Tuning the hydrogen and hydroxyl adsorption on Ru nanoparticles for hydrogen electrode reactions via size controlling

Controlling the particle size of catalyst to understand the active sites is the key to design efficient electrocatalysts toward hydrogen electrode reactions including hydrogen oxidation and evolution (HOR/HER). Herein, the hydrogen and hydroxyl adsorption on Ru/C could be effectively tuned for HOR/HER by simple controlling the particle sizes. It is found that the metallic Ru (Ru⁰) is the active site for HOR/HER, while oxidized Ru (Ru^x+) will hinder the adsorption and desorption of hydrogen on the catalyst. For the HOR, catalyst with small particles is more efficient, due to it is a three-phase interface reaction of gas on the surface of the catalyst. For the HER, the metallic state of Ru is crucial. The deconvolution of hydrogen peaks indicates that the catalytic sites with low hydrogen binding energy (HBE) shoulder the majority of the HOR activity. CO stripping curve further demonstrates that the stronger hydroxyl species (OH_ad) affinity is beneficial to promote the HOR performance. The results indicate that the design of efficient HOR/HER catalyst should focus on the balance between particle size and metallic states.     

Ru Nanoparticles Supported on Co-Embedded N-Doped Carbon Nanotubes as Efficient Electrocatalysts for Hydrogen Evolution in Basic Media

A challenging but urgent task is to construct efficient and robust hydrogen evolution reaction(HER) electrocatalysts for practically feasible and sustainable hydrogen production through alkaline water electrolysis. Herein we report a simple and mild pyrolysis method to synthesize the efficient Ru nanoparticles(NPs) supported on Co-embedded N-doped carbon nanotubes(Ru/Co-NCNTs) catalyst for HER in basic media. The Ru/Co-NCNTs display remarkable performance with a low overpotential of only 35 mV at 10 mA/cm², a small Tafel slope(36 mV/dec), and a high mass activity in 1 mol/L KOH, which is superior to commercial 20% Pt/C catalyst. This excellent performance is benefited from the enhanced conductivity of N-doped carbon nanotubes(NCNTs) and high intrinsic activity triggered by synergistic coupling between Ru NPs and Co-embedded N-doped carbon nanotubes(Co-NCNTs).     

Ru−FeNi Alloy Heterojunctions on Lignin-derived Carbon as Bifunctional Electrocatalysts for Efficient Overall Water Splitting

Rational design of efficient, stable, and inexpensive bifunctional electrocatalysts for oxygen evolution reactions (OER) and hydrogen evolution reactions (HER) is a key challenge to realize green hydrogen production via electrolytic water splitting. Herein, Ru nanoparticles and FeNi alloy heterojunction catalyst (Ru−FeNi@NLC) encapsulated via lignin-derived carbon was prepared by self-assembly precipitation and in situ pyrolysis. The designed catalyst displays excellent performance at 10 mA cm⁻² with low overpotentials of 36 mV for HER and 198 mV for OER, and only needs 1.48 V for overall water splitting. Results and DFT calculations show the unique N-doped lignin-derived carbon layer and Ru−FeNi heterojunction contribute to optimized electronic structure for enhancing electron transfer, balanced free energy of reactants and intermediates in the sorption/desorption process, and significantly reduced reaction energy barrier for the HER and OER rate-determining steps, thus improved reaction kinetics. This work provides a new in situ pyrolysis doping strategy based on renewable biomass for the construction of highly active, stable and cost-effective catalysts.     

Multifunctional Active‐Center‐Transferable Platinum/Lithium Cobalt Oxide Heterostructured Electrocatalysts towards Superior Water Splitting

Designing cost‐effective and efficient electrocatalysts plays a pivotal role in advancing the development of electrochemical water splitting for hydrogen generation. Herein, multifunctional active‐center‐transferable heterostructured electrocatalysts, platinum/lithium cobalt oxide (Pt/LiCoO₂) composites with Pt nanoparticles (Pt NPs) anchored on LiCoO₂ nanosheets, are designed towards highly efficient water splitting. In this electrocatalyst system, the active center can be alternatively switched between Pt species and LiCoO₂ for hydrogen evolution reaction (HER) and oxygen evolution reaction (OER), respectively. Specifically, Pt species are the active centers and LiCoO₂ acts as the co‐catalyst for HER, whereas the active center transfers to LiCoO₂ and Pt turns into the co‐catalyst for OER. The unique architecture of Pt/LiCoO₂ heterostructure provides abundant interfaces with favorable electronic structure and coordination environment towards optimal adsorption behavior of reaction intermediates. The 30 % Pt/LiCoO₂ heterostructured electrocatalyst delivers low overpotentials of 61 and 285 mV to achieve 10 mA cm^?2 for HER and OER in alkaline medium, respectively.     

负载无定型钌纳米簇的原子级钴掺杂一维碳纳米笼增强析氢催化性能

析氢反应是电解水产制氢的关键反应之一.在碱性条件下,由于催化剂表面与反应过程中产生的氧物种、氢物种与催化剂的吸附未处于最佳状态,析氢反应动力学往往比较缓慢,比在酸性条件下慢2-3个数量级.目前,铂基纳米催化剂被认为是最优的析氢催化剂,但因价格昂贵、稳定性较差,限制了其在电解水器件上的大规模应用.因此,设计一种价格较为低...     

Enhanced catalytic activity of Ru through N modification toward alkaline hydrogen electrocatalysis

Exploring highly efficient electrocatalysts and understanding the reaction mechanisms for hydrogen electrocatalysis,including hydrogen oxidation reaction （HOR） and hydrogen evolution reaction （HER） in alkaline media are conducive to the conversion of hydrogen energy.Herein,we reported a new strategy to boost the HER/HOR performances of ruthenium （Ru） nanoparticles through nitrogen （N） modification.The obtained N-Ru/C exhibit remarkable catalytic performance,with normalized HOR exchange current d...     

Engineering heterostructure and crystallinity of Ru/RuS2 nanoparticle composited with N-doped graphene as electrocatalysts for alkaline hydrogen evolution

Crystalline engineering and heterostructure have attracted much attention as effective strategies to improve the electrocatalytic activity for hydrogen evolution reaction (HER). In this study, a new heterostructure catalyst (Ru/RuS₂@N-rGO) with low crystallinity was fabricated by a simple and low-temperature method for HER in alkaline solution, applying the Na₂SO₄ as S source and polypyrrole as N source. Optimizing through the controllable crystalline engineering and composition ratio of Ru and RuS₂, the Ru/RuS₂@N-rGO heterocatalyst at the calcining 500 °C revealed highly efficient HER activity with overpotential 18 mV at a current density 10 mA/cm² and remarkable stability for 24 h in 1.0 mol/L KOH. This work provides a facile and effective method in designing advanced electrocatalysts for HER in the alkaline electrolytes by synergistically structural and component modulations.     

Optimizing the electronic structure of Fe-doped Co3O4 supported Ru catalyst via metal-support interaction boosting oxygen evolution reaction and hydrogen evolution reaction

Metal-support interaction(MSI) is an efficient way in heterogeneous catalysis and electrocatalysis to modulate the electronic structure of metal for enhanced catalytic activity. However, there are still great challenges in promoting the hydrogen evolution reaction(HER) and oxygen evolution reaction(OER) simultaneously by this way. Herein, Fe-doped Co₃O₄ supported Ru(Ru/FeCo) catalysts are synthesized by MSI strategies to further improve the electrocatalytic activity and sta...     

Multifunctional Active-Center-Transferable Platinum/Lithium Cobalt Oxide Heterostructured Electrocatalysts towards Superior Water Splitting

Designing cost-effective and efficient electrocatalysts plays a pivotal role in advancing the development of electrochemical water splitting for hydrogen generation. Herein, multifunctional active-center-transferable heterostructured electrocatalysts, platinum/lithium cobalt oxide (Pt/LiCoO₂) composites with Pt nanoparticles (Pt NPs) anchored on LiCoO₂ nanosheets, are designed towards highly efficient water splitting. In this electrocatalyst system, the active center can be alternatively switched between Pt species and LiCoO₂ for hydrogen evolution reaction (HER) and oxygen evolution reaction (OER), respectively. Specifically, Pt species are the active centers and LiCoO₂ acts as the co-catalyst for HER, whereas the active center transfers to LiCoO₂ and Pt turns into the co-catalyst for OER. The unique architecture of Pt/LiCoO₂ heterostructure provides abundant interfaces with favorable electronic structure and coordination environment towards optimal adsorption behavior of reaction intermediates. The 30 % Pt/LiCoO₂ heterostructured electrocatalyst delivers low overpotentials of 61 and 285 mV to achieve 10 mA cm⁻² for HER and OER in alkaline medium, respectively.     

Rationally Modulating the Functions of Ni3Sn2-NiSnOx Nanocomposite Electrocatalysts towards Enhanced Hydrogen Evolution Reaction

Identifying electrocatalysts with functions of easy dissociation of water, rapid transformation of hydroxyl and facile hydrogen-hydrogen bond formation are indispensable while challenge for realizing efficient alkaline hydrogen evolution reaction (HER). Herein, we presented the design of Ni₃Sn₂-NiSnO_x nanocomposites towards addressing this challenge. We showed that Ni₃Sn₂ possessed ideal hydrogen adsorption and low hydroxyl adsorption abilities and NiSnO_x facilitated water dissociation and hydroxyl transfer process, respectively. Consequently, the fine-tuned interplay of the two functional parts realized the mutual coordination among the multiple functions and led to significantly boosted HER kinetics. Current densities of 10 and 1000 mA cm⁻² were obtained at overpotentials of 14 and 165 mV on the optimized catalyst. This work highlights the significance of considering intrinsic interactions between active sites and all pertinent intermediates on obtaining promising electrocatalysts.     

A General Route to Prepare Low‐Ruthenium‐Content Bimetallic Electrocatalysts for pH‐Universal Hydrogen Evolution Reaction by Using Carbon Quantum Dots

A challenging but pressing task to design and synthesize novel, efficient, and robust pH‐universal hydrogen evolution reaction (HER) electrocatalysts for scalable and sustainable hydrogen production through electrochemical water splitting. Herein, we report a facile method to prepare an efficient and robust Ru‐M (M=Ni, Mn, Cu) bimetal nanoparticle and carbon quantum dot hybrid (RuM/CQDs) for pH‐universal HER. The RuNi/CQDs catalysts exhibit outstanding HER performance at all pH levels. The unexpected low overpotentials of 13, 58, and 18 mV shown by RuNi/CQDs allow a current density of 10 mA cm^?2 in 1 m KOH, 0.5 m H₂SO₄, and 1 m PBS, respectively, for Ru loading at 5.93 μgRu cm^?2. This performance is among the best catalytic activities reported for any platinum‐free electrocatalyst. Theoretical studies reveal that Ni doping results in a moderate weakening of the hydrogen bonding energy of nearby surface Ru atoms, which plays a critical role in improving the HER activity.     

Hierarchical Architectures Based on Ru Nanoparticles/Oxygen-Rich-Carbon Nanotubes for Efficient Hydrogen Evolution

Highly active and durable electrocatalysts are essential for producing hydrogen fuel through the hydrogen evolution reaction (HER). Here, a uniform deposition of Ru nanoparticles strongly interacting with oxygen-rich carbon nanotube architectures (Ru-OCNT) through ozonation and hydrothermal approaches has been designed. The hierarchical structure of Ru-OCNT is made by self-assembly of oxygen functionalities of OCNT. Ru nanoparticles interact strongly with OCNT at the Ru/OCNT interface to give excellent catalytic activity and stability of the Ru-OCNT, as further confirmed by density functional theory. Owing to the hierarchical structure and adjusted surface chemistry, Ru-OCNT has an overpotential of 34 mV at 10 mA cm⁻² with a Tafel slope of 27.8 mV dec⁻¹ in 1 M KOH, and an overpotential of 55 mV with Tafel slope of 33 mV dec⁻¹ in 0.5 M H₂SO₄. The smaller Tafel slope of Ru-OCNT than Ru-CNT and commercial Pt/C in both alkaline and acidic electrolytes indicates high catalytic activity and fast charge transfer kinetics. The as-proposed chemistry provides the rational design of hierarchically structured CNT/nanoparticle electrocatalysts for HER to produce hydrogen fuel.     

Engineering morphologies of cobalt oxide/phosphate-carbon nanohybrids for high-efficiency electrochemical water oxidation and reduction

Active non-noble metal catalysts plays a decisive role for water electrolysis,however,the rational design and development of cost-efficient electrocatalysts with Pt/IrO2-like activity is still a challenging task.Herein,a facile one-step electrodeposition route in deep eutectic solvents(DESs) is developed for morphology-controllable synthesis of cobalt oxide/phosphate-carbon nano hybrids on nickel foam(CoPO@C/NF).A series of CoPO@C/NF nanostructures including cubes,octahedrons,microspheres and nanoflowers are synthesized,which show promising electrocatalytic properties toward oxygen and hydrogen evolution reactions(OER/HER).Such surface self-organized microstructure with accessible active sites make a significant contribution to the enhanced electrochemical activity,and hybridizing cobalt oxide with cobalt pyrophosphates and carbon can result in enhanced OER performance through synergistic catalysis.Among all nanostructures,the obtained microspherical CoPO@C/NF-3 catalyst exhibits excellent catalytic activities for OER and HER in 1.0 M KOH,affording an anodic current density of 10 mA cm^-2 at overpotentials of 293 mV for OER and 93 mV for HER,with good long-time stability.This work offers a practical route for engineering the high-performance electrocatalysts towards efficient energy conversion and storage devices.     

A General Route to Prepare Low-Ruthenium-Content Bimetallic Electrocatalysts for pH-Universal Hydrogen Evolution Reaction by Using Carbon Quantum Dots

A challenging but pressing task to design and synthesize novel, efficient, and robust pH-universal hydrogen evolution reaction (HER) electrocatalysts for scalable and sustainable hydrogen production through electrochemical water splitting. Herein, we report a facile method to prepare an efficient and robust Ru-M (M=Ni, Mn, Cu) bimetal nanoparticle and carbon quantum dot hybrid (RuM/CQDs) for pH-universal HER. The RuNi/CQDs catalysts exhibit outstanding HER performance at all pH levels. The unexpected low overpotentials of 13, 58, and 18 mV shown by RuNi/CQDs allow a current density of 10 mA cm⁻² in 1 m KOH, 0.5 m H₂SO₄, and 1 m PBS, respectively, for Ru loading at 5.93 μgRu cm⁻². This performance is among the best catalytic activities reported for any platinum-free electrocatalyst. Theoretical studies reveal that Ni doping results in a moderate weakening of the hydrogen bonding energy of nearby surface Ru atoms, which plays a critical role in improving the HER activity.     

Hollow Nanotube Ru/Cu2+1O Supported on Copper Foam as a Bifunctional Catalyst for Overall Water Splitting

Hydrogen energy is considered as one of the ideal clean energies for solving the energy shortage and environmental issues, and developing highly efficient electrocatalysts for overall water splitting to produce hydrogen is still a huge challenge. Herein, for the first time, Ru-doped Cu₂₊₁O vertically arranged nanotube arrays in situ grown on Cu foam (Ru/Cu₂₊₁O NT/CuF) are reported and further investigated for their catalytic properties for overall water splitting. The Ru/Cu₂₊₁O NT/CuF presents ultrahigh catalytic activities for both the hydrogen evolution reaction (HER) and oxygen evolution reaction (OER) in alkaline conditions, and it exhibits a small overpotential of 32 mV at 10 mA cm⁻² in the HER, and only needs 210 mV overpotential to achieve a current density of 10 mA cm⁻² in the OER. Importantly, the alkaline electrolyzer using Ru/Cu₂₊₁O NT/CuF as a bifunctional electrocatalyst only needs 1.53 V voltage to deliver a current density of 10 mA cm⁻², which is much lower than the benchmark of IrO₂(+)/Pt(−) counterpart (1.64 V at 10 mA cm⁻²). The excellent performance of the Ru/Cu₂₊₁O NT/CuF catalyst is attributed to its high conductive substrate and special Ru-doped nanotube structure, which provides a high electrochemical active surface area and 3D gas diffusion channel.     

CoP/Co_2P/C纳米材料用于全pH值电催化析氢

在氮气下一步退火含有植酸和钴的前驱体,合成了一种新型的CoP/Co2P/C复合纳米材料作为电催化剂,该催化剂在全pH值范围下表现出优异的电催化析氢活性和稳定性.在0.5mol/L的硫酸中,电流密度为10mA/cm~2时,过电位为135mV.在1mol/L KOH溶液中,CoP/Co_2P/C催化剂需要141 mV的过电位才能使电流密度达到10 mA/cm~2,在0.1mol/L磷酸盐缓冲溶液中,需要155mV的过电位才能使电流密度达到10mA/cm~2.这种优异的析氢活性主要归因于CoP/Co_2P纳米粒子和C层之间的协同作用.     

Ultrathin WS2 Nanoflakes as a High‐Performance Electrocatalyst for the Hydrogen Evolution Reaction

Much has been done to search for highly efficient and inexpensive electrocatalysts for the hydrogen evolution reaction (HER), which is critical to a range of electrochemical and photoelectrochemical processes. A new, high‐temperature solution‐phase method for the synthesis of ultrathin WS₂ nanoflakes is now reported. The resulting product possesses monolayer thickness with dimensions in the nanometer range and abundant edges. These favorable structural features render the WS₂ nanoflakes highly active and durable catalysts for the HER in acids. The catalyst exhibits a small HER overpotential of approximately 100 mV and a Tafel slope of 48 mV/decade. These ultrathin WS₂ nanoflakes represent an attractive alternative to the precious platinum benchmark catalyst and rival MoS₂ materials that have recently been heavily scrutinized for the electrocatalytic HER.     

Cobalt Incorporated Graphitic Carbon Nitride as a Bifunctional Catalyst for Electrochemical Water-Splitting Reactions in Acidic Media

Non-noble metal-based bifunctional electrocatalysts may be a promising new resource for electrocatalytic water-splitting devices. In this work, transition metal (cobalt)-incorporated graphitic carbon nitride was synthesized and fabricated in electrodes for use as bifunctional catalysts. The optimum catalytic activity of this bifunctional material for the hydrogen evolution reaction (HER), which benefitted at a cobalt content of 10.6 wt%, was promoted by the highest surface area and conductivity. The activity achieved a minimum overpotential of ~85 mV at 10 mA/cm² and a Tafel slope of 44.2 mV/dec in an acidic electrolyte. These values of the HER were close to those of a benchmark catalyst (platinum on carbon paper electrode). Moreover, the kinetics evaluation at the optimum catalyst ensured the catalyst flows (Volmer–Heyrovsky mechanism), indicating that the adsorption step is rate-determining for the HER. The activity for the oxygen evolution reaction (OER) indicated an overpotential of ~530 mV at 10 mAcm⁻² and a Tafel slope of 193.3 mV/dec, which were slightly less or nearly the same as those of the benchmark catalyst. Stability tests using long-term potential cycles confirmed the high durability of the catalyst for both HER and OER. Moreover, the optimal bifunctional catalyst achieved a current density of 10 mAcm⁻² at a cell voltage of 1.84 V, which was slightly less than that of the benchmark catalyst (1.98 V). Thus, this research reveals that the present bifunctional, non-noble metallic electrocatalyst is adequate for use as a water-splitting technology in acidic media.     

Hierarchical Tubular Architecture Constructed by Vertically Aligned CoS2-MoS2 Nanosheets for Hydrogen Evolution Electrocatalysis

Developing efficient electrocatalysts for the hydrogen evolution reaction (HER) is crucial for establishing a sustainable and environmentally friendly energy system, but it is still a challenging issue. Herein, hierarchical tubular-structured CoS₂-MoS₂/C as efficient electrocatalysts are fabricated through a unique metal–organic framework (MOF) mediated self-sacrificial templating. Core–shell structured MoO₃@ZIF-67 nanorods are used both as a precursor and a sacrificial template to form the one-dimensional tubular heterostructure where vertically aligned two-dimensional CoS₂-MoS₂ nanosheets are formed on the MOF-derived carbon tube. Trace amounts of noble metals (Pd, Rh, and Ru) are successfully introduced to enhance the electrocatalytic property of the CoS₂-MoS₂/C nanocomposites. The as-synthesized hierarchical tubular heterostructures exhibit excellent HER catalytic performance owing to the merits of the hierarchical hollow architecture with abundantly exposed edges and the uniformly dispersed active sites. Impressively, the optimal Pd-CoS₂-MoS₂/C-600 catalyst delivers a current density of 10 mA cm⁻² at a low overpotential of 144 mV and a small Tafel slope of 59.9 mV/dec in 0.5 m H₂SO₄. Overall, this MOF-mediated strategy can be extended to the rational design and synthesis of other hollow heterogeneous catalysts for scalable hydrogen generation.     

Enhanced Electron Penetration through an Ultrathin Graphene Layer for Highly Efficient Catalysis of the Hydrogen Evolution Reaction

Major challenges encountered when trying to replace precious‐metal‐based electrocatalysts of the hydrogen evolution reaction (HER) in acidic media are related to the low efficiency and stability of non‐precious‐metal compounds. Therefore, new concepts and strategies have to be devised to develop electrocatalysts that are based on earth‐abundant materials. Herein, we report a hierarchical architecture that consists of ultrathin graphene shells (only 1–3 layers) that encapsulate a uniform CoNi nanoalloy to enhance its HER performance in acidic media. The optimized catalyst exhibits high stability and activity with an onset overpotential of almost zero versus the reversible hydrogen electrode (RHE) and an overpotential of only 142 mV at 10 mA cm^?2, which is quite close to that of commercial 40 % Pt/C catalysts. Density functional theory (DFT) calculations indicate that the ultrathin graphene shells strongly promote electron penetration from the CoNi nanoalloy to the graphene surface. With nitrogen dopants, they synergistically increase the electron density on the graphene surface, which results in superior HER activity on the graphene shells.