Interfacial composition and structural parameters of water/C12-s-C12 x 2Br/n-hexanol/n-heptane microemulsions studied by the dilution method

The interfacial composition of the stable water/C12-s-C12 x 2Br/n-hexanol/n-heptane microemulsions has been studied in detail by dilution method. The results showed a marked maximum amount of the n-hexanol populating on the surfaces of droplets (represented as a = n(a)i/n(s), where n(a)i and n(s) are respectively the moles of n-hexanol and gemini surfactant on the surface of droplets) with increasing water content. At a constant level of water addition (the molar ratio of water to surfactant W0 = 20), a decreased with increasing the spacer length in the C12-s-C12 x 2Br molecule. The structural parameters of a w/o microemulsion were also estimated by analyzing the data of dilution experiments, and we found that the radius of the water pool was very sensitive to the increment of water content. The radius of the water pool varied from 0.74 to 5.35 nm with increasing W0 from 10 to 50. The variation extent reached 4.61 nm. In the cases of water/CPC/n-butanol/isopropyl myristate and water/CTAB/n-butanol/isopropyl myristate, however, the corresponding variation extents were only 1.22 and 1.68 nm, respectively, when increasing comparable water content. The ratio of N(a)/N(2C), where N(a) and N(2C) are respectively the average numbers of n-hexanol and the total average numbers of alkyl chains of gemini surfactant populating on per droplet surface, decreased obviously with increasing water content at W0 > 15. This indicated that C12-2-C12 x 2Br favored to form large droplets that were suitable to solubilize more water.     

碳纳米管复合聚丙烯酸钠的制备及吸水性能

以过硫酸铵(APS)为引发剂,N,N′-亚甲基双丙烯酰胺(MBA)为交联剂,采用水溶液聚合法制备了碳纳米管/聚丙烯酸钠高吸水树脂。系统考察了碳纳米管质量分数、引发剂、交联剂和聚合温度对树脂吸水性能的影响。结果表明,以单体丙烯酸质量为基准,当交联剂,引发剂和碳纳米管质量分数分别为0.04%、0.3%和0.3%,聚合温度75℃时,所合成树脂的吸水性能最佳。添加碳纳米管后树脂表面粗糙和形成孔结构导致了其吸水性能的变化,使得碳纳米管/聚丙烯酸钠的吸水量和吸水速率明显提高,其吸去离子水和生理盐水能力分别达到1423和104g/g。该树脂重复吸水5次后,其吸水能力为1081.5g/g,达到最大吸水倍数的76.0%。     

Interfacial Behavior of Mixed Systems of Glycerylether-Modified Silicone and Polyoxyethylene-Modified Silicone

Undecylglycerylether-modified silicone (GES; the glycerylether-type surfactant with a silicone segment and alkyl chains (carbon number, 11) as the hydrophobic portion) forms a molecular aggregate (M.A.) with a small amount of water. This M.A. is similar to the reversed hexagonal liquid crystal formed by alpha-mono long-chain alkylglycerylether (3-isooctadecyloxy-1,2-propanediol; GE). From the investigation of the phase behavior in the water/GES/polydimethylsiloxane (PDMS) ternary system, a wide three-phase region of water (W)+M.A.+oil (O) was observed. As this M.A. is insoluble in PDMS and easily orients in the interface between water and PDMS, the high water content silicone W/O emulsion using GES as a surfactant is well stabilized. However, as the PDMS content increased this W/O emulsion became less stable. In order to improve this stability, mixtures of GES and polyoxyethylene-modified silicone (PS) were applied to the silicone emulsion as co surfactant. By application of a PS with a methyl group at the end cap of the polyoxyethylene chain (PSM), the emulsion became most stable at a GES/PSM ratio of 1 : 2, and at the same time, the interfacial tension between the oil phase and the water phase became minimal. The reason for this was studied by the measurement of spin-lattice relaxation times (T(1)) of the alkyl chains of GES in the GES/PS/water system by (13)C NMR. We assumed that the W/O silicone emulsions were stabilized by the efficient orientation of the aggregates in the interface between the silicone phase and the water phase by using PSM as a cosurfactant. Copyright 2001 Academic Press.     

Voltammetric study of interfacial electron transfer between bis(cyclopentadienyl)iron in organic solvents and hexacyanoferrate in water.

The electron-transfer reaction between bis(cyclopentadienyl)iron(II) ([Fe(II)(C5H5)2]) in nitrobenzene and a hexacyanoferrate redox couple ([Fe(II/III)(CN)6](4-/3-)) in water at the nitrobenzene / water interface was studied using normal pulse voltammetry. The voltammetric results indicate that the electron-transfer reaction takes place by way of a so-called ion-transfer (IT) mechanism, of which the forward and backward rate constants of the homogeneous electron-transfer reaction between [Fe(II/III)(C5H5)2](0/+) and [Fe(II/III)(CN)6](4-/3-) in the water phase have been determined. The electron-transfer reaction between [Fe(II)(C5H5)2] in 1,2-dichloroethane and [Fe(II/III)(CN)6](4-/3-) in water at the 1,2-dichloroethane / water interface was shown to also take place by the IT-mechanism.     

Determination of haloacetic acids in aqueous environments by solid-phase extraction followed by ion-pair liquid chromatography-electrospray ionization mass spectrometric detection.

Haloacetic acids (HAAs) were determined in different water samples by a new, fast and simple analysis method based on enrichment of 50-ml water samples at pH 1.8 by solid-phase extraction (SPE) followed by liquid chromatography (LC) separation and electrospray ionization mass spectrometric detection in the negative ionization mode. Deprotonated (M-H)-haloacetates and decarboxylated (M-COOH)- ions were detected. Different polymeric SPE sorbents were tested, and LiChrolut EN was found to be the best material for the extraction. Complete LC separation of all compounds could only be achieved by ion-pair chromatography using triethylamine as volatile ion-pairing reagent. The detection limits were in the low microg/l range. High microg/l concentration levels for the chlorinated and brominated haloacetates were found in drinking water from a drinking water treatment plant in Barcelona, and the corresponding tap water. In swimming pool water samples from Catalonia mg/l levels and in surface river water from Portugal microg/l values were detected. These results confirm other recent reports on the ubiquitous occurrence of HAAs in aqueous environments.     

W/O/W多重乳液中水传递的控制

建立了简化的W/O/W(水/油/水)多重乳液乳珠模型——统计平均半径模型, 预测出当W/O/W多重乳液内水相水滴之间以及内外水相之间均达到水传递平衡时的内外水相中盐的浓度, 从而实现对水传递的控制, 以维持W/O/W多重乳液的稳定. 按理论预测制备出了不同稳定态的W/O/W多重乳液, 利用差分扫描量热仪(DSC)检测了多重乳液中水的传递过程, 确定体系在实验状态下的稳定程度, 实验结果与理论预测基本吻合.     

Diffusion, relaxation, and chemical exchange in casein gels: a nuclear magnetic resonance study

Water in protein/water mixtures can be described in terms of bound water and free water, by exchange between these two states, and by its exchange with appropriate sites on the protein. 1H-NMR diffusion and relaxation measurements provide insights into the mobility of these states. T2 relaxation-time dispersions (i.e., T2 relaxation times at different echo pulse spacings) reveal additional information about exchange. We present a comprehensive set of diffusion and T2 dispersion measurements on casein gels for which the protein/water ratio ranges from 0.25 to 0.5. The combination of these methods, taken in conjunction with concentration dependence, allows a good estimate of the parameters required to fit the data with Luz/Meiboom and Carver/Richards models for relaxation and chemical exchange. We compare the exchange (a) between water and protein and (b) between free water and bound water. Further, we attempt to distinguish chemical site exchange and diffusion/susceptibility exchange.     

高效液相色谱-串联质谱法同时测定废水中18种酚类污染物

建立了上清液直接进样-高效液相色谱-串联质谱同时测定废水中18种酚类污染物的分析方法。取5.0 mL水样置于具塞离心管中,加氨水调节pH≥12,摇匀,加入1.0 mL二氯甲烷-正己烷(2: 1, v/v)混合溶液并振摇5 min, 4000 r/min离心5 min,用玻璃针筒抽取上清液并经0.22 μ m聚四氟乙烯滤膜过滤,用甲酸调节水样pH至中性;然后采用Thermo Hypersil ODS柱(100 mm×2.1 mm, 5.0 μ m)分离,以甲醇-0.01 mol/L甲酸铵-甲酸水溶液(pH 4.0)为流动相进行梯度洗脱,流速0.2 mL/min,柱温30℃,进样10 μ L,电喷雾负离子电离(ESI^-)模式、多反应监测(MRM)模式进行检测,外标法定量。18种酚类化合物的峰面积与其质量浓度在一定浓度范围内均呈良好的线性关系(r²≥0.9991),方法检出限为0.10~0.88 μ g/L。测定低、中、高加标浓度的样品,18种酚类化合物的相对标准偏差为2.5%~9.9%(n=6);火工药剂废水与石油化工废水样品中的平均加标回收率为68.7%~118%(n=3)。此方法操作简单,灵敏度高,干扰小,分析速度快,可适用于环境废水中18种酚类污染物的同时分析。     

Mechanisms of solvolyses of acid chlorides and chloroformates. Chloroacetyl and phenylacetyl chloride as similarity models

[reaction: see text] Rate constants and product selectivities (S = ([ester product]/[acid product]) x ([water]/[alcohol solvent]) are reported for solvolyses of chloroacetyl chloride (3) at -10 degrees C and phenylacetyl chloride (4) at 0 degrees C in ethanol/ and methanol/water mixtures. Additional kinetic data are reported for solvolyses in acetone/water, 2,2,2-trifluoroethanol(TFE)/water, and TFE/ethanol mixtures. Selectivities and solvent effects for 3, including the kinetic solvent isotope effect (KSIE) of 2.18 for methanol, are similar to those for solvolyses of p-nitrobenzoyl chloride (1, Z = NO(2)); rate constants in acetone/water are consistent with a third-order mechanism, and rates and products in ethanol/ and methanol/water mixtures can be explained quantitatively by competing third-order mechanisms in which one molecule of solvent (alcohol or water) acts as a nucleophile and another acts as a general base (an addition/elimination reaction channel). Selectivities increase for 3 as water is added to alcohol. Solvent effects on rate constants for solvolyses of 3 are very similar to those of methyl chloroformate, but acetyl chloride shows a lower KSIE, and a higher sensitivity to solvent-ionizing power, explained by a change to an S(N)2/S(N)1 (ionization) reaction channel. Solvolyses of 4 undergo a change from the addition/elimination channel in ethanol to the ionization channel in aqueous ethanol (<80% v/v alcohol). The reasons for change in reaction channels are discussed in terms of the gas-phase stabilities of acylium ions, calculated using Gaussian 03 (HF/6-31G(d), B3LYP/6-31G(d), and B3LYP/6-311G(d,p) MO theory).     

Comparative Study on the Structure of Water in Reverse Micelles Stabilized with Sodium Bis(2-ethylhexyl) Sulfosuccinate or Sodium Bis(2-ethylhexyl) Phosphate in n-Heptane

The microstructure of water solubilized in H(2)O/surfactant/n-heptane ternary systems has been investigated by employing (1)H-NMR and FT-IR spectroscopic techniques. Two reverse micellar systems were prepared and studied, i.e., sodium bis(2-ethylhexyl) sulfosuccinate in n-heptane (H(2)O/AOT/n-heptane) and sodium bis(2-ethylhexyl) phosphate in n-heptane (H(2)O/NaDEHP/n-heptane). (1)H-NMR data showed that the chemical shift of water protons for the AOT and NaDEHP reverse micelles varied downfield and upfield, respectively, with an increase of the water content. The opposite shift directions with increasing water content are interpreted as due to a composition change of the solubilized water associated with head-groups and sodium counterions in reverse micellar systems. On the basis of deconvolution results of FT-IR spectra, a four-component model is proposed to interpret the FT-IR and (1)H-NMR results. Copyright 2000 Academic Press.     

KBPh4由水到系列水-醇混合溶剂的迁移自由能

由于四苯硼盐在分析化学、生物学、电化学等各领域中的广泛用途及其大阴离子在研究与计算单个离子迁移热力学函数中所具有的特殊作用,人们对四苯硼盐的溶液热力学性质进行了广泛研究,特别是对四苯硼钠和可作为参考电解质的四苯硼盐进行了深入细致的研究 [1, 2],得到了一些重要的的结论,为溶液理论的研究提供了有力的实验基础 .但是文献中对难溶碱金属四苯硼盐由单一到不同混合溶剂中的迁移热力学性质的系统研究较少 .在前文 [3]对 KBPh4由水到水-异丙醇和由甲醇到甲醇-异丙醇混合溶剂的迁移自由能进行研究的基础上,我们系统地对 KB…     

甲苯对水/AOT/醇反相微乳液体系电导行为的影响

采用电导法研究了以二(2-乙基己基)琥珀酸酯磺酸钠(AOT)为表面活性剂、庚醇和癸醇分别与甲苯的混合溶剂为油相的反相微乳液体系在有无添加剂氯化钠时的电导行为。 结果表明,甲苯对水/AOT/癸醇体系电导渗滤有明显的抑制作用,而对水/AOT/庚醇体系没有影响;添加氯化钠对水/AOT/庚醇（癸醇）/甲苯体系的电导率基本无影响。     

氧化石墨烯基柔性发电机的构筑及其水蒸发发电性能

如何利用自然界广泛存在的水蒸发能是一个具有挑战性的课题。 以表面具有丰富官能团和优异亲水性的氧化石墨烯(GO)做发电材料,以肼还原制备的还原氧化石墨烯(RGO)作电极材料,通过简单滴注法在聚对苯二甲酸乙二酯(PET)衬底上构筑GO/RGO的柔性发电机,并研究其水蒸发诱导的发电性能。 结果表明,固定GO薄膜发电机的工作面积为4.5 cm×1.5 cm,以室温自然水蒸发为驱动力,可以输出90 mV的开路电势(V_oc)以及0.6 μA的短路电流(I_sc),最大功率密度可达1.25 μW/cm³。 该驱动器同时展示出优异的柔性和较高的稳定性。 通过控制体系的水蒸发发生与否,并基于经典流动电势理论,提出了水蒸发诱导的GO/RGO柔性发电机的发电机制。 提出了步骤简易、成本低廉、性能稳定的水蒸发驱动的发电机制备新思路,为新型水蒸发能的利用提供了新途径。     

Validation interlaboratory trial for ISO 12010: Water quality—Determination of short-chain polychlorinated alkanes (SCCP) in water

A validation interlaboratory trial was carried out to prepare ISO 12010: Water quality??Determination of short-chain polychlorinated alkanes (SCCP) in water??Method using gas chromatography/mass spectrometry (GC-MS) and electron capture negative ionisation (ECNI). The task was to determine the sum of short-chain polychlorinated n-alkanes with carbon chain lengths of C₁₀?CC₁₃ and a chlorine content between 49% (g/100?g) and 67% (g/100?g) in water by GC-ECNI-MS. The quantification had to be performed by multiple linear regression as described in ISO/DIS 12010, the compulsory method. Samples distributed were real river samples, and waste water spiked with a target concentration of 0.4 and 0.6???g/L for the sum of SCCPs, i.e. a concentration around the environmental quality target level according to the European Water Framework Directive. The different types of water samples tested were surface water with <150?mg/L suspended matter, surface water with 0.5?g/L suspended matter, and filtered waste waster. The interlaboratory trial included the extraction of the water samples, a column chromatographic clean up, a concentration step, and integration of chromatographic unresolved complex mixtures as well as the calibration and quantification by multiple linear regression. The reproducibility standard deviation of the standard concentration was 11.9%. Reproducibility standard deviations of concentrations in the three different water samples between 27.8 and 34.2% were achieved by 10?C12 participating laboratories from six countries.     

Development and features of hydro-membrane gas chromatography.

Hydro-membrane gas chromatography (HMGC) is achieved by the annular condensation of water in a capillary column at less than 70 degrees C. The annular membrane of water is formed as a result of the wettability of the stationary phase, which is induced at a water contact angle ranging from 75 degrees to 79 degrees, as derived from a solubility parameter (delta) range of 15.7 +/- 0.3 MPa(1/2) of the coated resin. The range of the liquid to gas volume ratio (beta) required to support the annular membrane should be kept between 0.00005 and 0.0003. In the case of a 0.25-mm i.d. column, the ratio can be set by the combination of a 0.1 to 0.2 microl min(-1) water supply rate and helium gas flow rate. Separation by HMGC develops not only a gas-solid partition but also a focusing effect on the water membrane. One feature of HMGC is that it gives a non-adsorption chromatogram based on the blocking effect of pre-adsorbed water; furthermore, despite the presence of a relatively large quantity of water, the electron impact ionization efficiency is kept the same as in the usual GC/MS condition. The detection limit with the injection of 1 microl of aquatic solution was estimated to be less than 0.1 ppb of low-molecular-weight fatty acids with s/n = 5 on a mass chromatogram at m/z 45. The HMGC/EI-MS system can be applied to the trace analysis of C1 to C3 volatile acids, volatile inorganic acids, and halogenated organic acids in water.     

Excess around a central molecule with application to binary mixtures

It was shown by us (J. Phys. Chem. B, 2006, 110, 12707) that the excess (deficit) of any species i around a central molecule j in a binary mixture is not provided by c(i)G(ij) (where c(i) is the molar concentration of species i in the mixture and G(ij) are the Kirkwood-Buff integrals) as usually considered and that an additional term, involving a volume V(j) which is inaccessible to molecules of species i because of the presence of the central molecule j, must be included. In this paper, the new expression is applied to various binary mixtures and used to establish a simple criterion for preferential solvation in a binary system. First, it is applied to binary Lennard-Jones fluids. The conventional expression for the excess (deficit) in binary mixtures, c(i)G(ij), provides always deficits around any central molecule in such fluids. In contrast, the new expression provides excess for one species and deficit for the other one. In addition, two kinds of binary mixtures involving weak (argon/krypton) and strong (alcohols/water) intermolecular interactions were considered. Again, the conventional expression for the excess (deficit) in a binary mixture, c(i)G(ij), provides always deficits for any central molecule in the argon/krypton mixture, whereas the new expression provides excess for argon (a somewhat smaller molecule) and deficit for krypton. Three alcohol/water binary mixtures (1-propanol/water, tert-butanol/water and methanol/water) with strong intermolecular interactions were considered and compared with the available experimental information regarding the molecular clustering in solutions. We found (for 1-propanol/water and tert-butanol/water) a large excess of alcohols around a central alcohol molecule and a large excess of water around a central water molecule. For both mixtures the maximum of the calculated excess with respect to the concentration corresponds to the maximum in the cluster size found experimentally, and the range of alcohol concentrations in which the calculated excess becomes very small corresponds to the composition range in which no clusters could be identified experimentally.     

Reversible light-driven redox switching of multifunctional dipolar ruthenium(III/II) pentaammine(4,4'-bipyridinium) complexes

We report the first example of a molecular switch of multifunctional dipolar ruthenium(III/II) pentaammine-N-methyl-(4,4'-bipyridinium) complexes, exclusively driven by light. This is achieved by using a two-phase (water/benzene) system in which RuIII/II complexes are soluble only in the water phase. The reversible redox switching is triggered by the selective irradiation of the water and the benzene compartments with 254 and 528 nm light, respectively.     

Weakly and strongly associated nonfreezable water bound in bones

Water bound in bone of rat tail vertebrae was investigated by ¹H NMR spectroscopy at 210–300 K and by the thermally stimulated depolarization current (TSDC) method at 190–265 K. The ¹H NMR spectra of water clusters were calculated by the GIAO method with the B3LYP/6-31G(d,p) basis set, and the solvent effects were analyzed by the HF/SM5.45/6-31G(d) method. The ¹H NMR spectra of water in bone tissue include two signals that can be assigned to typical water (chemical shift of proton resonance δ_H = 4–5 ppm) and unusual water (δ_H = 1.2–1.7 ppm). According to the quantum chemical calculations, the latter can be attributed to water molecules without the hydrogen bonds through the hydrogen atoms, e.g., interacting with hydrophobic environment. An increase in the amount of water in bone leads to an increase in the amount of typical water, which is characterized by higher associativity (i.e., a larger average number of hydrogen bonds per molecule) and fills larger pores, cavities and pockets in bone tissue.     

Viscosity of the aqueous liquid/vapor interfacial region: 2D electrochemical measurements with a piperidine nitroxy radical probe

Surface partitioning of 2,2,6,6-tetramethyl-1-piperidynyloxy radical (Tempo) to the air/water interface follows a Langmuir isotherm. The partition constant was obtained by the surface tension measurements in the concentration range of 1.0 x 10(-4)-2.4 x 10(-3) M yielding K = 640 +/- 99 M(-1). The lateral mobility of Tempo at the air/water interface was measured electrochemically in the surface concentration range of 2.0 x 10(-11)-1.4 x 10(-10) mol/cm2, corresponding to ca. 7.3-50% full monolayer coverage. The measurements employed cyclic voltammetry with line microelectrodes touching the air/water interface. The Tempo lateral diffusion constant of (1.5 +/- 0.7) x 10(-4) cm2/s is independent of surface concentration below 4.0 x 10(-11) mol/cm2. The extent of Tempo water interactions was assessed by the electronic structure calculations. These calculations showed that, at most, two water molecules can hydrogen bond with the oxygen atom of the nitroxyl group of Tempo, and that a single water molecule forms a hydrogen bond that is ca. 30% stronger than the H2O-H2O hydrogen bond. These calculations led to a postulate that Tempo diffuses along the interface largely unimmersed, and that it is coupled to the interfacial water via hydrogen bonding with H2O. In view of this postulate, the viscosity of the aqueous liquid/vapor interfacial region obtained by interpreting the Tempo diffusion constant in the low concentration region is as much as 4 times smaller than that of bulk liquid water.