O4 crystalline dot formation in Sm2O3–BaO–B2O3 glasses

A continuous-wave (CW) YAG laser (power: 0.75–0.9 J/s, irradiation time: 15 s–15 min) with a wavelength of 1064 nm is irradiated to 11.1Sm₂O₃·44.4BaO·44.4B₂O₃ glass, and the formation of β-BaB₂O₄ (β-BBO) crystalline dots with a diameter of 30–150 μm is confirmed from micro-Raman spectra. β-BBO crystals with around 200 μm length grow towards the interior of the glass. The incorporation of Sm³⁺ into β-BBO crystalline dots is suggested from micro-Raman and fluorescence spectra. The second harmonic generation is detected from the array (10×10=100 dots) of β-BBO crystalline dots, indicating that each crystalline dot formed by YAG laser irradiation is a nonlinear optical crystal. CW YAG laser irradiation to glass with Sm³⁺ ions is a nice technique for a spatially controlled crystal growth.     

Spectroscopic studies on Li2O–MgO–Bi2O3–B2O3 glasses

MgO-Li₂O-Bi₂O₃-B₂O₃ glasses were prepared by melt quench technique and analyzed with the help of refractive index, optical, IR, and Raman spectroscopy studies. The present glasses exhibited the mixed modifier effect (MME) through refractive index change non-linearly. The variation in the indirect optical band gap and band tailing in MgO content have been discussed with the glass structure. Based on the obtained values of α_o2-, optical basicity, and interaction parameters, the present glasses were termed as very semi covalent acidic oxide glasses. Raman and Infrared spectra reveal that these glasses are built up of BO₃, BO₄ units of B₂O₃ and octahedral [BiO₆], pyramidal [BiO₃] units of Bi₂O₃ were observed.     

Optical and IR study of Li2O–CuO–P2O5 glasses

Infrared (IR) and UV spectra of ternary Li₂O–CuO–P₂O₅ glasses in two series Li₂O(65−X)%–CuO(X%)–P₂O₅(35%), X = 20, 30, 40 and Li₂O(55−X)%–CuO(X%)–P₂O₅(45%), X = (10, 20, 30) were studied. Infrared (IR) investigations showed the metaphosphate and pyrophosphate structures and with increase of CuO content in metaphosphate glass, the skeleton of metaphosphate chains is gradually broken into short phosphate groups such as pyrophosphate. IR spectra showed one band at about 1,220 and 1,260 cm⁻¹ for P₂O₅(35%) and P₂O₅(45%) series, respectively, assigned to P=O bonds. For CuO additions ≤20 mol%, the glasses exhibit two bands in the frequency range 780–720 cm⁻¹ which are attributed to the presence of two P–O–P bridges in metaphosphate chain. But for CuO addition ≥30 mol%, the glasses exhibit only a single band at 760 cm⁻¹ which is assigned to the P–O–P linkage in pyrophosphate group. In optical investigations, absorption coefficient versus photon energy showed three regions: low energy side, Urbach absorption, and high energy side. In Urbach’s region, absorption coefficient depends exponentially on the photon energy. At high energy region, optical gap was calculated and investigations showed indirect transition in compounds and decreases in optical gap with increases of copper oxides contents that is because of electronic transitions and increasing of nonbridging oxygen content.     

Spectral dispersion of linear optical properties for Sm2O3 doped B2O3–PbO–Al2O3 glasses

Glasses having composition (B₂O₃)₂₅ (PbO)₇₀ (Al₂O₃)₅ (Sm₂O₃)_x ,where x=0, 0.5, 1, 2, 3 and 5 g were prepared using the normal melt quench technique. Spectral reflectance and transmittance at normal incidence of the glass samples are recorded with a spectrophotometer in the spectral range 220–2200 nm. These measured values are introduced into analytical expressions to calculate the real and imaginary parts of the refractive indices. Wemple–DiDomenico single oscillator model and one-term Sellmeier dispersion relations are used to model the real refractive indices. Dispersion parameters such as: single oscillator energy, dispersion energy, lattice oscillating strength, average oscillator wavelength, average oscillator strength and Abbe's number are deduced and compared. Absorption dispersion parameters such as: Fermi energy, optical energy gap for direct and indirect transitions, Urbach energy and steepness parameter are calculated. Effects of doping Sm₂O₃ on these linear optical parameters are investigated and interpreted.     

Optical properties of glasses in the Li2O–MoO3–P2O5 system

Glasses xLi₂O–(50-x)(MoO₃)₂–50P₂O₅ with x = 10, 20, 30, and 40 mol% were prepared and their optical and electrical properties were investigated. Analysis of the IR spectra revealed that the Li⁺ ions act as a glass modifier that enter the glass network by breaking up other linkages and creating non-bridging oxygens in the network. The optical absorption edge of the glasses was measured for specimens in the form of thin blown films and the optical absorption spectra of those were recorded in the range 200–800 nm. From the optical absorption edges studies, the optical band gap (E _opt) and the Urbach energy (E _e) values have been evaluated by following the available semi-empirical theories. The linear variation of (αhν)^1/2 with hν, is taken as evidence of indirect interband transitions. The E _opt values were found to decrease with increasing Li₂O content by causing increase in the number of non-bridging oxygens in network. The Urbach tail analysis gives the width of localized states between 0.48 and 0.74 eV.     

Electrical properties of V2O5B2O3 glasses

Binary semiconducting glasses of xV₂O₅·(1−x)B₂O₃ system with x ranging from 0.6 to 0.9 have been investigated to elucidate their electronic conduction. The values of conductivity and activation energy of these glasses are in good agreement with previous results on most V₂O₅-based glasses. Arguments for the small-polaron as the charge carrier in V₂O₅B₂O₃ glasses are presented.     

Preparation,heat treatment and photoluminescence properties of V-doped ZnO–SiO2–B2O3 glasses

Four glasses in ZnO–SiO₂–B₂O₃ ternary system were prepared by the melt quenching method with the objective of optimizing sub-nanosecond emission over the UV region of zinc borosilicate glasses used in superfast scintillators. The effect of vanadium addition and heat treatment on phase formation, microstructure and photoluminescence properties of the glasses was characterized by means of DTA, XRD, SEM and fluorescence spectrophotometer. Vanadium contributed to the near-band-edge emission in two ways, by introducing donor levels in the energy band of ZnO particles and by facilitating the precipitation of ZnO and willemite crystals. Furthermore, nucleation of willemite and zinc oxide phases, which are both the origins of the intense emission bands in the UV region, was facilitated with increasing either the time or temperature of heat treatments. Photoluminescence spectra showed the elimination of the visible emission band which is favorable in scintillating glasses.     

Thermal analysis and infrared study of Nb2O5–TeO2 glasses

Tellurite glasses of the xNb₂O₅–(100–x) TeO₂, (3 ≤ x ≤ 20 mol%) system have been prepared and studied by IR spectroscopy and differential thermal analysis to explore the role of Nb₂O₅ on their structure. IR analysis indicates that NbO₆ transforms TeO₄ units into tellurite structural TeO₃ units, with a shift of lattice vibrations towards higher wavenumbers. The stretching force constant of the tellurite structural units increases with Nb₂O₅ content, a feature that is attributed to the higher bond strength and higher coordination number of Nb₂O₅ relative to TeO₂. The crystallization kinetics has been studied under non-isothermal conditions using the formal theory of transformations for heterogeneous nucleation. The crystallization results are analyzed, and both the activation energy of the crystallization process and the crystallization mechanism are characterized. The thermal stability of these glasses are characterized in terms of characteristic temperatures, such as the glass-transition temperature, T _g, the temperature of onset of crystallization, T _in, the temperature corresponding to the maximum crystallization rate, T _p, and two kinetic parameters, K(T _g) and K(T _p). The results reveal that thermal stability increases with increasing Nb₂O₅ content. XRD diffraction of the studied glasses indicates the presence of microcrystallites of α-tellurite, γ-telluride, Nb₂Te₄O₁₃ and an amorphous matrix.     

Activation energy and conductivity of glasses in the P2O5–V2O5–Li2O system

The conductivity of glasses in the 50\textP_\text2 \textO_\text5 - x\textV_\text2 \textO_\text5 - ( 50 - x )\textLi_\text2 \textO50{\text{P}}_{\text{2}} {\text{O}}_{\text{5}} - x{\text{V}}_{\text{2}} {\text{O}}_{\text{5}} - \left( {50 - x} \right){\text{Li}}_{\text{2}} {\text{O}} system was studied as a function of temperature and composition. For all compositions, the conductivity variation as a function of temperature followed an Arrhenius type relationship. Isothermal variation of conductivity as a function of composition showed a minimum for a molar ratio x near 20. Probable mechanisms for decrease of conductivity with decrease of vanadium oxide concentration were explained. The minimum in room temperature was attributed to increase of V⁴⁺/V⁵⁺ with decrease of vanadium oxide in specific concentrations of vanadium oxide. Activation energy increased with decrease of V₂O₅ content. This behavior was attributed to increase of average spacing between vanadium ions.     

Spectroscopic characterization of Tm3+:TeO2–K2O–Nb2O5 glasses for 2-μm lasing applications

We have performed detailed experiments to investigate the spectroscopic properties of a new type of tellurite based host doped with thulium: Tm₂O₃:(0.70)TeO₂–(0.15)K₂O–(0.15)Nb₂O₅ having Tm₂O₃ concentrations of 0.125, 0.25, 0.5, and 1.0 mol%. By performing a Judd–Ofelt analysis of the absorption bands, we obtained average radiative lifetimes of 2.57±0.20 and 0.35±0.01 ms for the ³H₄ and ³F₄ levels, respectively. Furthermore, we also observed that an increase in the Tm₂O₃ concentration from 0.125 to 1.0 mol% results in a decrease of the measured fluorescence lifetime from 814 to 439 μs and from 258 to 47 μs for the ³H₄ and ³F₄ levels, respectively, due to efficient non-radiative decay. The highest quantum efficiency of 32% was obtained for the sample doped with 0.125 mol% Tm₂O₃ for the ³H₄ level. Results show that cross relaxation becomes important as the ion concentration is increased, leading to the quenching of the 1460-nm band and enhancement of the 1860-nm emission. The highest emission cross section of 6.85×10^?21 cm² measured for the 1860-nm band reveals the potential of this host for the development of 2-μm lasers in bulk glass as well as fiber media.     

Real-time phase-shift ing techniques for determining the photoelastic parameters: a theoretical comparison

Among data acquisition techniques in digital photoelasticity, the integrated phase shifting technique (IPST) can real-time analyze the photoelastic parameters at a video rate of the high speed CCD camera. In this paper, fourteen algorithms are described by different configurations of the rotating an analyzer at a constant rate and an output quarter-wave plate at another constant rate. The theoretical comparisons of the algorithms are given by the simulated phase distributions of the isochromatic and isoclinic parameters of the disk under two cases that the load keeps unchangeable or linearly increasing in exposure time of the camera. Then a guideline is given to alleviate the influence of the load changing with time on the IPST.     

Mixed cationic effect in the Li/AgB2O3P2O5 glasses

Electrical conductivity data have been determined for a series of x Ag₂O(1 − x)Li₂OB₂O₃P₂O₅ glasses. The progressive substitution of Li⁺ by Ag⁺ considerably decreases the ionic conductivity which shows a minimum at Ag/(Ag + Li) = 0.4. This behaviour becomes intense as the temperature is lowered. This mixed cationic effect is further characterised by activation energy and conductivity relaxation time going to a maxima where conductivity minima occurs. ac conductivity and electric modulus response of those glasses are discussed.     

Broadband 1.5-μm emission of high erbium-doped Bi2O3–B2O3–Ga2O3 glasses

High Erbium-doped glass showing the wider 1.5-μm emission band is reported in the Bi₂O₃–B₂O₃–Ga₂O₃ system and its thermal stability and optical properties such as absorption, emission spectra, absorption and stimulated emission cross-sections and fluorescence lifetime are investigated. Compared with other glass hosts, the gain bandwidth properties of high Er³⁺ content in BBG glass are better than those of tellurite, germanate, silicate and phosphate glasses. The broad and flat ⁴I_13/2→⁴I_15/2 emission and the larger stimulated emission cross-section of Er³⁺ ions around 1.5 μm enable it to be used as a host material for potential broadband optical amplifiers at C and L bands in the microchip configuration.     

Synthesis and properties of MoO3–V2O5–PbO glasses

Lead vanadate glasses of the system xMoO₃–50V₂O₅–(50-x)PbO (0 ≤ x ≤ 25 mol. %) were synthesized and studied by FTIR and ultrasonic spectroscopy and differential scanning calorimetry to investigate the role of MoO₃ content on their atomic structure. The elastic properties and Debye temperatures of the glasses were investigated using sound velocity measurements at 4 MHz. The activation energy for the glass transition was derived from the dependence of the glass-transition temperature (T_g ) on the heating rate. Similarly, the activation energy of the crystallization process was also determined. According to the IR analysis, the vibrations of the vanadate structural units are shifted towards higher wavenumbers on the formation of bridging oxygens. The change of density and molar volume with MoO₃ content reveals that the molybdinate units are less dense than the lead oxide units. The observed compositional dependence of the elastic moduli is interpreted in terms of the effect of MoO₃ on the coordination number of the vanadate units. A good correlation was observed between the experimentally determined elastic moduli and those computed according to the Makishima–Mackenzie model. It is assumed that MoO₃ plays the role of a glass former by increasing the activation energy for the glass transition and the activation energy for crystallization and by increasing both the thermal stability and the glass formation range of the vanadate glasses.     

Effect of B2O3 on the structure and properties of tungsten–tellurite glasses

The elastic properties and Debye temperatures of xB₂O₃–70TeO₂–(30–x)WO₃, (0 ≤ x ≤ 30 mol%) glasses have been investigated using sound velocity measurements at 4 MHz. Ultrasonic and thermal parameters, combined with the results of IR spectroscopic analyses, were employed to explore the effect of B₂O₃ on the structure of tungsten–tellurite glasses. According to IR analysis, there is competition between WO₆ and TeO₄ units to form BO₄ units, and the vibrations of the tellurite structural units are shifted towards lower wavenumbers on the formation of non-bridging oxygens. It is assumed that B₂O₃ acts as a modifier by decreasing the glass-transition temperature T _g and increasing both the thermal stability and glass formation range of the tellurite glasses. The change in density and molar volume with B₂O₃ content reveals that the borate units are less dense than the tellurite structural units. The observed compositional dependence of elastic moduli is interpreted in terms of the effect of B₂O₃ on the coordination number of the tellurite units. A good correlation was observed between experimentally determined elastic moduli and those computed with the Makishima–Mackenzie model.     

Luminescence and energy transfer in La2O3–Nb2O5–B2O3:M3+ (M=Bi,Eu, Dy) glasses

The luminescence and energy transfer processes in La₂O₃–Nb₂O₅–B₂O₃:M³⁺ (M=Bi, Eu, Dy) glasses were investigated using luminescence spectroscopy (excitation and emission, down to 4.2 K) and decay time measurements at room temperature. The observation of niobate luminescence implies a considerable degree of short- and intermediate-range order in these glasses. Energy transfer from the niobate groups to the lanthanide ions was observed for Eu³⁺, but not for Dy³⁺, suggesting that the energy transfer process occurs to the charge-transfer state of the Eu³⁺ ion, rather than to its f-levels. Inter-Eu³⁺ energy transfer was negligible in the concentration range investigated (up to 3 mol%). In contrast, cross-relaxation processes between Dy³⁺ ions were active at concentrations as low as 0.5 mol%. In the Bi³⁺ doped glasses the energy transfer was observed from the Bi³⁺ excited levels to the oxygen deficient niobate groups.