A Ca2+‐, Mg2+‐, and Zn2+‐Based Dendritic Contractile Nanodevice with Two pH‐Dependent Motional Functions

A contractile dendritic motional device is reported where metal ions with biological importance—Ca²⁺ (the main regulatory and signaling species of the natural muscles), Mg²⁺, and Zn²⁺—initiate two kinds of motional functions. The first motional function is the metal‐ion‐induced contraction of a linear strand into a Z‐shaped dinuclear complex, and the second one is the change of the height of Z‐shaped complexes via transmetalation. By means of the pH‐dependent counterligand tren, the two motional features of the machine can depend on alternate additions of acid and base. An optical response is associated with the conversion of the linear form (which is yellow) into the metalated Z‐shaped one (which is red).     

Synthesis and Reactivity of 2‐Pyrrolidino‐, 2‐N‐Methylpiperazino‐, 2‐Piperidino‐, and 2‐Morpholino‐1,3,4‐thiadiazines

A variety of 2‐pyrrolidino‐, 2‐N‐methylpiperazino‐, 2‐piperidino‐, and 2‐morpholino‐1,3,4‐thiadiazines were prepared by cyclocondensation of phenacyl halides with thiosemicarbazides. Heating of the products resulted in desulfurization and formation of pyrazoles. The rate of this process strongly depends on the substitution pattern of the 1,3,4‐thiadiazines.     

Synthesis of 9‐[2‐(2‐hydroxymethyl‐2‐methyl‐, ‐(2‐acetoxymethyl‐2‐methyl‐, ‐(2,2‐di(hydroxymethyl)‐, and ‐(2,2‐Di(acetoxymethyl)‐1,3‐dioxan‐5‐yl)ethyl] derivatives of guanine and 2‐aminopurine

Synthesis of 9‐[2‐(2‐hydroxymethyl‐2‐methyl‐, ‐(2‐acetoxymethyl‐2‐methyl‐, ‐(2,2‐di(hydroxymethyl)‐, and ‐(2,2‐di(acetoxymethyl)‐1,3‐dioxan‐5‐yl)ethyl] derivatives of guanine and 2‐aminopurine, 2–9 , has been accomplished in seven to eight step sequences from readily available 1‐(tert‐butyldiphenylsilyloxy)‐acetone, 1,3‐di(tert‐butyldiphenylsilyloxy)acetone, and the diol 10 . Formation of cyclic ketals 11 and 12 was carried out successfully under an acidic condition using a catalytic amount of methanesulfonic acid along with excess anhydrous copper(II) sulfate in toluene. Subsequent reactions of desilylation, acetylation, hydrogenolysis, and bromination afforded the key intermediates 19 and 20 , which were coupled with 2‐amino‐6‐chloropurine to produce the purine compounds 21 and 22 in good yields. Guanine derivatives 2–5 were obtained from 21 and 22 by hydrolysis and acetylation, while the dechlorination and hydrolysis of 21 and 22 yielded the 2‐aminopurine compounds 6–9 .     

Ring‐Opening Regio‐, Diastereo‐, and Enantioselective 1,3‐Chlorochalcogenation of Cyclopropyl Carbaldehydes

meso‐Cyclopropyl carbaldehydes are treated in the presence of an organocatalyst with sulfenyl and selenyl chlorides to afford 1,3‐chlorochalcogenated products. The transformation is achieved by a merged iminium–enamine activation. The enantioselective desymmetrization reaction, leading to three adjacent stereocenters, furnished the target products in complete regioselectivity and moderate to high diastereo‐ and enantioselectivities (d.r. up to 15:1 and e.r. up to 93:7).     

Preparation of 2‐, 4‐, 5‐, and 6‐aminonicotinic acid tert‐butyl esters

Procedures are reported to prepare the tert‐butyl esters of 2‐aminonicotinic acid, 4‐aminonicotinic acid, 5‐aminonicotinic acid, and 6‐aminonicotinic acid from 2‐chloronicotinic acid, 4‐chloronicotinic acid, 5‐bromonicotinic acid, and 6‐chloronicotinic acid, respectively, without need for purification of intermediates. J. Heterocyclic Chem., (2012).     

Gold‐Catalyzed [2+2+1] Cycloaddition of 1,6‐Diyne Carbonates and Esters with Aldehydes to 4‐(Cyclohexa‐1,3‐dienyl)‐1,3‐dioxolanes

A synthetic method to stereoselectively prepare 4‐(cyclohexa‐1,3‐dienyl)‐1,3‐dioxolanes in good to excellent yields by gold(I)‐catalyzed [2+2+1] cycloaddition of 1,6‐diyne carbonates and esters with aldehydes is described. The cascade process involves 1,2‐acyloxy migration followed by cyclopropenation and cycloreversion. This leads to an unprecedented [2+2+1] cycloaddition of the resulting alkenylgold carbenoid species, examples of which are extremely rare, with two aldehyde molecules at catalyst loadings as low as 1 mol %. The usefulness of this cycloisomerization chemistry was further demonstrated by the transformation of one example to the corresponding phenol.     

Thermochemistry of N‐heterocyclic carbenes with 5‐, 4‐, 3‐, and 2‐membered rings

N‐heterocyclic carbenes (NHCs) based on imidazole‐2‐ylidene ( 1 ) or the saturated imidazolidine‐2‐ylidene ( 2 ) scaffolds are long‐lived singlet carbenes. Both benefit from inductive stabilization of the sigma lone pair on carbon by neighboring N atoms and delocalization of the N pi lone pairs into the nominally vacant p‐pi atomic orbital at the carbene carbon. With thermochemical schemes G4 and CBS‐QB3, we estimate the relative thermodynamic stabilization of smaller ring carbenes and acyclic species which may share the keys to NHC stability. These include four‐membered ring systems incorporating the carbene center, two trivalent N centers, and either a boron or a phosphorus atom to complete the ring. Amino‐substituted cyclopropenylidenes have been reported but three‐membered rings containing the carbene center and two N atoms are not known. Our calculations suggest that amino‐substituted cyclopropenylidenes are comparable in stability to the four‐membered NHCs but that diazacyclopropanylidenes would be substantially less effectively stabilized. Concluding the series are acyclic carbenes with and without neighboring N atoms and a series of “two‐membered ring” azapropadienenylidene cations of form :C?N?W with W = an electron‐withdrawing agent. We have studied W = NO₂, CH₂(+), CF₂(+), and (CN)₂C(+). Although these systems display a degree of stabilization and carbene‐like electronic structure, the stability of the NHCs is unsurpassed. © 2014 Wiley Periodicals, Inc.     

13‐cis‐β,β‐Carotene and 15‐cis‐β,β‐carotene

13‐cis‐β,β‐Carotene, C₄₀H₅₆, crystallizes with a complete molecule in the asymmetric unit, whereas 15‐cis‐β,β‐carotene, also C₄₀H₅₆, has twofold symmetry about an axis through the central bond of the polyene chain. The polyene methyl groups are arranged on one side of the polyene chains for each molecule and the 6‐s‐cisβ end groups, with the cyclohexene rings in half‐chair conformations, are twisted out of the planes of the polyene chains by angles ranging from 41.37 (17) to 52.2 (4)°. The molecules in each structure pack so that the arms of one occupy the cleft of the next, and there is significant π–π stacking of the almost‐parallel polyene chains of the 15‐cis isomer, which approach at distances of 3.319 (1)–3.591 (1) Å.     

Syntheses of 2‐alkylthio‐1,3‐thiazine derivatives from S‐alkyldithiocarbamates and α,β‐unsaturated ketones

Various 2‐alkylthio‐1,3‐thiazine derivatives were synthesized by the reactions of S‐alkylthiocarbamates with α,β‐unsaturated ketones in the presence of BF₃ · Et₂O. The thiazine was converted into two isomeric dehydrated products in the presence of a Lewis acid. © 2002 Wiley Periodicals, Inc. Heteroatom Chem 13:377–379, 2002; Published online in Wiley Interscience (www.interscience.wiley.com). DOI 10.1002/hc.10055     

(±)‐6‐tert‐Butyl‐8‐hydroxymethyl‐2‐­phenyl‐4H‐1,3‐benzodioxin and 2,2,2′,2′,6,6′‐hexamethyl‐8,8′‐methylenebis(4H‐1,3‐benzodioxin)

Two compounds containing 1,3‐benzodioxin groups are reported, namely (±)‐6‐tert‐butyl‐8‐hydroxy­methyl‐2‐phenyl‐4H‐1,3‐benzodioxin, C₁₉H₂₂O₃, (I), and 2,2,2′,2′,6,6′‐hexamethyl‐8,8′‐methyl­enebis(4H‐1,3‐benzodioxin), C₂₃H₂₈O₄, (II).The hydroxy groups of neighbouring mol­ecules in (I) are hydrogen bonded to each other, giving rise to double‐row chains. The mol­ecule in (II) adopts a `butterfly' conformation, with the O atoms in distal positions. In both compounds, the dioxin rings are in distorted half‐chair conformations.     

5-雄烯-3β, 7α, 17β-三醇和5-雄烯-3β, 7β, 17β-三醇的合成

以5-雄烯二醇为原料,用微生物转化的方法合成了两个重要的神经甾体5-雄烯-3β, 7α, 17β-三醇和5-雄烯-3β, 7β, 17β-三醇。所用菌种总枝毛霉为我们自己筛选,并首次应用于5-雄烯-3β, 7α, 17β-三醇和5-雄烯-3β, 7β, 17β-三醇的合成中。     

Dispiro[adamantane‐2,2′‐1′,3′,6′,9′,11′,14′‐hexathiacyclohexadecane‐10′,2′′‐adamantane]

The conformational features of the title compound, C₂₈H₄₄S₆, are compared with previously reported analogous macrocycles. The type of substituent affects considerably the conformation of the macrocycle. A ¹H NMR titration of the title compound with AgBF₄ indicated the formation of the 1:1 complex, which was not crystallized.     

Synthesis of Dispiro[indole‐3,2′‐pyrrolidine‐3′,2″‐pyrrolizine]‐1″,2(1H)‐diones via Azomethine Ylide 1,3‐Dipolar Cycloaddition

The 1,3‐dipolar cycloaddition of azomethine ylide generated in situ from isatin and sarcosine to 2‐arylmethylidene‐2,3‐dihydro‐1H‐pyrrolizin‐1‐ones afforded novel 1′‐methyl‐4′‐(aryl)‐1″H‐dispiro[indole‐3,2′‐pyrrolidine‐3′,2″‐pyrrolizine]‐1″,2(1H)‐diones in good yields. The structures of all the products were characterized thoroughly by NMR, infrared spectroscopy, mass spectrum, and elemental analysis.     

Novel polyamidoamine‐based hydrogel with an innovative molecular architecture as a Co2+‐, Ni2+‐, and Cu2+‐sorbing material: Cyclovoltammetry and extended X‐ray absorption fine structure studies

An amphoteric polyamidoamine (PAA)‐based hydrogel, named INT‐PAA1, with a novel molecular architecture was prepared and studied as a Co²⁺‐, Ni²⁺‐, and Cu²⁺‐sorbing material. This hydrogel was obtained by the synthesis of a PAA in the presence of a second presynthesized PAA carrying many primary amino groups as side substituents, which acted as a macromolecular crosslinking agent. Therefore, it had an intersegmented structure. INT‐PAA1 exhibited a remarkable sorption capacity and sorption rate for Co²⁺, Ni²⁺, and Cu²⁺ that were advantageously in situ monitored by cyclic voltammetry. An extended X‐ray absorption fine structure spectroscopy characterization of the Co²⁺/INT‐PAA1 complex was also performed. The very fast and quantitative metal‐ion uptake, made apparent by an intense coloring of the hydrogel, showed remarkable potential for environmental applications such as heavy‐metal detection, recovery, and elimination. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 2316–2327, 2006