Rapid and Large‐Scale Production of Multi‐Fluorescence Carbon Dots by a Magnetic Hyperthermia Method

The intrinsic low yield of carbon dots (CDs) is a barrier that limits practical application. Now, a magnetic hyperthermia (MHT) method is used to synthesize fluorescent CDs on a large scale (up to 85 g) in one hour (yield ca. 60 %). The reaction process is intensified by MHT since the efficient heating system enhances the energy transfer. CDs with blue, green, and yellow luminescence are synthesized by using carbamide and citrate with three different cations (Zn²⁺, Na⁺, K⁺), respectively. The CDs exhibit bright fluorescence under UV light and show excellent monodispersity and solubility in water. The alternation of photoluminescence (PL) emissions of these CDs is probably due to the difference in particle sizes and surface state. A bar coating technique is used to construct large‐area emissive polymer/CDs films. CDs can insert themselves into the polymer chains by hydrogen bonding and electrostatic interactions. Wound healing efficiency can be enhanced by the Zn‐CDs/PCL nanofibrous scaffold.     

Photoactivated Fluorescence Enhancement in F,N-Doped Carbon Dots with Piezochromic Behavior

Photoactivation in CdSe/ZnS quantum dots (QDs) on UV/Vis light exposure improves photoluminescence (PL) and photostability. However, it was not observed in fluorescent carbon quantum dots (CDs). Now, photoactivated fluorescence enhancement in fluorine and nitrogen co-doped carbon dots (F,N-doped CDs) is presented. At 1.0 atm, the fluorescence intensity of F,N-doped CDs increases with UV light irradiation (5 s–30 min), accompanied with a blue-shift of the fluorescence emission from 586 nm to 550 nm. F,N-doped CDs exhibit photoactivated fluorescence enhancement when exposed to UV under high pressure (0.1 GPa). F,N-doped CDs show reversible piezochromic behavior while applying increasing pressure (1.0 atm to 9.98 GPa), showing a pressure-triggered aggregation-induced emission in the range 1.0 atm–0.65 GPa. The photoactivated CDs with piezochromic fluorescence enhancement broadens the versatility of CDs from ambient to high-pressure conditions and enhances their anti-photobleaching.     

Photoactivated Fluorescence Enhancement in F,N‐Doped Carbon Dots with Piezochromic Behavior

Photoactivation in CdSe/ZnS quantum dots (QDs) on UV/Vis light exposure improves photoluminescence (PL) and photostability. However, it was not observed in fluorescent carbon quantum dots (CDs). Now, photoactivated fluorescence enhancement in fluorine and nitrogen co‐doped carbon dots (F,N‐doped CDs) is presented. At 1.0 atm, the fluorescence intensity of F,N‐doped CDs increases with UV light irradiation (5 s–30 min), accompanied with a blue‐shift of the fluorescence emission from 586 nm to 550 nm. F,N‐doped CDs exhibit photoactivated fluorescence enhancement when exposed to UV under high pressure (0.1 GPa). F,N‐doped CDs show reversible piezochromic behavior while applying increasing pressure (1.0 atm to 9.98 GPa), showing a pressure‐triggered aggregation‐induced emission in the range 1.0 atm–0.65 GPa. The photoactivated CDs with piezochromic fluorescence enhancement broadens the versatility of CDs from ambient to high‐pressure conditions and enhances their anti‐photobleaching.     

Dramatic Fluorescence Enhancement of Bare Carbon Dots through Facile Reduction Chemistry

Reduction of bare carbon dots (CDs) in aqueous NaBH₄ solution is a facile and effective approach to enhance their fluorescence without any surface coverage. CDs are treated with dilute aqueous NaBH₄ solutions, enhancing their quantum yields (QYs) successfully from 1.6 % to 16 % which is comparable to semiconductive QDs in aqueous environments. If pristine CDs are treated hydrothermally prior to reduction by NaBH₄, QYs reach 40.5 %. This value is among the highest QYs reported for bare CDs in the literature. The approach to enhance fluorescence through chemical reduction is generally applicable to other kinds of CDs synthesized by various methods. Alteration of the chemical structure of the CDs by NaBH₄‐reduction is analyzed by ¹³C NMR, X‐ray photoelectron spectroscopy (XPS) and Raman spectroscopy, which demonstrate that the carbonyl group content is decreased after NaBH₄‐reduction, whereas the number of sp³‐type carbon defects is increased. The valence‐band maxima (VBM) near the surface related to the surface energy bands of the CDs are estimated by XPS. VBM data show a semiconducting layer on the surface of the CDs, and the VBM of the CDs decrease with increasing NaBH₄‐reduction time. The layered graphite structures in the cores of the CDs are clearly observed by transmission electron microscopy (TEM). CDs could perhaps be regarded as semiconductive surface defect layers formed by chemical erosion over conductive graphite cores. Chemical reduction by NaBH₄ changes the surface‐energy bands of the CDs, thus, enhances their fluorescence. The fluorescence properties of aqueous NaBH₄‐reduced CDs are also studied for possible biological applications.     

Insight into the Excitation-Dependent Fluorescence of Carbon Dots

High quantum yield, photoluminescence tunability, and sensitivity to the environment are a few distinct trademarks that make carbon nanodots (CDs) interesting for fundamental research, with potential to replace the prevalent inorganic semiconductor quantum dots. Currently, application and fundamental understanding of CDs are constrained because it is difficult to make a quantitative comparison among different types of CDs simply because their photoluminescence properties are directly linked to their size distribution, the surface functionalization, the carbon core structures (graphitic or amorphous) and the number of defects. Herein, we report a facile one-step synthesis of mono-dispersed and highly fluorescent nanometre size CDs from a ‘family’ of glucose-based sugars. These CDs are stable in aqueous solutions with photoluminescence in the visible range. Our results show several common features in the family of CDs synthesized in that the fluorescence, in the visible region, is due to a weak absorption in the 300–400 nm from a heterogeneous population of fluorophores. Fluorescence quenching experiments suggest the existence of not only surface-exposed fluorophores but more importantly solvent inaccessible fluorophores present within the core of CDs. Interestingly, time-resolved fluorescence anisotropy experiments directly suggest that a fast exchange of excitation energy occurs that results in a homo-FRET based depolarization within 150 ps of excitation.     

The Use of a Microreactor for Rapid Screening of the Reaction Conditions and Investigation of the Photoluminescence Mechanism of Carbon Dots

A microreactor is applied and reported, for the first time, in the field of research of carbon dots (CDs), including rapid screening of the reaction conditions and investigation of the photoluminescence (PL) mechanism. Various carbonaceous precursors and solvents were selected and hundreds of reaction conditions were screened (ca. 15 min on average per condition). Through analyzing the screened conditions, tunable PL emission maxima, from about 330 to 550 nm with respectable PL quantum yields, were achieved. Moreover, the relationship between different developmental stages of the CDs and the PL properties was explored by using the microreactor. The PL emission was observed to be independent of the composition, carbonization extent, and morphology/size of the CDs. This study unambiguously presents that a microreactor could serve as a promising tool for the research of CDs.     

由蚕砂制备的碳量子点在不同激发、pH、金属离子、温度及极性环境下的荧光性质研究

碳量子点作为一种新兴的荧光纳米材料,具有粒径分布均匀、光稳定性好、激发-发射波长可调控、表面可修饰等优良的性质,兼具低毒性、生物相容性好等优点,在分析检测和生物成像等领域展现出广阔的应用前景。而蚕砂是家蚕的干燥粪便,简单易得。利用蚕砂作为碳量子点制备原料,采用微波合成的方法制备得到了一种平均水合粒径为4.86 nm,含氮、硫修饰的碳量子点材料,可作为针对激发波长、pH、金属离子浓度、温度及溶剂极性的变化有着显著响应特性的碳量子点型荧光探针。该探针的荧光最大发射波长随激发波长或pH的增加而红移;荧光强度随温度或pH的降低而增加;随着金属离子,特别是铜离子的加入而逐渐降低,并随着EDTA络离子的加入而逐渐回复。在多种溶剂中该探针均具有较好的溶解度,当换用不同极性的溶剂时,随着溶剂极性的增加荧光发射波长逐渐红移。荧光性质随多重环境参数变化为该碳量子点在未来的生物检测和成像领域提供了广阔的应用前景。     

Photoluminescence Mechanism of Carbon Dots: Triggering Multiple Color Emissions through Controlling the Degree of Protonation

Carbon dots (CDs) have excellent optical properties, low toxicity and easy preparation, which have led to them being widely used in biomedicine, sensing and optical devices. However, although great progress has been made in the preparation of CDs, the detailed exploration of their photoluminescence (PL) mechanism is still under debate due to their complex structures and surface functionalities. Here, we proposed a single change in the pH of the synthesis condition, which had no effect on the CDs intrinsic core states and avoided the mutual influence of multiple PL origins. The m-phenylenediamine (m–PD) served as a carbon source, whose protonation degree determined the surface state of the resulting CDs and the accompanying fluorescence characteristics. The as-obtained CDs materials can be applied in the chemical sensor and anti-counterfeiting fields in a targeted manner. Therefore, our work not only contributes to the explanation of the CDs PL mechanism, but also obtains a series of CDs materials with controllable PL properties.     

碳量子点荧光猝灭法检测药物中的异鼠李素

以L-天冬氨酸为碳源,尿素为氮源,采用微波加热法制备荧光碳量子点(CDs),得到的CDs具有球形结构和单一分散性,平均粒径约为5 nm。红外光谱、X射线光电子能谱、紫外和荧光光谱的表征结果表明,合成的CDs具有较高的荧光稳定性,良好的水溶性和对异鼠李素(ISOR)高的选择性。在优化条件下,ISOR浓度在0.22～180 nmol/L范围内时与CDs荧光猝灭程度(I_F0/I_F)呈良好的线性关系,检出限(LOD)为1.32 nmol/L,回收率为90.8%～107%。结果表明,该CDs可用于ISOR的快速、高效、灵敏检测。     

Rapid and Large-Scale Production of Multi-Fluorescence Carbon Dots by a Magnetic Hyperthermia Method

The intrinsic low yield of carbon dots (CDs) is a barrier that limits practical application. Now, a magnetic hyperthermia (MHT) method is used to synthesize fluorescent CDs on a large scale (up to 85 g) in one hour (yield ca. 60 %). The reaction process is intensified by MHT since the efficient heating system enhances the energy transfer. CDs with blue, green, and yellow luminescence are synthesized by using carbamide and citrate with three different cations (Zn²⁺, Na⁺, K⁺), respectively. The CDs exhibit bright fluorescence under UV light and show excellent monodispersity and solubility in water. The alternation of photoluminescence (PL) emissions of these CDs is probably due to the difference in particle sizes and surface state. A bar coating technique is used to construct large-area emissive polymer/CDs films. CDs can insert themselves into the polymer chains by hydrogen bonding and electrostatic interactions. Wound healing efficiency can be enhanced by the Zn-CDs/PCL nanofibrous scaffold.     

Large scale synthesis of red emissive carbon dots powder by solid state reaction for fingerprint identification

Red emissive carbon dots(CDs) powder was synthesized on a large scale from phloroglucinol and boric acid by a novel solid state reaction with yield up to 75%. This method is safe and convenient, for it needs neither high pressure reactors nor complicated post-treatment procedures. The as-prepared carbon dots powder exhibited strong red fluorescence with excitation-independent behavior. XPS measurement and PL spectra suggest that such red fluorescence arise from boron-doped structures in CDs, which increases along with the boron concentration on CDs surface but decreases when the concentration quenching effect takes place. To overcome the aggregation induced fluorescence quenching of the solid CDs powder,the conventional methods are dispersing CDs into a large amount of inert substrates. But our present work provides a new strategy to realize strong red fluorescence of CDs in solid state. As a result, such carbon dots powder works well for latent fingerprint identification on various material surfaces.     

Luminescent Carbon Dots from Wet Olive Pomace: Structural Insights,Photophysical Properties and Cytotoxicity

Carbon nanomaterials endowed with significant luminescence have been synthesized for the first time from an abundant, highly localized waste, the wet pomace (WP), a semi-solid by-product of industrial olive oil production. Synthetic efforts were undertaken to outshine the photoluminescence (PL) of carbon nanoparticles through a systematic search of the best reaction conditions to convert the waste biomass, mainly consisting in holocellulose, lignin and proteins, into carbon dots (CDs) by hydrothermal carbonization processes. Blue-emitting CDs with high fluorescence quantum yields were obtained. Using a comprehensive set of spectroscopic tools (FTIR, Raman, XPS, and ¹H/¹³C NMR) in combination with steady-state and time-resolved fluorescence spectroscopy, a rational depiction of WP-CDs structures and their PL properties was reached. WP-CDs show the up-conversion of PL capabilities and negligible cytotoxicity against two mammalian cell lines (L929 and HeLa). Both properties are excellent indicators for their prospective application in biological imaging, biosensing, and dynamic therapies driven by light.     

Highly sensitive fluorometric method based on nitrogen-doped carbon dot clusters for tartrazine determination in cookies samples

Nitrogen-doped carbon nanodots (CDs) were prepared via the solvothermal method, using urea and triethylene glycol as the starting materials. The as-prepared CDs had individual diameters of approximately 100 nm and were in clusters of different sizes. The surface composition and optical properties of the as-prepared CDs were characterized. They exhibited multicolor emission properties in the visible range when excited with a wide wavelength range. The aqueous solution of the CDs was used in highly sensitive tartrazine determination. The fluorescence quenching of the CDs was in a linear relationship with the concentrations of tartrazine in the range of 0.5–30.0 μM. The detection limit of the assay was 0.18 μM. Acceptable recovery results were obtained via spike-recovery experiments on cookie samples.     

Review: fluorescent cyclodextrins for molecule sensing

Cyclodextrins (CDs), which are spectroscopically inert, were converted into fluorescent CDs by modification with one or two fluorophores. Many fluorescent CDs changed the fluorescent intensities upon addition of guest compounds, causing the locational change of the fluorophore mostly from inside to outside of the CD cavities. On this basis, the fluorescent CDs were used as fluorescent chemosensors for molecule recognition. Modified CDs bearing two naphthalene or pyrene moieties exhibit intramolecular excimer emission and their guest-responsive excimer intensity variations were used for molecule sensing. Fluorescent CDs bearing a dansyl moiety decreased the fluorescence intensity upon guest addition, reflecting the environmental change around the fluorophore from the hydrophobic interior of the CD cavities to bulk water solution. Modified CDs bearing a p-N,N-dimethylaminobenzoyl (DMAB) moiety exhibit dual emissions from nonpolar planar (NP) and twisted intramolecular charge transfer (TICT) excited states, and the TICT emission intensity was useful for sensing molecules. A biotin-bound DMAB system was also constructed, and the presence of the protein (avidin) was found to enhance the NP fluorescence. This avidin-bound DMAB system showed higher sensitivities and stronger binding ability for guest species than the system without avidin.     

The polymeric characteristics and photoluminescence mechanism in polymer carbon dots: A review

A large amount of emerging research on carbon dots (CDs) has been gradually improving the understanding of their structures, properties and emission mechanism. Distinct from the dominating status of quantum confinement effect in quantum dots, CDs always suffer from the complicated optical properties, deriving from the large differences in raw materials and synthesis methods. The diverse concepts and species puzzle researchers and hinder the further study. Thus, there is an urgent need to unify the definition and clarify the confused relation of CDs. Herein, we classify the raw materials of CDs synthesis into small molecules and polymers, and discuss CDs from the aspects of raw materials. We believe that the polymer-like structures reserved in CDs are universal no matter from the condensation of small molecules or the direct inheritance of polymers. Moreover, many similarities are concluded between CDs and polymers through serious comparisons and enough evidences. The formation processes of CDs are mostly polymerization and the obtained CDs always possess polymeric characteristics, such as abundant reactive functional groups, polydispersity of products, highly crosslinked network structure and other similar properties to non-conjugated fluorescent polymers. Therefore, the new concept, polymer carbon dots (PCDs), is put forward to generalize all kinds of CDs based on the summary of related reports. Besides, the complicated influence factors of photoluminescence (PL) are discussed and mainly classified as molecule state, carbon core state, surface state and crosslink enhanced emission (CEE) effect. In general, this review puts forward PCDs as a unified definition of reported CDs, and summarizes the polymeric characteristics of PCDs from formation process and product properties, as well as simultaneously illustrates the PL mechanism.     

Fluorescence Intensity Enhancement of Green Carbon Dots: Synthesis,Characterization and Cell Imaging

The hydrothermal treatment of green carbon dots (CDs) is an appropriate fluorescent probe synthesis method. CDs are exploited as biological staining agents, especially for cellular detection and imaging. The nitrogen-doped green carbon dots (N-CDs) formation can improve the fluorescence intensity property in a one-step process. Here, we report two N-CDs from lemon and tomato extraction in the presence of hydroxylamine. Lemon and tomato N-CDs showed the blue fluorescence under ultraviolet radiation of about 360 nm. The characterization of CDs and N-CDs showed the presence of N-H and C–N bonds which enhanced the fluorescence efficiency. The mean size of lemon and tomato N-CDs were about 2 and 3 nm with an increased quantum yield (QY) of 5% and 3.38%, respectively. The CDs and N-CDs cytotoxicity assay exhibited high cell viability approximately 85% and 73%, respectively. N-CDs show superior fluorescent intensity in different solvents and significant stability under long-time UV irradiation, different PH and high ionic strength. Our results indicated that the use of N-CDs in cell imaging can lead to fluorescence intensity enhancement as well as proper biocompatibility. Therefore, the safe and high fluorescence intensity of green N-CDs can be utilized for fluorescent probes in biolabeling and bioimaging applications.     

纳米碳点的制备与应用研究进展

纳米碳点是碳纳米材料家族的新成员,近年来在国内外受到广泛关注。与传统的荧光染料和半导体量子点发光材料相比,碳点不仅具有优异的光学性能及尺寸效应,且具有制备成本低廉、生物相容性好、易于官能化、能带结构可调等优势。本文在理清有关碳点概念的基础之上,介绍了碳点结构特征和制备策略,着重综述了纳米碳点在生物成像与诊疗、传感器件、催化、光电器件和能量存储领域的最新研究进展,探讨了碳点研究目前存在的问题及未来的发展方向。     

Solvation and dynamic behavior of cyclodextrins in dimethyl sulfoxide solution

High-frequency dielectric relaxation behavior up to 20 GHz was investigated for plain (alpha, beta, gamma) and (62 and 100%) methylated cyclodextrins, CDs, in dimethyl sulfoxide, DMSO, solution. Each hydrogen atom of OH groups of the CDs solvated a DMSO molecule for a residence time of 130-180 ps due to the hydrogen bond formation to an oxygen atom of DMSO, and a few DMSO molecules were included in cavities of the CDs for a while similar to the residence time. The overall rotational relaxation modes of solvated CDs were also observed depending on the effective sizes of the solvated CDs.     

Use of β‐cyclodextrins to control the structure of water‐soluble copolymers with hydrophobic parts

In this article, we present the synthesis and characterization of water‐soluble polymers with hydrophobic moieties. The polymers were synthesized in aqueous solutions utilizing β‐cyclodextrins as solubility enhancers to bring the hydrophobic monomers into solution. Polymers were made with different spacing between polymer backbone and phenyl moiety by using styrene, allylbenzene, and 4‐phenyl‐1‐butene as hydrophobic moieties, respectively. The effect of the presence of CDs during synthesis as well as this difference in spacing was investigated by rebinding free β‐CDs to the polymers. The interactions between polymers and CDs were studied by ITC and this revealed some differences between the polymers. Polymers made in the presence of CDs showed a markedly stronger binding to free CDs. The same was observed with polymers with a longer spacing between backbone and phenyl moiety. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 6619–6629, 2009     

Pyrolysis of single carbon sources in SBA-15: A recyclable solid phase synthesis to obtain uniform carbon dots with tunable luminescence

Most of carbon dots (CDs) are synthesized in solutions, but the extensive use of solvents produces too much waste, needs complex purification and results in low yield. Particularly for the popular hydrothermal/solvothermal syntheses, safety issues hinder the large-scale production of CDs. Solid phase synthesis in air seems perfect to solve the above problems once for all, but nanoparticle growth in solid phase is always difficult to control. Here we suggest a new method to synthesize CDs in SBA-15 template, just by heating single carbon sources in air. Employing single carbon sources is important, which ensures both homogeneity of the nucleation and uniformity of the nanoparticle growth. The pores confinement of SBA-15 guarantees the uniform sizes of CDs, while the catalytic effect of SBA-15 accelerates the carbonization process of precursors. The products are easily extracted from the template by ethanol, and then the template can be recycled for the next synthesis after calcination. Various CDs are synthesized in this way by using different carbon sources and SBA-15 templates with different pore diameters, respectively. The results show that, the fluorescence properties of these CDs are determined by their composition and surface states, but not the particle sizes. This work opens a new avenue to synthesize uniform CDs in solid phase with high yield, low cost and tunable luminescence.