Metal layered zeolite catalysts for NOx abatement in lean exhaust gas conditions

Metal layered ZSM-5 zeolites ion-exchanged with copper are effective catalysts in NO_x abatement in lean automotive exhaust gas conditions. The effective ion-exchange level of Cu is above 100%, and some co-cations improve the catalytic activity. The thermal stability of the catalyst can be improved with Cr as a co-cation.     

Non‐Thermal Plasma Activation of Gold‐Based Catalysts for Low‐Temperature Water–Gas Shift Catalysis

Non‐thermal plasma activation has been used to enable low‐temperature water‐gas shift over a Au/CeZrO₄ catalyst. The activity obtained was comparable with that attained by heating the catalyst to 180 °C providing an opportunity for the hydrogen production to be obtained under conditions where the thermodynamic limitations are minimal. Using in situ diffuse reflectance infrared Fourier transform spectroscopy (DRIFTS), structural changes associated with the gold nanoparticles in the catalyst have been observed which are not found under thermal activation indicating a weakening of the Au−CO bond and a change in the mechanism of deactivation.     

Application of Li2SiO3 as a heterogeneous catalyst in the production of biodiesel from soybean oil

Biodiesel was synthesized from soybean oil by transesterification over Li₂SiO₃ catalyst.The Li₂SiO₃ can be used for biodiesel production directly without further drying or thermal pretreatment,no obvious difference in the FAME conversion（92.4-96.7%） between the air-exposed catalyst（24-72 h） and the fresh one（94.2%）.This leads to important benefits when considering industrial applications of Li₂SiO₃ as a solid catalyst for storing and handling catalyst without taking special actions.     

MgFe<Subscript>2</Subscript>O<Subscript>4</Subscript>/cellulose/SO<Subscript>3</Subscript>H nanocomposite: a new biopolymer-based nanocatalyst for one-pot multicomponent syntheses of polysubstituted tetrahydropyridines and dihydropyrimidinones

A new biopolymer cellulose-based magnetic heterogeneous catalyst, MgFe₂O₄/cellulose/SO₃H nanocomposite, was prepared. Fourier-transform infrared spectra, X-ray diffraction, energy-dispersive X-ray, field-emission scanning electron microscopy, thermal analysis (TG, DTG and DSC), dynamic light scattering and vibrating sample magnetometer measurements have been used to characterize the catalyst. Then, it was applied efficiently as an inexpensive and green catalyst in two multicomponent syntheses of polysubstituted tetrahydropyridines and dihydropyrimidinones under solvent-free conditions. The nanocatalyst can be recovered and reused several times without significant loss of catalytic activity.     

Low‐Temperature Growth of Carbon Nanotubes Catalyzed by Sodium‐Based Ingredients

Synthesis of low‐dimensional carbon nanomaterials such as carbon nanotubes (CNTs) is a key driver for achieving advances in energy storage, computing, and multifunctional composites, among other applications. Here, we report high‐yield thermal chemical vapor deposition (CVD) synthesis of CNTs catalyzed by reagent‐grade common sodium‐containing compounds, including NaCl, NaHCO₃, Na₂CO₃, and NaOH, found in table salt, baking soda, and detergents, respectively. Coupled with an oxidative dehydrogenation reaction to crack acetylene at reduced temperatures, Na‐based nanoparticles have been observed to catalyze CNT growth at temperatures below 400 °C. Ex situ and in situ transmission electron microscopy (TEM) reveal unique CNT morphologies and growth characteristics, including a vaporizing Na catalyst phenomenon that we leverage to create CNTs without residual catalyst particles for applications that require metal‐free CNTs. Na is shown to synthesize CNTs on numerous substrates, and as the first alkali group metal catalyst demonstrated for CNT growth, holds great promise for expanding the understanding of nanocarbon synthesis.     

Non-Thermal Plasma Activation of Gold-Based Catalysts for Low-Temperature Water–Gas Shift Catalysis

Non-thermal plasma activation has been used to enable low-temperature water-gas shift over a Au/CeZrO₄ catalyst. The activity obtained was comparable with that attained by heating the catalyst to 180 °C providing an opportunity for the hydrogen production to be obtained under conditions where the thermodynamic limitations are minimal. Using in situ diffuse reflectance infrared Fourier transform spectroscopy (DRIFTS), structural changes associated with the gold nanoparticles in the catalyst have been observed which are not found under thermal activation indicating a weakening of the Au−CO bond and a change in the mechanism of deactivation.     

Removal of NOx by photocatalytic processes

The photocatalytic methods for nitrogen oxides removal were recently very intense areas of scientific research. Photo-deNO_x processes offer interesting ways for abatement of these harmful gases. This review describes several methods for removing NO by photocatalytic reactions. These methods can be classified into three major groups: photo selective catalytic reduction (photo-SCR), photo-oxidation and photo-decomposition. The application of photocatalysts and photo-processes for NO_x abatement in real-scale cases are presented. The fast-growing development of these methods is revealed by the large number of issued patents in photo-deNO_x applications. The mechanism of NO creation and the traditional methods (primary and secondary) of NO_x removal are summarized and discussed. A cooperative system that combines the traditional (thermal) process and a photo-process is then proposed for improving NO_x removal efficiency.     

Highly Stable Mesoporous Zirconium Porphyrinic Frameworks with Distinct Flexibility

The construction of highly stable metal–porphyrinic frameworks (MPFs) is appealing as these materials offer great opportunities for applications in artificial light‐harvesting systems, gas storage, heterogeneous catalysis, etc. Herein, we report the synthesis of a novel mesoporous metal–porphyrinic framework (denoted as NUPF‐1) and its catalytic properties. NUPF‐1 is constructed from a new porphyrin linker and a Zr₆O₈ structural building unit, possessing an unprecedented doubly interpenetrating scu net. The structure exhibits not only remarkable chemical and thermal stabilities, but also a distinct structural flexibility, which is seldom seen in metal–organic framework (MOF) materials. By the merit of high chemical stability, NUPF‐1 could be easily post‐metallized with [Ru₃(CO)₁₂], and the resulting {NUPF‐1–RuCO} is catalytically active as a heterogeneous catalyst for intermolecular C(sp³)?H amination. Excellent yields and good recyclability for amination of small substrates with various organic azides have been achieved.     

Efficient Multi‐component Synthesis of Highly Substituted Imidazoles Utilizing P2O5/SiO2 as a Reusable Catalyst

Phosphorus pentoxide supported on silica gel (P₂O₅/SiO₂) has been used as an efficient and reusable catalyst for the one‐pot pseudo four‐component synthesis of 2,4,5‐trisubstituted imidazoles from benzil or benzoin, aldehydes, and ammonium acetate. It was also used for four‐component preparation of 1,2,4,5‐tetrasubstituted imidazoles from benzil or benzoin, aldehydes, primary amine, and ammonium acetate under thermal solvent‐free conditions. The remarkable features of this new procedure are high conversions, cleaner reaction, simple experimental and work‐up procedures and also the catalyst can be easily separated from the reaction mixture and reused several times without any loss of its activity.     

On the crystal structure of heterogeneous catalysts at reaction-conditions: “in-situ” X-ray powder diffraction

In the field of heterogeneous catalysis there is an increasing need for the X-ray diffraction of catalyst compounds at elevated temperatures, especially under atmospheres comparable to those used in industrial applications. An “in-situ” diffraction system is presented which has a built-in high temperature chamber suitable for the use of inert (N₂, Ar), oxidising (O₂), reducing (H₂) or organic atmospheres. This has been combined with a mass spectrometer for evolved gas analysis. Investigations of the thermal decomposition of silver(I)oxide (Ag₂O) and the behaviour of the heteropoly catalyst H₄[PVMo₁₁O₄₀] · n H₂O during the oxydehydrogenation of isobutyric acid clearly show the usefulness of the presented apparatus.     

Thermal hazards evaluation of cumene hydroperoxide mixed with its derivatives

Over 90% of the cumene hydroperoxide (CHP) produced in the world is applied in the production of phenol and acetone. The additional applications were used as a catalyst, a curing agent, and as an initiator for polymerization. Many previous studies from open literature have verified and employed various aspects of the thermal decomposition and thermokinetics of CHP reactions. An isothermal microcalorimeter (thermal activity monitor III, TAM III), and a thermal dynamic calorimetry (differential scanning calorimetry, DSC) were used to resolve the exothermic behaviors, such as exothermic onset temperature (T ₀), heat power, heat of decomposition (ΔH _d), self-heating rate, peak temperature of reaction system, time to maximum rate (TMR), etc. Furthermore, Fourier transform infrared (FT-IR) spectrometry was used to analyze the CHP products with its derivatives at 150 °C. This study will assess and validate the thermal hazards of CHP and incompatible reactions of CHP mixed with its derivatives, such as acetonphenone (AP), and dimethylphenyl carbinol (DMPC), that are essential to process safety design.     

新型层状有机聚合物-无机杂化磷酸铝(AlPS-PVPA)催化剂载体材料的合成及表征

以苯乙烯-苯乙烯基膦酸共聚物、磷酸二氢钠作磷(膦)源,在温和的条件下,通过调节有机膦酸和无机磷酸的比例,合成了一系列不同化学计量比的聚(苯乙烯-苯乙烯基膦酸)-磷酸铝有机聚合物-无机杂化材料。通过FTIR、TG、N2吸附、XRD、SEM和TEM等表征手段对其进行了表征,并提出了其理想的结构模型。结果表明,这类杂化材料具有规则的层状结构和较高的热稳定性,作为催化剂载体具有潜在的应用价值。     

Nano-cellulose-OSO<Subscript>3</Subscript>H as a new,green, and effective nano-catalyst for one-pot synthesis of pyrano [4,3-<Emphasis Type="Italic">b</Emphasis>] pyrans

A facile, green, and efficient method has been developed for the synthesis of biologically important pyrano [4,3-b] pyrans in the presence of nano-cellulose-OSO₃H as a new solid acid catalyst. The reaction involves the use of 4-hydroxy-6-methyl-2H-pyran-2-one, malononitrile, and aldehydes. A wide range of aldehydes is compatible in this reaction, producing excellent yields in short time. The morphology of nano-catalyst (nano-cellulose-OSO₃H) was observed using a scanning electron microscopy (SEM). The cellulose-OSO₃H surface was studied by the energy dispersive X-ray spectroscopy (EDX) method to find out the chemical composition. The decomposition steps and thermal stability of the catalyst were investigated by thermal analysis techniques (TGA/DTG). In addition, the vibrational spectrum analysis (FT-IR) and X-ray diffractogram (XRD) of the catalyst have been performed.     

MCM-41-anchored sulfonic acid (MCM-41-SO3H): An efficient heterogeneous catalyst for green organic synthesis

MCM-41-anchored sulfonic acid (MCM-41-SO₃H) used as a solid acid catalyst has been reported in recent years for various synthetic protocols. The superior advantage of MCM-41-SO₃H is that it can be recovered and reused several times without loss of its efficiency. In this tutorial review, we attempt to give an overview of the use of MCM-41-SO₃H as a solid and heterogeneous catalyst in the synthesis of various organic compounds that have industrial and pharmaceutical applications.     

Fe3O4@NCs/BF0.2: A magnetic bio‐based nanocatalyst for the synthesis of 2,3‐dihydro‐1H‐perimidines

Nanocellulose (NC) materials have some unique properties, which make them attractive as organic or inorganic supports for catalytic applications. Nanocatalysts with diameters of less than 100 nm are difficult to separate from the reaction mixture, therefore, magnetic nanoparticles (MNPs) were used as catalysts to overcome this problem. Fe₃O₄@NCs/BF_0.2 as a green, bio‐based, eco‐friendly, and recyclable catalyst was synthesized and characterized using fourier‐transform infrared spectroscopy (FT‐IR), vibrating sample magnetometer (VSM), X‐ray diffraction (XRD), X‐ray fluorescence (XRF), Brunauer–Emmett–Teller (BET), field emission scanning electron microscopy (FESEM), transmission electron microscopy (TEM), and thermal gravimetric analysis (TGA) techniques. Fe₃O₄@NCs/BF_0.2 was employed for the synthesis of 2,3‐dihydro‐1H‐perimidine derivatives via a reaction of 1,8‐diaminonaphthalene with various aldehydes at room temperature under solvent‐free conditions. The present procedure offers several advantages including a short reaction time, excellent yields, easy separation of catalyst, and environmental friendliness.     

Synthesis of New and Novel N-Protected 1-Aminoalkyl-2-naphthol Derivatives

A series of three-component reactions has been carried out using HClO₄-SiO₂ as a versatile heterogeneous catalyst. A series of new and novel N-protected 1-aminoalkyl-2-naphthol derivatives have been prepared under thermal solvent-free reaction conditions. In all cases, the reaction conditions were very simple and high-yielding.     

Hydrogen storage and delivery: immobilization of a highly active homogeneous catalyst for the decomposition of formic acid to hydrogen and carbon dioxide

The homogeneous catalytic system, based on water-soluble ruthenium(II)–TPPTS catalyst (TPPTS = meta-trisulfonated triphenylphosphine), selectively decomposes HCOOH into H₂ and CO₂ in aqueous solution. Although this reaction results in only two gas products, heterogeneous catalysts could be advantageous for recycling, especially for dilute formic acid solutions, or for mobile, portable applications. Several approaches have been used to immobilize/solidify the homogeneous ruthenium–TPPTS catalyst based on ion exchange, coordination and physical absorption. The activity of the various heterogeneous catalysts for the decomposition of formic acid has been determined. These heterogenized catalysts offer the advantage of easy catalyst separation/recycling in dilute formic acid, or for mobile, portable applications.     

Homopolymerization and copolymerization of vinyl chloride over supported metalorganic catalysts

The homopolymerization of vinyl chloride and its copolymerization with ethylene over dibutyl ether–modified SiO₂-supported Ziegler–Natta catalysts based on titanium and vanadium chlorides have been studied. The supported metal complexes are sufficiently active in the polymerization of vinyl chloride. Their activity depends on the catalyst composition and conditions of formation of the catalyst on the surface of the support. The chain structure of the resulting polyvinyl chloride (PVC) has been studied by NMR spectroscopy. The thermal properties of the synthesized PVC have been investigated by differential scanning calorimetry. The PVC obtained possesses enhanced thermal stability owing to the specific features of its chain structure. Vinyl chloride polymerization over the supported metalorganic catalyst proceeds mainly via a free-radical mechanism. Process conditions have been found for conducting the copolymerization of vinyl chloride with ethylene over supported metal complexes resulting in the formation of true statistical copolymers, which is confirmed by IR and NMR spectroscopy.     

Novel polymeric chelates of 8-hydroxyquinoline-dimethylolacetone

A new chelating copolymer (HQDMA) has been synthesized through copolymerization of 8-hydroxyquinoline and dimethylolacetone monomers in the presence of base as a catalyst. This newly developed copolymer ligand (H₂L) has been used to prepare a series of five polymeric chelates (ML) by using Zn(II), Cu(II), Ni(II), Co(II) and Mn(II) metal ions. Both the parent ligand and its metal chelates have been systemically investigated in detail to elucidate the chemical structure and thermal behaviour by elemental analyses, spectral (IR and electronic) characterization, number-average molecular mass determination and thermogravimetric analysis (TG). In addition to these, magnetic susceptibility measurements have also been carried out for studying geometry and metal-ligand stoichiometry of polymeric chelates. The chemical structure of polychelates on the basis of elemental and IR characterization suggests that the bidentate ligand (H₂L) coordinates to metal ions through oxygen atom of the phenolic hydroxyl group by replacing hydrogen atom and nitrogen of the quinoline ring. The studies of magnetic moments and electronic spectra reveal that all polychelates with octahedral geometry are paramagnetic in nature except that of Zn(II) chelate, which is diamagnetic. The thermogravimetric analysis of parent ligand and its metal chelates have shown remarkable difference in mode of thermal decomposition and their thermal stabilities. The kinetic parameter, energy of activation (E _a) of thermal decomposition has also been estimated by Broido method.     

Fe3O4‐SAHPG‐Pd0 nanoparticles: A ligand‐free and low Pd loading quasiheterogeneous catalyst active for mild Suzuki–Miyaura coupling and C?H activation of pyrimidine cores

This paper reports a green magnetic quasiheterogeneous efficient palladium catalyst in which Pd⁰ nanoparticles have been immobilized in self‐assembled hyperbranched polyglycidole (SAHPG)‐coated magnetic Fe₃O₄ nanoparticles (Fe₃O₄‐SAHPG‐Pd⁰). This catalyst has been used for effective ligandless Pd catalyzed Suzuki–Miyaura coupling reactions of different aryl halides with substituted boronic acids at room temperature and in aqueous media. Herein, SAHPG is used as support; it also acts as a reducing agent and stabilizer to promote the transformation of Pd^II to Pd⁰ nanoparticles. Also, this environmental friendly quasiheterogeneous catalyst is employed for the first time in the synthesis of new pyrimido[4,5‐b]indoles via oxidative addition/C? H activation reactions on the pyrimidine rings, which were obtained with higher yield and faster than when Pd(OAc)₂ was used as the catalyst. Interestingly, the above‐mentioned catalyst could be recovered in a facile manner from the reaction mixture by applying an external magnet device and recycled several times with no significant decrease in the catalytic activity.