Transition metal complexes with bidentate ligands spanning trans-positions. VI. The preparation of some diaryl- and dialkyl derivatives of 2,11-bis (phosphinomethyl)benzo [c]phenanthrene

The preparation of the ditertiary phosphines 2,11-bis (di-m-tolylphosphinomethyl)benzo [c]phenanthrene ( 1b ), 2,11-bis (di-p-anisylphosphinomethyl)benzo-[c]phenanthrene ( 1c ), 2,11-bis (di-m-trifluoromethylphenylphosphinomethyl) benzo-[c]phenanthrene ( 1d ), 2,11-bis (dicyclohexylphosphinomethyl)benzo [c]phenanthrene ( 1e ) and 2,11-bis [di-(t-butyl)phosphinomethyl]benzo [c]phenanthrene ( 1f ), by a combination of synthetic routes is described.     

Transition metal complexes with bidentate ligands spanning trans-positions. XII. The preparation and properties of complexes trans-[MX2 (1)] and trans-[PtHCl (1)] (M = Ni,Pd and Pt; X = Cl and NCS; 1 = ditertiary phosphine)

Complexes [MX₂(1)] (M = Ni, Pd and Pt; X=Cl and NCS; 1 = 2,11-bis(dialkyl-[or diaryl]phosphinomethyl)benzo[c]phenanthrene; alkyl = cyclohexyl t-butyl; aryl = m-tolyl, p-anisyl and m-CF₃ C₆H₄) have been synthesized. An NMR. study of the t-butyl complexes provides evidence for a “fan-like” motion of the benzo[c]phenanthrene moiety over the plane of the complex.     

Transition-Metal Complexes with Bidentate Ligands Spanning trans-Positions. Part XVII. Some platinum(II) complexes with anionic ligands such as methoxide,formate, carboxylate,hydride, and borohydride,and the X-ray crystal structure of [PtHCl( )] (PP = 2,11-bis(diphenylphosphinomethyl)benzo[c]phenanthrene)

The complexes trans-[PtXY( 2 ] (X = H or Me; Y = OMe, OCHO, CO₂H, and BH₄; 2 = 2,11-bis{bis[3-(trifluoromethyl)phenyl]phosphinomethyl}benzo[c]phenanthrene) were prepared, and their decompositions to trans[PtHX( 2 )] were studied. Some binuclear hydrido-bridged complexes, e.g.[( 2 )HPt(μ-H)PtH( 2 )]⁺, were also obtained. The preparation of complexes trans-[PtHX( 28 )₂] (X = H or Me, 28 = bis[3-(trifluoromethyl)phenyl]benzylphosphine) is also reported. The X-ray crystal structure of trans-[PtHCl 1 )] ( 1 = 2,11-bis(diphenylphosphinomethyl)benzo[c]phenanthrene) was carried out.     

Transition Metal Complexes with Bidentate Ligands Spanning trans-Positions. Part XIII. Preparation,properties and crystal and molecular structures of chlorocarbonyl-2,11-bis(diphenylphosphinophenyl) benzo[c]phenanthreneiridium (I) and trichlorocarbonyl-2,11-bis(diphenylphosphinomethyl) benzo[c]phenanthreneiridium(III)

The complex [IrCl₃(CO)( 1 )]( 4,1 =2,11-bis (diphenylphosphinomethyl)benzo[c]phenanthrene) has been prepared by CuCl₂-oxidation of [IrCl(CO)( 1 )]( 2a ). It is shown that the chlorine oxidation of 2a gives a mixture of products whose composition depends on the reaction conditions. The X-ray crystal structures of 2a and 4 have been determined. The small conformational differences observed for the trans-spanning ligand 1 in the two complexes are likely to be caused by the difference in Ir-P bond lengths in square planar 2a and octahedral 4 (2.310(4) and 2.411(3) Å, respectively).     

Transition-Metal Complexes with Bidentate Ligands Spanning trans-Positions. II. Preparation and properties of complexes trans-[MX2(1)] (M = Ni,Pd and Pt; X = Cl,Br and I; 1 = 2, 11-Bis(diphenylphosphinomethyl)benzo[c]phenanthrene)

It is shown that the ligand 2,11-bis(diphenylphosphinomethyl)benzo[c]phenanthrene ( 1 ) reacts with nickel(II), palladium(II) and platinum(II) substrates giving either exclusively, or predominantly, mononuclear complexes of the type trans-[MX₂( 1 )] in which the organic ligand spans trans-positions. It is further shown that the spectroscopic properties which are mainly associated with metal and donor atoms in complexes of this type are closely related to those of the corresponding square planar complexes of the type trans-[MX₂(Ph₂PCH₂Ph)₂].     

Overcrowded molecules. V. 3,10-dimethyl-1,12-bis(2-pyridyl)benzo[c] phenanthrene-2,11-diol

The bis ketene acetal adduct of 4a,10a-diazoniaanthra[1,2-α]anthracene diperchlorate ( 10 ) was used to prepare the highly overcrowded benzo[c]phenanthrene 2 by a known procedure. Its oxidation with cupric chloride provided the isoxazolium zwitterion, 3 , via an intramolecular cyclization.     

Transition metal complexes with bidentate ligands spanning trans-positions. Part XIV. Some complexes of 2,11-bis(diphenylphosphinomethyl)benzo[c]phenanthrene with platinum (0) and their reactivities

The ligand 2,11-bis(diphenylphosphinomethyl)benzo[c]phenanthrene ( 1 ) has been used to prepare complexes of the type [PtL( 1 )] (L ? C₂H₄, CH₂?CH? CO₂Me, PhC?CPh, MeC?CMe, MeO₂CC?CCO₂Me, (i-Pr)O₂CC?CCO₂(i-Pr), Ph₃P and CO). It is shown that these complexes are less labile than the corresponding species [PtL(Ph₃P)₂]. The preparation of complexes trans-[PtX(R)(1)] by oxidative addition of RX (RX ? PhCH₂Br and Mel) to [Pt(C₂H₄)(1)] is described. The isolation of [PtO₂(CH₃)₂CO(1)] is also reported.     

1,4-Cyeloaddition reactions. IV. preparation of Cyclopenta[g]furo[3,2-c]quinolines,Cyclopenta- [f]furo[3,2-c]quinolines,Benzo[H]furo[3,2-c]quinolines,and Furo- [3,2-c]indeno[1,7-gh] quinolines from 2,3-Dihydro-5-methylfuran and schiff bases

The boron trifluoride catalyzed 1,4-addition of 2,3-dihydro-5-methylfuran to N-(p-methoxybenzylidene)-5-indanamine (VI) gave 2 pairs of epimers, dl-3,3a,4,5,7,8,9,10b-octahydro-4-(p-methoxyphenyl)-10b-methyl-2H-cyclopenta[g]furo[3,2-c]quinoline (VIIa and b) and dl-3,3a, 4,-5,8,9,10,10c-octahydro-4-(p-methoxyphenyl)-10c-methyl-2H-cyclopenta[f]furo[3,2-c]quinoline (VIIIa and b). When 4-(benzylideneamino)-1-naphthol (IXa) was condensed with 2,3-dihydro-5-methylfuran in an analogous manner, a mixture of two isomers of dl-1,2,2a,3,4,5a-hexahydro-5a-methyl-2-phenylbenzo[h]furo[3,2-c]quinolin-7-ol [Xa and b (R ? H)] was obtained. Likewise, 4-[(p-hydroxybenzylidene)amino]-1-naphthol (IXb) and 4-(p-methoxybenzylidene)amino]-1-naphthol (IXc) gave a mixture of two isomers of dl-1,2,2a,3,4,5a-hexahydro-2-(p-hydroxyphenyl)-5a-methylbenzo[h]furo[3,2-c]quinolin-7-ol [Xa and b (R ? OH)] and dl-1,2,2a,3,4,5a-hexahydro-2-(p-methoxyphenyl)-5a-methylbenzo [h]furo[3,2-c]quinolin-7-ol [Xa and b (R ? OCH₃)], respectively. The condensation of N-(p-methoxybenzylidene)-5-acenaphthenamine (XI) with 2,3-dihydro-5-methylfuran afforded a mixture of two isomers of dl-2,3,3a,4,5,9,10,-11b-octahydro-4-(p-methoxyphenyl)-11b-methylfuro[3,2-c]indeno[1,7-gh]quinoline (XIIa and b). Structural assignments for all of the products were made from NMR spectra. None of these compounds possessed appreciable biological activity.     

Development and validation of a differential scanning calorimetry purity determination method for polycyclic aromatic hydrocarbons

Based on a standard test method for purity by differential scanning calorimetry (DSC), ASTM E 928, a purity determination method for highly pure polycyclic aromatic hydrocarbons (PAHs) has been developed and validated. The robustness of the developed method was investigated by determining, under varying measurement conditions, the purity of two PAH certified reference materials (CRMs), benzo[c]phenanthrene and dibenzo[a,h]anthracene. The repeatability and intermediate precision of the developed method was determined by analysing the purity of benzo[c]phenanthrene and dibenzo[a,h]anthracene and PAH candidate CRMs indeno[1,2,3-c,d]pyrene, 6-methylchrysene and benzo[a]pyrene. The trueness of the method was studied using the same (candidate) CRMs and a series of 42 other PAH CRMs. For each of the five (candidate) CRMs, a full measurement uncertainty budget was developed. Also for PAH materials for which the DSC purity determination method has not been explicitly validated, the relative expanded measurement uncertainty was estimated.     

1,4-Cycloaddition reactions. II. Preparation of p-dioxino[2,3-g]furo[3,2-c] quinolines,p-dioxino[2,3-f] furo[3,2-c] quinolines,and [1,3] dioxolo[4,5-g] furo[3,2-c] quinolines from 2,3-dihydro-5-methylfuran and schiff bases

The boron trifluoride catalyzed 1,4-addition of 2,3-dihydro-5-methylfuran to N-(p-methoxy-benzylidene)-1,4-benzodioxan-6-amine (II) gave 2 pairs of epimers, 2,3,3a,4,5,8,9,11b-octahydro-4-(p-methoxyphenyl)-11b-methyl-p-dioxino[2,3-g]furo[3,2-c]quinoline (IIIa and b) and 2,3,7,8,8a,9.10,1la-octahydro-8-(p-methoxyphenyl)-11a-methyl-p-dioxino[2,3-f]furo[3,2-c]quinoline (IVa and b). When N-(p-methoxybenzylidene)-3,4-methylenedioxyaniline (V) was condensed with 2,3-dihydro-5-methylfuran in an analogous manner, a mixture of 2 epimers of 2,3,3a,4,5,10b-hexahydro-4-(p-methoxyphenyl)-10b-methyl[1,3]dioxolo[4,5-g]furo[3,2-c]quinoline (VIa and b) was isolated. Treatment of this mixture with sulfur afforded 6-(p-methoxyphenyl)-8-methyl-1,3-dioxolo[4,5-g]quinoline-7-ethanol (VIII). Structural assignments for all of the products were made from NMR spectra. None of the compounds possessed appreciable biological activity.     

Transition metal complexes with bidentate ligands spanning trans-positions. IV. Preparation and properties of some rhodium and iridium complexes of 2,11-bis(diphenylphosphinomethyl)benzo [c]phenanthrene

The bidentate phosphine 2,11-bis(diphenylphosphinomethyl)benzo [c]phenanthrene ( 1 ) has been used to prepare the mononuclear, square planar complexes trans-[MX(CO)( 1 )] and trans-[M(CO)(CH₃CN)( 1 )][BF₄] (M = Rh, Ir; X = Cl, Br, I, NCS). It is found that the tendency of these complexes to form adducts with CO, O₂ and SO₂ is significantly lower than that of the corresponding Ph₃P complexes. The oxidative-addition reactions of complexes trans-[IrX (CO) ( 1 )] with hydrogen halides give the six-coordinate species [IrHX₂(CO) ( 1 )]. The complexes [IrH₂I (CO) ( 1 )] and [IrH₂L (CO) ( 1 )] [BF₄] (L = CO and CH₃CN) have been obtained from hydrogen and the corresponding substrates. The model compounds trans-[MCl (CO) (Ph₂PCH₂Ph)₂] (M = Rh, Ir), trans-[Ir (CO) (CH₃CN) (Ph₂PCH₂Ph)₂] [BF₄], [IrHCl₂(CO)(Ph₂PCH₂Ph)₂] and [IrH₂(CO)₂(Ph₂PCH₂Ph)₂] [BF₄] have been prepared and their special parameters are compared with those of the corresponding complexes of ligand 1 . The influence of the static requirements of this ligand on the chemistry of its rhodium and iridium complexes is discussed.     

Transition-metal complexes with bidentate ligands spanning trans-position. Part XVI. X-ray structural and 31P-NMR solution studies of 2,11-Bis(diethylphosphinomethyl)benzo[c]phenanthrenesilver(I) perchlorate

The preparation of complexes {AgX(1c)} (X ? Cl, Br, I, NO₃ and ClO₄; 1c = 2,11-bis(diethylphosphinomethyl)benzo[c]phenanthrene) is reported. The ³¹P-NMR spectra of the above complexes were recorded and the ¹J(¹⁰⁷Ag, ³¹P) values are compared with the corresponding data for related complexes. The X-ray crystal structure of [Ag(1c)](ClO₄) was determined. There are two crystallographically independent molecules in the unit cell each containing two-coordinate silver, the O-atoms of the perchlorate anions being outside bonding range from the central atom. The two molecules, however, show different bonding parameters: Thus for ‘molecule 1’ P(1)? Ag(1)? P(2) = 167.6(1)°, Ag(1)? P(1) = 2.389(3) and Ag(1)? P(2) = 2.393(3) Å, while for ‘molecule 2’ P(3)? Ag(2)? P(4) = 164.8(1)°, Ag(2)? P(3) = 2.377(3), and Ag(2)? P(4) = 2.378(3) Å. These differences are probably due to packing forces in the crystal lattice.     

1,4-Cycloaddition reactions. III. Synthesis of furo[3,2-c]pyrido[2,3-g]quinolines,Furo[2,3-a] [4,7]phenanthrolines,Furo[3,2-c]pyrrolo[2,3-g]quinolines,Furo[3,2-c]pyrrolo[3,2-g]quinolines,and Furo[3,2-c]furo[2′,3′:4,5]pyrido[2,3-g]quinolines from 2,3-dihydro-5-methylfuran and schiff bases

The 1,4-cycloaddition of 2,3-dihydro-5-methylfuran (II) to 1-acetyl-1,2,3,4-te trahydro-6-[(p-hydroxybenzylidene)amino]quinoline (VIII) in the presence of boron trifluoride gave two pairs of epimers, namely dl-10-acetyl-2,3,3a,4,5,7,8,9,10,11b-decahydro-4-(p-hydroxyphenyl)-11b-methylfuro[3,2-c]pyrido[2,3-g]quinoline (IXa and b) and dl-8-acetyl-2,3,3a,4,5,8,9,10,11,-11c-decahydro-4-(p-hydroxyphenyl)-11c-methylfuro[2,3-a][4,7]phenanthroline (Xa and b). dl-9-Acetyl-3,3a,4,5,7,8,9,10b-octahydro-4-(p-hydroxyphenyl)-10b-methyl-2H-furo[3,2-c] pyrrolo-[2,3-g]quinoline (XIIIa) was the predominant product isolated from the reaction of II with 1-acetyl-5-[p-(hydroxybenzylidene)amino]indoline (XII). When 1-acetyl-6-[(p-hydroxybenzylidene)amino]indoline (XVI) was treated with 2,3-dihydro-5-methylfuran (II), two epimers of dl-7-acetyl-3,3a,4,5,7,8,9,10b-octahydro-4-(p-hydroxyphenyl)-10b-methyl-2H-furo[3,2-c]pyrrolo[3,2-g]quinoline (XVIIa and b) were obtained. dl-2,3,3a,4,5,6b,8,9,9a,10,11,12b-Dodecahydro-4,10-bis(p-methoxyphenyl)-6b,12b-dimethylfuro[3,2-c]furo[2′,3′:4,5]pyrido[2,3-g]quinoline (XX) was formed when 2,3-dihydro-5-methylfuran was allowed to react with N,N'-bis(p-methoxybenzylidene)-p-phenylcnediamine (XIX). Structure assignments were made from NMR spectra. None of the compounds exhibited appreciable biological activity.     

Heteroaromatic boron compounds. XV. Deuteriodeprotonation in some borazarothienopyridines and thienopyridines

Deuteriodeprotonation of some substituted 4,5-borazarothieno[2,3-c]pyridines (I) and 7,6-borazarothieno[3,2-c]pyridines (II) has been studied by the nmr technique. Exchange occurred predominantly in the 3-position, and the effect of methyl substitution on rate is discussed. The rates of exchange in some derivatives of I and II were compared with those of the isoelectronic thieno[2,3-c]pyridines (III) and thieno[3,2-c]pyridines (IV). Similar rates were obtained, confirming the aromatic nature of I and II. The deuteriodeprotonation of 4-methyl-4,5-borazaro-thieno[2,3-c]pyridine (Ie), 7-methyl-7,6-borazarothieno[3,2-c]pyridine (IIe), 4-methylthieno-[2,3-c]pyridine (IIIe), and 7-methylthieno[3,2-c]pyridine (IVe) were measured at different concentrations of deuteriosulfuric acid and different temperatures, showing that the protonated heterocycles are substrates in the deuteriodeprotonation reaction. Standard rates at p0 H and 100° were calculated for these systems.     

Furopyridines. XX. Wittig-horner reaction of a phosphonate of reissert analogues of furo[3,2-c]-, -[2,3-c]- and -[3,2-b]pyridines

Furo[3,2-c]-( 1a ), -[2,3-c]- ( 1b ) and -[3,2-b]pyridine ( 1c ) were reacted with isopropyl chloroformate and trimethyl phosphite to give dimethyl 5-isopropoxycarbonyl-4,5-dihydrofuro[3,2-c]pyridine-4-phosphonate ( 2a ), dimethyl 6-isopropoxycarbonyl-6,7-dihydrofuro[2,3-c]pyridine-7-phosphonate ( 2b ) and dimethyl 4-isopropoxycarbonyl-4,7-dihydrofuro[3,2-b]pyridine-7-phosphonate ( 2c ) as unstable syrups. Reaction of 2b and 2c with n-butyllithium and then with benzaldehyde, p-methoxybenzaldehyde, p-cyanobenzalde-hyde or propionaldehyde afforded the normal Wittig reaction products 5b-H, 5b-OMe, 5b-CN, 5b-Et, 5c-H, 5c-H, 5c-OMe and 5c-CN , except for 2b with propionaldehyde. While, the same reactions of compound 2a and the reaction of 2b with propionaldehyde afforded the unexpected products, 5-isopropoxycar-bonylfuro[3,2-c]pyridinio-4-aryl-(or ethyl)methoxides 3a-H, 3a-OMe, 3a-CN and 3a-Et , 4-(1′-aryl(or ethyl)-1′-hydroxymethyl)furo[3,2-c]pyridines 4a-H, 4a-OMe, 4a-CN and 4a-Et accompanying formation of the normal products. Treatment of the normal Wittig reaction products with lithium diisopropylamide and then with acetone gave the derivatives alkylated at the 2-or the benzylic positions.     

The syntheses of 4b,5a-dihydro-5H-benzo[3,4]-phenanthro[1,2-b]azirine and 1a,11b-dihydro-6,11-dimethyl-1H-benz[3,4]anthra[1,2-b]azirine

The syntheses of the K-imine derivatives of carcinogenic benzo[c]phenanthrene and 7,12-dimethylbenz-[a]anthracene are described. Treatment of trans-5-azido-5,6-dihydrobenzo[c]phenanthren-6-ol ( 3 ) and trans-6-azido-5,6-dihydrobenzo[c]phenanthren-5-ol ( 5 ) with thionyl chloride yielded the corresponding β-chloro azides, which in turn, were reacted with lithium aluminium hydride to give 4b,5a-dihydro-5H-benzo[3,4]-phenanthro[1,2-b]azirine ( 2 ). In a similar manner trans-5-azido-5,6-dihydro-7,12-dimethylbenz[a]anthracen-6-ol ( 11 ) and trans-6-azido-5,6-dihydro-7,12-dimethylbenz[a]anthracen-5-ol ( 13 ) were transformed to the respective chloro azides and, converted into 1a,11b-dihydro-6,11-dimethyl-1H-benz[3,4]anthra[1,2-b]azirine ( 10 ).     

Furopyridines. V. A simple synthesis of furo[2,3-c]pyridine and its 2-and 3-methyl derivatives

A simple synthesis of furo[2,3-c]pyridine and its 2- and 3-methyl derivatives from ethyl 3-hydroxyisonicotinate ( 2 ) is described. The hydroxy ester 2 was O-alkylated with ethyl bromoacetate or ethyl 2-bromopropionate to give the diester 3a or 3b . Cyclization of compound 3a afforded ethyl 3-hydroxyfuro [2,3-c]pyridine-2-carboxylate ( 4 ) which was hydrolyzed and decarboxylated to give furo[2,3-c]pyridin-3(2H)-one ( 5a ). Cyclization of 3b gave the 2-methyl derivative 5b . Reduction of 5a and 5b with sodium borohydride yielded the corresponding hydroxy derivative 6a and 6b , respectively, which were dehydrated with phosphoric acid to give furo[2,3-c]pyridine ( 7a ) and its 2-methyl derivative 7b . 4-Acetylpyridin-3-ol ( 8 ) was O-alkylated with ethyl bromoacetate to give ethyl 2-(4-acetyl-3-pyridyloxy) acetate ( 9 ). Saponification of compound 9 , and the subsequent intramolecular Perkin reaction gave 3-methylfuro[2,3-c]pyridine ( 10 ). Cyclization of 9 with sodium ethoxide gave 3-methylfuro[2,3-c]pyridine-2-carboxylic acid, which in turn was decarboxylated to give compound 10 .     

Synthesis of Benzo[c]thiophene Analogs Containing Benzimidazole,Benzothiazole, and Oxazole

Iodine-mediated cyclization of benzo[c]thiophene aldehyde with 1,2-diphenylamine/2-aminophenylthiol led to the formation of benzimidazole/benzothiazole-incorporated benzo[c]thiophenes. Similarly, reaction of benzo[c]thiophene aldehyde with p-toluenesulfonylmethyl isocyanide (TOSMIC) reagent in the presence of K₂CO₃ as a base furnished oxazole-containing benzo[c]thiophene analogs.     

Traceless Solid‐Phase Synthesis of Cyclopenta[c]quinolines and Cyclopenta[c]chromenes via Hetero [6+3] Cycloadditions of Fulvene. A Facile Approach to the 11‐Heterosteroids Framework

The hetero [6+3] cycloaddition of fulvenes to benzoquinones and iodoanilines provides an efficient route to the synthesis of cyclopenta[c]‐4H‐chromen‐8‐ol, benzo[d]cyclopenta[e]‐3H‐3‐azin‐8‐ol and other 11‐hetero steroids. The structure of the cyclopenta[c]chromene skeleton was confirmed by the X‐ray structure analysis of thep‐bromobenzoate of 39 . A small library consisting of 110 examples was prepared by reacting benzoquinones or iodoanilines with resin 17 .     

Transition-Metal Complexes with Bidentate Ligands Spanning trans-Positions. III. Preparation and solution studies of complexes [MX(1)] (M = Cu,Ag and Au; X = anionic ligand; 1 = 2, 11-bis(diphenylphosphinomethyl)benzo[c]phenanthrene)

The preparation of monomeric complexes [MX( 1 )] is reported where M = Cu, Ag, Au; X = I, Cl, NO₃, BF₄ and 1 = 2,11-bis(diphenylphosphinomethyl)benzo[c]phenanthrene. The solution structure of the complexes is discussed on the basis of molecular weight, conductivity and NMR. measurements. In acetonitrile and nitromethane, the nitrate and fluoroborate complexes exist as ionic species [M( 1 )]⁺X^? whereas the halo-complexes are present as equilibrium mixtures of ‘covalent’ and ‘ionic’ forms. All the complexes are associated in CH₂Cl₂-solutions. The values of ¹J show that this association in [Ag(NO₃) ( 1 )] and [Ag(BF₄) ( 1 )] is best described in terms of ion-pairing while that for species [AgX( 1 )] (X = Cl, Br and I) is mainly ‘covalent’ in nature. Evidence is presented for the formation of the complex ion [Ag(CH₃CN)_n( 1 )]⁺ in acetonitrile solution.