ROS‐Responsive N‐Alkylaminoferrocenes for Cancer‐Cell‐Specific Targeting of Mitochondria

Mitochondrial membrane potential is more negative in cancer cells than in normal cells, allowing cancer targeting by delocalized lipophilic cations (DLCs). However, as the difference is rather small, these drugs affect also normal cells. Now a concept of pro‐DLCs is proposed based on an N‐alkylaminoferrocene structure. These prodrugs are activated by the reaction with reactive oxygen species (ROS) forming ferrocenium‐based DLCs. Since ROS are overproduced in cancer, the high‐efficiency cancer‐cell‐specific targeting of mitochondria could be achieved as demonstrated by fluorescence microscopy in combination with two fluorogenic pro‐DLCs in vitro and in vivo. We prepared a conjugate of another pro‐DLC with a clinically approved drug carboplatin and confirmed that its accumulation in mitochondria was higher than that of the free drug. This was reflected in the substantially higher anticancer effect of the conjugate.     

A General One‐Pot Strategy for the Synthesis of High‐Performance Transparent‐Conducting‐Oxide Nanocrystal Inks for All‐Solution‐Processed Devices

For all‐solution‐processed (ASP) devices, transparent conducting oxide (TCO) nanocrystal (NC) inks are anticipated as the next‐generation electrodes to replace both those synthesized by sputtering techniques and those consisting of rare metals, but a universal and one‐pot method to prepare these inks is still lacking. A universal one‐pot strategy is now described; through simply heating a mixture of metal–organic precursors a wide range of TCO NC inks, which can be assembled into high‐performance electrodes for use in ASP optoelectronics, were synthesized. This method can be used for various oxide NC inks with yields as high as 10 g. The formed NCs are of high crystallinity, uniform morphology, monodispersity, and high ink stability and feature effective doping. Therefore, the inks can be readily assembled into films with a surface roughness of 1.6 nm. Typically, a sheet resistance of 110 Ω sq^?1 can be achieved with a transmittance of 88 %, which is the best performance for TCO NC ink‐based electrodes described to date. These electrodes can thus drive a polymer light‐emitting diode (PLED) with a luminance of 2200 cd m^?2 at 100 mA cm^?2.     

A One‐pot,Four‐component Protocol for the Synthesis of 2‐Aroylimino‐3‐aryl‐4‐methyl‐5‐acetyl‐1,3‐thiazolines

A concise and efficient route for the synthesis of new 2‐aroylimino‐3‐aryl‐4‐methyl‐5‐acetyl‐1,3‐thiazolines in good to excellent yields is described. This involves the one‐pot, four‐component reaction of suitable aroyl chlorides, potassium thiocyanate, anilines, and 3‐chloropentane‐2,4‐dione in the presence of N‐methylimidazole.     

Phosphate‐Tether‐Mediated Ring‐Closing Metathesis for the Preparation of Complex 1,3‐anti‐Diol‐Containing Subunits

An array of examples of diastereoselective, phosphate‐tether‐mediated ring‐closing metathesis reactions, which highlight the importance of product ring size and substrate stereochemical compatibility, as well as complexity, is reported. Studies focus primarily on the formation of bicyclo[n.3.1]phosphates, involving the coupling of C₂‐symmetric dienediol subunits with a variety of simple, as well as complex, alcohol partners.     

X‐ray Radiation‐Controlled NO‐Release for On‐Demand Depth‐Independent Hypoxic Radiosensitization

Multifunctional stimuli‐responsive nanotheranostic systems are highly desirable for realizing simultaneous biomedical imaging and on‐demand therapy with minimized adverse effects. Herein, we present the construction of an intelligent X‐ray‐controlled NO‐releasing upconversion nanotheranostic system (termed as PEG‐USMSs‐SNO) by engineering UCNPs with S‐nitrosothiol (R‐SNO)‐grafted mesoporous silica. The PEG‐USMSs‐SNO is designed to respond sensitively to X‐ray radiation for breaking down the S N bond of SNO to release NO, which leads to X‐ray dose‐controlled NO release for on‐demand hypoxic radiosensitization besides upconversion luminescent imaging through UCNPs in vitro and in vivo. Thanks to the high live‐body permeability of X‐ray, our developed PEG‐USMSs‐SNO may provide a new technique for achieving depth‐independent controlled NO release and positioned radiotherapy enhancement against deep‐seated solid tumors.     

Chain composition dependence of luminescence properties for copolymers of 2‐methoxy‐5‐2′‐ethyl‐hexyloxy‐1,4‐phenylenevinylene and 2,3‐diphenyl‐5‐octyl‐1,4‐phenylenevinylene

The copolymers of 2‐methoxy‐5‐2′‐ethyl‐hexyloxy‐1,4‐phenylenevinylene (MEH‐PV) and 2,3‐diphenyl‐5‐octyl‐1,4‐phenylenevinylene were prepared via the Gilch route with their chain compositions and the reactivity ratios of the monomers estimated by ¹H NMR spectroscopy. The results indicated that the copolymers tended to form an alternative copolymer as the feed ratio of the monomers closed to one‐half. When an individual copolymer solution in tetrahydrofuran was spun‐cast to form a film, the MEH‐PV units were able to attract the like units from the adjacent chains. As a result, the ultraviolet–visible absorption spectrum of the alternative copolymer in film form was broader than the spectra of those with different compositions. The photoluminescence spectra of the copolymers in film form exhibited the characteristic shoulder of poly(2‐methoxy‐5‐2′‐ethyl‐hexyloxy‐1,4‐phenylenevinylene), even though the content of MEH‐PV units was not great enough for the formation of repeat units in sequence. © 2003 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 41: 2180–2186, 2003     

Anthracene‐Containing Wide‐Band‐Gap Conjugated Polymers for High‐Open‐Circuit‐Voltage Polymer Solar Cells

The synthesis, characterization, and photophysical and photovoltaic properties of two anthracene‐containing wide‐band‐gap donor and acceptor (D–A) alternating conjugated polymers ( P1 and P2 ) are described. These two polymers absorb in the range of 300–600 nm with a band gap of about 2.12 eV. Polymer solar cells with P1 :PC₇₁BM as the active layer demonstrate a power conversion efficiency (PCE) of 2.23% with a high V_oc of 0.96 V, a J_sc of 4.4 mA cm⁻², and a comparable fill factor (FF) of 0.53 under simulated solar illumination of AM 1.5 G (100 mW cm⁻²). In addition, P2 :PC₇₁BM blend‐based solar cells exhibit a PCE of 1.42% with a comparable V_oc of 0.89 V, a J_sc of 3.0 mA cm⁻², and an FF of 0.53.

     

A Native‐Chemical‐Ligation‐Mechanism‐Based Ratiometric Fluorescent Probe for Aminothiols

Thiol‐containing amino acids (aminothiols) such as cysteine (Cys) and homocysteine (Hcy) play a key role in various biological processes including maintaining the homeostasis of biological thiols. However, abnormal levels of aminothiols are associated with a variety of diseases. The native chemical ligation (NCL) reaction has attracted great attention in the fields of chemistry and biology. NCL of peptide segments involves cascade reactions between a peptide‐α‐thioester and an N‐terminal cysteine peptide. In this work, we employed the NCL reaction mechanism to formulate a Förster resonance energy transfer (FRET) strategy for the design of ratiometric fluorescent probes that were selective toward aminothiols. On the basis of this new strategy, the ratiometric fluorescent probe 1 for aminothiols was judiciously designed. The new probe is highly selective toward aminothiols over other thiols and exhibits a very large variation (up to 160‐fold) in its fluorescence ratio (I₄₅₈/I₆₀₃). The new fluorescent probe is capable of ratiometric detection of aminothiols in newborn calf and human serum samples and is also suitable for ratiometric fluorescent imaging of aminothiols in living cells.     

PaDEL‐DDPredictor: Open‐source software for PD‐PK‐T prediction

ADMET (absorption, distribution, metabolism, excretion, and toxicity)‐related failure of drug candidates is a major issue for the pharmaceutical industry today. Prediction of PD‐PK‐T properties using in silico tools has become very important in pharmaceutical research to reduce cost and enhance efficiency. PaDEL‐DDPredictor is an in silico tool for rapid prediction of PD‐PK‐T properties of compounds from their chemical structures. It is free and open‐source software that, has both graphical user interface and command line interface, can work on all major platforms (Windows, Linux, and MacOS) and supports more than 90 different molecular file formats. The software can be downloaded from http://padel.nus.edu.sg/software/padelddpredictor . © 2012 Wiley Periodicals, Inc.     

Activity‐Based Probes for 15‐Lipoxygenase‐1

Human 15‐lipoxygenase‐1 (15‐LOX‐1) plays an important role in several inflammatory lung diseases, such as asthma, COPD, and chronic bronchitis, as well as various CNS diseases, such as Alzheimer's disease, Parkinson's disease, and stroke. Activity‐based probes of 15‐LOX‐1 are required to explore the role of this enzyme further and to enable drug discovery. In this study, we developed a 15‐LOX‐1 activity‐based probe for the efficient activity‐based labeling of recombinant 15‐LOX‐1. 15‐LOX‐1‐dependent labeling in cell lysates and tissue samples was also possible. To mimic the natural substrate of the enzyme, we designed activity‐based probes that covalently bind to the active enzyme and include a terminal alkene as a chemical reporter for the bioorthogonal linkage of a detectable functionality through an oxidative Heck reaction. The activity‐based labeling of 15‐LOX‐1 should enable the investigation and identification of this enzyme in complex biological samples, thus opening up completely new opportunities for drug discovery.     

Highly Air‐Stable Electron‐Transport Material for Ink‐Jet‐Printed OLEDs

A novel cross‐linkable electron‐transport material has been designed and synthesized for use in the fabrication of solution‐processed OLEDs. The material exhibits a low LUMO level of ?3.51 eV, a high electron mobility of 1.5×10^?5 cm² V^?1 s^?1, and excellent stability. An average 9.3 % shrinkage in film thickness was observed for the film after thermal curing. A maximum external quantum efficiency (EQE) of 15.6 % (35.0 cd A^?1) was achieved for blue‐phosphorescent OLEDs by spin‐coating and 13.8 % (31.0 cd A^?1) for an ink‐jet‐printed device, both of which are better than the EQE of a control device prepared by vacuum‐deposition (see figure).     

Side‐Chain Engineering of Benzodithiophene‐Fluorinated Quinoxaline Low‐Band‐Gap Co‐polymers for High‐Performance Polymer Solar Cells

A new series of donor–acceptor co‐polymers based on benzodithiophene and quinoxaline with various side chains have been developed for polymer solar cells. The effect of the degree of branching and dimensionality of the side chains were systematically investigated on the thermal stability, optical absorption, energy levels, molecular packing, and photovoltaic performance of the resulting co‐polymers. The results indicated that the linear and 2D conjugated side chains improved the thermal stabilities and optical absorptions. The introduction of alkylthienyl side chains could efficiently lower the energy levels compared with the alkoxyl‐substituted analogues, and the branched alkoxyl side chains could deepen the HOMO levels relative to the linear alkoxyl chains. The branched alkoxyl groups induced better lamellar‐like ordering, but poorer face‐to‐face packing behavior. The 2D conjugated side chains had a negative influence on the crystalline properties of the co‐polymers. The performance of the devices indicated that the branched alkoxyl side chains improved the V_oc, but decreased the J_sc and fill factor (FF). However, the 2D conjugated side chains would increase the V_oc, J_sc, and FF simultaneously. For the first time, our work provides insight into molecular design strategies through side‐chain engineering to achieve efficient polymer solar cells by considering both the degree of branching and dimensionality.     

Wide Band‐Gap Bismuth‐based p‐Dopants for Opto‐Electronic Applications

Ten new efficient p‐dopants for conductivity doping of organic semiconductors for OLEDs are identified. The key advantage of the electrophilic tris(carboxylato) bismuth(III) compounds is the unique low absorption of the resulting doped layers which promotes the efficiency of OLED devices. The combination of these features with their low fabrication cost, volatility, and stability, make these materials very attractive as dopants in organic electronics.     

Fluorine‐Doped Antiperovskite Electrolyte for All‐Solid‐State Lithium‐Ion Batteries

A fluorine‐doped antiperovskite Li‐ion conductor Li₂(OH)X (X=Cl, Br) is shown to be a promising candidate for a solid electrolyte in an all‐solid‐state Li‐ion rechargeable battery. Substitution of F^? for OH^? transforms orthorhombic Li₂OHCl to a room‐temperature cubic phase, which shows electrochemical stability to 9 V versus Li⁺/Li and two orders of magnitude higher Li‐ion conductivity than that of orthorhombic Li₂OHCl. An all‐solid‐state Li/LiFePO₄ with F‐doped Li₂OHCl as the solid electrolyte showed good cyclability and a high coulombic efficiency over 40 charge/discharge cycles.     

High‐refractive‐index and high‐barrier‐capable epoxy‐phenoxy‐based barrier film for organic electronics

A barrier film is a fundamental component of the fast growing organic electronic device industry that is necessary to sustain long‐term stability. The barrier film prevents the permeation of environmental moisture and oxygen into the organic electronic device. Superior barrier property is the most crucial characteristic of a barrier film, in addition to a high refractive index. A high‐refractive‐index barrier film has the potential to reduce the refractive‐index mismatch between a device and a protective film, consequently, reducing the energy costs by increasing the light output. In this work, six epoxy and phenoxy resin composite compositions are synthesized separately, each with a different cross‐linker. POL‐TE1/PET and POL‐HD1/PET films show enhanced refractive indexes of 1.726 (at 750 nm) and 1.721 (at 500 nm), allowing only 71.7% and 70.4% permeation, respectively, compared to those of POL/PET, while exhibiting more than 80% transparency and excellent properties. The films are fabricated using a straightforward process, from a solution, at low temperature and under atmospheric conditions, using an applicator and bar coating.