Catalytic effect of copper on the hexacyanoferrate(III)-cyanide redox reaction-I The uncatalysed and catalysed reactions

A kinetic study of the hexacyanoferrate(III)-cyanide redox reaction has been made in connection with development of a new catalytic method for copper. The reaction kinetics change with time from first- to second-order dependence with respect to hexacyanoferrate(III). The reaction is nearly inverse first-order with respect to hexacyanoferrate(II) and first-order with respect to cyanide. The reaction shows a strong positive primary salt effect, but a very small increase in the reaction rate with temperature is found. A parallel reaction proceeds with a first-order dependence with respect to hydroxide. A tentative mechanism is proposed for the first reaction, involving the formation of cyanogen radicals. The second reaction corresponds to the well-known decomposition of hexacyanoferrate(III) in alkaline medium. The catalysed reaction exhibits similar kinetics with respect to hexacyanoferrate(II) and (III) but is zero-order with respect to cyanide and hydroxide and first-order with respect to catalyst. The proposed mechanism involves two consecutive interactions of the hexacyanoferrate(III) with copper(I) and with copper(II) cyanide complexes respectively, followed by a 2-electron oxidation of a co-ordinatively bridging cyanide group.     

Spectral and mechanistic investigations of ruthenium(III) catalyzed oxidation of atenolol by diperiodatocuprate(III) in aqueous alkaline medium

The kinetics of ruthenium(III) catalyzed oxidation of atenolol by diperiodatocuprate(III) in aqueous alkaline medium at a constant ionic strength of I = 0.10 M has been studied spectrophotometrically at 27°C. The reaction between diperiodatocuprate(III) and atenolol in alkaline medium in presence of ruthenium(III) exhibits 2: 1 stoichiometry (atenolol: diperiodatocuprate(III)). The main products were identified by spot test, IR, NMR, and LC-MS. The reaction is of first order in DPC concentrations and has less than unit order in both ATN and alkali concentrations. The order in ruthenium(III) was unity. Intervention of free radicals was observed in the reaction. Increase in periodate concentration decreases the rate. The oxidation reaction in alkaline medium has been shown to proceed via a ruthenium(III)-atenolol complex, which reacts with monoperiodatocuprate(III) in a rate determining step followed by other fast steps to give the products. Probable mechanism is proposed and discussed. The activation parameters with respect to the slow step of the mechanism and thermodynamic quantities were determined and discussed.     

Extraction Kinetics of Rare Earth Elements with sec—Octyl—phenoxy Acetic Acid

ＩｎｔｒｏｄｕｃｔｉｏｎＩｔｉｓｗｅｌｌｋｎｏｗｎｔｈａｔｙｔｔｒｉｕｍｃａｎｂｅｕｓｅｄｉｎｍａｎｙｆｉｅｌｄｓ ,ｓｕｃｈａｓｍｅｔａｌｌｕｒｇｙ ,ｃｅｒａｍｉｃｓ ,ｌａｓｅｒｓａｎｄｅｌｅｃｔｒｏｎ ｉｃｓ ,ｅｓｐｅｃｉａｌｌｙｉｎｆｌｕｏｒｅｓｃｅｎｔｍａｔｅｒｉａｌｓｗｈｏｓｅｎｅｅｄｆｏｒｈｉｇｈｐｕｒｉｔｙｙｔｔｒｉｕｍｏｘｉｄｅｉｓｉｎｃｒｅａｓｉｎｇ .ＩｎＣｈｉｎａ ,ｔｈｅｒｅ ｓｏｕｒｃｅｏｆｙｔｔｒｉｕｍｉｓｒｉｃｈ ,ａｎｄｔｈｅｈｉｇｈｐｕｒｅｙｔｔｒｉｕｍｉｓｂｅ ｉｎｇｏ…     

Mechanistic analysis of reductive nitrosylation on water-soluble cobalt(III)-porphyrins

The reactions of NO and/or NO2- with three water-soluble cobalt porphyrins [Co(III)(P)(H2O)2]n, where P = TPPS, TCPP, and TMPyP, were studied in detail. At pH < 3, the reaction with NO proceeds through a single reaction step. From the kinetic data and activation parameters, the [Co(III)(P)(NO)(H2O)]n complex is proposed to be the primary product of the reaction with NO. This complex reacts further with a second NO molecule through an inner-sphere electron-transfer reaction to generate the final product, [Co(III)(P)(NO-)](n-1). At pH > 3, although a single reaction step is also observed, a systematic study as a function of the NO and NO2- concentrations revealed that two reaction steps are operative. In the first, NO2- and NO compete to substitute coordinated water in [Co(III)(P)(H2O)2]n to yield [Co(III)(P)(NO)(H2O)]n and [Co(III)(P)(NO2-)(H2O)](n-1) as the primary reaction products. Only the nitrite complex could be detected and no final product formation was observed during the reaction. It is proposed that [Co(III)(P)(NO)(H2O)]n rapidly reacts with NO2- to form the nitrite complex, which in the second reaction step reacts with another NO molecule to generate the final product through an inner-sphere electron-transfer reaction. The reported results are relevant for the interaction of vitamin B(12a) with NO and NO2-.     

Study of the Complexation,Adsorption and Electrode Reaction Mechanisms of Chromium(VI) and (III) with DTPA Under Adsorptive Stripping Voltammetric Conditions

The complexation of Cr(III) and Cr(VI) with diethylenetriaminepentaacetic acid (DTPA), the redox behavior of these complexes and their adsorption on the mercury electrode surface were investigated by a combination of electrochemical techniques and UV/vis spectroscopy. A homogenous two‐step reaction was observed when mixing Cr(III), present as hexaquo complex, with DTPA. The first reaction product, the electroactive 1 : 1 complex, turns into an electroinactive form in the second step. The results indicate that the second reaction product is presumably a 1 : 2 Cr(III)/DTPA complex. The electroreduction of the DTPA‐Cr(III) complex to Cr(II) was found to be diffusion rather than adsorption controlled.The Cr(III) ion, generated in‐situ from Cr(VI) at the mercury electrode at about ?50 mV (vs. Ag|AgCl) (3 mol L^?1 KCl), was found to form instantly an electroactive and adsorbable complex with DTPA. By means of electrocapillary measurements its surface activity was shown to be 30 times higher than that of the complex built by homogenous reaction of DTPA with the hydrated Cr(III). Both components, DTPA and the in‐situ built complex Cr(III) ion were found to adsorb on the mercury electrode.The effect of nitrate, used as catalytic oxidant in the voltammetric determination method, on the complexation reaction and on the adsorption processes was found to be negligible.The proposed complex structures and an overall reaction scheme are shown.     

Fast nitroxyl trapping by ferric porphyrins

Iron(II) porphyrin nitrosyl complexes are obtained in high yields from the reaction of iron(III) porphyrins with the nitroxyl donors sodium trioxodinitrate and toluensulfohydroxamic acid. The reaction was found to proceed both in organic solvents and in aqueous media from iron(III) (meso-tetraphenyl) porphyrinate ([FeIII(TPP)]+) and iron(III) meso-tetrakis (4-sulfonatophenyl) porphyrinate ([FeIII(TPPS)]3-) or iron(III) protoporphyrin IX, respectively. The kinetic rate constant for the reaction of ([FeIII(TPPS)]3-) with sodium trioxodinitrate (kon) was estimated to be 1.00 +/- 0.04 x 107 M-1 s-1. As well as resulting in a versatile method for obtaining ferrous nitrosyl porphyrins, the reaction points at ferric porphyrins as efficient nitroxyl traps and provides a tool to model nitroxyl reactivity toward hemeproteins.     

Novel iron(III) porphyrazine complex. Complex speciation and reactions with NO and H2O2

The complex [iron(III) (octaphenylsulfonato)porphyrazine] (5-), Fe (III)(Pz), was synthesized. The p K a values of the axially coordinated water molecules were determined spectrophotometrically and found to be p K a 1 = 7.50 +/- 0.02 and p K a 2 = 11.16 +/- 0.06. The water exchange reaction studied by (17)O NMR as a function of the pH was fast at pH = 1, k ex = (9.8 +/- 0.6) x 10 (6) s (-1) at 25 degrees C, and too fast to be measured at pH = 10, whereas at pH = 13, no water exchange reaction occurred. The equilibrium between mono- and diaqua Fe (III)(Pz) complexes was studied at acidic pH as a function of the temperature and pressure. Complex-formation equilibria with different nucleophiles (Br (-) and pyrazole) were studied in order to distinguish between a five- (in the case of Br (-)) or six-coordinate (in the case of pyrazole) iron(III) center. The kinetics of the reaction of Fe (III)(Pz) with NO was studied as a model ligand substitution reaction at various pH values. The mechanism observed is analogous to the one observed for iron(III) porphyrins and follows an I d mechanism. The product is (Pz)Fe (II)NO (+), and subsequent reductive nitrosylation usually takes place when other nucleophiles like OH (-) or buffer ions are present in solution. Fe (III)(Pz) also activates hydrogen peroxide. Kinetic data for the direct reaction of hydrogen peroxide with the complex clearly indicate the occurrence of more than one reaction step. Kinetic data for the catalytic decomposition of the dye Orange II by H 2O 2 in the presence of Fe (III)(Pz) imply that a catalytic oxidation cycle is initiated. The peroxide molecule first coordinates to the iron(III) center to produce the active catalytic species, which immediately oxidizes the substrate. The influence of the catalyst, oxidant, and substrate concentrations on the reaction rate was studied in detail as a function of the pH. The rate increases with increasing catalyst and peroxide concentrations but decreases with increasing substrate concentration. At low pH, the oxidation of the substrate is not complete because of catalyst decomposition. The observed kinetic traces at pH = 10 and 12 for the catalytic cycle could be simulated on the basis of the obtained kinetic data and the proposed reaction cycle. The experimental results are in good agreement with the simulated ones.     

Dependence of the rate of thrombin/antithrombin III reaction upon the turnover rate of a catalytic amount of heparin

Commercially available heparin preparations slightly enhanced the rate of thrombin/antithrombin (AT) III reaction at pH 6.05 in the absence of NaCl. However, this accelerative activity was significantly lower than that induced by heparin with high affinity for AT III (HA-heparin), probably due to the formation of the binary complexes of HA-heparin-AT III as well as that composed of thrombin and heparin with low affinity for AT III (LA-heparin). The HA-heparin-catalyzed thrombin/AT III reaction was faster in the presence of 0.1 M NaCl at pH 6.05 than that in the absence of the salt. LA-heparin and dextran sulfate (DS) were also found to accelerate the thrombin/AT III reaction rate, but neither substance catalyzed the formation of the complex in the presence of 0.1 M NaCl at pH 7.4. LA-heparin was also confirmed to compete with HA-heparin for enhancement of the thrombin/AT III reaction. Thus, it appears that AT III tends to form a ternary complex with the thrombin-DS or thrombin-LA-heparin complex, even in the presence of 0.1 M NaCl, whereas factor Xa reacts with the AT III-DS or AT III-LA-heparin complex. These results indicate that HA-heparin is the only substance having the ability to catalyze the thrombin/AT III reaction, and that its turnover rate is markedly elevated in the presence of strongly electropositive and electronegative ions because of the decreased affinity of the enzyme for heparin under such conditions.     

Kinetic study of ruthenium(III)-catalyzed oxidation of <Emphasis Type="SmallCaps">l</Emphasis>-alanine by diperiodatoargentate(III) in aqueous alkaline medium

The kinetics of Ru(III)-catalyzed oxidation of l-alanine (Ala) by diperiodatoargentate(III) (DPA) in alkaline medium at 25 °C and a constant ionic strength of 0.90 mol dm⁻³ was studied spectrophotometrically. The products are acetaldehyde, Ag(I), ammonia and bicarbonate. The [Ala] to [DPA] stoichiometry is 1:1. The reaction is first order in both [Ru(III)] and [DPA] and has less than unit order in both [Ala] and [alkali]. Addition of periodate has a retarding effect on the reaction. The effects of added products, ionic strength and dielectric constant of the reaction medium have been investigated. The reaction proceeds via a Ru(III)–Ala complex, which further reacts with one molecule of monoperiodatoargentate(III) in the rate-determining step. The reaction constants were calculated at different temperatures and the activation parameters have been evaluated.     

On the mechanism and kinetics of radical reactions of epoxyketones and epoxynitriles induced by titanocene chloride

The reactions of a series of epoxynitriles and epoxyketones induced by titanocene chloride have been studied. The kinetics of the decyanogenation of beta,gamma-epoxynitriles with Ti(III) corresponds to a radical reaction (k25 approximately 106 s-1), as demonstrated by competition experiments with H-transfer from 1,4-cyclohexadiene (1,4-CHD) or PhSH or conjugate addition to acrylonitrile. The 5-exo cyclization onto nitrile induced by Ti(III) is a radical reaction (k25 approximately 107 s-1) as seen in competition experiments with H-transfer from PhSH or the titanocene-water complex. The iminyl or alkoxyl radicals generated by 5-exo cyclization onto nitriles or ketones only undergo a reduction with Ti(III). This reaction overwhelms any alternative process, such as tandem cyclization onto alkenes or beta-scission. Iminyl radicals generated by 4-exo cyclizations onto nitriles undergo reduction with Ti(III) and beta-scission reaction in a ratio of 96:4 when the alpha-substituent is CN. Alkoxyl radicals from 4-exo cyclizations onto ketone carbonyls undergo reduction with Ti(III) and beta-scission in a ratio of 60:40 when the alpha-substituent is COOR. In nearly all the reactions studied, the role of Ti(III) is triple: a radical initiator (homolytic cleavage of oxirane), a Lewis acid (coordination to CN or C=O), and a terminator (reduction of iminyl or alkoxyl radicals).     

Fluorometric Determination of Iron(Iii) with O-Hydroxyhydroquinonephthalein in the Presence of Brij 58

Abstract

A highly sensitive fluorescence reaction of iron(III) with o-hydroxyhydroquinonephthalein (Qnph) in the presence of various surfactants, and its application to the fluorophotometry of trace amounts of iron(III) is described. the method is based on the fluorescence quenching reaction between Qnph and iron(III) in the presence of Brij 58 at pH 3–4. the quenching calibration graph was linear over the range 0 – 300 ng per ml iron(III) by using fluorescence reaction at Em 525 nm with Ex 470 nm, and the iron(III) detection limit was 5 ng/ml. the proposed method is simple, rapid and does not involve heating or solvent extraction.     

[TPPFe(III)]~2O的合成及其对细胞色素P-450的模拟

TPPFe(III)Cl通过中性Al~2O~3色谱柱得到一个新化合物, 它在HPLC中的保留时间比TPPFe(III)Cl大得多, IR、UV-Vis和元素分析表明, 这个新化合物是[TPPFe(III)]~2O. 同TPPFe(III)Cl一样, 它具有在常温常压下催化碳氢化合物单充氧化的性质。[TPPFe(III)]~2O催化下PhIO氧化环己烷的反应, 在CH~2Cl~2和环己烷介质中, 氧化产率分别为14.97和62.6%, 高于TPPFe(III)Cl作催化剂时的产率。在环己烷溶剂中, 反应产率与反应时间呈线性关系, 且反应有大约3小时诱导期。但在CH~2Cl~2溶剂中不存在反应产物与时间的线性关系, 也不存在诱导期。与TPPFe(III)Cl比较,[TPPFe(III)]~2O对氧化剂更稳定。上述事实表明, [TPPFe(III)]~2O能够作为细胞色素P-450的模型化合物。     

Mechanochemical synthesis of chromium tris(2-ethylhexanoate) and evaluation of its catalytic activity in the reaction of ethylene trimerization

A method was developed for synthesis of chromium(III) tris(2-ethylhexanoate) by the mechanochemical interaction of chromium(III) chloride with sodium 2-ethylhexanoate without a solvent, followed by heating of the reaction mixture. The influence exerted by the conditions of the mechanical activation and the subsequent thermal treatment on the course of the processes and some properties of activated mixtures was studied. Chromium(III) tris(2-ethylhexanoate) can be isolated from the reaction mixture in a ～75% yield. Both the activated reaction mixture and the target product obtained exhibit a high catalytic activity and selectivity in the reaction of ethylene trimerization.     

Mechanistic investigations of ruthenium(III) catalyzed oxidation of pentoxifylline by copper(III) periodate complex in aqueous alkaline medium

Abstract  

The kinetics of the oxidation of ruthenium(III)-catalyzed oxidation of pentoxifylline (PTX) by diperiodatocuprate(III) (DPC) in aqueous alkaline medium at a constant ionic strength of 0.30 mol dm⁻³ was studied spectrophotometrically. The reaction between PTX and DPC in alkaline medium in the presence of Ru(III) exhibits 1:2 stoichiometry (PTX:DPC). The reaction was of first order in DPC, less than the unit order in [PTX] and [OH⁻] and negative fractional order in [IO₄ ⁻]. The order in [Ru(III)] was unity. Intervention of free radicals was observed in the reaction. The main products were identified by TLC and spectral studies including LC-MS. The oxidation reaction in alkaline medium has been shown to proceed via a Ru(III)-PTX complex, which reacts with monoperiodatocuprate(III) to decompose in a rate determining step followed by a fast step to give the products. The reaction constants involved in different steps of the mechanism were calculated. The activation parameters with respect to the slow step of the mechanism were computed and discussed, and thermodynamic quantities were also determined. The active species of catalyst and oxidant have been identified.     

Theoretical insights into enantioselective catalysis: the mechanism of the Kharasch-Sosnovsky reaction

The mechanism of the Kharasch-Sosnovsky reaction has been investigated using B3 LYP/6-31G* calculations on a chiral reaction model [cyclohexene+tert-butyl perbenzoate-->cyclohex-2-enyl benzoate+tert-butyl alcohol, catalyzed by a chiral bisoxazoline-copper(I) complex]. Although two previous reaction mechanisms have been considered, the results are consistent with a new mechanistic pathway. This path involves ligand exchange between the catalyst-cyclohexene complex with tert-butyl perbenzoate to give a catalyst-perester complex, which undergoes an (either one- or two-step) oxidative addition reaction to yield a copper(III) complex. The limiting step of the Kharasch-Sosnovsky reaction consists of an intramolecular step involving the abstraction of an allylic hydrogen from cyclohexene [which is pi-bound to the copper(III) complex]. The resulting allyl-copper(III) complex (subsequent to the loss of tert-butanol) can undergo a haptotropic rearrangement by means of an eta1-allyl/eta3-allyl equilibrium, leading to scrambling between vinylic and allylic positions when an isotopically labeled substrate is used. The allyl-copper(III) ion undergoes a stereospecific reductive elimination involving the pi-bond migration to yield a reaction product-catalyst complex, which can regenerate the alkene-copper(I) complex by ligand exchange. The proposed reaction mechanism is consistent with all known experimental results (including enantioselectivity data).     

Direct cyanation of heteroaromatic compounds mediated by hypervalent iodine(III) reagents: In situ generation of PhI(III)-CN species and their cyano transfer

Hypervalent iodine(III) reagents mediate the direct cyanating reaction of a wide range of electron-rich heteroaromatic compounds such as pyrroles 1, thiophenes 3, and indoles 5 under mild conditions (ambient temperature), without the need for any prefunctionalization. Commercially available trimethylsilylcyanide is usable as a stable and effective cyanide source, and the reaction proceeds in a homogeneous system. The N-substituent of pyrroles is crucial to avoid the undesired oxidative bipyrrole coupling process, and thus a cyano group was introduced selectively at the 2-position of N-tosylpyrroles 1 in good yields using the combination of phenyliodine bis(trifluoroacetate) (PIFA), TMSCN, and BF3.Et2O at room temperature. In the reaction mechanism, cation radical intermediates of heteroaromatic compounds are involved as a result of single electron oxidation, and the key to successful transformations seems to depend on the oxidation potential of the substrates used. Thus, the reaction was also successfully extended to other heteroaromatic compounds having oxidation potentials similar to that of N-tosylpyrroles such as thiophenes 3 and indoles 5. However, regioisomeric mixtures of the products derived from the reaction at the 2- and 3-positions were obtained in the case of N-tosylindole 5a. Further investigation performed in our laboratory provided insights into the real active iodine(III) species during the reaction; the reaction is induced by an active hypervalent iodine(III) species having a cyano ligand in situ generated by ligand exchange reaction at the iodine(III) center between trifluoroacetoxy group in PIFA and TMSCN, and effective cyanide introduction into heteroaromatic compounds is achieved by means of the high cyano transfer ability of the hypervalent iodine(III)-cyano intermediates. In fact, the reaction of N-tosylpyrrole 1a with a hypervalent iodine(III)-cyano compound (e.g., (dicyano)iodobenzene 8), in the absence of TMSCN, took place to afford the 2-cyanated product 2a in good yield, and an effective preparation of the intermediates is of importance for successful transformation. 1,3,5,7-Tetrakis[4-{bis(trifluoroacetoxy)-iodo}phenyl]adamantane 12, a recyclable hypervalent iodine(III) reagent, was also comparable in the cyanating reactions as a valuable alternative to PIFA, affording a high yield of the heteroaromatic cyanide by facilitating isolation of the cyanated products with a simple workup. Accordingly, after preparing the active hypervalent iodine(III)-CN species by premixing of a recyclable reagent 12, TMSCN, and BF3.Et2O for 30 min in dichloromethane, reaction of a variety of pyrroles 1 and thiophenes 3 provided the desired cyanated products 2 and 4 in high yields. The iodine compound 13, recovered by filtration after replacement of the reaction solvent to MeOH, could be reused without any loss of activity (the oxidant 12 can be obtained nearly quantitatively by reoxidation of 13 using m-CPBA).     

Reactivity of aquacobalamin and reduced cobalamin toward S-nitrosoglutathione and S-nitroso-N-acetylpenicillamine

The reactions of aquacobalamin (Cbl(III)H2O, vitamin B12a) and reduced cobalamin (Cbl(II), vitamin B12r) with the nitrosothiols S-nitrosoglutathione (GSNO) and S-nitroso-N-acetylpenicillamine (SNAP) were studied in aqueous solution at pH 7.4. UV-vis and NMR spectroscopic studies and semiquantitative kinetic investigations indicated complex reactivity patterns for the studied reactions. The detailed reaction routes depend on the oxidation state of the cobalt center in cobalamin, as well as on the structure of the nitrosothiol. Reactions of aquacobalamin with GSNO and SNAP involve initial formation of Cbl(III)-RSNO adducts followed by nitrosothiol decomposition via heterolytic S-NO bond cleavage. Formation of Cbl(III)(NO-) as the main cobalamin product indicates that the latter step leads to efficient transfer of the NO- group to the Co(III) center with concomitant oxidation of the nitrosothiol. Considerably faster reactions with Cbl(II) proceed through initial Cbl(II)-RSNO intermediates, which undergo subsequent electron-transfer processes leading to oxidation of the cobalt center and reduction of the nitrosothiol. In the case of GSNO, the overall reaction is fast (k approximately 1.2 x 10(6) M(-1) s(-1)) and leads to formation of glutathionylcobalamin (Cbl(III)SG) and nitrosylcobalamin (Cbl(III)(NO-)) as the final cobalamin products. A mechanism involving the reversible equilibrium Cbl(II) + RSNO <==> Cbl(III)SR + NO is suggested for the reaction on the basis of the obtained kinetic and mechanistic information. The corresponding reaction with SNAP is considerably slower and occurs in two distinct reaction steps, which result in the formation of Cbl(III)(NO-) as the ultimate cobalamin product. The significantly different kinetic and mechanistic features observed for the reaction of GSNO and SNAP illustrate the important influence of the nitrosothiol structure on its reactivity toward metal centers of biomolecules. The potential biological implications of the results are briefly discussed.     

Pressurometric titrations with xenon trioxide as oxidant

The reaction of XeO(3) with thirteen reducing agents was studied qualitatively. From these, Fe(II) and Ti(III) were chosen for direct titration with XeO(3) with pressurometric end-point detection. The precision was a few parts per thousand. Evidence was found for the production of oxygen during both titrations, and of hydrogen peroxide formation during the Ti(III) reaction. The Ti(III)/Xe reacting ratio was independent of the amount of Ti(III) from 35.5 to 87.7 micromole and was 5.93 +/- 0.03 instead of the expected 6.00. The ratio for the Fe(II) reaction varied from 5.85 to 5.95 over the Fe(II) range from 10.05 to 78.7 micromole. The stoichiometric ratio for the iodometric standardization of XeO(3) solutions was confirmed as 6.00.     

Anion-controlled assembly of four manganese ions: structural, magnetic, and electrochemical properties of tetramanganese complexes stabilized by xanthene-bridged Schiff base ligands

The reaction of manganese(II) acetate with a xanthene-bridged bis[3-(salicylideneamino)-1-propanol] ligand, H(4)L, afforded the tetramanganese(II,II,III,III) complex [Mn(4)(L)(2)(μ-OAc)(2)], which has an incomplete double-cubane structure. The corresponding reaction using manganese(II) chloride in the presence of a base gave the tetramanganese(III,III,III,III) complex [Mn(4)(L)(2)Cl(3)(μ(4)-Cl)(OH(2))], in which four Mn ions are bridged by a Cl(-) ion. A pair of L ligands has a propensity to incorporate four Mn ions, the arrangement and oxidation states of which are dependent on the coexistent anions.     

Kinetics and mechanism of the [Ru(III)(edta)(H2O)](-)-mediated oxidation of cysteine by H2O2

The kinetics and mechanism of the [Ru(III)(edta)(H(2)O)](-)-mediated oxidation of cysteine (RSH) by hydrogen peroxide (edta(4-) = ethylenediaminetetraacetate), were studied in detail as a function of both the hydrogen peroxide and cysteine concentrations at pH 5.1 and room temperature. The kinetic traces reveal clear evidence for a catalytic process in which hydrogen peroxide reacts directly with cysteine coordinated to the Ru(III)(edta) complex in the form of [Ru(III)(edta)SR](2-). A parallel process in which [Ru(III)(edta)(H(2)O)](-) first reacts with H(2)O(2) to produce [Ru(V)(edta)O](-) and subsequently oxidizes cysteine, is orders of magnitude slower than the [Ru(III)(edta)(H(2)O)](-)-mediated oxidation in which cysteine rapidly coordinates to [Ru(III)(edta)(H(2)O)](-) prior to the reaction with H(2)O(2). HPLC product analyses revealed the formation of cystine (RSSR) as major product along with cysteine sulfinic acid (RSO(2)H) in the reaction system, and established the catalytic role of [Ru(III)(edta)(H(2)O)](-). Simulations were performed to account for the rather complex kinetic traces in terms of the suggested reaction mechanism. The results of the simulations support the proposed reaction mechanism that involves the oxidation of coordinated cysteine to cysteine sulfenic acid (RSOH), which subsequently rapidly reacts with H(2)O(2) and RSH to form RSO(2)H and RSSR, respectively.