Is it true dioxygenase or classic autoxidation catalysis? Re-investigation of a claimed dioxygenase catalyst based on a Ru(2)-incorporated, polyoxometalate precatalyst

A 1997 Nature paper reported that a novel Ru(2)-incorporated sandwich-type polyoxometalate, {[WZnRu(III)(2)(OH)(H(2)O)](ZnW(9)O(34))(2)}(11)(-), is an all-inorganic dioxygenase catalyst for the hydroxylation of adamantane and the epoxidation of alkenes using molecular oxygen. Specifically, it was reported that the above Ru(2)-containing polyoxometalate catalyzes the following reaction by a non-radical-chain, dioxygenase mechanism: 2RH + O(2) --> 2ROH (R = adamantane). A re-investigation of the above claim has been performed, resulting in the following findings: (1) iodometric analysis detects trace peroxides (0.5% relative to adamantane), the products of free-radical-chain autoxidation, at the end of the adamantane hydroxylation reaction; (2) a non-dioxygenase product, H(2)(18)O, is observed at the end of an adamantane hydroxylation reaction performed using (18)O(2); (3) kinetic studies reveal a fractional rate law consistent with a classic radical-chain reaction; (4) a non-dioxygenase approximately 1:1 adamantane products/O(2) stoichiometry is observed in our hands (instead of the claimed 2:1 adamantane/O(2) dioxygenase stoichiometry); (5) adamantane hydroxylation is initiated by the free radical initiator, AIBN (2,2'-azobisisobutyronitrile), or the organic hydroperoxide, t-BuOOH; (6) four radical scavengers completely inhibit the reaction; and (7) {[WZnRu(III)(2)(OH)(H(2)O)](ZnW(9)O(34))(2)}(11)(-) is found to be an effective catalyst for cyclohexene free-radical-chain autoxidation. The above results are consistent with and strongly supportive of a free-radical-chain mechanism, not the previously claimed dioxygenase pathway.     

Weak interactions modulating the dimensionality in supramolecular architectures in three new nickel(II)-hydrazone complexes, magnetostructural correlation, and catalytic potential for epoxidation of alkenes under phase transfer conditions

Three different ONO donor acetyl hydrazone Schiff bases have been synthesized from the condensation of acetic hydrazide with three different carbonyl compounds: salicylaldehyde (HL(1)), 2-hydroxyacetophenone (HL(2)), and 2, 3-dihydroxybenzaldehyde (HL(3)). These tridentate ligands are reacted with Ni(OOCCF(3))(2)·xH(2)O to yield three new Ni(II) complexes having distorted octahedral geometry at each Ni center: [Ni(L(1))(OOCCF(3))(CH(3)OH)](2) (1), [Ni(L(2))(OOCCF(3))(H(2)O)](2) (2), and [Ni(L(3))(L(3)H)](OOCCF(3))(H(2)O)(1.65)(CH(3)OH)(0.35) (3). The ligands and the complexes have been characterized by elemental analysis and IR and UV-vis spectroscopy, and the structures of the complexes have been established by single crystal X-ray diffraction (XRD) study. 1 and 2 are centrosymmetric dinuclear complexes and are structural isomers whereas 3 is a bis chelated cationic monomer coordinated by one neutral and one monoanionic ligand. O-H···O hydrogen bonds in 3 lead to the formation of a dimer. Slight steric and electronic modifications in the ligand backbone provoke differences in the supramolecular architectures of the complexes, leading to a variety of one, two, and three-dimensional hydrogen bonded networks in complexes 1-3 respectively. Variable temperature magnetic susceptibility measurements reveal that moderate antiferromagnetic interactions operate between phenoxo bridged Ni(II) dimers in 1 and 2 whereas very weak antiferromagnetic exchange occurs through hydrogen bonding and π-π stacking interactions in 3. All complexes are proved to be efficient catalysts for the epoxidation of alkenes by NaOCl under phase transfer condition. The efficiency of alkene epoxidation is dramatically enhanced by lowering the pH, and the reactions are supposed to involve high valent Ni(III)-OCl or Ni(III)-O· intermediates. 3 is the best epoxidation catalyst among the three complexes with 99% conversion and very high turnover number (TON, 396).     

New insights into the mechanism of oxodiperoxomolybdenum catalysed olefin epoxidation and the crystal structures of several oxo-peroxo molybdenum complexes

[Mo(O)(O(2))(2)(L)(2)] compounds (L = pz, pyrazole; dmpz, 3,5-dimethylpyrazole) were reacted stoichiometrically, in the absence of an oxidant, with cis-cyclooctene in an ionic liquid medium where selective formation of the corresponding epoxide was observed. However, this oxo-transfer reaction was not observed for some other olefins, suggesting that alternative reaction pathways exist for these epoxidation processes. Subsequently, DFT studies investigating the oxodiperoxomolybdenum catalysed epoxidation model reaction for ethylene with hydrogen peroxide oxidant were performed. The well known Sharpless mechanism was first analysed for the [Mo(O)(O(2))(2)(dmpz)(2)] model catalyst and a low energy reaction pathway was found, which fits well with the observed experimental results for cis-cyclooctene. The structural parameters of the computed dioxoperoxo intermediate [Mo(O)(2)(O(2))(dmpz)(2)] in the Sharpless mechanism compare well with those found for the same moiety within the [Mo(4)O(16)(dmpz)(6)] complex, for which the full X-ray report is presented here. A second mechanism for the model epoxidation reaction was theoretically investigated in order to clarify why some olefins, which do not react stoichiometrically in the absence of an oxidant, showed low level conversions in catalytic conditions. A Thiel-type mechanism, in which the oxidant activation occurs prior to the oxo-transfer step, was considered. The olefin attack of the hydroperoxide ligand formed upon activation of hydrogen peroxide with the [Mo(O)(O(2))(2)(dmpz)(2)] model catalyst was not possible to model. The presence of two dmpz ligands coordinated to the molybdenum centre prevented the olefin attack for steric reasons. However, a low energy reaction pathway was identified for the [Mo(O)(O(2))(2)(dmpz)] catalyst, which can be formed from [Mo(O)(2)(O(2))(dmpz)(2)] by ligand dissociation. Both mechanisms, Sharpless- and Thiel-type, were found to display comparable energy barriers and both are accessible alternative pathways in the oxodiperoxomolybdenum catalysed olefin epoxidation. Additionally, the molecular structures of [Mo(O)(O(2))(2)(H(2)O)(pz)] and [Hdmpz](4)[Mo(8)O(22)(O(2))(4)(dmpz)(2)]·2H(2)O and the full X-ray report of [Mo(O)(O(2))(2)(pz)(2)] are also presented.     

A new chiral diiron catalyst for enantioselective epoxidation

The dinuclear chiral complex Fe(2)O(bisPB)(4)(X)(2)(ClO(4))(4) (X = H(2)O or CH(3)CN) catalyzes with high efficiency (up to 850 TON) and moderate enantioselectivity (63%) the epoxidation of electron deficient alkenes at 0 degrees C by a peracid.     

A homogeneous gallium(III) compound selectively catalyzes the epoxidation of alkenes

We demonstrate that a simple gallium(III) complex, [Ga(phen)(2)Cl(2)]Cl (phen = 1,10-phenanthroline), can serve as a homogeneous catalyst for the epoxidation of alkenes. The olefin epoxidations proceed relatively quickly at mild temperatures and, under optimum conditions, are highly selective for the epoxide product.     

Polyoxometalate catalysts: toward the development of green H2O2-based epoxidation systems

This paper describes the development of green, efficient H(2)O(2)-based epoxidation systems with three kinds of polyoxometalates: (i) a dinuclear peroxotungstate [W(2)O(3)(O(2))(4)(H(2)O)(2)](2-) (I), (ii) a divacant lacunary polyoxotungstate [gamma-SiW(10)O(34)(H(2)O)(2)]4 (II), (iii) and a divanadium-substituted polyoxotungstate [gamma-1,2-H(2)SiV(2)W(10)O(40)](4-) (III). The highly chemo-, regio-, and diastereoselective epoxidation of various allylic alcohols with only 1 equiv H(2)O(2) in water can be efficiently catalyzed by potassium salt of I (K-I). The catalyst K-I can be recycled with the retention of the catalytic performance. Protonation of a divacant lacunary polyoxotungstate [gamma-SiW(10)O(36)](8-) gives [gamma-SiW(10)O(34)(H(2)O)(2)](4-) (II) with two aquo ligands. The tetra-n-butylammonium salt of II (TBA-II) catalyzes epoxidation of common olefins including propylene with >or=99% selectivity to epoxide and >or=99% efficiency of H(2)O(2) utilization. The bis(mu-hydroxo)bridged dioxovanadium site in [gamma-1,2-H(2)SiV(2)W(10)O(40)](4-) (III) can also efficiently catalyze epoxidation of a variety of olefins with 1 equiv H(2)O(2). Notably, the system with III shows unique stereospecificity, diastereoselectivity, and regioselectivity for the epoxidation of cis/trans olefins, 3-substituted cyclohexenes, and nonconjugated dienes, respectively, which are quite different from those reported for epoxidation systems up to now. Furthermore, the heterogenization of the mentioned polyoxometalates can be achieved by using ionic liquid-modified SiO(2) as a support without loss of catalytic performance.     

Reactions of trivacant Wells-Dawson heteropolytungstates. Ionic strength and Jahn-Teller effects on formation in multi-iron complexes

Reaction of alpha-P(2)W(15)O(56)(12-) and Fe(III) in a saturated NaCl solution produces a trisubstituted Wells-Dawson structure with three low-valent metals, alpha-(Fe(III)Cl)(2)(Fe(III)OH(2))P(2)W(15)O(59)(11-) (1). Dissolution of this species into 1 M NaBr (Br(-) is non-coordinating) gives the triaquated species alpha-(Fe(III)OH(2))(3)P(2)W(15)O(59)(9-) (2). Ionic strength values of 1 M or greater are necessary to avoid decomposition of 1 or 2 to the conventional sandwich-type complex, alpha beta beta alpha-(Fe(III)OH(2))(2)Fe(III)(2)(P(2)W(15)O(56))(2)(12-) (3). If the pH is greater than 5, a new triferric sandwich, alpha alpha beta alpha-(NaOH(2))(Fe(III)OH(2))Fe(III)(2)(P(2)W(15)O(56))(2)(14-) (4), forms rather than 3. Like the previously reported Wells-Dawson-derived sandwich-type structures with three metals in the central unit ([TM(II)Fe(III)(2)(P(2)W(15)O(56))(P(2)TM(II)(2)W(13)O(52))],(16-) TM = Cu, Co), this complex has a central alpha-junction and a central beta-junction. Thermal studies suggest that 4 is more stable than 3 over a wide range of temperatures and pH values. The intrinsic Jahn-Teller distortion of d-electron-containing metal ions incorporated into the external sites of the central multi-metal unit impacts the stoichiometry of their incorporation (with a consequent change in the inter-POM-unit connectivity, where POM = polyoxometalate). Reaction of non-distorting Ni(II) with the diferric lacunary sandwich-type POM alpha alpha alpha alpha-(NaOH(2))(2)Fe(III)(2)(P(2)W(15)O(56))(2)(16-) (5) produces alpha beta beta alpha-(Ni(II)OH(2))(2)Fe(III)(2)(P(2)W(15)O(56))(2)(14-) (6), a Wells-Dawson sandwich-type structure with two Ni(II) and two Fe(III) in the central unit. All structures are characterized by (31)P NMR, IR, UV-vis, magnetic susceptibility, and X-ray crystallography. Complexes 4 and 6 are highly selective and effective catalysts for the H(2)O(2)-based epoxidation of alkenes.     

Chiral hydroperoxides as oxygen source in the catalytic stereoselective epoxidation of allylic alcohols by sandwich-type polyoxometalates: control of enantioselectivity through a metal-coordinated template

The epoxidation of allylic alcohols is shown to be efficiently and selectively catalyzed by the oxidatively resistant sandwich-type polyoxometalates, POMs, namely [WZnM(2)(ZnW(9)O(34))(2)](q)(-) [M = OV(IV), Mn(II), Ru(III), Fe(III), Pd(II), Pt(II), Zn(II); q = 10-12], with organic hydroperoxides as oxygen source. Conspicuous is the fact that the nature of the transition metal M in the central ring of polyoxometalate affects significantly the reactivity, chemoselectivity, regioselectivity, and stereoselectivity of the allylic alcohol epoxidation. For the first time, it is demonstrated that the oxovanadium(IV)-substituted POM, namely [ZnW(VO)(2)(ZnW(9)O(34))(2)](12-), is a highly chemoselective, regioselective, and also stereoselective catalyst for the clean epoxidation of allylic alcohols. A high enantioselectivity (er values up to 95:5) has been achieved with [ZnW(VO)(2)(ZnW(9)O(34))(2)](12)(-) and the sterically demanding TADOOL-derived hydroperoxide TADOOH as regenerative chiral oxygen source. Thus, a POM-catalyzed asymmetric epoxidation of excellent catalytic efficiency (up to 42 000 TON) has been made available for the development of sustainable oxidation processes. The high reactivity and selectivity of this unprecedented oxygen-transfer process are mechanistically rationalized in terms of a peroxy-type vanadium(V) template.     

Olefin epoxidation with hydrogen peroxide catalyzed by lacunary polyoxometalate [gamma-SiW10O34H2O2]4-

The tetra-n-butylammonium (TBA) salt of the divacant Keggin-type polyoxometalate [TBA](4)[gamma-SiW(10)O(34)(H(2)O)(2)] (I) catalyzes the oxygen-transfer reactions of olefins, allylic alcohols, and sulfides with 30 % aqueous hydrogen peroxide. The negative Hammett rho(+) (-0.99) for the competitive oxidation of p-substituted styrenes and the low value of (nucleophilic oxidation)/(total oxidation), X(SO)=0.04, for I-catalyzed oxidation of thianthrene 5-oxide (SSO) reveals that a strongly electrophilic oxidant species is formed on I. The preferential formation of trans-epoxide during epoxidation of 3-methyl-1-cyclohexene demonstrates the steric constraints of the active site of I. The I-catalyzed epoxidation proceeds with an induction period that disappears upon treatment of I with hydrogen peroxide. (29)Si and (183)W NMR spectroscopy and CSI mass spectrometry show that reaction of I with excess hydrogen peroxide leads to fast formation of a diperoxo species, [TBA](4)[gamma-SiW(10)O(32)(O(2))(2)] (II), with retention of a gamma-Keggin type structure. Whereas the isolated compound II is inactive for stoichiometric epoxidation of cyclooctene, epoxidation with II does proceed in the presence of hydrogen peroxide. The reaction of II with hydrogen peroxide would form a reactive species (III), and this step corresponds to the induction period observed in the catalytic epoxidation. The steric and electronic characters of III are the same as those for the catalytic epoxidation by I. Kinetic, spectroscopic, and mechanistic investigations show that the present epoxidation proceeds via III.     

Monomeric, trimeric, and tetrameric transition metal complexes (Mn, Fe, Co) containing N,N-bis(2-pyridylmethyl)-2-aminoethanol/-ate: preparation, crystal structure, molecular magnetism and oxidation catalysis

The reaction of N,N-bis(2-pyridylmethyl)-2-aminoethanol (bpaeOH), NaSCN/NaN(3), and metal (M) ions [M = Mn(II), Fe(II/III), Co(II)] in MeOH, leads to the isolation of a series of monomeric, trimeric, and tetrameric metal complexes, namely [Mn(bpaeOH)(NCS)(2)] (1), [Mn(bpaeO)(N(3))(2)] (2), [Fe(bpaeOH)(NCS)(2)] (3), [Fe(4)(bpaeO)(2)(CH(3)O)(2)(N(3))(8)] (4), [Co(bpaeOH)(NCS)(2)] (5), and [Co(3)(bpaeO)(2)(NO(3))(N(3))(4)](NO(3)) (6). These compounds have been investigated by single crystal X-ray diffractometry and magnetochemistry. In complex 1 the Mn(II) is bonded to one bpaeOH and two thiocyanate ions, while in complex 2 it is coordinated to a deprotonated bpaeO(-) and two azide ions. The oxidation states of manganese ions are 2+ for 1 and 3+ for 2, respectively, indicating that the different oxidation states depend on the type of binding anions. The structures of monomeric iron(II) and cobalt(II) complexes 3 and 5 with two thiocyanate ions are isomorphous to that of 1. Compounds 1, 2, 3, and 5 exhibit high-spin states in the temperature range 5 to 300 K. 4 contains two different iron(III) ions in an asymmetric unit, one is coordinated to a deprotonated bpaeO(-), an azide ion, and a methoxy group, and the other is bonded to three azide ions and two oxygens from bpaeO(-) and a methoxy group. Two independent iron(III) ions in 4 form a tetranuclear complex by symmetry. 4 displays both ferromagnetic and antiferromagnetic couplings (J = 9.8 and -14.3 cm(-1)) between the iron(III) ions. 6 is a mixed-valence trinuclear cobalt complex, which is formulated as Co(III)(S = 0)-Co(II)(S = 3/2)-Co(III)(S = 0). The effective magnetic moment at room temperature corresponds to the high-spin cobalt(II) ion (～4.27 μ(B)). Interestingly, 6 showed efficient catalytic activities toward various olefins and alcohols with modest to excellent yields, and it has been proposed that a high-valent Co(V)-oxo species might be responsible for oxygen atom transfer in the olefin epoxidation and alcohol oxidation reactions.     

Synthesis of aziridines from alkenes and aryl azides with a reusable macrocyclic tetracarbene iron catalyst

A new iron aziridination catalyst supported by a macrocyclic tetracarbene ligand has been synthesized. The catalyst, [((Me,Et)TC(Ph))Fe(NCCH(3))(2)](PF(6))(2), was synthesized from the tetraimidazolium precursor ((Me,Et)TC(Ph))(I)(4) and characterized by NMR spectroscopy, electrospray ionization mass spectrometry, and single-crystal X-ray diffraction. This iron complex catalyzes the aziridination of electron-donating aryl azides and a wide variety of substituted aliphatic alkenes, including tetrasubstituted ones, in a "C(2) + N(1)" addition reaction. Finally, the catalyst can be recovered and reused up to three additional times without significant reduction in yield.     

Biomimetic iron-catalyzed asymmetric epoxidation of aromatic alkenes by using hydrogen peroxide

A novel and general biomimetic non-heme Fe-catalyzed asymmetric epoxidation of aromatic alkenes by using hydrogen peroxide is reported herein. The catalyst consists of ferric chloride hexahydrate (FeCl(3)6 H(2)O), pyridine-2,6-dicarboxylic acid (H(2)(pydic)), and readily accessible chiral N-arenesulfonyl-N'-benzyl-substituted ethylenediamine ligands. The asymmetric epoxidation of styrenes with this system gave high conversions but poor enantiomeric excesses (ee), whereas larger alkenes gave high conversions and ee values. For the epoxidation of trans-stilbene (1 a), the ligands (S,S)-N-(4-toluenesulfonyl)-1,2-diphenylethylenediamine ((S,S)-4 a) and its N'-benzylated derivative ((S,S)-5 a) gave opposite enantiomers of trans-stilbene oxide, that is, (S,S)-2 a and (R,R)-2 a, respectively. The enantioselectivity of alkene epoxidation is controlled by steric and electronic factors, although steric effects are more dominant. Preliminary mechanistic studies suggest the in situ formation of several chiral Fe-complexes, such as [FeCl(L*)(2)(pydic)]HCl (L*=(S,S)-4 a or (S,S)-5 a in the catalyst mixture), which were identified by ESIMS. A UV/Vis study of the catalyst mixture, which consisted of FeCl(3)6 H(2)O, H(2)(pydic), and (S,S)-4 a, suggested the formation of a new species with an absorbance peak at lambda=465 nm upon treatment with hydrogen peroxide. With the aid of two independent spin traps, we could confirm by EPR spectroscopy that the reaction proceeds via radical intermediates. Kinetic studies with deuterated styrenes showed inverse secondary kinetic isotope effects, with values of k(H)/k(D)=0.93 for the beta carbon and k(H)/k(D)=0.97 for the alpha carbon, which suggested an unsymmetrical transition state with stepwise O transfer. Competitive epoxidation of para-substituted styrenes revealed a linear dual-parameter Hammett plot with a slope of 1.00. Under standard conditions, epoxidation of 1 a in the presence of ten equivalents of H(2) (18)O resulted in an absence of the isotopic label in (S,S)-2 a. A positive nonlinear effect was observed during the epoxidation of 1 a in the presence of (S,S)-5 a and (R,R)-5 a.     

A simple and effective catalytic system for epoxidation of aliphatic terminal alkenes with manganese(II) as the catalyst

A simple catalytic system that uses commercially available manganese(II) perchlorate as the catalyst and peracetic acid as the oxidant is found to be very effective in the epoxidation of aliphatic terminal alkenes with high product selectivity at ambient temperature. Many terminal alkenes are epoxidised efficiently on a gram scale in less than an hour to give excellent yields of isolated product (>90 %) of epoxides in high purity. Kinetic studies with some C9-alkenes show that the catalytic system is more efficient in epoxidising terminal alkenes than internal alkenes, which is contrary to most commonly known epoxidation systems. The reaction rate for epoxidation decreases in the order: 1-nonene>cis-3-nonene>trans-3-nonene. ESI-MS and EPR spectroscopic studies suggest that the active form of the catalyst is a high-valent oligonuclear manganese species, which probably functions as the oxygen atom-transfer agent in the epoxidation reaction.     

[Mn(TPPS)] immobilized on ionic liquid-modified silica as a heterogeneous and reusable catalyst for epoxidation of alkenes with NaIO<Subscript>4</Subscript> under ultrasonic irradiation

Effective epoxidation of alkenes using sodium periodate was accomplished with Manganese (III) tetrakis(p-sulfonatophenyl)porphyrin, [C₄₄H₂₆N₄O₁₂S₄Na₄], supported on ionic liquids-modified silica, Im-SiO₂, under ultrasonic irradiation conditions is reported. This heterogeneous catalyst, [Mn(TPPS)@SiO₂-Im] was characterized by elemental analysis, scanning electron microscopy (SEM), FT-IR and UV–Vis spectroscopic methods. The synthesized hybrid catalyst was applied for efficient epoxidation of various alkenes with sodium periodate in acetonitrile under ultrasonic irradiation conditions. This solid catalyst can be easily recovered by simple filtration and reused several time without apparent loss of its catalytic activity.     

Silica-Supported Tantalum Catalysts for Asymmetric Epoxidations of Allyl Alcohols

Tantalum good, titanium bad: This appears to be the case for silica-supported catalysts for the asymmetric epoxidation of allyl alcohols. Complexes such as [SiO-Ta(OEt)(4)] were prepared from silica and [Ta(=CHCMe(3))(CH(2)CMe(3))(3)], and in the presence of a tartrate and an alkyl hydroperoxide, these surface tantalum compounds lead to efficient and convenient catalysts for the asymmetric epoxidation of 2-propen-1-ol (R=H) and trans-2-hexen-1-ol (R=nPr; see reaction).     

Cationic palladium(II)-catalyzed stereoselective glycosylation with glycosyl trichloroacetimidates

The development of a new method for stereoselective glycosylation with glycosyl trichloroacetimidate donors employing cationic palladium(II), Pd(CH(3)CN)(4)(BF(4))(2), is described. This process employs Pd(CH(3)CN)(4)(BF(4))(2) as an efficient activator, providing access to a variety of disaccharides and glycopeptides. This reaction is highly stereoselective and proceeds under mild conditions with low catalyst loading. Interestingly, this palladium catalysis directs beta-glucosylations in the absence of classical neighboring group participation.     

Manganese-catalyzed epoxidations of alkenes in bicarbonate solutions

This paper describes a method, discovered and refined by parallel screening, for the epoxidation of alkenes. It uses hydrogen peroxide as the terminal oxidant, is promoted by catalytic amounts (1.0-0.1 mol %) of manganese(2+) salts, and must be performed using at least catalytic amounts of bicarbonate buffer. Peroxymonocarbonate, HCO(4)(-), forms in the reaction, but without manganese, minimal epoxidation activity is observed in the solvents used for this research, that is, DMF and (t)BuOH. More than 30 d-block and f-block transition metal salts were screened for epoxidation activity under similar conditions, but the best catalyst found was MnSO(4). EPR studies show that Mn(2+) is initially consumed in the catalytic reaction but is regenerated toward the end of the process when presumably the hydrogen peroxide is spent. A variety of aryl-substituted, cyclic, and trialkyl-substituted alkenes were epoxidized under these conditions using 10 equiv of hydrogen peroxide, but monoalkyl-alkenes were not. To improve the substrate scope, and to increase the efficiency of hydrogen peroxide consumption, 68 diverse compounds were screened to find additives that would enhance the rate of the epoxidation reaction relative to a competing disproportionation of hydrogen peroxide. Successful additives were 6 mol % sodium acetate in the (t)BuOH system and 4 mol % salicylic acid in the DMF system. These additives enhanced the rate of the desired epoxidation reaction by 2-3 times. Reactions performed in the presence of these additives require less hydrogen peroxide and shorter reaction times, and they enhance the yields obtained from less reactive alkene substrates. Possible mechanisms for the reaction are discussed.     

Chiral manganese complexes with pinene appended tetradentate ligands as stereoselective epoxidation catalysts

A novel family of chiral manganese complexes Lambda-1(CF(3)SO(3)) and Delta-2(CF(3)SO(3)), have been stereoselectively prepared, characterized and studied as epoxidation catalysts. The complexes are structurally related to [Mn(II)(CF(3)SO(3))(2)(alpha-MCP)] (MCP=N,N'-dimethyl-N,N'-bis(2-pyridylmethyl)cyclohexane-trans-1,2-diamine), recently reported as a very efficient epoxidation catalyst in combination with peracetic acid. Pinene rings have been fused to the 4 and 5 positions of the two pyridine groups of the ligand, giving rise to complexes where the two labile binding sites of the manganese ion are confined in a better-defined chiral pocket than in the parent [Mn(II)(CF(3)SO(3))(2)(alpha-MCP)]. Chirality in these complexes arises from the stereochemistry of the trans-diaminocyclohexane ring, from the pinene ring and also from the topological chirality adopted by the ligand upon binding to the manganese ion. While previous studies have demonstrated that small modifications in the structure of the MCP ligand result in a dramatic loss of efficiency, Lambda-1(CF(3)SO(3)) and Delta-2(CF(3)SO(3)) exhibit comparable catalytic activity to [Mn(II)(CF(3)SO(3))(2)(alpha-MCP)]. In addition, the complexes exhibit a remarkable stereoselectivity (up to 46% ee) in the epoxidation of selected substrates. The results reported in this work point towards modification of the 4 and 5 positions of the pyridine groups as a new strategy towards the design of stereoselective versions of this family of highly active and environmentally benign epoxidation catalysts.     

Manganese(III) porphyrin supported on multi-wall carbon nanotubes: A highly efficient and reusable biomimetic catalyst for epoxidation of alkenes with sodium periodate

In this paper, the biomimetic epoxidation of alkenes catalyzed by tetrakis(p-aminophenyl)porphyrinatomanganese(III) chloride, [Mn(TNH₂PP)Cl], supported on functionalized multi-wall carbon nanotubes, MWCNT, is reported. The catalyst, [Mn(TNH₂PP)Cl-MWCNT], was used as an efficient and heterogeneous catalyst for epoxidation of alkenes with NaIO₄ at room temperature, in the presence of imidazole as an axial ligand. This new heterogenized catalyst was characterized by elemental analysis, FT IR spectroscopy, diffuse reflectance UV–Vis spectrophotometry, scanning electron microscopy and transmission electron microscopy. The biggest advantage of Mn(TNH₂PP)Cl-MWCNT is its high reusability in the oxidation reactions, in which the catalyst was reused several times without significant loss of its catalytic activity.     

Synthesis, structure, and catalytic activity of mononuclear iron and (mu-Oxo)diiron complexes with the ligand 2,6-bis(N-methylbenzimidazol-2-yl)pyridine

Iron complexes including polyimidazole and exchangeable ligands are studied with the aim of modeling the structural and functional features of the non-heme iron centers of dinuclear proteins, such as methane monooxygenase. In [Fe(2)OL(2)(MeOH)(2)(NO(3))(2)](NO(3))(2) (1) (L = 2,6-bis(N-methylbenzimidazol-2-yl)pyridine), each Fe(III) is in a distorted octahedral environment and has a donor set of N(3)O(3) which includes three N atoms from L and three O atoms from a nitrate, micro-oxo, and methanol. In complex [FeLCl(3)] (2) (L = 2,6-bis(N-methylbenzimidazol-2-yl)pyridine), Fe(III) is coordinated to three nitrogen atoms from L and three chloride ions. Complex 1 efficiently catalyzed the oxidation of cyclohexane with 51% conversion to cyclohexanol. It also catalyzed the epoxidation of styrene, cyclohexane, 2-methyl-2-butene, and cis- and trans-2-heptene with 51-84% conversions and high selectivity (71-99%) for epoxide products. Complex 2, however, has no specific reactivity toward these substrates. From the alcohol/ketone (A/K) ratio close to 1 in the oxidation of cyclohexane, the low KIE (kinetic isotope effect K(H)/K(D) ratio = 1.8) for cyclohexanol formation, and the nonstereospecificity of the oxidation of cis-dimethylcyclohexane, it can be concluded that long-lived alkyl radicals are involved in the oxidation catalyzed by complex 1. On the other hand, the stereospecific epoxidation of alkenes, the stereoselective oxidation of cumene, and the high degree of retention of configuration in the oxidation of cis- and trans-2-heptene suggest that a nonradical species, probably a metal-based intermediate, is involved in the oxidation of alkenes and cumene.