无机盐对支状嵌段聚醚破乳作用的影响

通过阴离子聚合反应合成了一种七支状聚氧丙烯/聚氧乙烯(PPO/PEO)三嵌段聚醚;考察了不同无机盐存在时对原油乳状液的破乳效果的影响;通过界面张力、浊点和界面膨胀流变性的测定探讨了其界面聚集行为和破乳作用对无机盐的依赖性.结果表明,盐溶型无机离子存在时,能提高聚醚的破乳效果,而盐析型无机离子存在时,不利于聚醚的破乳作用;温度升高破乳速度加快,但45℃时脱出的水质最清.     

PEO-PPO嵌段聚醚的聚集行为及其在药物载体领域的应用

聚氧乙烯-聚氧丙烯(PEO-PPO)嵌段聚醚是一类非离子型高分子表面活性剂,其结构具有很多独特之处:分子结构具有丰富的可设计性,强烈的温度依赖的胶束化行为以及溶剂选择的多样性,这些都极大丰富了其在溶液中自组装形成聚集体的研究内容。本文结合本课题组的工作着重综述了近期国内外有关线型和支状PEO-PPO嵌段聚醚在水溶液中聚集特性的研究进展,以及酸/碱、无机盐、醇类、小分子表面活性剂和聚合物等添加剂对其聚集行为的影响。PEO-PPO嵌段聚醚具有良好的生物相容性,在水溶液中能形成以PPO链段为疏水内核, PEO链段为亲水外壳的胶束结构,该结构非常适于作为疏水药物的载体。因此本文还综述了此类嵌段聚醚作为药物载体方面的研究成果,期望为药物剂型的开发研究提供理论支持。     

X型与线型嵌段聚醚在空气/水和正庚烷/水界面上聚集行为的比较研究

通过阴离子聚合方法合成了环氧乙烷(EO)含量和分子量均相同的线型聚氧丙烯(PEO)-聚氧乙烯(PPO)(LPE)和X型聚氧丙烯-聚氧乙烯(TPE)嵌段聚醚,考察了它们在空气/水及正庚烷/水界面上聚集行为的差异.界面活性的研究结果表明,TPE降低水、正庚烷界面张力的效率和效能均低于LPE的.聚醚分子在正庚烷/水界面达到吸附平衡的时间比在空气/水表面短.由于正庚烷分子插入到聚醚吸附层中,聚醚分子可以在正庚烷/水界面上采取更为直立的状态,因此聚醚分子在正庚烷/水界面扩散较快.聚醚在正庚烷/水界面的扩张弹性高于空气/水表面的.     

原油乳状液破乳的动态法研究

The stability of different crude oil emulsions from ASP flooding production well is studied by the method of a stirred tank. The demulsifying of crude-oil emulsion by different demulsifying agents is discussed. The breakage of the crude oil emulsions from the well PO11 by the different types and concentrations of the emulsifying agents is also discussed. The breaking mechanism of the demulsifying agent is described microscopically.     

X型与线型嵌段聚醚在空气/水和正庚烷/水界面上聚集行为的比较研究

通过阴离子聚合方法合成了环氧乙烷(EO)含量和分子量均相同的线型聚氧丙烯(PEO)-聚氧乙烯(PPO) (LPE)和X型聚氧丙烯-聚氧乙烯(TPE)嵌段聚醚,考察了它们在空气/水及正庚烷/水界面上聚集行为的差异. 界面活性的研究结果表明,TPE降低水、正庚烷界面张力的效率和效能均低于LPE的. 聚醚分子在正庚烷/水界面达到吸附平衡的时间比在空气/水表面短. 由于正庚烷分子插入到聚醚吸附层中,聚醚分子可以在正庚烷/水界面上采取更为直立的状态,因此聚醚分子在正庚烷/水界面扩散较快. 聚醚在正庚烷/水界面的扩张弹性高于空气/水表面的.     

聚醚醚酮／聚醚砜嵌段共聚物的动态力学行为

本文以聚醚醚酮和聚醚砜两种齐聚物为原料合成了聚醚醚酮／聚醚砜嵌段共聚物，用动态力学谱仪对其进行了动态力学性能研究。从无定形共聚物样品对数减量－温度谱图中观察到清晰而完全分离的玻璃化转变内耗峰和非晶态向结晶态转变（α＇转变）内耗峰，确认α＇转变发生在冷结晶初期而后很快减弱。     

脂肪醇对环氧乙烷环氧丙烷嵌段共聚物破乳效果的影响 Ⅱ.O/W型乳状液的破坏

环氧乙烷(EO)环氧丙烷(PO)的共聚物有较好的破乳效果,是目前较理想的破乳剂,已在油田得到应用。这类表面活性剂的特点是只要适当调节EO和PO的比例,就既可用作W/O型乳状液的破乳剂,也可用作O/W型乳状液的破乳剂,但关于后者的研究很少。前已报导加入脂肪醇可显著提高这类表面活性剂对W/O型乳状液的破乳效果。本文继续研究脂肪醇对这类表面活性剂破坏O/W型乳状液的影响。     

破乳剂对复合驱乳状液的破乳机理研究

针对模拟采出液和三元复合驱矿场采出液,研究了破乳剂对复合体系界面张力和膜强度的影响.破乳剂浓度增加,二元复合体系界面张力降低,而三元复合体系界面张力升高.破乳剂分子部分顶替乳化剂分子并显著降低了界面膜强度.     

聚酰亚胺/聚醚刚柔嵌段共聚物的制备及其性能

以端氨基聚醚(D2000)、4,4′-二氨基二苯醚(ODA)、3,4,3′,4′-二苯醚四甲酸二酐(OPDA)为原料,合成了一系列不同硬段含量的聚酰亚胺/聚醚刚柔嵌段共聚物.通过红外光谱(FT-IR)、氢核磁共振谱(<'1H-NMR)和热失重(TGA)证实了这些共聚物的化学组成.结果显示:随着嵌段共聚物中硬段含量增加,嵌段共聚物的起始分解温度增加.原子力显微镜(AFM)扫描图像显示:该嵌段共聚物在云母片表面发生相分离,在不同浓度下组装成不同的线团状、坑状和颗粒状图形.     

聚醚类破乳剂的界面扩张流变性质

采用悬挂滴方法研究了不同结构聚醚类破乳剂与煤油间的界面张力及界面扩张流变性质. 结果表明, 4种聚醚类破乳剂均具有较强的降低界面张力能力, 且支链化程度越低分子在界面上排列越紧密, 直线型破乳剂在低浓度条件下界面张力最低. 破乳剂的分子尺寸较大, 慢弛豫过程控制界面膜性质, 吸附膜以弹性为主. 同时, 柔性聚氧乙烯链和聚氧丙烯链对界面膜性质的影响较大, 随着支链化程度增大, 界面分子间相互作用增强, 界面膜弹性增强, 黏性降低.     

Demulsification and Interfacial Properties of Crosslinking Phenol-Amine Resin Block Polyether Demulsifiers

Six novel crosslinking phenol-amine resin block polyether demulsifiers were synthesized for demulsification of surfactant-polymer flooding emulsion. The demulsification performances of these demulsifiers were investigated by conventional graduated bottle test. Their interfacial behaviors at water-oil interface were explored by dynamic interfacial tension and interfacial dilational viscoelasticity measurements. The results show that the demulsification efficiency is dependant on the hydrophilic-hydrophobic balance (HLB) value of these demulsifiers. It was also correlated to the interfacial activity and the dilational elasticity at the water-oil interface. The higher the HLB value of demulsifiers, the better the demulsification efficiency is.     

原油活性组分油水界面膜扩张粘弹性研究

研究了用超临界萃取分馏法（SFEF）从伊朗重质原油中分离的两个具有不同平均分子量的原油界面活性组分在正癸烷/水界面的扩张粘弹性行为以及温度对体系扩张粘弹性的影响.研究发现平均分子量大的样品能在油水界面形成更为牢固的界面膜.从扩张模量幅度对扩张频率的双对数曲线和扩张模量相角的频率依赖关系可以推断所有实验体系界面膜的主要的弛豫过程不是扩散弛豫,而可能主要是通过吸脱附势垒的弛豫过程.温度对两个样品的扩张粘弹性参数都有强烈的影响.升高温度可以降低膜的强度和粘度,并且改变相角的频率响应.     

疏水改性聚丙烯酰胺对原油组分界面扩张流变性质的影响

利用悬挂滴方法研究了疏水改性聚丙烯酰胺(HMPAM)对胜利采油厂高温高盐油藏采出原油中酸性活性组分和沥青质界面膜扩张流变性质的影响,考察了不同活性组分浓度条件下的界面扩张流变行为.实验结果表明:1750mg·L-1HMPAM能够在界面上形成网络结构,界面扩张模量数值高达100mN·m-1左右;油相中的酸性组分随着老化时间增加吸附到界面上,与HMPAM分子的疏水改性部分形成聚集结构,一方面通过快速的扩散交换过程大大降低扩张模量,另一方面通过与疏水改性部分的相互作用加强HMPAM分子间的缔合强度,增强网络结构的弹性.沥青质分子尺寸相对较大,分子间存在氢键等较强的相互作用,造成沥青质界面聚集体和HMPAM形成的网络结构共同决定界面膜性质,混合膜的扩张模量较单独HMPAM体系仅略有降低.     

New Amphiphilic Ionic Liquids for the Demulsification of Water-in-Heavy Crude Oil Emulsion

This work aimed to use abietic acid (AA), as a widely available natural product, as a precursor for the synthesis of two new amphiphilic ionic liquids (AILs) and apply them as effective demulsifiers for water-in-crude oil (W/O) emulsions. AA was esterified using tetraethylene glycol (TEG) in the presence of p-toluene sulfonic acid (PTSA) as a catalyst obtaining the corresponding ester (AATG). AATG was reacted with 1-vinylimidazole (VIM) throughout the Diels–Alder reaction, forming the corresponding adduct (ATI). Following this, ATI was quaternized using alkyl iodides, ethyl iodide (EI), and hexyl iodide (HI) to obtain the corresponding AILs, ATEI-IL, and ATHI-IL, respectively. The chemical structure, surface activity, thermal stability, and relative solubility number (RSN) were investigated using different techniques. The efficiency of ATEI-IL and ATHI-IL to demulsify W/O emulsions in different crude oil: brine volumetric ratios were evaluated. ATEI-IL and ATHI-IL achieved promising results as demulsifiers. Their demulsification efficiency increased as the brine ratios decreased where their efficiency reached 100% at the crude oil: brine ratio (90:10), even at low concentrations.     

PEO-PPO聚醚嵌段共聚物的表面活性及其在溶液界面的结构

利用和频振动光谱及表面张力测定技术对两亲性聚氧乙烯-聚氧丙烯(PEO-PPO)表面活性剂的表面活性及溶液界面结构进行了研究。结果表明:疏水PPO链段在溶液界面吸附并紧密排列是溶液表面张力降低的主要原因。增加溶液浓度、增大共聚物链内PPO与PEO聚合度比值可增加高分子链在界面的吸附,并使PPO在界面紧密排列,侧基(甲基)有序取向。另外,PPO在分子链中的位置也对这一行为产生影响,PPO位于分子链两端时的结构更有利于PPO在表面紧密堆积,降低界面高分子链间相互作用,减小溶液表面张力。     

扩张流变法研究表面活性剂在界面上的聚集行为

近年发展起来的界面流变测定技术在研究界面性质方面具有许多独特之处.本文结合我们的工作,总结了近年来有关该技术在表面活性剂界面聚集行为研究中的应用,讨论了扩张频率、表面活性剂浓度及疏水链长、无机盐和温度对表面扩张流变行为的影响,同时探讨了小分子表面活性剂与高分子表面活性剂表面扩张流变行为的区别以及小分子表面活性剂在气/液界面与液/液表面的扩张流变性的差异.大量研究表明,借助于界面流变性的测定不仅可以研究发生在界面上和界面附近的微观弛豫过程,而且可以探讨界面上超分子聚集体的形成,进而为乳状液和泡沫等分散体系的稳定性提供依据.     

Dilational Rheology at Air/Water Interface and Molecular Dynamics Simulation Research of Hydroxyl Sulfobetaine Surfactant

Hydroxyl sulfobetaines with hexadecyl-, octadecyl-hydrophobic chain and an industrial product hydroxyl sulfobetaine were synthesized from analytical-grade and industrial-grade tertiary amine, respectively. The dilational properties and surface tension of the three surfactants at the water-air interface were investigated by drop shape analysis and ring method. The influences of oscillating frequency and bulk concentration on dilational properties were explored. The experimental results show that the dilational module of octadecyl-hydroxyl sulfobetaine was higher than hexadecyl hydroxyl sulfobetaine and the dilational elastic component of the three surfactants were higher than dilational viscous component. Furthermore, the dilational elastic component of mixed surfactant system shows two maxima in a lower concentration than that of single surfactant system. As a result, the surface tension of mixed surfactant system reaches to minimum value in a lower concentration compared with single surfactant system. The simulation results show that the hydrophobic chains in the mixed betaine solution were more curled than in single-component betaine solution ascribed to stronger interaction among different hydrophobic chains, resulting to a more compact interfacial film.