Synthesis, characterization, and testing of supported Au catalysts prepared from atomically-tailored Au38(SC12H25)24 clusters

Nearly monodispersed Au(38)(SC(12)H(25))(24) clusters (1.7 ± 0.2 nm) were synthesized using a modified Brust process while utilizing a "thiol etching" approach for the ligand exchange. HRTEM, MALDI, FTIR, and XAS analysis confirmed the formation of the 38-atom clusters in solution. This solution was used to impregnate a microporous TiO(2) support to give 0.7% Au(38)/TiO(2) catalyst. Subsequent drying in air and treatment with H(2)/He at 400 °C removed most of the sulfur ligands, and also increased the Au cluster size to 3.9 ± 0.96 nm. XPS and EXAFS analysis of this supported catalyst showed trace levels of residual sulfides, apparently located at the Au-TiO(2) interface. CO oxidation tests on these supported clusters show an activation energy and range of TOFs comparable to those reported by others. These results suggest that supported Au clusters of controllable size can be prepared with this thiol-ligated solution-based method, providing a new approach to the synthesis of these catalysts.     

Does core size matter in the kinetics of ligand exchanges of monolayer-protected Au clusters?

This paper compares the kinetics of exchanges of phenylethanethiolate ligands (PhC2S-) of the monolayer-protected clusters (MPCs) Au(38)(SC2Ph)(24) and Au(140)(SC2Ph)(53) with p-substituted arylthiols (p-X-PhSH), where X = NO(2), Br, CH(3), OCH(3), and OH. First-order rate constants at 293 K for exchange of the first ca. 25% of the ligands on the molecule-like Au(38)(SC2Ph)(24) MPC, measured using (1)H NMR, vary linearly with the in-coming arythiol concentration; ligand exchange is an overall second-order reaction. Remarkably, the second-order rate constants for ligand exchange on Au(38)(SC2Ph)(24) are very close to those of corresponding exchange reactions on the larger nanoparticle Au(140)(SC2Ph)(53) MPCs. These are the first results that quantitatively show that the chemical reactivity of different sized nanocrystals is almost independent of size; presumably, this is because the locus of the initial ligand exchanges is a common kind of site, thought to be the nanocrystal vertexes. The rates of later stages of exchange (beyond ca. 25%) differ for Au(38) and Au(140) cores, the latter being much slower presumably due to its larger terrace-like surface atom content. The reverse exchange reaction was studied for Au(38)(p-X-arylthiolate)(24) MPCs (X = NO(2), Br, and CH(3)), where the in-coming ligand is now phenylethanethiol. Remarkably, the rate constants of both forward and reverse exchanges display identical substituent effects, which implies a concurrent bonding of both in-coming and leaving ligands to the Au core in the rate-determining step, as in an associative mechanism. X = NO(2) gives the fastest rates, and the ratio of forward and reverse rate constants gives an equilibrium constant of K(EQ,PE) = 4.0 that is independent of X.     

Facile syntheses of monodisperse ultrasmall Au clusters

During our effort to synthesize the tetrahedral Au20 cluster, we found a facile synthetic route to prepare monodisperse suspensions of ultrasmall Au clusters AuN (N < 12) using diphosphine ligands. In our monophasic and single-pot synthesis, a Au precursor ClAu(I)PPh3 (Ph = phenyl) and a bidentate phosphine ligand P(Ph)2(CH2)(M)P(Ph)2 are dissolved in an organic solvent. Au(I) is reduced slowly by a borane-tert-butylamine complex to form Au clusters coordinated by the diphosphine ligand. The Au clusters are characterized by both high-resolution mass spectrometry and UV-vis absorption spectroscopy. We found that the mean cluster size obtained depends on the chain length M of the ligand. In particular, a single monodispersed Au11 cluster is obtained with the P(Ph)2(CH2)3P(Ph)2 ligand, whereas P(Ph)2(CH2)(M)P(Ph)2 ligands with M = 5 and 6 yield Au10 and Au8 clusters. The simplicity of our synthetic method makes it suitable for large-scale production of nearly monodisperse ultrasmall Au clusters. It is suggested that diphosphines provide a set of flexible ligands to allow size-controlled synthesis of Au nanoparticles.     

Interstaple dithiol cross-linking in Au25(SR)18 nanomolecules: a combined mass spectrometric and computational study

A systematic study of cross-linking chemistry of the Au(25)(SR)(18) nanomolecule by dithiols of varying chain length, HS-(CH(2))(n)-SH where n = 2, 3, 4, 5, and 6, is presented here. Monothiolated Au(25) has six [RSAuSRAuSR] staple motifs on its surface, and MALDI mass spectrometry data of the ligand exchanged clusters show that propane (C3) and butane (C4) dithiols have ideal chain lengths for interstaple cross-linking and that up to six C3 or C4 dithiols can be facilely exchanged onto the cluster surface. Propanedithiol predominately exchanges with two monothiols at a time, making cross-linking bridges, while butanedithiol can exchange with either one or two monothiols at a time. The extent of cross-linking can be controlled by the Au(25)(SR)(18) to dithiol ratio, the reaction time of ligand exchange, or the addition of a hydrophobic tail to the dithiol. MALDI MS suggests that during ethane (C2) dithiol exchange, two ethanedithiols become connected by a disulfide bond; this result is supported by density functional theory (DFT) prediction of the optimal chain length for the intrastaple coupling. Both optical absorption spectroscopy and DFT computations show that the electronic structure of the Au(25) nanomolecule retains its main features after exchange of up to eight monothiol ligands.     

Synthesis and electrochemical and spectroscopic characterization of biicosahedral Au25 clusters

The synthesis and electrochemical and spectroscopic characterization of biicosahedral Au(25) clusters with a composition of [Au(25)(PPh(3))(10)(thiolate)(5)Cl(2)](2+) are described. The biicosahedral Au(25) clusters protected with various types of thiol ligands including alkanethiols, 2-phenylethanethiol, 11-mercaptoundecanoic acid, and 11-mercapto-1-undecanol were synthesized in high yields using a one-step, one-phase procedure in which Au(PPh(3))Cl is reduced with tert-butylamine-borane in the presence of the thiol ligand in a 3:1 v/v chloroform/ethanol solution. All biicosahedral Au(25) clusters prepared exhibit characteristic optical absorption and photoluminescence properties. The emission energy is found to be substantially smaller than the optical absorption energy gap of 1.82 eV, indicating a subgap energy luminescence. The electrochemical HOMO-LUMO gap (~1.54 eV) of the clusters is also substantially smaller than the optical absorption energy gap but rather similar to the emission energy. These electrochemical and optical properties of the biicosahedral Au(25) clusters are distinctly different from those of the Au(25)(thiolate)(18) clusters.     

Electronic and vibrational signatures of the Au102(p-MBA)44 cluster

Optical absorption of a gold nanocluster of 102 Au atoms protected by 44 para-mercaptobenzoic acid (p-MBA) ligands is measured in the range of 0.05-6.2 eV (mid-IR to UV) by a combination of several techniques for purified samples in solid and solution phases. The results are compared to calculations for a model cluster Au(102)(SMe)(44) based on the time-dependent density functional theory in the linear-response regime and using the known structure of Au(102)(p-MBA)(44). The measured and calculated molar absorption coefficients in the NIR-vis region are comparable, within a factor of 2, in the absolute scale. Several characteristic features are observed in the absorption in the range of 1.5-3.5 eV. The onset of the electronic transitions in the mid-IR region is experimentally observed at 0.45 ± 0.05 eV which compares well with the lowest calculated transition at 0.55 eV. Vibrations in the ligand layer give rise to fingerprint IR features below the onset of low-energy metal-to-metal electronic transitions. Partial exchange of the p-MBA ligand to glutathione does not affect the onset of the electronic transitions, which indicates that the metal core of the cluster is not affected by the ligand exchange. The full spectroscopic characterization of the Au(102)(p-MBA)(44) reported here for the first time gives benchmarks for further studies of manipulation and functionalization of this nanocluster to various applications.     

Structural and theoretical basis for ligand exchange on thiolate monolayer protected gold nanoclusters

Ligand exchange reactions are widely used for imparting new functionality on or integrating nanoparticles into devices. Thiolate-for-thiolate ligand exchange in monolayer protected gold nanoclusters has been used for over a decade; however, a firm structural basis of this reaction has been lacking. Herein, we present the first single-crystal X-ray structure of a partially exchanged Au(102)(p-MBA)(40)(p-BBT)(4) (p-MBA = para-mercaptobenzoic acid, p-BBT = para-bromobenzene thiol) with p-BBT as the incoming ligand. The crystal structure shows that 2 of the 22 symmetry-unique p-MBA ligand sites are partially exchanged to p-BBT under the initial fast kinetics in a 5 min timescale exchange reaction. Each of these ligand-binding sites is bonded to a different solvent-exposed Au atom, suggesting an associative mechanism for the initial ligand exchange. Density functional theory calculations modeling both thiol and thiolate incoming ligands postulate a mechanistic pathway for thiol-based ligand exchange. The discrete modification of a small set of ligand binding sites suggests Au(102)(p-MBA)(44) as a powerful platform for surface chemical engineering.     

Absolute configuration retention of a configurationally labile ligand during dynamic processes of thiolate protected gold clusters

Monolayer protected metal clusters are dynamic nanoscale objects. For example, the chiral Au₃₈(2-PET)₂₄ cluster (2-PET: 2-phenylethylthiolate) racemizes at moderate temperature. In addition, ligands and metal atoms can easily exchange between clusters. Such processes are important for applications of monolayer protected metal clusters; however, the mechanistic study of such processes turns out to be challenging. Here we use a configurationally labile, axially chiral ligand, biphenyl-2,2′-dithiol (R/S-BiDi), as a probe to study dynamic cluster processes. It is shown that the ligand exchange of free R/S-BiDi on a chiral Au₃₈(2-PET)₂₄ cluster is diastereospecific. Using chiral chromatography, isolated single diastereomers of the type anticlockwise/clockwise-Au₃₈(2-PET)₂₂(R/S-BiDi)₁ could be isolated. Upon heating, the cluster framework racemizes, while the R/S-BiDi ligand does not. These findings demonstrate that during cluster racemization and/or ligand exchange between clusters, the R/S-BiDi ligand is sufficiently confined, thus preventing its racemization, and exclude the possibility that the ligand desorbs from the cluster surface.

The ligand exchange between a configurationally labile BiDi ligand and intrinsically chiral Au₃₈ gold nanoclusters is diastereoselective. More importantly, the adsorbed ligand retains its configuration during dynamic cluster processes.     

Gold as hydrogen. An experimental and theoretical study of the structures and bonding in disilicon gold clusters Si2Au(n)- and Si2Au(n) (n = 2 and 4) and comparisons to Si2H2 and Si2H4

In a previous communication, we showed that a single Au atom behaves like H in its bonding to Si in a series of Si-Au clusters, SiAu(n) (n = 2-4) (Kiran et al. Angew. Chem., Int. Ed. 2004, 43, 2125). In this article, we show that the H analogy of Au is more general. We find that the chemical bonding and potential energy surfaces of two disilicon Au clusters, Si(2)Au(2) and Si(2)Au(4), are analogous to Si(2)H(2) and Si(2)H(4), respectively. Photoelectron spectroscopy and ab initio calculations are used to investigate the geometrical and electronic structures of Si(2)Au(2)(-), Si(2)Au(4)(-), and their neutral species. The most stable structures for both Si(2)Au(2) and Si(2)Au(2)(-) are found to be C(2)(v), in which each Au bridges the two Si atoms. For Si(2)Au(4)(-), two nearly degenerate dibridged structures in a cis (C(2)(h)) and a trans (C(2)(v)) configuration are found to be the most stable isomers. However, in the neural potential energy surface of Si(2)Au(4), a monobridged isomer is the global minimum. The ground-state structures of Si(2)Au(2)(-) and Si(2)Au(4)(-) are confirmed by comparing the computed vertical detachment energies with the experimental data. The various stable isomers found for Si(2)Au(2) and Si(2)Au(4) are similar to those known for Si(2)H(2) and Si(2)H(4), respectively. Geometrical and electronic structure comparisons with the corresponding silicon hydrides are made to further establish the isolobal analogy between a gold atom and a hydrogen atom.     

Selenolate gold complexes with aurophilic Au(I)-Au(I) and Au(I)-Au(III) interactions

The gold(I) selenolate compound [Au(2)(SePh)(2)(mu-dppf)] (dppf = 1,1'-bis(diphenylphosphino)ferrocene) has been prepared by reaction of [Au(2)Cl(2)(mu-dppf)] with PhSeSiMe(3) in a molar ratio 1:2. This complex reacts with gold(I) or gold(III) derivatives to give polynuclear gold(I)-gold(I) or gold(I)-gold(III) complexes of the type [Au(4)(mu-SePh)(2)(PPh(3))(2)(mu-dppf)](OTf)(2), [Au(3)(C(6)F(5))(3)(mu-SePh)(2)(mu-dppf)], or [Au(4)(C(6)F(5))(6)(mu-SePh)(2)(mu-dppf)], with bridging selenolate ligands. The reaction of [Au(2)(SePh)(2)(mu-dppf)] with 1 equiv of AgOTf leads to the formation of the insoluble Ag(SePh) and the compound [Au(2)(mu-SePh)(mu-dppf)]OTf. The complexes [Au(4)(C(6)F(5))(6)(mu-SePh)(2)(mu-dppf)] and [Au(2)(mu-SePh)(mu-dppf)]OTf (two different solvates) have been characterized by X-ray diffraction studies and show the presence of weak gold(I)-gold(III) interactions in the former and intra- and intermolecular gold(I)-gold(I) inter-actions in the later.     

Diphosphines and pyrazole/pyrazolate-type ligands as building blocks in luminescent Au(I) complexes

A series of gold(I) complexes containing diphenylphosphine bridging ligands, dppm, dppe, dpephos, dbfphos and biphep and co-ligands of the type pyrazole have been synthesized. The X-ray crystal structures of [Au₂(μ-dpephos)(μ-pz^2CH3)][PF₆], [Au₂(μ-dbfphos)(μ-pz^2CH3)][PF₆], and of the starting compound [Au₂Cl₂(μ-biphep)] indicate that the structural and stoichiometric characteristics of the new complexes depend on the diphosphine ligand. The three complexes show Au?Au contacts between 3.27 Å and 3.30 Å, with that of the biphep compound being the shortest. Digold (I)-diphosphine derivatives with a bridging pyrazolate ligand are obtained in all cases, except when [Au₂Cl₂(μ-biphep)] is used as starting material. Surprisingly, in this case, two monodentate neutral pyrazole ligands are attached to the gold atoms. The new complexes are luminescent in the solid state at 77 K and in solution both at room temperature and 77 K. Low energy emission bands related to the presence of Au?Au interactions have been identified in some of the compounds in the solid state and/or in solution.     

Aurophilicity in gold(I) thiosemicarbazone clusters

The reaction of the phosphine thiosemicarbazone ligands HLPH and HLPMe with Au(I) ions yields the gold complexes [Au(3)(HLPH)(2)Cl(2)]Cl·2MeOH (1·2MeOH) and [Au(2)(HLPMe)Cl(2)] (2). The structures determined by X Ray diffraction, [Au(3)(HLPH)(2)Cl(2)]Cl·4MeOH (1·4MeOH) and [Au(2)(HLPMe)Cl(2)](2) (2), are the first examples of gold(I) thiosemicarbazone clusters showing aurophilicity. The structure of the trinuclear cation 1 contains the Au(1) atom located in an inversion centre, being connected to another gold(I) atom, Au(2), through a phosphino thiosemicarbazone molecule which acts as a S,P-bridging ligand. Additionally, every gold(I) atom in the trinuclear cation 1 assembles into trinuclear linear cluster units by means of close gold-gold interactions, being connected through the crystal cell in a 2D zigzag mode. The crystal structure of [Au(2)(HLPMe)Cl(2)](2) (2) contains one discrete molecule [(AuCl)(2)(HLPMe)] in the asymmetric unit, which is further assembled into tetranuclear [(AuCl)(2)(HLPMe)](2) units by means of close gold-gold interactions. Both clusters are highly luminescent in solution.     

Palladium doping of magic gold cluster Au38(SC2H4Ph)24: formation of Pd2Au36(SC2H4Ph)24 with higher stability than Au38(SC2H4Ph)24

A phenylethanethiolate-protected Pd(2)Au(36)(SC(2)H(4)Ph)(24) cluster, which is a two-Pd atom-doped cluster of the well studied magic gold cluster Au(38)(SC(2)H(4)Ph)(24), was synthesized in high purity and its stability was investigated. The results demonstrate that Pd(2)Au(36)(SC(2)H(4)Ph)(24) is more stable than Au(38)(SC(2)H(4)Ph)(24) against degradation in solution and core etching by thiols.     

Electrospray ionization mass spectrometry of uniform and mixed monolayer nanoparticles: Au25[S(CH2)2Ph]18 and Au25[S(CH2)2Ph]18-x(SR)x

New approaches to electrospray ionization mass spectrometry (ESI-MS)-with exact compositional assignments-of small (Au25) nanoparticles with uniform and mixed protecting organothiolate monolayers are described. The results expand the scope of analysis and reveal a rich chemistry of ionization behavior. ESI-MS of solutions of phenylethanethiolate monolayer-protected gold clusters (MPCs), Au25(SC2Ph)18, containing alkali metal acetate salts (MOAc) produce spectra in which, for Na+, K+, Rb+, and Cs+ acetates, the dominant species are MAu25(SC2Ph)182+ and M2Au25(SC2Ph)182+. Li+ acetates caused ligand loss. This method was extended to the analysis of Au25 MPCs with mixed monolayers, where thiophenolate (-SPh), hexanethiolate (-SC6), or biotinylated (-S-PEG-biotin) ligands had been introduced by ligand exchange. In negative-mode ESI-MS, no added reagents were needed in order to observe Au25(SC2Ph)18- and to analyze mixed monolayer Au25 MPCs prepared by ligand exchange with 4-mercaptobenzoic acid, HSPhCOOH, which gave spectra through deprotonation of the carboxylic acids. Adducts of tetraoctylammonium (Oct4N+) with -SPhCOO- sites were also observed. Mass spectrometry is the only method that has demonstrated capacity for measuring the exact distribution of ligand-exchange products. The possible origins of the different Au25 core charges (1-, 0, 1+, 2+) observed during electrospray ionization are discussed.     

Reaction of triphenylphosphine with phenylethanethiolate-protected Au38 nanoparticles

The replacement of phenylethanethiolate (SC2Ph) ligands on 1.1 nm (core diameter) Au38(SC2Ph)24 monolayer-protected clusters (MPCs) with varied amounts of triphenylphosphine (PPh3) is investigated in methylene chloride. UV-vis spectra suggest that changes in the MPC Au core size occur when large amounts (> 10 equiv moles per cluster) of PPh3 are reacted with Au38(SC2Ph)24. 1H and 31P NMR spectra following the addition of smaller amounts (< 5 equiv moles) of PPh3 indicate that the reaction liberates a AuISC2Ph complex, as opposed to a SC2Ph thiol, disulfide, or anion. A 1H NMR kinetic study shows that the exchange is surprisingly rapid, even faster than exchanges of thiolates with other thiolates, at room temperature and in air. The reaction is slowed when cooled or conducted under Ar. The difference in potentials of the initial one-electron voltammetric reduction and oxidation of Au38(SC2Ph)24 decreases slightly upon reaction with small amounts of PPh3.     

Synthesis, Reactivity, and Structural Characterization of the Nonclassical [MTe(7)](n)()(-) Anions (M = Ag, Au, n = 3; M = Hg, n = 2)

Several tellurometalates of the general formula [MTe(7)](n)()(-) (n = 2, 3) have been isolated as salts of organic cations by reaction of suitable metal sources with polytelluride solutions in DMF. The [HgTe(7)](2)(-) anion has the same structure in both the NEt(4)(+) and the PPh(4)(+) salts except for a minor change in the ligand conformation. The [AgTe(7)](3)(-) and [HgTe(7)](2)(-) anions contain metal atoms coordinated in trigonal-planar fashion to eta(3)-Te(7)(4)(-) ligands. The central Te atom of an eta(3)-Te(7)(4)(-) ligand is coordinated to the metal atom and to two Te atoms in a "T"-shaped geometry consistent with a hypervalent 10 e(-) center. The planar [AuTe(7)](3)(-) anion may best be described as possessing a square-planar Au(III) atom coordinated to an eta(3)-Te(5)(4)(-) ligand and to an eta(1)-Te(2)(2)(-) ligand. The reaction of [NEt(4)](n)()[MTe(7)] (M = Hg, n = 2; M = Au, n = 3) with the activated acetylene dimethyl acetylenedicarboxylate (DMAD) has yielded the products [NEt(4)](n)()[M(Te(2)C(2)(COOCH(3))(2))(2)] (M = Hg, n = 2; M = Au, n = 1). The metal atoms are coordinated to two Te(COOCH(3))C=C(COOCH(3))Te(2)(-) ligands, for M = Hg in a distorted tetrahedral fashion and for M = Au in a square-planar fashion.     

Reaction of Au(55)(PPh(3))(12)Cl(6) with thiols yields thiolate monolayer protected Au(75) clusters

This paper describes the reaction of the phosphine-protected Au nanoparticle Au(55)(PPh(3))(12)Cl(6) (1, "Au55") with hexanethiol (2) and other thiols. The voltammetry of the reaction product 2 displays a well-defined pattern of peaks qualitatively reminiscent of Au(38) nanoparticles, but with quite different spacing (0.74 +/- 0.01 V) between the potentials of initial oxidation and reduction steps (electrochemical gap). Correction of this "molecule-like" gap for charging energy indicates a HOMO-LUMO gap energy of about 0.47 V. Voltammetry of the products (3 and 4) of reaction of 1 with C(3)H(7)SH and PhC(2)H(4)SH, respectively, is similar. Laser desorption/ionization mass spectrometry (LDI-MS) shows that 2 contains a high proportion of a core mass in the 14-15 kDa range, which is proposed to be Au(75). UV-vis spectra of 2-4 are relatively featureless, similar to previous reports of thiolate-protected Au(75) nanoparticles. HPLC analysis of 2 shows a Au(75) content of ca. 73%; the electrochemical purity estimate is also high, about 55%. Combining the mass spectrometric result with thermogravimetric analysis of 2 leads to a preliminary formulation Au(75)(SC(6)H(13))(40). This Au(75) synthesis complements a previous Brust-type synthesis and is unusual in the apparent provocation in the reaction of an increase in core size.     

Large-scale synthesis of thiolated Au25 clusters via ligand exchange reactions of phosphine-stabilized Au11 clusters

Phosphine-stabilized Au11 clusters in chloroform were reacted with glutathione (GSH) in water under a nitrogen atmosphere. The resulting Au:SG clusters exhibit an optical absorption spectrum similar to that of Au25(SG)18, which was isolated as one of the major products from chemically prepared Au:SG clusters (Negishi, Y. et al. J. Am. Chem. Soc. 2005, 127, 5261). Rigorous characterization by optical spectroscopy, electrospray ionization mass spectrometry, and polyacrylamide gel electrophoresis confirms that the Au25(SG)18 clusters were selectively obtained on the sub-100 mg scale by ligand exchange reaction under aerobic conditions. The ligand exchange strategy offers a practical and convenient method of synthesizing thiolated Au25 clusters on a large scale.     

Structural, electronic, optical, and chiroptical properties of small thiolated gold clusters: the case of Au6 and Au8 cores protected with dimer [Au2(SR)3] and trimer [Au3(SR)4)] motifs

We report results of a theoretical study, based on density functional theory (DFT), on the structural, electronic, optical, and chiroptical properties of small thiolated gold clusters, [Au(n)(SR)(m) (n = 12-15, 16-20; m = 9-12, 12-16)]. Some of these clusters correspond to those recently synthesized with the surfactant-free method. To study the cluster physical properties, we consider two cluster families with Au(6) and Au(8) cores, respectively, covered with dimer [Au(2)(SR)(3)] and trimer [Au(3)(SR)(4)] (CH(3) being the R group) motifs or their combinations. Our DFT calculations show, by comparing the relaxed structures of the [Au(6)[Au(2)(SR)(3)](3)](+), [Au(6)[Au(2)(SR)(3)](2)[Au(3)(SR)(4)]](+), [Au(6)[Au(2)(SR)(3)][Au(3)(SR)(4)](2)](+), and [Au(6)[Au(3)(SR)(4)](3)](+) cationic clusters, that there is an increasing distortion in the Au(6) core as each dimer is replaced by a longer trimer motif. For the clusters in the second family, Au(8)[Au(3)(SR)(4)](4), Au(8)[Au(2)(SR)(3)][Au(3)(SR)(4)](3), Au(8)[Au(2)(SR)(3)](2)[Au(3)(SR)(4)](2), Au(8)[Au(2)(SR)(3)](3)[Au(3)(SR)(4)], and Au(8)[Au(2)(SR)(3)](4), a smaller distortion of the Au(8) core is observed as dimer motifs are substituted by trimer ones. An interesting trend emerging from the present calculations shows that as the number of trimer motifs increases in the protecting layer of both Au(6) and Au(8) cores, the average of the interatomic Au(core)-S distances reduces. This shrinkage in the Au(core)-S distances is correlated with an increase of the cluster HOMO-LUMO (H-L) gap. From these results, it is predicted that a larger number of trimer motifs in the cluster protecting layer would induce larger H-L gaps. By analyzing the electronic transitions that characterize the optical absorption and circular dichroism spectra of the clusters under study, it is observed that the molecular orbitals involved are composed of comparable proportions of orbitals corresponding to atoms forming the cluster core and the protecting dimer and trimer motifs.     

NIR luminescence intensities increase linearly with proportion of polar thiolate ligands in protecting monolayers of Au38 and Au140 quantum dots

The near-infrared photoluminescence of monolayer-protected Au38 and Au140 clusters (MPCs) is intensified with exchange of nonpolar ligands by more polar thiolate ligands. The effect is general and includes as more polar in-coming ligands: thiophenolates with a variety of p-substituents; alkanethiolates omega-terminated by alcohol, acid, or quaternary ammonium groups; and thio-amino acids. Remarkably, place exchanges of the initial phenylethanethiolates on Au38 MPCs by p-substituted thiophenolates and thio-amino acids and of hexanethiolates on Au140 MPCs by omega-quaternary ammonium terminated undecylthiolates result in increases in the near-infrared (NIR) luminescence intensities that are linear with the number of new polar ligands. The increased intensities are systematically larger for thiophenolate ligands having more electron-withdrawing substituents. Analogous effects on intensities are observed in the NIR emission of Au140 MPCs upon place exchange of alkanethiolates with thiolates having short connecting alkanethiolate chains to quaternary ammonium and to omega-carboxylic acid termini, and with oxidative charging of the Au cores. The observations are consistent with sensitivity of the luminescence mechanism to any factor that enhances the electronic polarization of the bonds between the Au core atoms and their thiolate ligands. The luminescence is discussed in terms of a surface electronic excitation, as opposed to a core volume excitation.