导电MOFs在能源转化中的应用

可再生能源供应方案包括析氢反应(HER)、析氧反应(OER)、氧还原反应(ORR)和二氧化碳还原反应(CO2RR)等多种反应,电催化剂对这些反应至关重要。到目前为止,已有一系列导电MOFs作为与能源相关电催化电极材料的报道。本文从提高MOFs导电能力和对产物的选择性、增强MOFs的化学稳定性及增加MOFs的反应活性位点等方面介绍了导电MOFs作为电催化剂的设计策略,重点综述了其在能源转化涉及的HER、OER、ORR以及CO2RR方面的应用,并从材料制备和应用需求角度出发, 对高性能导电MOFs材料在电催化领域所面临的挑战和前景进行了展望。     

具有高效析氧催化性能的铁基双元金属有机框架纳米棒研究

析氧反应(OER)是电解水制氢的关键步骤,开发高效、稳定、廉价的OER电催化剂是目前该领域的研究热点.碱性电解液中的OER电催化剂成分以Mn、Fe、Co、Ni等为主,其中单一组分的Fe基化合物催化活性不高,但碱性电解液中的痕量铁杂质极易掺入Ni、Co等非Fe基材料的结构中,极大影响其OER催化性能,即现有大部分非Fe基...     

高效氧催化反应中的金属有机骨架材料（英文）

氧电催化反应包括氧气还原反应(ORR)和氧气析出反应(OER).作为核心电极反应,这两个反应对诸多能源存储与转换技术(比如燃料电池、金属空气电池以及全水分解制氢等)的能量效率起决定性作用.然而,ORR和OER涉及多个反应步骤、多个电子转移过程以及多相界面传质过程.这些复杂的过程较大程度上限制了ORR和OER的反应速率.从理论和实践两个方面来看,ORR和OER都需要高效电催化剂的参与来促进其反应速率,从而能够最终提高上述能源存储与转换技术的能量转换或利用效率.目前,以Pt,Pd,Ir,Ru为代表的贵金属基电催化剂具有十分突出的电催化性能.但是,过高的成本和过低的储量始终制约着贵金属基电催化剂在催化ORR和OER反应方面,乃至在能源存储与转换技术领域的规模化应用.因而,开发高效非贵金属基氧电催化剂成为近年来能源存储与转换领域的研究重点之一.在众多已经报道的非贵金属基氧电催化剂中,金属有机骨架材料(MOFs)备受瞩目.MOFs是一类由有机配体和金属节点通过配位键自组装而成的晶态多孔材料.它们具备超高比表面积、超高孔隙率以及规则性纳米孔道.相比较其他传统的多孔材料(比如活性炭、分子筛、介孔炭、介孔氧化硅等),MOFs最主要的优势在于它们的结构和功能可以依据需求通过选择合适的有机配体和金属节点进行便利地设计,或通过后处理进行必要的改性和调节.基于独特的多孔特性以及结构与功能的可设计、可调节性,MOFs在气体分离与存储、异相催化、化学传感、药物输送、环境保护以及能源存储与转化等领域都具有潜在的应用价值.因而,近年来,MOFs备受基础研究领域和工业界的青睐.针对MOFs开展的基础研究和应用开发逐渐成为诸多领域的研究焦点.也正由于MOFs具有的上述优异特性,尤其是结构与功能的可设计、可调节性,使得设计制备基于单纯MOFs以及MOFs衍生材料成为开发高效非贵金属基氧电催化剂的新途径.本综述首先论述了基于单纯MOFs的氧电催化剂(包括纯MOFs、活性物种修饰的MOFs以及与导电材料构成的复合MOFs)的合成以及它们在ORR或OER催化反应中应用的研究进展.在第二部分论述中,本综述主要针对MOFs衍生的各类氧电催化剂(包括无机微米-纳米结构/多孔碳复合材料、纯多孔碳材料、纯无机微米-纳米结构材料以及单原子型电催化材料)的研究进展进行了简要介绍和讨论.最后,本综述对MOFs基氧电催化剂目前存在的挑战进行了简要分析;同时,也对这类氧电催化剂的通用设计准则以及未来发展方向进行了展望.尽管存在诸多挑战,MOFs始终被认为是极好的"平台"材料.充分利用它们将有利于开发高效且实用的非贵金属基氧电催化剂.     

Two-dimensional Metal-Organic Frameworks and Derivatives for Electrocatalysis

The most important topics in the world today are environmental and resource issues. The development of green and clean energy is still one of the great challenges of social sustainable development. Two-dimensional(2D) metal-organic frameworks(MOFs) and derivatives have exceptional potential as high-efficiency electrocatalysts for clean energy technologies. This review summarizes various synthesis strategies and applications of 2D MOFs and derivatives in electrocatalysis. Firstly, we will outline the advantages and uniqueness of 2D MOFs and derivatives, as well as their applicable areas. Secondly, the synthetic strategies of 2D MOFs and derivatives are briefly classified. Each category is summarized and we list classic representative fabrication methods, including specific fabrication methods and mechanisms, corresponding structural characteristics, and insights into the advantages and limitations of the synthesis method. Thirdly, we separately classify and summarize the application of 2D MOFs and derivatives in electrocatalysis, including electrocatalytic water splitting, oxygen reduction reaction(ORR), CO₂ reduction reaction(CO₂RR), and other electrocatalytic applications. Finally, the development prospects and existing challenges to 2D MOFs and derivatives are discussed.     

Stable Hierarchical Bimetal–Organic Nanostructures as HighPerformance Electrocatalysts for the Oxygen Evolution Reaction

The integration of heterometallic units and nanostructures into metal–organic frameworks (MOFs) used for the oxygen evolution reaction (OER) can enhance the electrocatalytic performance and help elucidate underlying mechanisms. We have synthesized a series of stable MOFs (CTGU‐10a1–d1) based on trinuclear metal carboxylate clusters and a hexadentate carboxylate ligand with a (6,6)‐connected nia net. We also present a strategy to synthesize hierarchical bimetallic MOF nanostructures (CTGU‐10a2–d2). Among these, CTGU‐10c2 is the best material for the OER, with an overpotential of 240 mV at a current density of 10 mA cm^?2 and a Tafel slope of 58 mV dec^?1. This is superior to RuO₂ and confirms CTGU‐10c2 as one of the few known high‐performing pure‐phase MOF‐OER electrocatalysts. Notably, bimetallic CTGU‐10b2 and c2 show an improved OER activity over monometallic CTGU‐10a2 and d2. Both DFT and experiments show that the remarkable OER performance of CTGU‐10c2 is due to the presence of unsaturated metal sites, a hierarchical nanobelt architecture, and the Ni–Co coupling effect.     

NiMn‐Based Bimetal–Organic Framework Nanosheets Supported on Multi‐Channel Carbon Fibers for Efficient Oxygen Electrocatalysis

Developing noble‐metal‐free bifunctional oxygen electrocatalysts is of great significance for energy conversion and storage systems. Herein, we have developed a transformation method for growing NiMn‐based bimetal–organic framework (NiMn‐MOF) nanosheets on multi‐channel carbon fibers (MCCF) as a bifunctional oxygen electrocatalyst. Owing to the desired components and architecture, the MCCF/NiMn‐MOFs manifest comparable electrocatalytic performance towards oxygen reduction reaction (ORR) with the commercial Pt/C electrocatalyst and superior performance towards oxygen evolution reaction (OER) to the benchmark RuO₂ electrocatalyst. X‐ray absorption fine structure (XAFS) spectroscopy and density functional theory (DFT) calculations reveal that the strong synergetic effect of adjacent Ni and Mn nodes within MCCF/NiMn‐MOFs effectively promotes the thermodynamic formation of key *O and *OOH intermediates over active NiO₆ centers towards fast ORR and OER kinetics.     

Metal-organic framework based nanomaterials for electrocatalytic oxygen redox reaction

Due to the severe environmental issues, many advanced technologies, typically fuel cells and metal-air batteries have aroused widespread concerns and been intensively studied in recent years. However, oxygen redox reactions including oxygen evolution reaction(OER) and oxygen reduction reaction(ORR) as the core reactions suffer from sluggish kinetics of the multiple electron transfer process. Currently, Pt, RuO_2, and IrO_2 are considered to be the benchmark catalysts for ORR and OER, but their high price, scarcity and instability hinder them from large-scale application. To overcome these limits, exploring alternative electrocatalysts with low cost, high activity, long-term stability, and earth-abundance is of extreme urgency. Metal-organic frameworks(MOFs) are a family of inorganic-organic hybrid materials with high surface areas and tunable structures, making them proper as catalyst candidates. Herein, the recent progress of MOFs and MOF-derived materials for ORR and OER is systematically reviewed, and the relationship between compositions and electrochemical performance is discussed. It is expected that this review can be helpful for the future development of related MOF-based materials with excellent electrochemical performance.     

金属有机骨架及其衍生材料在电解水和锌-空气电池中的应用

电解水和锌-空气电池(ZABs)技术为解决能源危机、实现碳中和目标开辟了一条新的途径。然而,这些技术的实际应用在很大程度上受到析氢反应(HER)、析氧反应(OER)以及氧还原反应(ORR)缓慢动力学的限制。因此,迫切需要开发高效、稳定的电催化剂有效降低反应过电位,加快电催化反应进程。金属有机骨架(MOFs)由于其灵活可调的组成和精确可控的结构,已成为催化领域研究最广泛的材料之一。本文聚焦于MOFs基电催化剂的制备策略和结构特性,主要介绍它们在电解水和ZABs方面近期的研究进展,并对该领域存在的问题和发展趋势进行了总结和展望。     

Metal–organic framework based bifunctional oxygen electrocatalysts for rechargeable zinc–air batteries: current progress and prospects

Zinc–air batteries (ZABs) are regarded as ideal candidates for next-generation energy storage equipment due to their high energy density, non-toxicity, high safety, and environmental friendliness. However, the slow oxygen reduction reaction (ORR) and oxygen evolution reaction (OER) kinetics on the air cathode limit their efficiency and the development of highly efficient, low cost and stable bifunctional electrocatalysts is still challenging. Metal–Organic Framework (MOF) based bifunctional oxygen electrocatalysts have been demonstrated as promising alternative catalysts due to the regular structure, tunable chemistry, high specific surface area, and simple and easy preparation of MOFs, and great progress has been made in this area. Herein, we summarize the latest research progress of MOF-based bifunctional oxygen electrocatalysts for ZABs, including pristine MOFs, derivatives of MOFs and MOF composites. The effects of the catalysts'' composites, morphologies, specific surface areas and active sites on catalytic performances are specifically addressed to reveal the underlying mechanisms for different catalytic activity of MOF based catalysts. Finally, the main challenges and prospects for developing advanced MOF-based bifunctional electrocatalysts are proposed.

The research progress of MOF-based bifunctional oxygen electrocatalysts for zinc–air batteries is reviewed and the main challenges and prospects for developing advanced MOF-based bifunctional electrocatalysts are proposed.     

Metal–Organic Frameworks as Electrocatalysts

Transition metal complexes are well-known homogeneous electrocatalysts. In this regard, metal–organic frameworks (MOFs) can be considered as an ensemble of transition metal complexes ordered in a periodic arrangement. In addition, MOFs have several additional positive structural features that make them suitable for electrocatalysis, including large surface area, high porosity, and high content of accessible transition metal with exchangeable coordination positions. The present review describes the current state in the use of MOFs as electrocatalysts, both as host of electroactive guests and their direct electrocatalytic activity, particularly in the case of bimetallic MOFs. The field of MOF-derived materials is purposely not covered, focusing on the direct use of MOFs or its composites as electrocatalysts. Special attention has been paid to present strategies to overcome their poor electrical conductivity and limited stability.     

金属有机骨架及其衍生材料在电解水和锌-空气电池中的应用

电解水和锌-空气电池(ZABs)技术为解决能源危机、实现碳中和目标开辟了一条新的途径。然而,这些技术的实际应用在很大程度上受到析氢反应(HER)、析氧反应(OER)以及氧还原反应(ORR)缓慢动力学的限制。因此,迫切需要开发高效、稳定的电催化剂有效降低反应过电位,加快电催化反应进程。金属有机骨架(MOFs)由于其灵活可调的组成和精确可控的结构,已成为催化领域研究最广泛的材料之一。本文聚焦于MOFs基电催化剂的制备策略和结构特性,主要介绍它们在电解水和ZABs方面近期的研究进展,并对该领域存在的问题和发展趋势进行了总结和展望。     

Metal–Organic Frameworks-Derived Self-Supported Carbon-Based Composites for Electrocatalytic Water Splitting

Electrocatalytic water splitting has been considered as a promising strategy for the sustainable evolution of hydrogen energy and storage of intermittent electric energy. Efficient catalysts for electrocatalytic water splitting are urgently demanded to decrease the overpotentials and promote the sluggish reaction kinetics. Carbon-based composites, including heteroatom-doped carbon materials, metals/alloys@carbon composites, metal compounds@carbon composites, and atomically dispersed metal sites@carbon composites have been widely used as the catalysts due to their fascinating properties. However, these electrocatalysts are almost powdery form, and should be cast on the current collector by using the polymeric binder, which would result in the unsatisfied electrocatalytic performance. In comparison, a self-supported electrode architecture is highly attractive. Recently, self-supported metal–organic frameworks (MOFs) constructed by coordination of metal centers and organic ligands have been considered as suitable templates/precursors to construct free-standing carbon-based composites grown on conductive substrate. MOFs-derived carbon-based composites have various merits, such as the well-aligned array architecture and evenly distributed active sites, and easy functionalization with other species, which make them suitable alternatives to non-noble metal-included electrocatalysts. In this review, we intend to show the research progresses by employment of MOFs as precursors to prepare self-supported carbon-based composites. Focusing on these MOFs-derived carbon-based nanomaterials, the latest advances in their controllable synthesis, composition regulation, electrocatalytic performances in hydrogen evolution reaction (HER), oxygen evolution reaction (OER), and overall water splitting (OWS) are presented. Finally, the challenges and perspectives are showed for the further developments of MOFs-derived self-supported carbon-based nanomaterials in electrocatalytic reactions.     

泡沫镍铁合金自支撑NiFeOOH纳米片的制备及析氧性能研究

电催化析氧反应(OER)是电解水制氢的重要半电池反应。然而,OER的缓慢动力学仍需研究高效的电催化剂。在非贵金属催化剂中,NiFe基材料是OER催化剂研究热点。本文通过食人鱼溶液简单一步浸渍刻蚀法将不同Fe含量的泡沫NiFe合金进行氧化,制备了表面具有纳米片形貌的NiFeOOH自支撑电催化剂,并深入研究其电催化析氧性能。通过SEM、XRD、XPS等对电催化剂的形貌结构及成分进行表征,证实了三维多孔基底上NiFeOOH纳米片结构的形成。由于高价镍、铁物种的存在以及二维纳米片结构的生成,NiFeOOH/NF的析氧性能大幅度提高,在10 mA?cm-2的电流密度下过电位仅155.68 mV,Tafel斜率为 88.2 mV?dec-1。这为研制高效、耐用的自支撑非贵金属电极提供了新思路。     

Bimetallic Metal‐Organic Framework‐Derived Nanosheet‐Assembled Nanoflower Electrocatalysts for Efficient Oxygen Evolution Reaction

Non‐noble metal‐based metal–organic framework (MOF)‐derived electrocatalysts have recently attracted great interest in the oxygen evolution reaction (OER). Here we report a facile synthesis of nickel‐based bimetallic electrocatalysts derived from 2D nanosheet‐assembled nanoflower‐like MOFs. The optimized morphologies and large Brunauer–Emmett–Teller (BET) surface area endow FeNi@CNF with efficient OER performance, where the aligned nanosheets can expose abundant active sites and benefit electron transfer. The complex nanoflower morphologies together with the synergistic effects between two metals attributed to the OER activity of the Ni‐based bimetallic catalysts. The optimized FeNi@CNF afforded an overpotential of 356 mV at a current density of 10 mA cm^?2 with a Tafel slope of 62.6 mV dec^?1, and also exhibited superior durability with only slightly degradation after 24 hours of continuous operation. The results may inspire the use of complex nanosheet‐assembled nanostructures to explore highly active catalysts for various applications.     

二维金属有机框架材料的合成及电催化应用

二维金属有机框架材料(MOFs)由于具备高比表面积、 多孔性以及丰富的活性位点等优异特性而受到广泛关注, 并且在电催化领域展现出巨大的应用潜力. 研究者们已在二维MOFs的可控制备与电催化性能调控方面取得许多突破性进展, 显示出相关研究对开发高性能电催化剂的关键作用. 本文总结了二维MOFs的自上而下和自下而上合成策略以及二维MOFs衍生物的典型合成方法, 概述了二维MOFs在各尺度下的电催化性能调控策略, 并介绍了各种合成方法和调控策略在电催化中的应用. 最后讨论了该领域面临的挑战, 并对未来的发展方向进行了展望.     

多孔Fe3O4修饰的Ni(OH)2纳米片的制备及其析氧性能研究

近年来,基于析氧反应(OER)的电化学能量转换体系(如电化学制氢、金属空气电池、氮气电还原和二氧化碳电还原)日益受到人们的关注.各种过渡金属基(Mn,Ni,Co,Fe,Cu等)纳米材料(硫化物、氢氧化物、氧化物、磷化物和氮化物等)被认为是潜在的、可以代替贵金属的碱性OER催化剂.其中,高活性和低成本的Ni(OH)2基电催化剂被广泛关注.由于面积效应、结构效应、电子效应和协同效应等因素,Ni(OH)2基纳米材料的电化学活性与其形貌和化学成分密切相关.引入纳米尺寸的孔,不仅加快了传质,而且增加了边缘活性原子的数量,因而有利于活性的增强.超薄二维(2D)纳米片因具有独特的结构特征,可以为电催化反应提供充足的反应位点和低配位数的表面活性原子.杂原子的引入可以调节纳米材料的电子结构和几何结构以提高它们的电催化活性.本文提出了一种简单的混合氰胶水解策略,成功合成了Fe掺杂的Ni(OH)2纳米片(Ni(OH)2-Fe H-STs).氰胶前驱体骨架结构有助于形成超薄多孔的2D结构,而且,通过调节前驱体的浓度就可以获得一定镍铁原子比的产物.不同Fe含量的Ni(OH)2纳米片的OER活性测试结果表明,Ni/Fe比为3:1的Ni(OH)2-Fe H-STs-Ni3Fe1在碱性环境中具有最佳的OER活性.由于Ni(OH)2-Fe H-STs-Ni3Fe1的超薄2D结构使大多数金属原子暴露在表面,使原子利用率最大化.同时,超薄表面上高活性的低配位数的中心原子,可以作为催化OER的高活性中心.薄片上的孔隙有效地增加了高活性边缘原子的数量并且能够加速反应物和生成物的传质.XPS测试结果表明,Fe的引入显著改变了Ni的电子结构,提高了Ni(OH)2 H-STs的导电性,从而促进了电化学过程中NiIV活性物种的产生,进而改变其OER本征活性.三维镍泡沫(NF)可以防止负载纳米材料的聚集,提高转移反应物/产物的传质速率.因此,本文将Fe掺杂的Ni(OH)2纳米片直接生长在NF基底(简写为Ni(OH)2-Fe H-STs/NF).结果表明,NF基底的引入进一步提升导电性和增加传质.综上所述,由于具有高比表面积、丰富的活性原子、Fe/Ni原子之间的协同效应以及NF基底的高导电性和三维多孔特性,通过氰胶水解法获得的Ni(OH)2-Fe H-STs/NF在KOH溶液中表现出优异的OER活性,在10 mA cm^–2电流密度下过电位仅为200 mV,Tafel斜率为56 mV dec^?1,并且材料具有良好的稳定性.     

Synthesis and Optimization of Zeolitic Imidazolate Frameworks for the Oxygen Evolution Reaction

Metal–organic frameworks/zeolitic imidazolate frameworks (MOFs/ZIFs) and their post-synthesis modified nanostructures, such as oxides, hydroxides, and carbons have generated significant interest for electrocatalytic reactions. In this work, a high and durable oxygen evolution reaction (OER) performance directly from bimetallic Zn_100−xCo_x-ZIF samples is reported, without carrying out high-temperature calcination and/or carbonization. ZIFs can be reproducibly and readily synthesized in large scale at ambient conditions. The bimetallic ZIFs show a systematic and gradually improved OER activity with increasing cobalt concentration. A further increase in OER activity is evidenced in ZIF-67 polyhedrons with controlled particle size of <200 nm among samples of different sizes between 50 nm and 2 μm. Building on this, a significantly enhanced, >50 %, OER activity is obtained with ZIF-67/carbon black, which shows a low overpotential of approximately 320 mV in 1.0 m KOH electrolyte. Such activity is comparable to or better than numerous MOF/ZIF-derived electrocatalysts. The optimized ZIF-67 sample also exhibits increased activity and durability over 24 h, which is attributed to an in situ developed active cobalt oxide/oxyhydroxide related nanophase.     

CoFe-LDH nanowire arrays on graphite felt: A high-performance oxygen evolution electrocatalyst in alkaline media

Developing non-noble-metal oxygen evolution reaction(OER) electrocatalysts with high performance is critical to electrocatalytic water splitting. In this work, we fabricated Co Fe-layered double hydroxide(LDH) nanowire arrays on graphite felt(Co Fe-LDH/GF) via a hydrothermal method. The Co Fe-LDH/GF, as a robust integrated 3 D OER anode, exhibits excellent catalytic activity with the need of low overpotential of 252 and 285 m V to drive current densities of 10 and 100 m A/cm2 in 1.0 mol/L KOH, r...