双二苯基-1-甲基咪唑膦氯化镍的制备及其电催化还原CO2的研究

以二苯基-1-甲基咪唑膦（dpim）为配体制备了一种新型的配合物催化剂Ni(dpim)₂Cl₂. 循环伏安研究表明,Ni(dpim)₂Cl₂配合物在氮气气氛下表现出两步还原的电化学行为,在-0.7 V下为两电子的不可逆还原,在-1.3 V下为单电子准可逆还原. 向电解液中通入CO₂后,在-1.3 V下的还原峰变得不可逆,且其峰电流从0.48 mA·cm^-2增大到0.55 mA·cm^-2. 在质子源（CH₃OH）存在的条件下,该还原峰电流可继续增大到0.72 mA·cm^-2. 该研究结果表明,Ni(dpim)₂Cl₂配合物对CO₂还原具有良好的电催化性能,且其电催化还原过程符合ECE机理. 在-1.3 V下恒电位电解得到的还原产物主要为CO,催化转换频率（Turnover of Frenquency, TOF）为0.17 s^-1.     

Ni2P纳米片用于光催化二氧化碳还原

Artificial photosynthesis is an ideal method for solar-to-chemical energy conversion, wherein solar energy is stored in the form of chemical bonds of solar fuels. In particular, the photocatalytic reduction of CO₂ has attracted considerable attention due to its dual benefits of fossil fuel production and CO₂ pollution reduction. However, CO₂ is a comparatively stable molecule and its photoreduction is thermodynamically and kinetically challenging. Thus, the photocatalytic efficiency of CO₂ reduction is far below the level of industrial applications. Therefore, development of low-cost cocatalysts is crucial for significantly decreasing the activation energy of CO₂ to achieving efficient photocatalytic CO₂ reduction. Herein, we have reported the use of a Ni₂P material that can serve as a robust cocatalyst by cooperating with a photosensitizer for the photoconversion of CO₂. An effective strategy for engineering Ni₂P in an ultrathin layered structure has been proposed to improve the CO₂ adsorption capability and decrease the CO₂ activation energy, resulting in efficient CO₂ reduction. A series of physicochemical characterizations including X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS), transmission electron microscopy (TEM), high-resolution transmission electron microscopy (HRTEM), and atomic force microscopy (AFM) were used to demonstrate the successful preparation of ultrathin Ni₂P nanosheets. The XRD and XPS results confirm the successful synthesis of Ni₂P from Ni(OH)₂ by a low temperature phosphidation process. According to the TEM images, the prepared Ni₂P nanosheets exhibit a 2D and near-transparent sheet-like structure, suggesting their ultrathin thickness. The AFM images further demonstrated this result and also showed that the height of the Ni₂P nanosheets is ca 1.5 nm. The photoluminescence (PL) spectroscopy results revealed that the Ni₂P material could efficiently promote the separation of the photogenerated electrons and holes in [Ru(bpy)₃]Cl₂·6H₂O. More importantly, the Ni₂P nanosheets could more efficiently promote the charge transfer and charge separation rate of [Ru(bpy)₃]Cl₂·6H₂O compared with the Ni₂P particles. In addition, the electrochemical experiments revealed that the Ni₂P nanosheets, with their high active surface area and charge conductivity, can provide more active centers for CO₂ conversion and accelerate the interfacial reaction dynamics. These results strongly suggest that the Ni₂P nanosheets are a promising material for photocatalytic CO₂ reduction, and can achieve a CO generation rate of 64.8 μmol·h^-1, which is 4.4 times higher than that of the Ni₂P particles. In addition, the XRD and XPS measurements of the used Ni₂P nanosheets after the six cycles of the photocatalytic CO₂ reduction reaction demonstrated their high stability. Overall, this study offers a new function for the 2D transition-metal phosphide catalysts in photocatalytic CO₂ reduction.     

Luminescence properties of CdTe QDs embedded in Zn5(CO3)2(OH)6 matrix

CdTe@Zn₅(CO₃)₂(OH)₆ composites were synthesized by a hydrothermal method. CdTe@Zn₅(CO₃)₂(OH)₆ composite nanospheres were characterized via X-ray diffraction, scanning electron microscopy, energydispersive X-ray spectroscopy, and photoluminescence (PL). The hydrothermal reaction time and the mole ratios of Zn/Te played important roles in the growth and fluorescence intensity of CdTe@Zn₅(CO₃)₂(OH)₆ composites. The composite powders showed peak PL at 578 nm at 1.6 times the intensity of powdered CdTe QDs. CdTe@Zn₅(CO₃)₂(OH)₆ exhibited a strong yellow fluorescence emission, and its preparation method was easy and economical. Therefore, CdTe@Zn₅(CO₃)₂(OH)₆ offers potential applications in biological markers and light-emitting diodes.     

BMIMBF4中2-氨基-3-氯-1,4-萘醌电化学捕获CO2的机理

利用循环伏安法（CV）和现场红外光谱电化学技术研究了2-氨基-3-氯-1,4-萘醌（ACNQ）在1-丁基-3-甲基咪唑四氟硼酸盐（BMIMBF₄）中电化学捕获CO₂的机理.研究结果表明,当体系中不存在CO₂时,ACNQ在BMIMBF₄中经历可逆的两步一电子过程;当体系中引入CO₂时,电化学还原过程中形成的二价阴离子（ACNQ^2-）作为亲核试剂,可攻击CO₂的亲电子碳中心,形成稳定的CO₂加合物.对电化学捕获CO₂的化学计量进行了评估,结果表明,1摩尔的ACNQ^2-可捕获1摩尔的CO₂.结合B3LYP方法在6-311++G^**水平上计算分析了反应中CO₂加合物可能的结构.     

基于单原子催化剂的二氧化碳选择性转化

Industrial revolution has led to increased combustion of fossil fuels. Consequently, large amounts of CO₂ are emitted to the atmosphere, throwing the carbon cycle out of balance. Currently, the most effective method to reduce the CO₂ concentration is direct CO₂ capture from the atmosphere and pumping of the captured CO₂ deep underground or into the mid-ocean. The transformation of CO₂ into high-value chemicals is an attractive yet challenging task. In recent years, there has been much interest in the development of CO₂ utilization technologies based on electrochemical CO₂ reduction, photochemical CO₂ reduction, and thermal CO₂ reduction, and CO₂ valorization has emerged as a hot research topic. In electrochemical CO₂ reduction, the cathodic reaction is the reduction of CO₂ to value-added chemicals. The anodic reaction should be the oxygen evolution reaction, and water is the only renewable and scalable source of electrons and protons in this reaction. There is a plethora of research on the use of various metals to catalyze this reaction. Among these, Cu-based materials have been demonstrated to show unique catalytic activity and stability for the electrochemical conversion of CO₂ to valuable fuels and chemicals. Moreover, the solar-driven conversion of CO₂ into value-added chemical fuels has attracted great attention, and much effort is being devoted to develop novel catalysts for the photoreduction of CO₂, especially by mimicking the natural photosynthetic process. The key step in the photocatalytic process is the efficient generation of electron-hole pairs and separation of these charge carriers. The efficient separation of photoinduced charge carriers plays a crucial role in the final catalytic activity. Compared with CO₂ reduction via electrocatalysis and photocatalysis, thermal reduction is more attractive because of its potential large-scale application in the industry. Heterogeneous nanomaterials show excellent activity in the electrocatalytic, photocatalytic, and thermal catalytic conversion of CO₂. However, nanostructured materials have drawbacks on the investigation of the intrinsic activity of the active sites. In recent years, single-site catalysts have become popular because they allow for maximum utilization of the metal centers, show specific catalytic performance, and facilitate easy elucidation of the catalytic mechanism at the molecular level. Accordingly, numerous single-site catalysts were developed for CO₂ reduction to produce value-added chemicals such as CO, CH₄, CH₃OH, formate, and C₂₊ products. Value-added chemicals have also been synthesized with the aid of amines and epoxides. This review summarizes recent state-of-the-art single-site catalysts and their application as heterogeneous catalysts for the electroreduction, photoreduction, and thermal reduction of CO₂. In the discussion, we will highlight the structure-activity relationships for the catalytic conversion of CO₂ with single-site catalysts.     

二维/一维BiOBr0.5Cl0.5/WO3 S型异质结助力光催化CO2还原

S型异质结不但可以提高载流子的分离效率,还可以维持较强的氧化还原能力。因此,构建S型异质是提高光催化二氧化碳还原反应的有效途径。本研究通过静电自组装法构建了具有近红外光响应(> 780 nm)的二维BiOBr_0.5Cl_0.5纳米片和一维WO₃纳米棒S型异质结光催化剂,并用于高效还原二氧化碳。能带位置和界面电子相互作用的综合分析表明：在光催化二氧化碳还原反应过程中,BiOBr_0.5Cl_0.5/WO₃遵循S型电子转移路径;不仅提高了载流子的高效分离,还维持了两相(BiOBr_0.5Cl_0.5和WO₃)较高的氧化还原能力。此外,二维纳米片/一维纳米棒的结构使得半导体之间具备良好的界面接触,有利于载流子的分离,且暴露更多的活性位点,最终提高催化效率。结果显示,BiOBr_0.5Cl_0.5/WO₃异质结催化剂表现出较高的CO₂还原能力和CO选择性,CO的产率高达16.68 μmol∙g^-1∙h^-1,分别是BiOBr_0.5Cl_0.5的1.7倍和WO₃的9.8倍。本工作为构建S型二维/一维异质结光催化剂高效还原二氧化碳提供了新的思路。     

氨基修饰的金属有机框架Cu_3(BTC)_2的制备及其CO_2吸附性能研究

首先制备了嫁接氨基的均苯三甲酸,同时以其为原料通过溶剂热法合成了金属有机框架材料Cu_3(NH_2BTC)_2,利用XRD、N_2吸附-脱附、热重、红外、原位红外分析等表征手段对吸附剂进行了表征,并通过固定床测量穿透曲线的方法研究其CO_2吸附性能。结果表明,氨基被成功引入Cu_3(BTC)_2骨架中。氨基修饰的Cu_3(BTC)_2对CO_2有着较高的吸附容量,在10 kPa,50℃的条件下CO_2吸附量为1.41 mmol/g,这源于材料对于CO_2同时存在着物理吸附和化学吸附。     

Synthesis and characterization of Na5[Co(CO)3(P{(CH2)nC6H4-P-SO3}3)2], n = 1, 2, 3, and 6. Novel zwitterion

The electron donating water soluble phosphines, P{(CH₂)nC₆H₄-p-SO₃Na}₃,n = 1, 2, 3 and 6, react rapidly with Co₂(CO)₈ under two phase reaction conditions to yield the disproportionation products, [Co(CO)₃(P{(CH₂)nC₆H₄-p-SO₃Na₃}₂] [Co(CO)₄]. Selective precipitation yields the formally zwitterionic complex anions as the sodium salt, [Co(CO)₃(P{(CH₂)nC₆H₄-p-SO₃} ₃)₂]⁵⁻. The anions can be used as precursors to water soluble cobalt hydroformylation catalysts under two phase and supported aqueous phase conditions. The tendency to form alcohol products is low with these complexes. The behavior of the catalysts is consistent with an active species that remains water soluble during the reaction and is not leached into the nonaqueous phase.     

Synthesis, catalytic activity and the molecular structure of (μ3-CCH3)Co3(CO)7-μ-(Ph2PCH2PPh2)

Reaction of (μ₃-CCH₃)CO₃(CO)₉ (I) with dppm (dppm = bis-(diphenylphosphino)methane) affords the cluster (μ₃-CCH₃)Co₃(CO)₇-dppm (II). The crystal and molecular structure of II have been determined at −160°C. The dppm ligand bridges one of the three metal—metal edges in the equatorial plane to give a five-membered ring, which adopts an envelope conformation.

Cluster II functions as a catalyst for the hydroformylation of 1-pentene (80 bar of H₂/CO (1/1); 110°C). The results indicate that the dppm bridging ligand stabilizes and activates the cluster for catalysis, and open the way to the synthesis of chiral clusters.     

钯基纳米材料电化学还原二氧化碳研究进展

电化学二氧化碳还原是利用电能驱动将CO_2高效转化为小分子碳基燃料的新方法,被认为是目前最具应用潜力的碳资源转化技术之一。然而,CO_2还原反应仍面临着诸多挑战,如反应过电位高,产物选择性低以及析氢反应的竞争等。因此,开发高效的电催化剂是发展CO_2还原技术的核心关键。近年来,Pd基材料在CO_2还原反应中表现出独特的催化性能优势:它不仅可以在接近平衡电位下高选择性地还原CO_2生成甲酸/甲酸盐,还能够在一定的负电位区间高效地还原CO_2生成CO。尽管如此,Pd基材料目前仍存在着成本较高、活性不理想以及稳定性差等问题,严重制约了其进一步应用与发展。对此,本文首先简单介绍了CO_2RR的基本原理,并综述了近年来Pd基催化剂电还原CO_2的应用研究及发展现状。重点探讨了尺寸效应、形貌效应、合金效应、核壳效应及载体效应等对Pd基催化剂性能的影响。最后针对这类材料的问题挑战及其未来发展方向进行了探讨与展望。     

铋基二氧化碳还原电催化材料研究进展

二氧化碳（CO₂）作为一种经济、安全、可再生的碳资源化合物,其高效回收利用一直是全社会关注的焦点. 利用电化学方法,将CO₂还原转化生成一系列高附加值的化学品或燃料,对于缓解能源与环境双重压力具有重要的现实意义. 本论文介绍了电化学CO₂还原反应的基本原理与过程,综述了近年来铋基催化材料的发展现状,重点对这类催化材料的制备合成、结构调控、催化反应机理研究等方面进行了总结,最后对其未来发展方向进行了探讨与展望.     

Synthesis of Mg5(CO3)4(OH)2·4H2O with Flower-like Microstructure and Its Catalytic Activity for Transesterification of Dimethyl Carbonate with Phenol

A novel flower-like hydrated magnesium carbonate hydroxide,Mg_5(CO_3)_4(OH)_2·4H_2O,with micro-structure composed of individual thin nano-sheets was synthesized using a facile solution route without the use of template or organic surfactant.Reaction time has an important effect on the final morphology of the product.The micro-structure and morphology of Mg_5(CO_3)_4(OH)_2·4H_2O were characterized by means of X-ray diffractometry(XRD),field-emission scanning electron microscopy(FE-SEM).Brunauer-Emmett-Teller(BET)surface areas of the samples were also measured.The probable formation mechanism of flower-like micro-structure was discussed.It was found that Mg_5(CO_3)_4(OH)_2·4H_2O with flower-like micro-structure was a novel and efficient catalyst for the synthesis of diphenyl carbonate(DPC)by transesterification of dimethyl carbonate(DMC)with phenol.     

铜基串联催化剂电催化CO2还原的研究进展

化石燃料的燃烧和其他人类活动排放了大量的CO₂气体,引发了诸多环境问题。电催化CO₂还原反应(CO₂RR)可以储存间歇可再生能源,实现人为闭合碳循环,被认为是获得高附加值化学品和燃料的有效途径。电催化CO₂RR涉及多个电子-质子转移步骤,其中^*CO通常被认为是关键中间体。铜由于对^*CO具有合适的吸附能,已被广泛证明是唯一能够有效地将CO₂还原为碳氢化合物和含氧化合物的金属催化剂。然而,纯Cu稳定性差、产品选择性低、过电位高,阻碍了工业级多碳产品的生产。构筑Cu基串联催化剂是提高CO₂RR性能的一种有前途的策略。本文首先介绍电催化CO₂RR的反应路线和串联机理。然后,系统地总结铜基串联催化剂对电催化CO₂RR的最新研究进展。最后,提出合理设计和可控合成新型电催化CO₂RR串联催化剂面临的挑战和机遇。     

Nitrogen-doped Carbon Coated Na3V2(PO4)3 with Superior Sodium Storage Capability

Cathodes with high cycling stability and rate capability are required for ambient temperature sodium ion batteries in renewable energy storage application. Na₃V₂(PO₄)₃ is an attractive cathode material with excellent electrochemical stability and fast ion diffusion coefficient within the 3D NASICON structure. Nevertheless, the practical application of Na₃V₂(PO₄)₃ is seriously hindered by its intrinsically poor electronic conductivity. Herein, solvent evaporation method is presented to obtain the nitrogen-doped carbon coated Na₃V₂(PO₄)₃ cathode material, delivering enhanced electrochemical performances. N-Doped carbon layer coating serves as a highly conducting pathway, and creates numerous extrinsic defects and active sites, which can facilitate the storage and diffusion of Na⁺. Moreover, the N-doped carbon layer can provide a stable framework to accommodate the agglomeration of the electrode upon electrode cycling. N-Doped carbon coated Na₃V₂(PO₄)₃(NC-NVP) exhibits excellent long cycling life and superior rate performances than bare Na₃V₂(PO₄)₃ without carbon coating. NC-NVP delivers a stable capacity of 95.9 mA·h/g after 500 cycles at 1 C rate, which corresponds to high capacity retention(94.6%) with respect to the initial capacity(101.4 mA·h/g). Over 91.3% of the initial capacity is retained after 500 cycles at 5 C, and the capacity can reach 85 mA·h/g at 30 C rate.     

Electron transfer in organometallic clusters : XI. Redox chemistry of M3(CO)12(M = Ru, Os) and PPh3 derivatives; mechanism of catalysed nucleophilic substitution

The generality of a two-electron reduction process involving an mechanism has been established for M₃(CO)₁₂ and M₃(CO)₁₂−n(PPh₃)_n (M = Ru, Os) clusters in all solvents. Detailed coulometric and spectral studies in CH₂Cl₂ provide strong evidence for the formation of an ‘opened’ M₃(CO)₁₂²⁻ species the triangulo radical anions M₃(CO)₁₂^−· having a half-life of < 10⁻⁶ s in CH₂Cl₂. However, the electrochemical response is sensitive to the presence of water and is concentration dependent. An electrochemical response for “opened” M₃(CO)₁₂²⁻ is only detected at low concentrations < 5 × 10⁻⁴ mol dm⁻³ and under drybox conditions. The electroactive species ground at higher concentrations and in the presence of water M₃(CO)₁₁²⁻ and M₆(CO)₁₈²⁻ were confirmed by a study of the electrochemistry of these anions in CH₂Cl₂; HM₃(CO)₁₁⁻ is not a product. The couple [M₆(CO)₁₈]^−/2− is chemically reversible under certain conditions but oxidation of HM₃(CO)₁₁⁻ is chemically irreversible. Different electrochemical behaviour for Ru₃(CO)₁₂ is found when [PPN][X] (X = OAc⁻, Cl⁻) salts are supporting electrolytes. In these solutions formation of the ultimate electroactive species [μ-C(O)XRu₃(CO)₁₀]⁻ at the electrode is stopped under CO or at low temperatures but Ru₃(CO)₁₂^−· is still trapped by reversible attack by X presumably as [η¹-C(O)XRu₃(CO)₁₁]⁻. It is shown that electrode-initiated electron catalysed substitution of M₃(CO)₁₂ only takes place on the electrochemical timescale when M = Ru, but it is slow, inefficient and non-selective, whereas BPK-initiated nucleophilic substitution of Ru₃(CO)₁₂ is only specific and fast in ether solvents particulary THF. Metal---metal bond cleavage is the most important influence on the rate and specificity of catalytic substitution by electron or [PPN]-initiation. The redox chemistry of M₃(CO)₁₂ clusters (M = Fe, Ru, Os) is a consequence of the relative rates of metal---metal bond dissociation, metal-metal bond strength and ligand dissociation and in many aspects resembles their photochemistry.     

上转换纳米粒子的Y(OH)CO3壳层包覆及壳层转化

Along with the promising applications of lanthanide doped upconversion nanomaterials in diverse fields such as biology, anti-counterfeiting, and lasering, the demand for multifunctional upconversion nanomaterials is increasing. One effective means of obtaining these nanomaterials is to fabricate upconversion nanomaterial-based heterostructures, which may provide superior properties as compared to the sum of the parts. However, obtaining heterostructured upconversion nanomaterials remains challenging mainly because of the crystal lattice mismatch between upconversion nanomaterials and other materials. Typically used strategies for synthesizing upconversion nanomaterial-based heterostructures are applicable only to limited types of materials. Alternatively, transformation of the intermediate layer is a promising strategy used to obtain these heterostructures. Nevertheless, this method remains in its infancy and, to date, only a few intermediate layers have been developed. New types of intermediate layers are therefore highly desirable. In this study, we show that amorphous Y(OH)CO₃ can be a promising candidate as an intermediate layer for fabricating upconversion nanoparticle-based heterostructures. As a proof-of-concept experiment, ligand-free NaGdF₄:Yb/Tm upconversion nanoparticles were first prepared as core nanoparticles. The Y(OH)CO₃ shell was then directly coated on the NaGdF₄:Yb/Tm upconversion nanoparticles in an aqueous solution using urea and Y(NO₃)₃, by a homogeneous precipitation approach. The thickness of the resulting Y(OH)CO₃ shell could be tuned by adjusting the amounts of either urea or Y(NO₃)₃. The as-coated Y(OH)CO₃ shell could be easily converted to YOF by heating at 300 ℃, yielding NaGdF₄:Yb/Tm@YOF core-shell heterostructured nanoparticles. In addition, we found that the NaGdF₄ core could be transformed to lanthanide oxide fluoride if the NaGdF₄:Yb/Tm@Y(OH)CO₃ core-shell nanoparticles were heated at 350 ℃. We also observed that treating the NaGdF₄:Yb/Tm@Y(OH)CO₃ core-shell nanoparticles at even higher temperatures (e.g., 400 ℃) produced aggregations of nanoparticles without regular morphologies. The transformation of the shell can be attributed to the decomposition of Y(OH)CO₃ and reactions between the Y(OH)CO₃ shell and NaGdF₄ core. Meanwhile, the transformation of the NaGdF₄ core at relatively high temperatures could be primarily due to the reactions between Y(OH)CO₃ and NaGdF₄. Notably, in this study, the core-shell structured nanoparticles, with either a Y(OH)CO₃ or YOF shell, maintained the photon upconversion properties of NaGdF₄:Yb/Tm upconversion nanoparticles. In addition, the method used here could be extended to the coating of other shells such as Tb(OH)CO₃ and Yb(OH)CO₃ on upconversion nanoparticles. Moreover, the NaGdF₄:Yb/Tm@Y(OH)CO₃ core-shell nanoparticles could be transformed to other nanoparticles with novel structures such as yolk-shell nanoparticles. These results can pave the way for preparing upconversion nanoparticle-based heterostructures and multifunctional composites, thus promoting new applications of upconversion nanoparticles.     

TiO_2纳米管电极上电化学还原CO_2生成CH_3OH

采用原位阳极氧化-煅烧法制备TiO_2纳米管(TiO_2NTs)电极,运用X射线衍射(XRD)、电场发射扫描电子显微镜(FESEM)、X射线光电子能谱(XPS)、双电位阶跃测试等对制备电极进行表征,考察了其在0.1mol?L~(-1) KHCO_3水溶液中电化学还原CO_2的催化活性。结果表明TiO_2NTs电极上电化学还原CO_2的主产物为CH_3OH,CH_3OH由HCOOH和HCHO进一步还原而来。电极制备的最佳煅烧温度为450℃(TiO_2NTs-450),电解电位-0.56 V(vs RHE(可逆氢电极))时反应120 min后,生成CH_3OH的法拉第效率和分电流密度分别为85.8%和0.2 m A?cm~(-2)。与550和650℃煅烧的电极相比,TiO_2NTs-450电极具有更高的催化活性,归因于电极表面更多的三价钛活性位,有利于CO_2吸附,从而对·CO_2-起到稳定的作用,速率控制步骤转变为·CO_2-的质子化反应。     

铜基串联催化剂电催化CO2还原的研究进展

Through the combustion of fossil fuels and other human activities, large amounts of CO₂ gas have been emitted into the atmosphere, causing many environmental problems, such as the greenhouse effect and global warming. Thus, developing and utilizing renewable clean energy is crucial to reduce CO₂ emission and achieve carbon neutrality. The electrochemical CO₂ reduction reaction (CO₂RR) has been considered as an effective approach to obtain high value-added chemicals and fuels, which can store intermittent renewable energy and achieve the artificial carbon cycle. In addition, due to its multiple advantages, such as mild reaction conditions, tunable products, and simple implementation, electrochemical CO₂RR has attracted extensive attention. Electrochemical CO₂RR involves multiple electron–proton transfer steps to obtain multitudinous products, such as C₁ products (CO, HCOOH, CH₄, etc.) and C₂ products (C₂H₄, C₂H₅OH, etc.). The intermediates, among which ^*CO is usually identified as the key intermediate, and reaction pathways of different products intersect, resulting in an extremely complex reaction mechanism. Currently, copper has been widely proven to be the only metal catalyst that can efficiently reduce CO₂ to hydrocarbons and oxygenates due to its suitable adsorption energy for ^*CO. However, the low product selectivity, poor stability, and high overpotential of pure Cu hinder its use for the production of industrial-grade multi-carbon products. Tandem catalysts with multiple types of active sites can sequentially reduce CO₂ molecules into desired products. When loaded onto a co-catalyst that can efficiently convert CO₂ to ^*CO (such as Au and Ag), Cu acts as an electron donor owing to its high electrochemical potential. ^*CO species generated from the substrate can spillover onto the surface of electron-poor Cu due to the stronger adsorption and be further reduced to C₂₊ products. The use of Cu-based tandem catalysts for electrochemical CO₂RR is a promising strategy for improving the performance of CO₂RR and thus, has become a research hotspot in recent years. In this review, we first introduce the reaction routes and tandem mechanisms of electrochemical CO₂RR. Then, we systematically summarize the recent research progress of Cu-based tandem catalysts for electrochemical CO₂RR, including Cu-based metallic materials (alloys, heterojunction, and core-shell structures) as well as Cu-based framework materials, carbon materials, and polymer-modified materials. Importantly, the preparation methods of various Cu-based tandem catalysts and their structure–activity relationship in CO₂RR are discussed and analyzed in detail. Finally, the challenges and opportunities of the rational design and controllable synthesis of advanced tandem catalysts for electrochemical CO₂RR are proposed.     

铝源对Ni/Al2 O3催化剂结构及其CO2-CH4重整性能的影响

以三种不同铝源采用溶液燃烧法制备了系列Ni/Al_2O_3催化剂,通过XRD、H_2-TPR、NH_3-TPD、N_2吸附-脱附、TGDTG和TPH等分析方法对反应前后催化剂进行了表征,研究了铝源对Ni/Al_2O_3催化剂结构、表面性质及其CO_2-CH_4重整性能的影响。结果表明,以Al(NO_3)_3·9H_2O为铝源制备的NiNO-AlNO催化剂比表面积较大,达102 m~2/g;高温还原峰面积大,峰型更为弥散;且载体Al_2_O_3具有一定的结晶性。而以Al_2(SO_4)_3·18H_2O和AlCl_3·6H_2O为铝源制备的NiNO-AlSO和NiNO-AlCl催化剂,其载体以无定型Al_2O_3存在,活性组分Ni晶粒粒径大、分散性差,还原峰面积较小,与载体的相互作用较弱。其中,由于硫酸铝较为稳定,需要在更高温度下才能转化为Al_2O_3,且所制备NiNO-AlSO催化剂中残留有含硫物质,使得其表面酸性较强。评价结果显示,NiNO-AlNO催化剂活性较高,稳定性好,CH4转化率为31.21%,CO_2转化率为48.97%。积炭分析结果发现,NiNO-AlNO催化剂表面积炭量最少,沉积炭主要以无定型态存在,具有良好的抗积炭性能。     

液相共存成分对氨法脱碳吸收液解吸CO2的影响研究

考察了烟气中SO₂、NO_x和CO₂与氨水的反应机理,研究了模拟解吸液解吸过程中主要液相共存成分,如(NH₄)₂SO₃、(NH₄)₂SO₄、NH₄NO₃、NaCl、NH₄Cl和(NH₄)₂CO₃对CO₂解吸的影响.研究表明,不同液相共存成分、质量分数、pH值、表面张力等对CO₂解吸产生一定影响,大部分液相共存成分的存在,会降低脱碳溶液CO₂的解吸量.质量分数低于10％的液相共存组分对脱碳吸收液CO₂解吸过程的制约作用依次为(NH₄)₂SO₃>NH₄NO₃>(NH₄)₂SO₄>NaCl>(NH₄)₂CO₃.因此,在碳捕集前应对烟气中的杂质成分进行脱除,减少其对解吸液理化特性的影响.