CdTe量子点荧光法测定阳离子表面活性剂

合成了巯基乙酸(TGA)保护的水溶性发光CdTe量子点,并考察了此探针在阳离子表面活性剂十六烷基三甲基溴化铵(CTMAB)中的发光行为。根据观察到的发光猝灭效应,建立了一种简单的测定阳离子表面活性剂的方法。考察了CdTe量子点的浓度、体系酸度、反应时间及共存物质等对测定的影响。在最佳条件下,CdTe量子点发光强度与CTMAB的浓度分别在6×10-7~9.0×10-6mol/L和1.2×10-5~3.8×10-5mol/L范围内分段成线性关系。该方法用于水样的阳离子表面活性剂的测定,回收率为97%~102%。     

Surface-modified CdS quantum dots as luminescent probes for sulfadiazine determination

A novel, sensitive and convenient determine technology based on the quenching of the fluorescence intensity of functionalized CdS quantum dots by sulfadiazine was proposed. Luminescent CdS semiconductor quantum dots (QDs) modified by thioglycollic acid (TGA) were synthesized with the microwave method. The modified CdS QDs are water-soluble, stable and highly luminescent. The possible mechanism for the reaction was also discussed. When sulfadiazine was added into the CdS QDs colloid solution, the surface of CdS QDs generates the electrostatic interaction in aqueous medium, which induces the quenching of fluorescence emission at 489 nm. Under optimum condition, the fluorescence intensity versus sulfadiazine concentration gave a linear response according Stern-Volmer equation with an excellent 0.9981 correlation coefficient. The linearity range of the calibration curve was 1.2 x 10(-5) to 2.13 x 10(-3) mol L(-1). The limit of detection (3delta) is 8.0 micromol L(-1). The relative standard deviation for five determinations of 0.13 x 10(-3)mol L(-1) sulfadiazine is 1.4%. The concentrations of sulfadiazine injections were determined by the proposed method with a satisfactory result.     

CdTe quantum dots functionalized with 4-amino-2,2,6,6-tetramethylpiperidine-N-oxide as luminescent nanoprobe for the sensitive recognition of bromide ion

A novel bromide ion-selective modified nanoprobe sensor based on 4-amino-2,2,6,6-tetramethylpiperidine-N-oxide (4AT)-functionalized CdTe quantum dots (QDs-4AT) has been developed. Fluorescence quenching of the QDs by 4AT was observed. The functionalized QDs-4AT nanoprobe allowed a highly sensitive determination of bromide ion via analyte-induced change in the photoluminescence (fluorescence recovery) of the modified QDs. A detection limit of 0.6 nM of bromide ion was obtained, while the interfering effect of other inorganic cations and anions was investigated to examine the selectivity of the nanoprobe. The linear range was between 0.01 and 0.13 μM. Combined fluorescence lifetime and electron paramagnetic resonance measurements confirmed electron transfer processes between bromide ion and QDs-4AT.     

CdTe量子点荧光探针测定氯霉素含量的研究

在水溶液体系中制备出了具有高质量荧光性能,巯基乙酸(TGA)修饰的CdTe量子点(QDs),基于量子点与氯霉素混合后发生荧光猝灭作用,建立CdTe量子点作为荧光探针测定氯霉素的新方法。在Tris-HCl缓冲液(pH 7.00,0.10 mol·L-1)中,反应时间为10min时,氯霉素浓度在10～70μg·mL-1范围内与CdTe量子点的荧光猝灭程度呈良好的线性关系,相关系数为0.9981,检出限为0.799μg.mL-1。方法简便快速,灵敏度高,可用于实际样品中氯霉素的检测。     

水溶性CdTe量子点的合成及其用于荧光猝灭法测定肌红蛋白

以3-巯基丙酸为稳定剂,合成了具有特殊光学性质的水溶性CdTe量子点,其最大发射波长位于544 nm.利用荧光光谱、紫外可见光谱及圆二色光谱法系统的研究了CdTe量子点与肌红蛋白(Mb)二者结合前后体系光谱的变化,从而证实了CdTe量子点与Mb之间静电结合反应的特征.在pH 7.0的PBS缓冲液中,用CdTe量子点作为荧光探针研究了肌红蛋白与量子点的相互作用,并基于肌红蛋白对CdTe量子点有显著的荧光猝灭作用,建立了肌红蛋白的快速检测方法.在最佳实验条件下,该体系荧光强度的猝灭程度(△F)与肌红蛋白质量浓度呈良好的线性关系,线性范围为0.3～24 μg/mL,检出限为0.13 μg/mL.该方法已对合成样品中肌红蛋白进行检测,并用于人体尿样中肌红蛋白的测定.     

CdSe quantum dots as luminescent probes for spironolactone determination

Based on the quenching of the fluorescence of CdSe quantum dots (QDs) by spironolactone, a simple, rapid and specific method for spironolactone determination was proposed. In the optimum conditions, spironolactone concentration versus quantum dot fluorescence gave a linear response with an excellent 0.997 correlation coefficient, between 2.5 and 700 mg/mL (6.0-1680 μmol/L) and the limit of detection (S/N = 3) was 0.2 μg/mL (0.48 μmol/L). The contents of spironolactone in pharmaceutical tablets were determined by the proposed method and the results agreed with the claimed values. The possible mechanism for the reaction was also discussed.     

The preparation of glutathione-capped CdTe quantum dots and their use in imaging of cells

In this paper, different sizes of glutathione-capped CdTe (GSH/CdTe) quantum dots (QDs) have been prepared directly in aqueous solution. The QDs have tunable fluorescence in the range of 510-670 nm, and they also have high photoluminescence quantum yield (PLQY) without any postpreparative treatment. Furthermore, the QDs have strong resistance to photobleaching, and they also have to be considered as cytocompatible. In addition, for the first time, folic acid was covalently conjugated to the GSH/CdTe QDs for imaging of cancer cells, demonstrating their potentially broad application as biolabels.     

CdTe/CdS荧光探针测定痕量铜(Ⅱ)

以巯基乙酸为稳定剂,在水溶液中合成CdTe/CdS量子点,基于量子点与Cu2+混合后发生荧光猝灭作用,建立CdTe/CdS量子点作为荧光探针检测微量铜的新方法。在pH 4.60的HAc-NaAc缓冲溶液中,反应时间为10 min时,Cu2+质量浓度在0.01～1.00μg/mL范围与CdTe/CdS量子点的荧光猝灭程度呈良好的线性关系,相关系数为0.9978,检出限为9.90×10-3μg/mL。方法可以用于雨水、自来水和延河水中Cu2+的分析。     

CdTe量子点荧光猝灭法测定奥沙利铂中微量银

以谷胱甘肽作为稳定剂,100℃恒温回流,直接合成水溶性CdTe量子点。基于Ag+对合成的CdTe量子点的荧光猝灭效应,建立了测定抗癌药物奥沙利铂中微量银的方法。考察了量子点浓度、缓冲液种类、缓冲液浓度、缓冲液pH和反应时间对银离子测定的影响。当量子点浓度为0.004 g/L时,在0.10 mmol/LpH7.4的磷酸缓冲溶液中,反应时间为5 min,体系的相对荧光强度与Ag+的质量浓度呈良好的线性关系,其线性范围为16.42～98.50μg/L,线性相关系数为0.9975,检出限为0.12μg/L。     

Surface-modified CdSe quantum dots as luminescent probes for cyanide determination

Luminescent surface-modified CdSe semiconductor quantum dots (QDs), with nanoparticle (NP) size distribution in the order of 2-7 nm, have been synthesized for optical determination of cyanide ions. The nanoparticles have been functionalised with tert-butyl-N-(2-mercaptoethyl)-carbamate (BMC) groups and exhibit a strong fluorescent emission at about 580 nm with rather long fluorescence lifetimes (several hundred nanoseconds) in aerated methanolic solution. The observed luminescence emitted by the synthesized nanocrystals was tremendously increased by photo-activation under sunlight exposure. The functionalised QDs turned out to exhibit excellent long-term stability when stored in the dark (no significant changes in QDs luminescence emission intensity was observed even after two months from synthesis). The functionalisation of the NPs with carbamate ligand allowed a highly sensitive determination of free cyanide via analyte-induced changes in the photoluminescence (fluorescence quenching of intensity at 580 nm and lifetime changes) of the modified quantum dots (excited at 400 nm). A detection limit of 1.1 × 10⁻⁷ M (2.9 μg l⁻¹) of cyanide ions was obtained, while the interfering effect of other inorganic anions (including NO₃⁻, Cl⁻ or SCN⁻) was negligible even at 200-fold level concentrations in excess of cyanide.     

Temperature-dependent photoluminescence of highly luminescent water-soluble CdTe quantum dots

Highly luminescent water-soluble CdTe quantum dots(QDs) have been synthesized with an electrogenerated precursor.The obtained CdTe QDs can possess good crystallizability,high quantum yield(QY) and favorable stability.Furthermore,a detection system is designed firstly for the investigation of the temperature-dependent PL of the QDs.     

Synthesis of cysteamine-coated CdTe quantum dots and its application in mercury (II) detection

High-quality cysteamine-coated CdTe quantum dots (CA-CdTe QDs) were successfully synthesized in aqueous phase by a facile one-pot method. Through hydroxylamine hydrochloride-promoted kinetic growth strategy, water-soluble CA-CdTe QDs could be obtained conveniently in a conical flask by a stepwise addition of raw materials. The photoluminescence quantum yield (PL QY) of the obtained QDs reached 9.2% at the emission peak of 520 nm. The optical property and the morphology of the QDs were characterized by UV–vis absorption spectra, photoluminescence spectra (PL) and transmission electron microscopy (TEM) respectively. Furthermore, the fluorescence of the resultant QDs was quenched by copper (II) (Cu²⁺) and mercury (II) (Hg²⁺) meanwhile. It is worthy of note that to separately detect Hg²⁺, cyanide ion could be used to eliminate the interference of Cu²⁺. Under the optimal conditions, the response was linearly proportional to the logarithm of Hg²⁺ concentration over the range of 0.08–3.33 μM with a limit of detection (LOD) of 0.07 μM.     

栀子甙对碲化镉量子点的荧光淬灭作用

以3-巯基丙酸作为稳定剂,在水溶液中合成了CdTe量子点;采用荧光光谱法初步研究了栀子甙对巯基丙酸稳定的CdTe量子点的荧光淬灭作用,考察了量子点浓度、pH、反应时间等多种因素对量子点-栀子甙体系荧光强度的影响,确定了测定栀子甙的最佳实验条件;并初步探讨了栀子甙与该量子点相互作用的可能反应机理.结果表明,在最佳实验条件下,巯基丙酸稳定的CdTe量子点对栀子甙检测的线性范围为2×10-7~4×10-6 mol/L,检出限为1.4×10-7 mol/L,相对标准偏差为0.355%;且常见的金属阳离子、糖类和氨基酸对栀子甙的测定无显著影响.总体而言,该方法可用于人体体液中栀子甙的检测,且两者的作用过程可初步推断为动态淬灭过程.     

A novel method for iodate determination using cadmium sulfide quantum dots as fluorescence probes

We have developed a novel method for the determination of iodate based on the carboxymethyl cellulose-capped CdS quantum dots (QDs). Factors affecting the iodate detection were investigated, and the optimum conditions were determined. Under the optimum conditions, the relative fluorescence intensity of CdS quantum dots was linearly proportional to IO₃⁻ over a concentration range from 1.0 × 10⁻⁸ to 1.0 × 10⁻⁵ mol L⁻¹ with a correlation coefficient of 0.9987 and a detection limit of 6.0 nmol L⁻¹. Iodide, being oxidized by bromine to form iodate, was detected indirectly. The method was successfully applied to the determination of iodate and total amount of iodine in table salt samples. The related mechanism was also discussed.     

Hydrothermal synthesis of highly luminescent CdTe quantum dots by adjusting precursors’ concentration and their conjunction with BSA as biological fluorescent probes

A study on hydrothermal synthesis of CdTe quantum dots, highly luminescent nanocrystals at a relatively lower temperature, via changing the concentration of the CdTe precursors, is described. The full width at half maximum ranged from 40 to 80 nm and quantum yield (QY) was detected to be 27.4% at room temperature. The as-prepared CdTe QDs were labeled with BSA for fluorescence probes without pretreatment. Conjunction experimental results suggested that the as-prepared CdTe QDs are suitable for the application of biotechnology.     

Synthesis of aqueous CdTe quantum dots embedded silica nanoparticles and their applications as fluorescence probes

This paper presents the synthesis of aqueous CdTe QDs embedded silica nanoparticles by reverse microemulsion method and their applications as fluorescence probes in bioassay and cell imaging. With the aim of embedding more CdTe QDs in silica spheres, we use poly(dimethyldiallyl ammonium chloride) to balance the electrostatic repulsion between CdTe QDs and silica intermediates. By modifying the surface of CdTe/SiO₂ composite nanoparticles with amino and methylphosphonate groups, biologically functionalized and monodisperse CdTe/SiO₂ composite nanoparticles can be obtained. In this work, CdTe/SiO₂ composite nanoparticles are conjugated with biotin-labeled mouse IgG via covalent binding. The biotin-labeled mouse IgG on the CdTe/SiO₂ composite nanoparticles surface can recognize FITC-labeled avidin and avidin on the surface of polystyrene microspheres by protein-protein binding. Finally, the CdTe/SiO₂ composite nanoparticles with secondary antibody are used to label the MG63 osteosarcoma cell with primary antibody successfully, which demonstrates that the application of CdTe/SiO₂ composite nanoparticles as fluorescent probes in bioassay and fluorescence imaging is feasible.     

Interaction of CdTe/CdS quantum dots with antibodies

In the study,we observed the strong adsorption of CdTe/CdS QDs to antibodies and the formation of QDs-antibodies conjugates. Capillary electrophoresis with laser-induced fluorescence detection(CE-LIF),fluorescence spectrometry and fluorescence correlation spectroscopy(FCS) were used to characterize the QDs conjugates with antibody.We found that the QDs-antibody conjugates possessed high fluorescence,small hydrodynamic radii and good stability in aqueous solution.     

Ultrasensitive determination of 1,4-dihydroxybenzene based on fluorescence resonance energy quenching of luminescent quantum dots modified on surface of silica nanoparticles

An ultrasensitive solid-phase fluorescence resonance energy quenching (FREQ) method for determination of 1,4-dihydroxybenzene (DHB) using mercaptosuccinic acid (MSA)-capped CdTe quantum dots (QDs) immobilized on silica nanoparticles (NPs) as donors was developed. In the method, silica NPs were first modified with 3-aminopropyltriethoxysilane (APTS). Then, MSA-capped CdTe QDs were immobilized on the surface of the APTS-modified silica NPs. Finally, DHB in the solution was attached to the empty sites on the surface of silica NPs with QDs through electrostatic interaction. The fluorescence emission of the QDs was quenched by the proximal DHB molecules on the silica NPs. The quenching efficiency of the solid-phase FREQ method was 200-times higher than that of the solution-phase FREQ method. Using the ultrasensitive solid-phase FREQ method, DHB as low as 2.4 × 10⁻¹² mol/L could be detected. The method was applied to quantify trace DHB in water samples.     

CdSe/CdS量子点荧光猝灭法测定芹黄素的研究

以巯基乙酸为稳定剂,在水溶液中合成了具有特殊光学性质的水溶性CdSe/CdS量子点。以该量子点为荧光探针,基于荧光猝灭法对芹黄素进行了定量检测。考察了缓冲体系、反应时间、量子点浓度等多种因素的影响。实验结果表明,在0.001 mol/L、pH为6.80的KH2PO4-Na2HPO4缓冲液中,当量子点浓度为1.2×10^-4mol/L、反应时间为20 min时,该方法的线性范围为0.16-27.02μg/mL,其线性回归方程为F0/F=0.99665＋0.11067ρ（μg/mL）,相关系数r=0.998,检出限为0.13μg/mL,并用于合成样品的分析。     

Determination of arsenic based on quenching of CdS quantum dots fluorescence using the gas-diffusion flow injection method

A sequential injection analysis system for determination of arsenic based on hydride generation and fluorescence quenching of mercaptoacetic acid capped cadmium sulfide quantum dots (CdS-MAA QDs) is described. The generated arsine diffused across the PTFE membrane in a gas-diffusion unit and subsequently interacted with CdS-MAA QDs. The parameters affecting the arsine generation and the fluorescence quenching of QDs were studied. Under the optimum conditions, it was observed that a increase in the concentration of As(III) corresponded well to a decrease in fluorescence intensity according to the Stern-Volmer relationship. The extent of quenching was dependent on the concentration of arsenic in the range of 0.08-3.20 mmol L⁻¹, with the detection limit of 0.07 mg L⁻¹. The precision (%RSD) from eight replicates of the determination of As(III) 1.0 mg L⁻¹ was found to be 1.4%. The proposed method was applied to the determination of arsenic in ground water samples with satisfactory recoveries.