共查询到20条相似文献,搜索用时 609 毫秒
1.
The supramolecular crosslinking of polymer chains in water by specific, directional and dynamic non-covalent interactions has led to the development of novel supramolecular polymeric hydrogels. These aqueous polymeric networks constitute an interesting class of soft materials exhibiting attractive properties such as stimuli-responsiveness and self-healing arising from their dynamic behaviour and that are crucial for a wide variety of emerging applications. We present here a critical review summarising the formation of dynamic polymeric networks through specific non-covalent interactions, with a particular emphasis on those systems based on host-guest complex formation, as well as the characterisation of their physical characteristics. Aqueous supramolecular chemistry has unlocked a versatile toolbox for the design and fine-tuning of the material properties of these hydrogels (264 references). 相似文献
2.
A bisphenol A based epoxy was incorporated with a quadruply hydrogen bonded supramolecular polymer as a toughening agent to prepare a composite epoxy resin with higher impact resistance. The supramolecular polymer comprising poly-(propylene glycol) bis(2-aminopropyl) ether chains and 2-ureido-4[1H]-pyrimidinone moieties (UPy) self-assembled into spherical domains with sizes of 300 nm to 600 nm in diameter by micro phase separation in bulk epoxy matrixes. A significant improvement of 300% in impact resistance of the supramolecular polymer incorporated epoxy resin was obtained when the content of supramolecular polymer was 10 wt%. Tensile tests showed that the mechanical properties of the modified epoxy resin containing the hydrogen-bonded supramolecular polymers are also improved compared with those of the neat epoxy resin. 相似文献
3.
Polymers are an integral part of our daily life. Hence, there are constant efforts towards synthesizing novel polymers with unique properties. As the composition and packing of polymer chains influence polymer''s properties, sophisticated control over the molecular and supramolecular structure of the polymer helps tailor its properties as desired. However, such precise control via conventional solution-state synthesis is challenging. Topochemical polymerization (TP), a solvent- and catalyst-free reaction that occurs under the confinement of a crystal lattice, offers profound control over the molecular structure and supramolecular architecture of a polymer and usually results in ordered polymers. In particular, single-crystal-to-single-crystal (SCSC) TP is advantageous as we can correlate the structure and packing of polymer chains with their properties. By designing molecules appended with suitable reactive moieties and utilizing the principles of supramolecular chemistry to align them in a reactive orientation, the synthesis of higher-dimensional polymers and divergent topologies has been achieved via TP. Though there are a few reviews on TP in the literature, an exclusive review showcasing the topochemical synthesis of polymers with advanced structural features is not available. In this perspective, we present selected examples of the topochemical synthesis of organic polymers with sophisticated structures like ladders, tubular polymers, alternating copolymers, polymer blends, and other interesting topologies. We also detail some strategies adopted for obtaining distinct polymers from the same monomer. Finally, we highlight the main challenges and prospects for developing advanced polymers via TP and inspire future directions in this area.This perspective showcases the potential of topochemical polymerization as an effective tool for synthesizing polymers with advanced molecular and supramolecular structures. 相似文献
4.
Based on previous work, where it was shown that 4-urazoylbenzoic acid (U4A) groups, which are attached statistically to polybutadiene, form ordered supramolecular arrays in the unpolar polymer matrix, the present work describes the synthesis of a new molecular building block capable of self-assembling in the unpolar polymer matrix. 5-Urazoylisophthalic acid (U35A) groups attached to 1,4-polybutadiene chains cause the formation of a thermoplastic elastomer of improved properties. The clusters of functional groups show an endothermic transition. The melting temperature increases for low levels of modification from 130°C up to 190°C. The mechanical properties (stress–strain and dynamic mechanical) reveal excellent rubbery characteristics and a rubbery plateau which is considerably flatter than those of technical grade thermoplastic elastomers. The IR data indicate that the U35A groups are tetrafunctional with respect to supramolecular self-assembling. Based on detailed knowledge of the structure of the self-assembled domains in U4A groups, a model is developed which describes the observed material properties qualitatively. 相似文献
5.
Weiheng Lai Bo Qin Jiang-Fei Xu Xi Zhang 《Journal of polymer science. Part A, Polymer chemistry》2024,62(5):900-906
The integration of tailorable mechanical properties, dimensional stability, and reprocessability is of significance in the design of sustainable polymer materials. Herein, side-chain engineering is employed to fabricate cross-linked supramolecular polymers with customizable mechanical properties. Three kinds of side chains, including methyl, 1-ethyl pentyl, and 1-hexyl nonyl, are used to modify the supramonomers. Through the copolymerization of low-content supramonomers and covalent monomers, cross-linked supramolecular polyureas with a wide range of mechanical properties spanning from rigid plastics to elastic materials are successfully constructed. Specifically, the Young's modulus can be adjusted from 525 to 128 MPa by tuning the side chain of supramonomers from methyl to 1-hexyl nonyl. Meanwhile, the materials still retain exceptional recyclability and solvent resistance. Even after seven generations of recycling processes, the reprocessed cross-linked supramolecular polyureas maintain over 95% of their original mechanical properties. It is anticipated that side-chain engineering is a facile method for designing customized polymer materials to achieve both tailored mechanical properties and desirable functions. 相似文献
6.
Kyung Ju Lee Yong Woo Kim Joo Hwan Koh Jong Hak Kim 《Journal of Polymer Science.Polymer Physics》2007,45(23):3181-3188
A supramolecular material containing quadruple hydrogen bonding sites was prepared by reacting the amines of methyl isocytosine and the epoxy groups of poly (ethylene glycol diglycidyl ether). This supramolecular polymer was complexed with metal salt, that is potassium iodide, to produce polymer electrolytes, and their physical properties, specific interactions, and conductivity behavior were investigated. The ionic conductivity of polymer electrolytes continuously increased with increasing salt concentration up to 0.4 of salt weight fraction, presenting usually high solubility limit of salt in the supramolecular polymer. Wide angle X‐ray scattering data also presented that the metal salt was completely dissolved in the supramolecular polymer up to 0.4 of salt weight fraction. Upon the introduction of metal salt, the mechanical properties of the supramolecular polymer were significantly enhanced by around 10 times and the glass transition temperature of the polymer increased by about 50 °C, as revealed by complex melt viscosities and differential scanning calorimetry. These unusual behaviors of salt solubility and mechanical properties for supramolecular polymer/metal salt complexes were attributed to the strong, additional metal ion coordination to hydrogen bonding sites as well as ether oxygens of polymer matrix, as supported by FTIR spectroscopy. © 2007 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 45: 3181–3188, 2007 相似文献
7.
Pol Besenius 《Journal of polymer science. Part A, Polymer chemistry》2017,55(1):34-78
The self‐assembly into supramolecular polymers is a process driven by reversible non‐covalent interactions between monomers, and gives access to materials applications incorporating mechanical, biological, optical or electronic functionalities. Compared to the achievements in precision polymer synthesis via living and controlled covalent polymerization processes, supramolecular chemists have only just learned how to developed strategies that allow similar control over polymer length, (co)monomer sequence and morphology (random, alternating or blocked ordering). This highlight article discusses the unique opportunities that arise when coassembling multicomponent supramolecular polymers, and focusses on four strategies in order to control the polymer architecture, size, stability and its stimuli‐responsive properties: (1) end‐capping of supramolecular polymers, (2) biomimetic templated polymerization, (3) controlled selectivity and reactivity in supramolecular copolymerization, and (4) living supramolecular polymerization. In contrast to the traditional focus on equilibrium systems, our emphasis is also on the manipulation of self‐assembly kinetics of synthetic supramolecular systems. © 2016 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2017 , 55, 34–78 相似文献
8.
Ian Manners 《Journal of polymer science. Part A, Polymer chemistry》2002,40(2):179-191
Inorganic polymers are relatively unexplored because the efficient formation of macromolecular chains from atoms of transition metals and main group elements has presented a synthetic challenge. Nevertheless, these materials offer exciting opportunities for accessing properties that are significantly different from and which therefore complement those available with the well‐established organic systems. Inorganic block copolymers are of particular interest for the generation of functional, nanoscale supramolecular architectures and hierarchical assemblies using self‐assembly processes. This article focuses on research in my group over the past decade, which has targeted the development of new and controlled routes to inorganic polymers and their subsequent use in forming supramolecular materials as well as studies of their properties and applications. The use of ring‐opening polymerization (ROP) and transition‐metal‐catalyzed polycondensation approaches are illustrated. Controlled ROP procedures have been developed that allow access to polyferrocene block copolymers that self‐assemble into interesting nanoscopic architectures such as cylinders and superstructures such as flowers. The future prospects for inorganic polymer science are discussed, and a growing emphasis on the study of supramolecular inorganic polymeric materials is predicted. © 2001 John Wiley & Sons, Inc. J Polym Sci Part A: Polym Chem 40: 179–191, 2002 相似文献
9.
Vincent F. D. Peters Mark Vis Remco Tuinier 《Journal of polymer science. Part A, Polymer chemistry》2021,59(12):1175-1187
Mixtures of colloids and supramolecular polymers exhibit stimuli-responsive phase behavior. In previous work (Peters and Tuinier, Physica A 510, 233 [2018]) the polymers were treated as fully flexible chains, while in experimental systems supramolecular polymers may have a certain degree of stiffness. Here we predict that for stiff rod-like supramolecular polymers phase separation can occur at much lower polymer concentrations than for flexible supramolecular polymers. Additionally, it is demonstrated that colloid–polymer interactions can significantly influence the equilibrium polymer size distribution, however this does not strongly affect the phase behavior of the mixture. At the low polymer concentrations at which the system already gets unstable, the effect of excluded volume interactions between polymers chains themselves is small. Finally, for an experimental system it is predicted that a variety of re-entrant phase transitions may be observed within a realistic temperature range as illustrated by a specific example. 相似文献
10.
Seonae Lee Dr. Ka Young Kim Prof. Sung Ho Jung Dr. Ji Ha Lee Dr. Mihoko Yamada Dr. Ramarani Sethy Prof. Tsuyoshi Kawai Prof. Jong Hwa Jung 《Angewandte Chemie (Weinheim an der Bergstrasse, Germany)》2019,131(52):19054-19058
Finely controlled circularly polarized luminescence (CPL) supramolecular polymerization based on a tetraphenylethene core with four l ‐ or d ‐alanine branch side chains (l ‐ 1 and d ‐ 1 ) in the solution state is presented, resulting from the tuning of mechanical stimulus. Weak, green emissions of l ‐ 1 and d ‐ 1 in tetrahydrofuran (THF) were converted into strong blue emissions by tuning the mechanical stimulus. The strong blue emissions were caused by an aggregation‐induced emission (AIE) effect during the formation of a supramolecular polymer. Lag time in the supramolecular polymerization was drastically reduced by the mechanical stimulus, which was indicative of the acceleration of the supramolecular polymerization. A significant enhancement of circular dichroism (CD) and CPL signals of l ‐ 1 and d ‐ 1 was observed by tuning the rotational speed of the mechanical stimulus, implying that the chiral supramolecular polymerization was accelerated by the mechanical stimulus. 相似文献
11.
Donati F Pucci A Cappelli C Mennucci B Ruggeri G 《The journal of physical chemistry. B》2008,112(12):3668-3679
In this work, two perylene derivatives containing different peripheral alkyl chains (i.e., N,N'-bis-(hexyl)perylene-3,4,9,10-tetracarboxyldiimide (ES-PTCDI) and N,N'-bis-(2'-ethylhexyl)perylene-3,4,9,10-tetracarboxyldiimide (EE-PTCDI)) were synthesized and efficiently dispersed at low loadings (from 0.01 to 0.1 wt %) into linear low-density polyethylene (LLDPE) by processing in the melt. Spectroscopic investigations (UV-vis and fluorescence) combined with quantum-mechanical studies demonstrated the ability of both chromophores to generate aggregates among the planar structure of dyes when dissolved in solution or dispersed into LLDPE above a certain concentration. The data acquired for dyes' dispersions into the polymer matrix reveal that the optical properties and responsiveness to mechanical stimuli are strongly dependent on the compactness of perylene aggregates provided by the different molecular structure of dyes. In particular, the strong intermolecular aggregates of ES-PTCDI resulted in being more resistant toward mechanical stress and less orientable by uniaxial drawing along the drawing direction of the film, whereas the less compact and distorted supramolecular architecture of EE-PTCDI chromophores provided composite films with a remarkable optical response to mechanical solicitations. 相似文献
12.
Peptides and polymers are the “elite” building blocks in hydrogel fabrication where the typical approach consists of coupling specific peptide sequences (cell adhesive and/or enzymatically cleavable) to polymer chains aiming to obtain controlled cell responses (adhesion, migration, differentiation). However, the use of polymers and peptides as structural components for fabricating supramolecular hydrogels is less well established. Here, the literature on the design of peptide/polymer systems for self‐assembly into hybrid hydrogels, as either peptide‐polymer conjugates or combining both components individually, is reviewed. The properties (stiffness, mesh structure, responsiveness, and biocompatibility) of the hydrogels are then discussed from the viewpoint of their potential biomedical applications. 相似文献
13.
Ping Lv Xin Shen Zhiliyu Cui Bo Li Qiangqiang Xu Zhuo Yu Weijie Lu Haonan Shao Yan Ge Zhenhui Qi 《Journal of polymer science. Part A, Polymer chemistry》2021,59(23):3001-3008
Fiber-reinforced-concrete (FRC) mechanism refers short discrete fibers that are uniformly distributed and randomly oriented, which offers an effective way to improve the mechanical performance of concrete. In the design of supramolecular polymers, an analogous concept of FRC appears to have been considered very rarely-although fibrous structure has been frequently observed/generated during the supramolecular polymerization. In this work, we apply the alkane thermosets, octadecane (C18H38) and tetracosane (C24H50), taking the role of “concrete”, and the low-molecular-weight monomer with long alkyl chains as the essential “fiber” component, to fabricate the “fiber reinforced supramolecular polymer”. Very much like FRC mechanism in material science, the resulting fiber reinforced supramolecular polymer thus exhibit unusually high mechanical strength and stiffness, which is unprecedented in the conventional supramolecular strategy. 相似文献
14.
Small changes with big effects: Tuning polymer properties with supramolecular interactions
下载免费PDF全文
![点击此处可从《Journal of polymer science. Part A, Polymer chemistry》网站下载免费的PDF全文](/ch/ext_images/free.gif)
Rudy J. Wojtecki Alshakim Nelson 《Journal of polymer science. Part A, Polymer chemistry》2016,54(4):457-472
For biological polymers like DNA and proteins, supramolecular interactions dictate the folding and assembly of the polymer chains. Advances in synthetic polymer chemistry enable the synthesis of polymers of defined length and composition, but the field has yet to reach the same level of sophistication as nature's polymers. However, the incorporation of just a few supramolecular interactions into a synthetic polymer chain can drastically change the manner in which the polymer assembles and interacts, thereby altering the properties of a polymeric material. This highlight will focus on approaches wherein a low‐density of supramolecular functionalities (<10 wt %) were used per polymer chain. How the selection of the appropriate supramolecular functionality (based on the directionality and strength of the interaction), along with the location of these groups on a polymer chain, can afford a spectrum of material properties has been highlighted. At one end, the supramolecular motif can dramatically alter the elasticity of a material, and at the other, the motif can have a more subtle effect like increasing the stability of a micelle. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2016 , 54, 457–472 相似文献
15.
Bimalendu Adhikari Keisuke Aratsu Joyal Davis Shiki Yagai 《Angewandte Chemie (Weinheim an der Bergstrasse, Germany)》2019,131(12):3804-3808
Topological features of one‐dimensional macromolecular chains govern the properties and functionality of natural and synthetic polymers. To address this issue in supramolecular polymers, we synthesized two topologically distinct supramolecular polymers with intrinsic curvature, circular and helically folded nanofibers, from azobenzene‐functionalized supramolecular rosettes. When a mixture of circular and helically folded nanofibers was exposed to UV light, selective unfolding of the latter open‐ended supramolecular polymers was observed as a result of the curvature‐impairing internal force produced by the trans‐to‐cis photoisomerization of the azobenzene. This distinct sensitivity suggests that the topological features of supramolecular polymers define their mechanical stability. Furthermore, the exposure of circular supramolecular polymers in more polar media to UV irradiation resulted in ring opening followed by chain elongation, thus demonstrating that the circular supramolecular polymer can function as a topological kinetic trap. 相似文献
16.
Dr. Emilie Moulin Dr. Gad Fuks Prof. Dr. Mounir Maaloum Prof. Dr. Eric Buhler Prof. Dr. Nicolas Giuseppone 《Angewandte Chemie (International ed. in English)》2016,55(2):703-707
An acid–base switchable [c2]daisy chain rotaxane terminated with two 2,6‐diacetylamino pyridine units has been self‐assembled with a bis(uracil) linker. The complementary hydrogen‐bond recognition patterns, together with lateral van der Waals aggregations, result in the hierarchical formation of unidimensional supramolecular polymers associated in bundles of muscle‐like fibers. Microscopic and scattering techniques reveal that the mesoscopic structure of these bundles depends on the extended or contracted states that the rotaxanes show within individual polymer chains. The observed local dynamics span over several length scales because of a combination of supramolecular and mechanical bonds. This work illustrates the possibility to modify the hierarchical mesoscopic structuring of large polymeric systems by the integrated actuation of individual molecular machines. 相似文献
17.
18.
Temperature dependent nano indentation of thin polymer films with the scanning force microscope 总被引:1,自引:0,他引:1
The scanning force microscope (SFM) was used to investigate the temperature dependent micro mechanical properties of polymethylmethacrylate (PMMA) films with a thickness of 35 nm in the range of the radius of gyration. Force-distance curves were performed in the glass transition range to create permanent nanometric indentations with maximal forces up to 4 μN. Quantitative measurements of the indentation depth during and after application of the force, hysteresis energy and slope of the loading part are carried out as function of sample temperature and applied force. The glass transition of the polymer film can be clearly identified by the change of the mechanical properties of the polymer. Surprisingly, only a small change of elasticity at the glass transition is observed. 相似文献
19.
Ian Manners 《Macromolecular Symposia》2003,196(1):57-62
The efficient formation of soluble, processable polymers with main chains containing inorganic elements provides a synthetic challenge but represents potentially important approach to new macromolecular and supramolecular materials with interesting properties. This talk will survey some of the recent research performed in our group concerning the development of controlled routes to a variety of different inorganic polymer systems and the use of the resulting materials in self-assembly processes. 相似文献
20.
Prof. Dr. Takashi Uemura 《Chemistry (Weinheim an der Bergstrasse, Germany)》2014,20(6):1482-1489
Controlled organization of polymer chains into ordered structures is highly important to tune or enhance the properties of the polymeric materials. A supramolecular approach using host–guest chemistry has allowed rational design of chain assemblies with many functional properties. Nanoporous materials with ordered channel structures are particularly useful for attaining precise assemblies of polymer chains through nanoconfinement. 相似文献