Analysis and Identification of the Chemical Constituents of Ding‐Zhi‐Xiao‐Wan Prescription by HPLC‐IT‐MSn and HPLC‐Q‐TOF‐MS

Ding‐Zhi‐Xiao‐Wan (DZXW) is a famous traditional Chinese medicine (TCM) formula, which is composed of four herbs, Ginseng Radix, Poria, Polygala Radix and Acori Tatarinowii Rhizoma. It has been popularly used for the treatment of emotional disease, like Alzheimer's disease, Parkinson's disease, depression, anxiety, forgetfulness and neurasthenia. In this research, a high‐performance liquid chromatography coupled with ion‐trap tandem mass spectrometry (HPLC‐IT‐MSⁿ) method along with a high‐performance liquid chromatography coupled with quadrupole time‐of‐flight mass spectrometry (HPLC‐Q‐TOF‐MS) method in negative ion mode was established to investigate the major constitutions in DZXW. The extracts were prepared by ultra‐sonication in ethyl acetate, n‐butanol, 95% ethanol and deionized water sequentially as well as in deionized water directly. A Kromasil C18 column was used to separate the extracts of DZXW. Acetonitrile and 0.1% aqueous formic acid (V/V) were used as the mobile phase. A total of 64 components were characterized, including 16 triterpenoids, 14 Polygala saponins, 10 oligosaccharide esters, 6 sucrose esters, 2 xanthone C‐glycosides and 16 ginsenosides.     

Determination of thiol compounds by HPLC and fluorescence detection with 1,3,5,7‐tetramethyl‐8‐bromomethyl‐difluoroboradiaza‐s‐indacene

Altered levels of thiols in biological fluids are considered to be an important indicator for several diseases. In this article, 1,3,5,7‐tetramethyl‐8‐bromomethyl‐difluoroboradiaza‐s‐indacene is proposed as a fluorescent derivatization reagent for the determination of thiols including glutathione, cysteine, N‐acetylcysteine, and homocysteine by HPLC. Under the optimized derivatization and separation conditions, a baseline separation of all the four derivatives has been achieved using isocratic elution on an RP C₈ column within 26 min. With fluorescence detection at 505 and 525 nm for the excitation and emission, respectively, the LODs (S/N = 3) are from 0.2 nM (glutathione) to 0.8 nM (cysteine). The feasibility of this method in real samples has been evaluated by the determination of thiols in human plasma from the healthy persons and hypertensive patients with recoveries of 92–105.3%.     

Asymmetric hydrogenation of ketones catalyzed by silica‐supported chitosan‐iron‐nickel complex

A new silica‐supported biopolymer‐metal complex, silica‐supported chitosan‐iron‐nickel complex was prepared by a very simple method. This complex catalyst can be used as a catalyst in the asymmetric hydrogenation of propiophenone to (R)‐(+)‐1‐phenyl‐1‐propanol and acetophenone to (R)‐(+)‐1‐phenyl ethanol in 91.7 and 77.7% optical yields, respectively, at 110°C and under 70 kg/cm² pressure. The catalyst could be reused several times without any remarkable change in the catalytic activity. Copyright © 2004 John Wiley & Sons, Ltd.     

A Convenient Synthesis of 2,3‐Dihydro‐3‐methylidene‐1H‐isoindol‐1‐ones by Reaction of 2‐Formylbenzo­nitriles with Dimethyloxosulfonium Methylide

A facile method for the synthesis of 2,3‐dihydro‐3‐methylidene‐1H‐isoindol‐1‐one and its derivatives carrying substituent(s) at C(5) and/or C(6) has been developed. The reaction of 2‐formylbenzonitrile ( 1a ) with dimethyloxosulfonium methylide, generated by the treatment of trimethylsulfoxonium iodide with NaH in DMSO/THF at 0°, resulted in the formation of 2,3‐dihydro‐3‐methylidene‐1H‐isoindol‐1‐one ( 2a ) in 77% yield. Similarly, six 2‐formylbenzonitriles carrying substituent(s) at C(4) and/or C(5), i.e., 1b – 1g , also gave the corresponding expected products 2b – 2g in comparable yields.     

Synthesis of 2‐Aryl‐2,3‐dihydro‐3‐sulfanyl‐1H‐isoindol‐1‐ones by Pummerer‐Type Cyclization of N‐Aryl‐2‐(sulfinylmethyl)benzamides

An efficient method for the synthesis of 2‐aryl‐2,3‐dihydro‐3‐sulfanyl‐1H‐isoindol‐1‐ones 1 via Pummerer‐type cyclization of N‐aryl‐2‐(sulfinylmethyl)benzamides 2 is described. Thus, treatment of these sulfinyl‐benzamides 2 , easily prepared from 2‐(bromomethyl)benzoates 3 in three steps, with Ac₂O at ca. 100° resulted in the formation of the desired isoindolones 1 in generally good yields.     

Preparation of N‐n‐Octyl‐D‐glucamine by the catalytic hydrogenation with palladium complex of MgO‐supported melamine‐formaldehyde polymer

The palladium complex of MgO‐supported melamine‐formaldehyde polymer catalyst was prepared and characterized by X‐ray diffraction (XRD) and X‐ray photoelectron spectroscopy (XPS). The preparation of N‐n‐octyl‐D ‐glucamine was investigated by using this complex as the catalyst. It was found that the palladium complex of MgO‐supported melamine‐formaldehyde polymer has a good catalytic activity for the hydrogenation of n‐octylamine with D ‐glucose to produce N‐n‐octyl‐D ‐glucamine. The effects of additive, solvent, temperature, hydrogen pressure, Pd content in the catalyst and the amount of catalyst on the preparation of N‐n‐octyl‐D ‐glucamine have all been studied. Under the optimum experimental conditions—D ‐glucose, 37.2 mmol; n‐octylamine, 31 mmol; triethylamine, 1.0 ml; ethanol, 60 ml; temperature, 333 K; hydrogen pressure, 1.5 MPa; the amount of the catalyst (Pd content 3.55%, N/Pd molar ratio 12), 0.7 g—the highest yield of N‐n‐octyl‐D ‐glucamine (57.6%) was obtained. XRD results show that melamine‐formaldehyde polymer changed the structure of MgO, and XPS results suggest that coordination bonds were formed between the hexatomic ring and metal atom, and palladium particles were immobilized on the polymer. Copyright © 2004 John Wiley & Sons, Ltd.     

Biotransformation and metabolic profile of caudatin‐2,6‐dideoxy‐3‐O‐methy‐β‐d‐cymaropyranoside with human intestinal microflora by liquid chromatography quadrupole time‐of‐flight mass spectrometry

In our previous studies, caudatin‐2,6‐dideoxy‐3‐O‐methy‐β‐d‐ cymaropyranoside (CDMC) was for the first time isolated from Cynanchum auriculatum Royle ex Wightand and was reported to possess a wide range of biological activities. However, the routes and metabolites of CDMC produced by intestinal bacteria are not well understood. In this study, ultra‐performance liquid chromatography/quadrupole time‐of‐flight mass spectrometry (UPLC‐Q‐TOF‐MS) technique combined with Metabolynx^TMsoftware was applied to analyze metabolites of CDMC by human intestinal bacteria. The incubated samples collected for 48 h in an anaerobic incubator and extracted with ethyl acetate were analyzed by UPLC‐Q‐TOF‐MS within 12 min. Eight metabolites were identified based on MS and MS/MS data. The results indicated that hydrolysis, hydrogenation, demethylation and hydroxylation were the major metabolic pathways of CDMC in vitro. Seven strains of bacteria including Bacillus sp. 46, Enterococcus sp. 30 and sp. 45, Escherichia sp. 49A, sp. 64, sp. 68 and sp. 75 were further identified using 16S rRNA gene sequencing owing to their relatively strong metabolic capacity toward CDMC. The present study provides important information about metabolic routes of CDMC and the roles of different intestinal bacteria in the metabolism of CDMC. Moreover, those metabolites might influence the biological effect of CDMC in vivo, which affects the clinical effects of this medicinal plant. Copyright © 2015 John Wiley & Sons, Ltd.     

Novel Water‐Soluble Shape‐Regulatable Luminescent Nanoparticles by Non‐Covalently Bonded Self‐Assembly

Summary: Novel non‐covalently connected water‐soluble nanoparticles that contain poly(fluorene‐co‐phenylene) with hydroxy‐capped alkoxy side chains (PF3BOH) and poly(acrylic acid) (PAA) have been obtained and characterized. With different proportions of PF3BOH and PAA, the shape and size of the nanoparticles can be regulated. The nanoparticles are quite stable in water with no precipitate being observed after weeks. Transmission electron microscopy and dynamic laser light scattering are used to confirm the morphology of the PF3BOH/PAA nanoparticles. Their optical properties have been investigated and show similar optoelectronic properties to a PF3BOH solid film although they do not undergo aggregation.

TEM images of the nanoparticles obtained upon varying the PAA/PF3BOH content.     

An Efficient One‐pot Synthesis of 2‐Amino‐5‐arylidenethiazol‐4‐ones Catalyzed by MgO Nanoparticles

A mild and efficient protocol for the synthesis of 2‐amino‐5‐arylidene‐1,3‐thiazol‐4(5H)‐ones is reported by three component reaction of aldehydes, rhodanine and secondary amines in the presence of magnesium oxide nanoparticles as heterogeneous nanocatalyst in good yields and short reaction times.     

Organocatalytic Stereoselective Synthesis of 3‐Alkyl‐3‐hydroxy‐2‐oxindoles Catalyzed by Novel Water‐compatible Axially Unfixed Biaryl‐based Bifunctional Organocatalysts

In this work, six novel axially unfixed biaryl‐based water‐compatible bifunctional organocatalysts were designed and synthesized for the organocatalytic access to a variety of 3‐alkyl‐3‐hydroxy‐2‐oxindole derivatives via aldol reactions in water. Organocatalyzed by 5a , the direct aldol reactions of isatins with enolisable ketones underwent readily in water, furnishing the structurally diverse 3‐alkyl‐3‐hydroxy‐2‐oxindoles in various stereoselectivities (up to>99% dr and >99% ee). Moreover, a plausible transition state of the conducted aldol reactions was hypothesized to shed light on the observed stereoselectivities of the obtained 3‐alkyl‐3‐hydroxy‐2‐oxindoles.     

Separation of 1,3,5,7‐tetranitro‐1,3,5,7‐tetraazacyclooctane and 1,3,5‐trinitro‐1,3,5‐ triazacyclohexane by molecularly imprinted solid‐phase extraction

Synthesis of 1,3,5,7‐tetranitro‐1,3,5,7‐tetraazacyclooctane and 1,3,5‐trinitro‐1,3,5‐triazacyclohexane by the Bachmann process leads to a mixture of both. The separation of 1,3,5,7‐tetranitro‐1,3,5,7‐tetraazacyclooctane and 1,3,5‐trinitro‐1,3,5‐triazacyclohexane from their mixture is difficult because the sizes and physical properties of these homologous compounds are similar. For this purpose, seven molecularly imprinted polymers have been synthesized for each explosive, and a selective solid‐phase extraction procedure has been developed. A molecularly imprinted polymer, synthesized with 1,3,5,7‐tetranitro‐1,3,5,7‐tetraazacyclooctane as the template, methacrylic acid as the monomer and trimethylolpropane trimethacrylate as the cross‐linking agent in a molar ratio of 1:8:8 showed the best separation capability. A packed cartridge containing this polymer can be reused for 23 solid‐phase extraction cycles without repacking, and the total separation capability toward 1,3,5,7‐tetranitro‐1,3,5,7‐tetraazacyclooctane reached 6.81 mg per gram of polymer. 1,3,5‐Trinitro‐1,3,5‐triazacyclohexane was not detected in the separated 1,3,5,7‐tetranitro‐1,3,5,7‐tetraazacyclooctane by high‐performance liquid chromatography and vice versa. This newly developed method had the advantages of high recovery (100%) and purity, environmental friendliness, and room temperature operability. This study showed that some molecularly imprinted polymers that cannot absorb target analytes well in the solvent in which the polymers were polymerized might have high‐binding capacity for the analytes and show imprinting effects in other solvents.     

One‐Pot Synthesis of 3‐Alkoxy‐2,3‐dihydro‐1H‐isoindol‐1‐ones by the Reactions of 2‐(Azidomethyl)benzoates with NaH

A new and facile method for the general preparation of 3‐alkoxy‐2,3‐dihydro‐1H‐isoindol‐1‐ones has been developed. Thus, the reaction of 2‐(azidomethyl)benzoates with NaH affords, after workup with H₂O, 3‐alkoxy‐2,3‐dihydro‐1H‐isoindol‐1‐ones 2 . 2‐Substituted 3‐alkoxy‐2,3‐dihydro‐1H‐isoindol‐1‐ones 4 can be obtained by adding alkyl halides prior to workup with H₂O.     

Metabolic profile of phillyrin in rats obtained by UPLC‐Q‐TOF‐MS

Forsythia suspensa Vahl (Oleaceae) is an important original plant in traditional Chinese medicine. The air‐dried fruits of Forsythia suspensa have long been used to relieve respiratory symptoms. Phillyrin is one of the main chemical constituent of Forsythia suspensa. A clear understanding of the metabolism of phillyrin is very important in rational clinical use and pharmacological research. In this study, the metabolism of phillyrin in rat was investigated for the first time using an ultra‐high‐performance liquid chromatography quadrupole time‐of‐flight mass spectrometry (UPLC‐Q‐TOF‐MS) method. Bile, urine and feces were collected from rats after single‐dose (10 mg/kg) orally administered phillyrin. Liquid–liquid extraction and ultrasonic extraction were used to prepare samples. UPLC‐Q‐TOF‐MS analysis of the phillyrin samples showed that phillyrin was converted to a major metabolite, M26, which underwent deglucosidation, further dehydration and desaturation. A total of 34 metabolites were detected including 30 phase I and four phase II metabolites. The conjugation types and structure skeletons of the metabolites were preliminarily determined. Moreover, 28 new metabolites were reported for the first time. The main biotransformation route of phillyrin was identified as hydrolysis, oxidation and sulfation. These findings enhance our understanding of the metabolism and the real active structures of phillyrin. Copyright © 2015 John Wiley & Sons, Ltd.     

Preparative isolation of flavonoid compounds from Oroxylum indicum by high‐speed counter‐current chromatography by using ionic liquids as the modifier of two‐phase solvent system

A preparative high‐speed counter‐current chromatography method for isolation and purification of flavonoid compounds from Oroxylum indicum was successfully established by using ionic liquids as the modifier of the two‐phase solvent system. Two flavonoid compounds including baicalein‐7‐O‐diglucoside and baicalein‐7‐O‐glucoside were purified from the crude extract of O. indicum by using ethyl acetate–water–[C₄mim][PF₆] (5:5:0.2, v/v) as two‐phase solvent system. 36.4 mg of baicalein‐7‐O‐diglucoside and 60.5 mg of baicalein‐7‐O‐glucoside were obtained from 120 mg of the crude extract. Their purities were 98.7 and 99.1%, respectively, as determined by HPLC area normalization method. The chemical structures of the isolated compounds were identified by ¹H‐NMR and ¹³C‐NMR.     

Competitive heavy metal removal by poly(2‐acrylamido‐2‐methyl‐1‐propane sulfonic acid‐co‐itaconic acid)

The competitive removal of Pb²⁺, Cu²⁺, and Cd²⁺ ions from aqueous solutions by the copolymer of 2‐acrylamido‐2‐methyl‐1‐propane sulfonic acid (AMPS) and itaconic acid (IA), P(AMPS‐co‐IA), was investigated. Homopolymer of AMPS (PAMPS) was also used to remove these ions from their aqueous solution. In the preparation of AMPS–IA copolymer, the molar percentages of AMPS and IA were 80 and 20, respectively. In order to observe the changes in the structures of polymers due to metal adsorption, FTIR spectra by attenuated total reflectancetechnique and scanning electron microscopy (SEM) pictures of the polymers were taken both before and after adsorption experiments. Total metal ion removal capacities of PAMPS and P(AMPS‐co‐IA) were 1.685 and 1.722 mmol Me²⁺/g_polymer, respectively. Experimental data were evaluated to determine the kinetic characteristics of the adsorption process. Competitive adsorption of Pb²⁺, Cu²⁺, and Cd²⁺ ions onto both PAMPS and P(AMPS‐co‐IA) was found to fit pseudo‐second‐order type kinetics. In addition, the removal orders in the competitive adsorption of these metal ions onto PAMPS and P(AMPS‐co‐IA) were found to be Cd²⁺ > Pb²⁺ > Cu²⁺ and Pb²⁺ > Cd²⁺ > Cu²⁺, respectively. Copyright © 2008 John Wiley & Sons, Ltd.