金属有机骨架材料MIL-53(Al)负载钴催化剂的CO催化氧化反应性能

采用溶剂法合成了热稳定性高的金属有机骨架材料MIL-53(Al)(MIL:Materials of Institut Lavoisier),用此材料为载体负载钴催化剂用于CO的催化氧化反应,并与Al2O3负载的钴催化剂进行了对比.采用热重-差热扫描量热(TG-DSC)、傅里叶变换红外(FTIR)光谱、X射线衍射(XRD)、N2物理吸附-脱附、透射电子显微镜(TEM)、氢气程序升温还原(H2-TPR)等方法对催化剂的结构性质进行了表征.TG和N2物理吸附-脱附结果表明,载体MIL-53(Al)有好的稳定性和高的比表面积;XRD以及TEM结果表明Co/MIL-53(Al)上负载的Co3O4颗粒粒径(平均约为5.03 nm)明显小于Al2O3上Co3O4颗粒粒径(平均约为7.83 nm).MIL-53(Al)的三维多孔结构中分布均匀的位点能很好地分散固定Co3O4颗粒,高度分散的Co3O4颗粒有利于CO的催化氧化反应.H2-TPR实验发现Co/MIL(Al)催化剂的还原温度低于Co/Al2O3催化剂的还原温度,低的还原温度表现为高的催化氧化活性.CO催化氧化结果表明,MIL-53(Al)负载钴催化剂的催化活性明显高于Al2O3负载钴催化剂,MIL-53(Al)负载钴催化剂在160°C时使CO氧化的转化率达到98%,到180°C时CO则完全转化,催化剂的结构在催化反应过程中保持稳定.     

自发氧化还原法制备Co3O4/CeO2纳米复合材料及其CO催化氧化反应结构优化

采用简单的自发氧化还原法合成了Co3O4/CeO2纳米复合材料,采用透射电子显微镜(TEM)\,X射线衍射(XRD)及X射线光电子能谱(XPS)等分析手段对样品进行了表征,并探究了反应参数对其催化CO氧化反应活性的影响.结果表明,Co/Ce摩尔比、pH值、反应温度和煅烧温度均显著影响Co3O4/CeO2纳米复合材料的催化性能;性能最优的样品用于催化CO氧化反应在140℃时即可实现100%的转化率,并且在循环测试中其催化活性保持不变,显示出良好的稳定性.     

Identification of the Active Sites for Low Temperature CO Oxidation over Nanocrystalline Co3O4 Catalysts

The microstructural properties of dry‐grinding derived Co₃O₄ catalysts pretreated under different atmospheres, in relation to the activities on CO oxidation were investigated. The Co₃O₄ synthesized by soft reactive grinding and pretreated with O₂ resulted in the best activity, with 100% conversion of CO at ?52 °C, superior to that of Co₃O₄ pretreated with He. To find out the active sites on Co₃O₄ for low temperature CO oxidation, the characterizations of the cobalt oxides had been investigated by means of N₂ physisorption, XRD, TEM, H₂‐TPR, CO‐titration, XPS and O₂‐TPD technologies. XPS of Co2p results show that it is difficult to ascribe the difference in catalytic performance to the surface concentration of active Co³⁺ sites. A correlation between the activity and the CO‐titration and O₂‐TPD results for Co₃O₄ reveals that a high abundance of readily accessible superficial electrophilic oxygen (O^?) species is important for achieving a high activity. Therefore, CO oxidation takes place on the surface active oxygen sites in Co₃O₄ crystallites via the suprafacial mechanism.     

Metal-Organic Framework Derived Hierarchical Co/C@V2O3 Hollow Spheres as a Thin,Lightweight, and High-Efficiency Electromagnetic Wave Absorber

Developing high-efficiency electromagnetic (EM) wave absorbing materials with light weight, thin thickness, and wide absorption bandwidth is highly desirable for ever-developing electronic and telecommunication devices. Herein, hierarchical metal–organic framework (MOF)-derived Co/C@V₂O₃ hollow spheres were designed and synthesized through a facile hydrothermal, precipitation, and pyrolysis method. The composite exhibits both excellent impedance matching and light weight due to the rational combination of hollow V₂O₃ spheres and porous Co/C. Additionally, multiple components enable a large dielectric and magnetic loss of the composite, giving rise to enhanced EM wave absorption performance with a maximum reflection loss (RL) of −40.1 dB and a broad effective absorption bandwidth (RL < −10 dB) of 4.64 GHz at a small thickness of 1.5 mm. This work provides insights into the design of hierarchical hollow and porous composites as thin and lightweight EM wave absorbers with efficient absorption, which can also be extended to energy storage, catalysis, and sensing.     

A Luminescent Metal-Organic Framework with LON Topology for Highly Effective Fluorescence Sensing of Fe3+ and TNP

Aluminescent Ag-based metal-organic framework(1) has been synthesized and its structure has been characterized. Compound 1 was fabricated using the Ag⁺ and bbimb^2‒ ligands and manifestes a rare LON topology. Compound 1 is selective not only in detecting traces of Fe³⁺ and 2,4,6-trinitrophenol(TNP) via luminescence quenching, but also demonstrates high selectivity in the presence of other competitors. Compound 1’s K_sv values towards Fe³⁺ can reach as high as 9.3×10³ L/mol, which is higher than those of several other MOF materials. It is also a recyclable luminous sensor with the potential to be utilized for detecting TNP. Hence, based on its characteristics, compound 1 can be regarded as a prospective luminescence sensor for detecting Fe³⁺ and TNP.     

介孔Co_3O_4-CeO_2复合氧化物的制备及在CO选择性氧化中的应用

以硝酸钴和硝酸铈为前驱物,SBA-15为硬模板,利用双溶剂法制备了Co3O4-CeO2介孔复合氧化物,通过X-射线衍射、N2吸脱附测试、程序升温还原和透射电子显微镜等技术对活性组分及载体进行了表征,并且与浸渍法和共沉淀法所制备的催化剂进行了对比分析.结果表明,相比于浸渍法和共沉淀法,采用双溶剂法制备的介孔Co3O4-C...     

Effect of Calcination Temperature on Surface Oxygen Vacancies and Catalytic Performance Towards CO Oxidation of Co3O4 Nanoparticles Supported on SiO2

Co₃O₄/SiO₂ catalysts for CO oxidation were prepared by conventional incipient wetness impregnation followed by calcination at various temperatures. Their structures were char-acterized with X-ray diffraction (XRD), laser Raman spectroscopy, X-ray photoelectron spectroscopy (XPS), temperature-programmed reduction (TPR) and X-ray absorption fine structure (XAFS) spectroscopy. Both XRD and Raman spectroscopy only detect the ex-istence of Co₃O₄ crystallites in all catalysts. However, XPS results indicate that excess Co²⁺ ions are present on the surface of Co₃O₄ in Co₃O₄(200)/SiO₂ as compared with bulk Co₃O₄. Meanwhile, TPR results suggest the presence of surface oxygen vacancies on Co₃O₄ in Co₃O₄(200)/SiO₂, and XAFS results demonstrate that Co₃O₄ in Co₃O₄(200)/SiO₂ con-tains excess Co²⁺. Increasing calcination temperature results in oxidation of excess Co²⁺ and the decrease of the concentration of surface oxygen vacancies, consequently the for-mation of stoichiometric Co₃O₄ on supported catalysts. Among all Co₃O₄/SiO₂ catalysts,Co₃O₄(200)/SiO₂ exhibits the best catalytic performance towards CO oxidation, demon-strating that excess Co²⁺ and surface oxygen vacancies can enhance the catalytic activity of Co₃O₄ towards CO oxidation. These results nicely demonstrate the effect of calcination temperature on the structure and catalytic performance towards CO oxidation of silica-supported Co₃O₄ catalysts and highlight the important role of surface oxygen vacancies on Co₃O₄.     

Cu改性ZIF-67衍生的Co3O4/C催化剂的CO-SCR脱硝特性

采用CO气体对NO进行选择性催化还原(CO-SCR)是一种有前景的脱硝技术.目前已报道的CO-SCR催化剂的脱硝特性主要是在无氧条件下开展的研究,考虑到实际应用情况,探究一种在有氧环境中具有较高脱硝效率的催化剂是很有必要的.作为一种新型功能性材料的金属有机骨架是脱硝催化剂的优良载体,其中ZIFs系列具有优良的性能.引入Cu对ZIF-67衍生的Co₃O₄/C进行改性,通过浸渍法在载体上负载铜后,热解氧化获得一系列CuO_x/Co₃O₄/C催化剂.利用ICP、 SEM、 XRD、 TEM、 TGA、 XPS、 BET和H₂-TPR等技术对催化剂的物理化学性质进行表征,结果表明,由于Cu的引入增加了表面的氧空位,改善了氧化还原能力,进而提高了催化剂脱硝活性.在制备的一系列催化剂中, 8.0 CuO_x/Co₃O₄/C在300℃时即可达到约95%NO转化率,并且其N₂选择性也达到9...     

A Doping Technique that Suppresses Undesirable H2 Evolution Derived from Overall Water Splitting in the Highly Selective Photocatalytic Conversion of CO2 in and by Water

Photocatalytic conversion of CO₂ to reduction products, such as CO, HCOOH, HCHO, CH₃OH, and CH₄, is one of the most attractive propositions for producing green energy by artificial photosynthesis. Herein, we found that Ga₂O₃ photocatalysts exhibit high conversion of CO₂. Doping of Zn species into Ga₂O₃ suppresses the H₂ evolution derived from overall water splitting and, consequently, Zn‐doped, Ag‐modified Ga₂O₃ exhibits higher selectivity toward CO evolution than bare, Ag‐modified Ga₂O₃. We observed stoichiometric amounts of evolved O₂ together with CO. Mass spectrometry clarified that the carbon source of the evolved CO is not the residual carbon species on the photocatalyst surface, but the CO₂ introduced in the gas phase. Doping of the photocatalyst with Zn is expected to ease the adsorption of CO₂ on the catalyst surface.     

Low-temperature and stable CO oxidation of Co3O4/TiO2 monolithic catalysts

Highly efficient Co₃O₄/TiO₂ monolithic catalysts with enhanced stability were in-situ grown on Ti mesh for CO oxidation,which could completely oxidize CO at 120℃.The comprehensive catalytic performance is competitive to some noble metal catalysts and conventional Co₃O₄ powder catalysts,which holds great potential toward industrial applications.Meanwhile,the in-situ synthesis strategy of Co₃O₄/TiO₂ monolithic catalysts on flexible mesh substrate in this work can be extended to the development of a variety of oxide-based monolithic catalysts towards diverse catalysis applications.     

微波加热分解法制备CuO-Ce0.6Zr0.4O2及其催化CO氧化性能

采用微波加热分解法制备了一系列CuO含量(0-25%, w)不同的CuO-Ce_0.6Zr_0.4O₂催化剂, 并用X射线衍射(XRD)、透射电镜(TEM)、N₂吸附-脱附(BET)和H₂程序升温还原(H₂-TPR)技术对催化剂进行了表征, 利用色谱流动法考察了其催化CO低温氧化性能. 结果表明: 当CuO含量为15%时, 所制备催化剂的催化活性最佳. 在催化剂中存在三种不同类型的铜物种, 即高分散、小颗粒和大颗粒的CuO. 催化剂表面高分散和小颗粒的CuO有利于催化活性的提高, 而大颗粒的CuO对催化活性具有抑制作用.     

Synthesis of Fe3O4@SiO2@DOPisatin‐Ni(II) and Cu(II) nanoparticles: Highly efficient catalyst for the synthesis of sulfoxides and disulfides

The catalytic activity of two magnetic catalysts Fe₃O₄@SiO₂@DOPisatin‐M(II) (M = Ni, Cu) was investigated in the environmentally green H₂O₂ oxidant‐based oxidation of sulfides to sulfoxides and oxidative coupling of thiols to disulfides. By using these catalysts, various substrates were successfully converted into their corresponding product. These catalysts could also be reused multiple time without significant loss of activity. The physical and chemical properties of the catalysts were determined using scanning electron microscopy (SEM), Fourier transform infrared spectroscopy (FT‐IR), X‐ray diffraction (XRD), thermogravimetric analysis (TGA), vibrating sample magnetometer (VSM), energy dispersive X‐ray spectroscopy (EDX) and atomic absorption spectroscopy (AAS).     

Fe3O4/ZnS Hollow Nanospheres:A Highly Efficient Magnetic Heterogeneous Catalyst for Synthesis of 5-Substituted 1H-Tetrazoles from Nitriles and Sodium Azide

An efficient route for the synthesis of 5‐substituted 1H‐tetrazole via [2+3] cycloaddition of nitriles and sodium azide is reported using Fe₃O₄/ZnS hollow nanospheres as a magnetic separable heterogeneous catalyst. The catalyst is very efficient, affording excellent yields and can be reused for several circles. In addition, the Fe₃O₄ inner shell exhibits magnetism, making the catalyst easily separated by a magnet.