Vibrational Spectra and Adsorption of Trisiloxane Superspreading Surfactant at Air/Water Interface Studied with Sum Frequency Generation Vibrational Spectroscopy

The C-H stretch vibrational spectra of the trisiloxane superspreading surfactant Silwet L-77((CH3)3Si-O-Si(CH3)(C3H6)(OCH2CH2)7-8OCH3)-O-Si(CH3)3) at the air/water interface are measured with the surface Sum Frequency Generation Vibrational Spectroscopy (SFG-VS). The spectra are dominated with the features from the –Si-CH3 groups around 2905 cm-1 (symmetric stretch or SS mode) and 2957 cm-1 (mostly the asymmetric stretch or AS mode), and with the weak but apparent contribution from the -O-CH2- groups around 2880 cm-1 (symmetric stretch or SS mode). Comparison of the polarization dependent SFG spectra below and above the critical aggregate or micelle concentration (CAC) indicates that the molecular orientation of the C¡H related molecular groups remained unchanged at different surface densities of the Silwet L-77 surfactant. The SFG-VS adsorption isotherm suggested that there was no sign of Silwet L-77 bilayer structure formation at the air/water interface. The Gibbs adsorption free energy of the Silwet surfactant to the air/water interface is -42.2±0.8kJ/mol, indicating the unusually strong adsorption ability of the Silwet L-77 superspreading surfactant     

C-H stretching vibrations of methyl, methylene and methine groups at the vapor/alcohol (N = 1-8) interfaces

In IR and Raman spectral studies, the congestion of the vibrational modes in the C-H stretching region between 2800 and 3000 cm(-1) has complicated spectral assignment, conformational analysis, and structural and dynamics studies, even with quite a few of the simplest molecules. To resolve these issues, polarized spectra measurement on a well aligned sample is generally required. Because the liquid interface is generally ordered and molecularly thin, and sum frequency generation vibrational spectroscopy (SFG-VS) is an intrinsically coherent polarization spectroscopy, SFG-VS can be used for discerning details in vibrational spectra of the interfacial molecules. Here we show that, from systematic molecular symmetry and SFG-VS polarization analysis, a set of polarization selection rules could be developed for explicit assignment of the SFG vibrational spectra of the C-H stretching modes. These polarization selection rules helped assignment of the SFG-VS spectra of vapor/alcohol (n = 1-8) interfaces with unprecedented details. Previous approach on assignment of these spectra relied on IR and Raman spectral assignment, and they were not able to give such detailed assignment of the SFG vibrational spectra. Sometimes inappropriate assignment was made, and consequently misleading conclusions on interfacial structure, conformation and even dynamics were reached. With these polarization rules in addition to knowledge from IR and Raman studies, new structural information and understanding of the molecular interactions at these interfaces were obtained, and some new spectral features for the C-H stretching modes were also identified. Generally speaking, these new features can be applied to IR and Raman spectroscopic studies in the condensed phase. Therefore, the advancement on vibrational spectra assignment may find broad applications in the related fields using IR and Raman as vibrational spectroscopic tools.     

Determination of structure and energetics for gibbs surface adsorption layers of binary liquid mixture 2. Methanol + water

Vapor/methanol and vapor/methanol-water mixture interfaces have been among the benchmark liquid interfaces under extensive experimental and theoretical investigation. In this report, we studied the orientation, structure and energetics of the vapor/methanol-water interface with newly developed techniques in sum frequency generation vibrational spectroscopy (SFG-VS). Different from the interpretations in previous SFG-VS studies for a more disordered interface at higher bulk methanol concentrations, we found that the methanol-water mixture interface is well ordered in the whole concentration region. We are able to do so because direct polarization null angle (PNA) measurement allowed us to accurately determine the CH3 orientation at the interface and to separate the orientational and interface density contributions to the SFG-VS signal. We found that the CH3 groups at the interface pointed out almost perpendicularly from the interface. We further found that this well-ordered vapor/methanol-water mixture interface has an antiparallel structure. With the double layer adsorption model (DAM) and Langmuir isotherm, the adsorption free energies for the first and second layer are obtained as -1.7 +/- 0.1 kcal/mol and 0.5 +/- 0.4 kcal/mol, respectively. Therefore, the second layer adsorption is slightly negative, and this means that replacement of the second layer water molecule with methanol molecule is energetically unfavorable. Comparing this interface with the vapor/acetone-water mixture interface reported previously, we are able to correlate the second layer adsorption free energy with the work of self-association using the pairwise self- and mutual interaction energies between the water and solute molecules. These results provided detailed microscopic structural evidences for understanding of liquid interfaces.     

利用和频振动光谱研究空气/短链脂肪酸界面的分子取向

利用和频振动光谱(SFG-VS)方法检测了5种短链脂肪酸分子(乙酸、丙酸、正丁酸、正戊酸及正己酸)在空气/纯液体界面的结构, 得到了3种偏振组合(ssp, ppp, sps)下的和频振动光谱. 通过偏振选择定则对各个谱峰进行了指认和分析, 同时计算出空气/纯脂肪酸液体界面上脂肪酸分子的甲基取向角. 对比发现, 从丙酸到己酸, 分子甲基基团的界面取向角随碳链的增长略有增大. 并对其机理进行了分析.     

Salt effect on molecular orientation at air/liquid methanol interface

The salt effects on molecular orientation at air/liquid methanol interface were investigated by the polarization-dependent sum frequency generation vibrational spectroscopy(SFG-VS). We clarified that the average tilting angle of the methyl group to be u = 308 58 at the air/pure methanol surface assuming a d-function orientational distribution. Upon the addition of 3 mol/L Na I, the methyl group tilts further away from the surface normal with a new u = 418 38. This orientational change does not explain the enhancement of the SFG-VS intensities when adding Na I, implying the number density of the methanol molecules with a net polar ordering in the surface region also changed with the Na I concentrations. These spectroscopic findings shed new light on the salt effects on the surfaces structures of the polar organic solutions. It was also shown that the accurate determination of the bulk refractive indices and Raman depolarization ratios for different salt concentrations is crucial to quantitatively interpret the SFG-VS data.     

Polarization and experimental configuration analyses of sum frequency generation vibrational spectra, structure, and orientational motion of the air/water interface

Here we report a detailed study on spectroscopy, structure, and orientational distribution, as well as orientational motion, of water molecules at the air/water interface, investigated with sum frequency generation vibrational spectroscopy (SFG-VS). Quantitative polarization and experimental configuration analyses of the SFG data in different polarizations with four sets of experimental configurations can shed new light on our present understanding of the air/water interface. Firstly, we concluded that the orientational motion of the interfacial water molecules can only be in a limited angular range, instead of rapidly varying over a broad angular range in the vibrational relaxation time as suggested previously. Secondly, because different vibrational modes of different molecular species at the interface has different symmetry properties, polarization and symmetry analyses of the SFG-VS spectral features can help the assignment of the SFG-VS spectra peaks to different interfacial species. These analyses concluded that the narrow 3693 cm(-1) and broad 3550 cm(-1) peaks belong to C(infinityv) symmetry, while the broad 3250 and 3450 cm(-1) peaks belong to the symmetric stretching modes with C2v symmetry. Thus, the 3693 cm(-1) peak is assigned to the free OH, the 3550 cm(-1) peak is assigned to the singly hydrogen-bonded OH stretching mode, and the 3250 and 3450 cm(-1) peaks are assigned to interfacial water molecules as two hydrogen donors for hydrogen bonding (with C2v symmetry), respectively. Thirdly, analysis of the SFG-VS spectra concluded that the singly hydrogen-bonded water molecules at the air/water interface have their dipole vector directed almost parallel to the interface and is with a very narrow orientational distribution. The doubly hydrogen-bonded donor water molecules have their dipole vector pointing away from the liquid phase.     

Consistency in the sum frequency generation intensity and phase vibrational spectra of the air/neat water interface

Substantial progress has been made in the quantitative understanding and interpretation of the hydrogen bonding and ordering structure of the air/water interface since the first sum-frequency generation vibrational spectroscopy (SFG-VS) measurement by Q. Du et al. in 1993 (Phys. Rev. Lett. 1993, 70, 2312-2316). However, there are still disagreements and controversies on the consistency between the different experimental measurements, as well as in the theoretical and computational results. One critical problem lies in the lack of consistency between the SFG-VS intensity measurements and the recently developed SFG-VS phase spectra measurements of the neat air/water interface, which has inspired various theoretical efforts. In this report, the reliability of the SFG-VS intensity spectra of the air/neat water interface is to be quantitatively examined, and possible sources of inaccuracies in the SFG-VS phase spectral measurement are to be discussed based on the nonresonant SHG phase measurements. Solid evidence is shown indicating that the SFG-VS intensity spectra from different laboratories are now quantitatively converging and in agreement with each other. However, the possible inaccuracies and inconsistencies in the SFG-VS phase spectra measurements need to be carefully examined against a properly corrected phase standard to take full advantage of this powerful experimental tool.     

Determination of structure and energetics for gibbs surface adsorption layers of binary liquid mixture 1. Acetone + water

The orientation, structure, and energetics of the vapor/acetone-water interface are studied with sum frequency generation vibrational spectroscopy (SFG-VS). We used the polarization null angle (PNA) method in SFG-VS to accurately determine the interfacial acetone molecule orientation, and we found that the acetone molecule has its C=O group pointing into bulk phase, one CH3 group pointing up from the bulk, and the other CH3 group pointing into the bulk phase. This well-ordered interface layer induces an antiparallel structure in the second layer through dimer formation from either dipolar or hydrogen bond interactions. With a double-layer adsorption model (DAM) and Langmuir isotherm, the adsorption free energies for the first and second layer are determined as deltaG degrees (ads,1) = - 1.9 +/- 0.2 kcal /mol and deltaG degrees (ads,2) = - 0.9 +/- 0.2 kcal /mol, respectively. Since deltaG degrees (ads,1) is much larger than the thermal energy kT = 0.59 kcal /mol, and deltaG degrees (ads,2) is close to kT, the second layer has to be less ordered. Without either strong dipolar or hydrogen bonding interactions between the second and the third layer, the third layer should be randomly thermalized as in the bulk liquid. Therefore, the thickness of the interface is not more than two layers thick. These results are consistent with previous MD simulations for the vapor/pure acetone interface, and undoubtedly provide direct microscopic structural evidences and new insight for the understanding of liquid and liquid mixture interfaces. The experimental techniques and quantitative analysis methodology used for detailed measurement of the liquid mixture interfaces in this report can also be applied to liquid interfaces, as well as other molecular interfaces in general.     

Reconsideration of second-harmonic generation from isotropic liquid interface: broken Kleinman symmetry of neat air/water interface from dipolar contribution

It has been generally accepted that there are significant quadrupolar and bulk contributions to the second-harmonic generation (SHG) reflected from the neat air/water interface, as well as common liquid interfaces. Because there has been no general methodology to determine the quadrupolar and bulk contributions to the SHG signal from a liquid interface, this conclusion was reached based on the following two experimental phenomena: the breaking of the macroscopic Kleinman symmetry and the significant temperature dependence of the SHG signal from the neat air/water interface. However, because the sum frequency generation vibrational spectroscopy (SFG-VS) measurement of the neat air/water interface observed no apparent temperature dependence, the temperature dependence in the SHG measurement has been reexamined and proven to be an experimental artifact. Here we present a complete microscopic analysis of the susceptibility tensors of the air/water interface, and show that dipolar contribution alone can be used to address the issue of the breaking of the macroscopic Kleinman symmetry at the neat air/water interface. Using this analysis, the orientation of the water molecules at the interface can be obtained, and it is consistent with the measurement from SFG-VS. Therefore, the key rationales to conclude significantly quadrupolar and bulk contributions to the SHG signal of the neat air/water interface can no longer be considered as valid as before. This new understanding of the air/water interface can shed light on our understanding of the nonlinear optical responses from other molecular interfaces as well.     

Orientation Angle of Molecules at Hexadecane-Water Interface Studied with Total Internal Reflection Second Harmonic Generation

The orientation angle is an important parameter that reflects the structure of molecules at interfaces. In order to obtain this parameter, second order nonlinear spectroscopic techniques including second harmonic generation (SHG) and sum frequency generation-vibrational spectroscopy (SFG-VS) have been successfully applied through analysis of the nonlinear signal from various polarizations. In some SHG and SFG-VS experiments, total internal reflection (TIR) configuration has been adopted to get enhanced signals. However, the reports on the detailed procedure of the polarization analysis and the calculation of the orientation angle of interfacial molecules under TIR configuration are still very few. In this paper, we measured the orientation angles of two molecules at the hexadecane-water interface under TIR and Non-TIR experimental configurations. The results measured from polarization analysis in TIR configuration consist with those obtained from Non-TIR configuration. This work demonstrates the feasibility and accuracy of polarization analysis in the determination of the orientation angle of molecules at the interfaces under TIR-SHG configuration.     

Entropically mediated polyolefin blend segregation at buried sapphire and air interfaces investigated by infrared-visible sum frequency generation vibrational spectroscopy

The segregation behavior of binary polymer blends at hydrophilic solid sapphire and air interfaces was investigated by infrared-visible sum frequency generation (SFG) vibrational spectroscopy. SFG spectra were collected from a bulk miscible blend consisting of identical molecular weight (approximately 54,000) and similar surface free energy (29-35 dyn/cm) components of atactic polypropylene (aPP) and aspecific poly(ethylene-co-propylene) rubber (aEPR). Characteristic CH resonances of the blend were contrasted with those of the individual components at both buried (sapphire/polymer) and free (air/polymer) interfaces. Preferential segregation of the aPP component was observed after annealing at both air/polymer and sapphire/polymer interfaces. SFG spectra revealed ordering of the polymer backbone segments with the methylene (CH2) groups perpendicular to the surface at the sapphire interface and the methyl (CH3) groups upright at the air interface. The SFG results indicate that the surface composition can be determined from the peak intensities that are characteristic of each component and that conformational entropy played a likely role in surface segregation. aPP occupied a smaller free volume at the surface because of a statistically smaller segment length (aPP is more flexible and has a shorter length). In addition, the high density of the ordered CH3 side branches enhanced the surface activity by allowing the long-chain backbone segments of aPP to order at the surface.     

和频振动光谱研究多晶金电极/溶液界面乙腈分子取向的flip-flop行为

用和频振动光谱研究乙腈/金电极界面,观测到乙腈的甲基振动峰强度随施加的电极电势而变化.当电极电势越过零电荷电势（pzc）时,甲基振动峰符号发生反转,这意味着基团取向发生反转（flip-flop）.由此推断出乙腈分子在金电极界面的吸附构型.即在零电荷电势下,电极界面吸附的乙腈分子构型为甲基靠近电极表面而腈基远离电极表面;而高于零电荷电势则电极界面吸附的乙腈分子构型发生反转,变为腈基靠近电极表面而甲基远离电极表面的构型.     

Vibrational exciton delocalization precludes the use of infrared intensities as proxies for surfactant accumulation on aqueous surfaces

Surface-sensitive vibrational spectroscopy is a common tool for measuring molecular organization and intermolecular interactions at interfaces. Peak intensity ratios are typically used to extract molecular information from one-dimensional spectra but vibrational coupling between surfactant molecules can manifest as signal depletion in one-dimensional spectra. Through a combination of experiment and theory, we demonstrate the emergence of vibrational exciton delocalization in infrared reflection–absorption spectra of soluble and insoluble surfactants at the air/water interface. Vibrational coupling causes a significant decrease in peak intensities corresponding to C–F vibrational modes of perfluorooctanoic acid molecules. Vibrational excitons also form between arachidic acid surfactants within a compressed monolayer, manifesting as signal reduction of C–H stretching modes. Ionic composition of the aqueous phase impacts surfactant intermolecular distance, thereby modulating vibrational coupling strength between surfactants. Our results serve as a cautionary tale against employing alkyl and fluoroalkyl vibrational peak intensities as proxies for concentration, although such analysis is ubiquitous in interface science.

Coupling between surfactant molecules at the air/water interface bleeds intensity into a diffuse background, such that single-wavelength vibrational intensity is effectively depleted at high surface coverage.     

Monolayer vibrational spectroscopy by infrared-visible sum generation at metal and semiconductor surfaces

IR-visible sum generation spectroscopy, an interface-selective probe of molecular vibrations, is used to obtain vibrational spectra of molecular monolayers on metal and semiconductor surfaces. The spectra obey electric dipole selection rules: vibrational modes must be both Raman and infrared active to show sum frequency resonances. The orientation of molecules at the interface can be determined by interference between the resonant molecular signal and a substrate background signal. Sum generation is also observed at a buried interface in the absence of a dielectric discontinuity, suggesting uses at buried molecular structures such as polymer-polymer interfaces.     

Microscopic Investigation of Ethylene Carbonate Interface: A Molecular Dynamics and Vibrational Spectroscopic Study

Ethylene carbonate(EC) liquid and its vapor-liquid interface were investigated using a combination of molecular dynamics(MD)simulation and vibrational IR, Raman and sum frequency generation(SFG)spectroscopies. The MD simulation was performed with a flexible and polarizable model of the EC molecule newly developed for the computation of vibrational spectra. The internal vibration of the model was described on the basis of the harmonic couplings of vibrational modes, including the anharmonicity and Fermi resonance coupling of C=O stretching. The polarizable model was represented by the charge response kernel(CRK),which is based on ab initio molecular orbital calculations and can be readily applied to other systems. The flexible and polarizable model can also accurately reproduce the structural and thermodynamic properties of EC liquid. Meanwhile, a comprehensive set of vibrational spectra of EC liquid, including the IR and Raman spectra of the bulk liquid as well as the SFG spectra of the liquid interface, were experimentally measured and reported. The set of experimental vibrational spectra provided valuable information for validating the model, and the MD simulation using the model comprehensively elucidates the observed vibrational IR, Raman, and SFG spectra of EC liquid. Further MD analysis of the interface region revealed that EC molecules tend to orientate themselves with the C=O bond parallel to the interface. The MD simulation explains the positive Im[χ~((2))](ssp) band of the C=O stretching region in the SFG spectrum in terms of the preferential orientation of EC molecules at the interface. This work also elucidates the distinct lineshapes of the C=O stretching band in the IR, Raman, and SFG spectra. The lineshapes of the C=O band are split by the Fermi resonance of the C=O fundamental and the overtone of skeletal stretching. The Fermi resonance of C=O stretching was fully analyzed using the empirical potential parameter shift analysis(EPSA) method. The apparently different lineshapes of the C=O stretching band in the IR, Raman, and SFG spectra were attributed to the frequency shift of the C=O fundamental in different solvation environments in the bulk liquid and at the interface. This work proposes a systematic procedure for investigating the interface structure and SFG spectra, including general modeling procedure based on ab initio calculations, validation of the model using available experimental data, and simultaneous analysis of molecular orientation and SFG spectra through MD trajectories. The proposed procedure provides microscopic information on the EC interface in this study, and can be further applied to investigate other interface systems, such as liquid-liquid and solid-liquid interfaces.     

Structure and dynamics of the solvated electron in alcohols from resonance Raman spectroscopy

Resonance Raman (RR) spectroscopy is used to probe the structure and excited-state dynamics of the solvated electron in the primary liquid alcohols methanol (MeOH), ethanol (EtOH), n-propanol (n-PrOH), and n-butanol (n-BuOH). The strong resonance enhancements (>or=10(4) relative to pure solvent) of the libration, CO stretch, COH bend, CH3 bend, CH2 bend, and OH stretch reveal significant Franck-Condon coupling of the intermolecular and intramolecular vibrational modes of the solvent to the electronic excitation of the solvated electron. All enhanced bands are fully accounted for by a model of the solvated electron that is comprised of several nearby solvent molecules that are only perturbed by the presence of the electron; no new molecular species are required to explain our data. The 340 cm(-1) downshift observed for the OH stretch frequency of e-(MeOH), relative to pure solvent, strongly suggests that the methanol molecules in the first solvent shell have the hydroxyl group directed linearly toward the excess electron density. The smaller downshifts observed for e-(EtOH), e-(n-PrOH), and e-(n-BuOH) are explained in terms of a OH group that is bent 28-40 degrees from linear. The Raman cross sections and absorption spectra are modeled, lending quantitative support for the inhomogeneous origin of the broad absorption spectra, the necessity of OH local motion in all enhanced Raman modes of the alcohols, and the dominant librational response of the solvent upon photoexcitation of the electron.     

Surfactant headgroup orientation at the air/water interface

We have used vibrational sum-frequency spectroscopy to provide the first measurement of the spectrum and orientation of the polar headgroup of a charged alkyl surfactant at the air/water interface. Sum-frequency spectra of sodium dodecyl sulfate (SDS) are used to arrive at all participating elements of the second-order susceptibility tensor. We use these chi(2) elements, together with calculated values of the hyperpolarizability, to determine the tilt of the S-O bond attached to the alkyl chain and the twist of the S-O-C plane. Thus, a full characterization of the orientation of the surfactant headgroup has been achieved. This is the first demonstration of the feasibility of sum-frequency measurements of sulfate modes in the 1100 cm-1 region, opening possibilities for future investigations of surfactant behavior in this spectral region at aqueous and solid interfaces.     

Communication: Spectroscopic phase and lineshapes in high-resolution broadband sum frequency vibrational spectroscopy: resolving interfacial inhomogeneities of "identical" molecular groups

The ability to achieve sub-wavenumber resolution (0.6 cm(-1)) and a large signal-to-noise ratio in high-resolution broadband sum-frequency generation vibrational spectroscopy (HR-BB-SFG-VS) allows for the detailed SFG spectral lineshapes to be used in the unambiguous determination of fine spectral features. Changes in the structural spectroscopic phase in SFG-VS as a function of beam polarization and experimental geometry proved to be instrumental in the identification of an unexpected 2.78 ± 0.07 cm(-1) spectral splitting for the two methyl groups at the vapor/dimethyl sulfoxide (DMSO, (CH(3))(2)SO) liquid interface as well as in the determination of their orientational angles.     

Laser Raman scattering in uniaxially oriented atactic polystyrene

Raman polarization measurements of atactic polystyrene (APS) films were recorded after uniaxial stretching. Twelve different polarization directions were observed by varying the direction and polarization of the laser and scattered radiation. The polarization behavior of several vibration modes were shown clearly in the Raman spectra. On the basis of these polarization properties and previous vibrational studies of model compounds of polystyrene as well as of monosubstituted benzene derivatives, a reassignment of some of the vibrational modes of APS is made and discussed.     

Resonance Raman spectrum of the solvated electron in methanol: simulation within a cluster model

The microsolvation of the CH(3)OH(2) hypervalent radical in methanol clusters has been investigated by density functional theory. It is shown that the CH(3)OH(2) radical spontaneously decomposes within methanol clusters into protonated methanol and a localized solvated electron cloud. The geometric and electronic structures of these clusters as well as their vibrational frequencies have been characterized. Resonance Raman intensities, associated with the s --> p transition of the unpaired electron, have been estimated for CH(3)OH(2)M(n) (M = CH(3)OH, n = 1-3) clusters. It is shown that with increasing cluster size the simulated spectra converge toward the resonance Raman spectrum of the solvated electron in methanol measured recently by Tauber and Mathies (J. Am. Chem. Soc. 2004, 126, 3414). The results suggest that CH(3)OH(2)M(n) clusters are useful finite-size model systems for the computational investigation of the spectroscopic properties of the solvated electron in liquid methanol.