Molecularly imprinted polymers for on-line clean up and preconcentration of chloramphenicol prior to its voltammetric determination

The performance of a molecularly imprinted polymer (MIP) as a selective solid-phase extraction sorbent for the clean-up and preconcentration of the antibiotic chloramphenicol is described. The MIP was prepared using chloramphenicol as the template, (diethylamino)ethyl methacrylate as the functional monomer, and ethylene glycol dimethacrylate as the cross-linking monomer, and using tetrahydrofuran as the solvent. Detection of chloramphenicol was carried out by square-wave voltammetry at electrochemically activated carbon fiber microelectrodes. Chloramphenicol was eluted from the MIP microcolumn with methanol. Different experimental variables (sample pH, eluent volume, analyte and eluent flow rates and sample volume) associated with the rebinding/elution process were optimized. For a 250 mL sample, a nominal enrichment factor of 500 was attained, and for a chloramphenicol concentration of 3.0x10(-8) mol L(-1) (9.7 microg L(-1)) a recovery of 96+/-4% was obtained. A range of linearity for chloramphenicol between 3.0x10(-8) and 1.0x10(-5) mol L(-1) was obtained by loading 17 mL of analyte solutions of different concentration, eluting with 0.5 mL methanol, evaporating under a stream of nitrogen and dissolving the residue in phosphate buffer of pH 7.8. The MIP selectivity was evaluated by checking several substances with similar molecular structures to that of chloramphenicol. The applicability of the MIP for both clean up and preconcentration was demonstrated by determining chloramphenicol in ophthalmic solutions and spiked milk at different concentration levels.     

Determination of chloramphenicol in urine,feed water,milk and honey samples using molecular imprinted polymer clean-up

A method for determination of low concentrations of chloramphenicol in urine, feed water, milk and honey was developed. A comparison was carried out between a routinely used analytical method based on solid phase extraction (SPE-C18) for cleaning the extract and the new procedure for the sample preparation using columns based on the molecular imprinted polymers (MIP) principle. The extracts obtained from the MIP clean-up procedure were clean enough for chromatografic analyses. Confirmatory analyses were conducted using GC/MS-NCI after derivatisation (silylation). The described method was fully validated according to CD 2002/657/EC. This method is considerably robust and allows very dirty samples to be processed. The described MIP procedure is very simple and low-time-consuming, and provides high throughput of the samples examined. This could be used for routine screening and confirmatory analyses as well.     

Chromatographic evaluation of polymers imprinted with analogs of chloramphenicol and application to selective solid-phase extraction

To obtain a highly selective material for the antibiotic chloramphenicol, which has several harmful side effects in humans, different molecularly imprinted polymers (MIPs) were prepared. In order to avoid a major traditional drawback associated with MIPs of residual template bleeding, molecules that are structurally related to chloramphenicol were used as templates for polymer synthesis. Chromatographic evaluation indicated that the employed template imparted a significant influence on the recognition properties of the corresponding polymer. A strong retention of chloramphenicol under nonpolar elution conditions (k = 68.03, IF = 17.72) and under aqueous elution conditions (k = 92.44, IF = 1.35) was achieved. After chromatographic evaluation, the MIP was utilized as the recognition sorbent in a solid-phase extraction to determine chloramphenicol using either an organic or aqueous washing solvent. Recoveries of nearly 100% from the chloramphenicol standard solution and nearly 90% from honey samples spiked with chloramphenicol were attained. Furthermore, the applicability of the MIP for sample cleanup was demonstrated.     

Improvement of extraction capability of magnetic molecularly imprinted polymer beads in aqueous media via dual-phase solvent system

In this study, a novel and simple dual-phase solvent system for the improvement of extraction capability of magnetic molecularly imprinted polymer (MIP) beads in aqueous sample was proposed. The method integrated MIP extraction and micro-liquid-liquid extraction (micro-LLE) into only one step. A magnetic MIP beads using atrazine as template was synthesized, and was applied to aqueous media by adding micro-volume of n-hexane to form a co-extraction system. The magnetic MIP beads preferred to suspend in the organic phase, which shielded them from the disturbance of water molecule. The target analytes in the water sample was extracted into the organic phase by micro-LLE and then further bound to the solid-phase of magnetic MIP beads. The beads specificity was significantly improved with the imprinting efficiency of template increasing from 0.5 to 4.4, as compared with that in pure aqueous media. The extraction capacity, equilibration process and cross-selectivity of the MIP dual-phase solvent extraction system were investigated.The proposed method coupled with high-performance liquid chromatography was applied to the analysis of atrazine, simazine, propazine, simetryn, prometryne, ametryn and terbutryn in complicated sample such as tomato, strawberry juice and milk. The method is selective, sensitive and low organic solvent-consuming, and has potential to broaden the range of MIP application in biological and environmental sample.     

加速溶剂萃取快速洗脱印迹聚合物中的模板分子

通过优化实验条件,选择洗脱温度80℃、加热时间5min、萃取压力10.4MPa、洗脱溶剂为300mL的甲醇/乙酸(90∶10,V/V),静态萃取时间8min、吹扫时间100s,对1.000g尼古丁印迹聚合物中的模板分子进行连续6次的萃取洗脱,洗脱效率达94.2%,模板渗漏量仅为9.8μg/L,萃取时间<70min。将2000mg洗脱后的印迹聚合物颗粒装填于3mL的聚丙烯固相萃取小柱中,用10mL甲醇/乙酸(90∶1,V/V)淋洗小柱,用高效液相色谱检测淋洗液中的尼古丁,获得模板的渗漏量为9.8μg/L。     

Molecularly imprinted solid-phase extraction coupled with HPLC for the selective determination of monobutyl phthalate in bottled water

A molecularly imprinted polymer (MIP) was prepared using monobutyl phthalate as template. The synthesis was optimized by using different porogens and functional monomers. The MIP was used as a selective sorbent in molecularly imprinted solid-phase extraction (MIP-SPE) for pre-concentration and determination of monobutyl phthalate (mBP) from the bottled water. The difference in recognition selectivity of the polymer columns was observed in HPLC system, and the effect of the mobile phase on the performance of MIP columns was also investigated. Control of the MIP-SPE process is seen as important in helping to facilitate the selective extraction of mBP from water samples. Thereafter, the choice of washing solvent, eluting solvent amount, pH of loading sample, flow rate of loading solution and the loading sample volume was presented. The optimized procedure was described as follows: 25 mL spiked aqueous solution was percolated through the MIP-SPE cartridge at the flow rate of 1.5 mL/min. After rinsing with acetonitrile/methanol mixture (1:1, v/v), the bound analyte was desorbed with 3 mL methanol. The developed MIP-SPE method was demonstrated to be applicable for the analysis of mBP in the bottled water.     

Synthesis and application of molecularly imprinted polymer on selective solid-phase extraction for the determination of monosulfuron residue in soil

A novel sample clean-up procedure using molecularly imprinted polymer as the solid-phase extraction material for the determination of monosulfuron residue in soil samples has been developed. The molecularly imprinted polymer (MIP) was synthesized by non-covalent method with monosulfuron as the template. The selectivity and affinity of the MIP was evaluated by equilibrium adsorption and HPLC experiments, which demonstrated that the MIP has specific affinity for the template. The template-MIP interaction was studied by investigating the influence of different mobile phases on the retention of the template, which provided basic knowledge for the selection of the washing and elution solutions in the molecularly imprinted solid-phase extraction (MISPE) process. The study indicated that polar organic solvents with hydrogen bonding abilities have stronger eluting strength for the monosulfuron. After the MISPE procedure, a clean baseline was obtained in the HPLC quantification analysis. The recoveries of the method using the combination of MISPE and HPLC were above 93% and the R.S.D. was less than 3.2% in the soil sample determinations. Low detection limit (0.08 microg g(-1), when defined as 3 times of the noise) was also obtained in the method evaluation study.     

Automated sample preparation based on the sequential injection principle. Solid-phase extraction on a molecularly imprinted polymer coupled on-line to high-performance liquid chromatography

A molecularly imprinted polymer (MIP) prepared using caffeine, as a template, was validated as a selective sorbent for solid-phase extraction (SPE), within an automated on-line sample preparation method. The polymer produced was packed in a polypropylene cartridge, which was incorporated in a flow system prior to the HPLC analytical instrumentation. The principle of sequential injection was utilised for a rapid automated and efficient SPE procedure on the MIP. Samples, buffers, washing and elution solvents were introduced to the extraction cartridge via a peristaltic pump and a multi-position valve, both controlled by appropriate software developed in-house. The method was optimised in terms of flow rates, extraction time and volume. After extraction, the final eluent from the extraction cartridge was directed to the injection loop and was subsequently analysed on HPLC. The overall set-up facilitated unattended operation, operation and improved both mixing fluidics and method development flexibility. This system may be readily built in the laboratory and can be further used as an automated platform for on-line sample preparation.     

Selective determination of trace thiamphenicol in milk and honey by molecularly imprinted polymer monolith microextraction and high-performance liquid chromatography

A novel solid-phase microextraction (SPME) method based on molecularly imprinted polymer (MIP) monolith as the sorbent for the selective extraction of thiamphenicol (TAP) in milk and honey was developed. The newly developed MIP monolith was produced using TAP as the template molecule, 4-vinylpyridine (4-VP) as the functional monomer. The TAP-MIP monolith synthesized in a micropipette tip could be connected with syringes in different sizes simply to perform SPME process without any other treatment. The derivated MIP monolith showed high selectivity and enrichment ability for TAP. A simple, rapid and sensitive method for the determination of TAP in milk and honey using polymer monolith microextraction (PMME) based on the MIP monolith combined with high-performance liquid chromatography-photodiodes array detector was developed. Several parameters affecting MIP monolith microextraction were investigated, including the flow rate, volume, pH and salt concentration of sample, the type and volume of washing solution, the type and flow rate of eluent. The recovery of this method for TAP was investigated and high recoveries of 92.9-99.3% from milk and honey were obtained with relative standard deviations less than 4.9%.     

Synthesis of a molecularly imprinted polymer for the selective solid-phase extraction of chloramphenicol from honey

Solid-phase extraction (SPE) with a molecularly imprinted polymer (MIP) as sorbent has been investigated for the clean-up of the broad-spectrum bacteriostatic antibiotic chloramphenicol (CAP) in honey samples. The MIP was prepared by using methacrylic acid (MAA) as functional monomer, ethylene glycol dimethacrylate (EDMA) as cross-linker, chloroform as porogen and CAP as template molecule. The binding behaviour of the template CAP on the MIP was evaluated by high-performance liquid chromatography, and then the MIP was applied as a sorbent in SPE to selectively extract CAP from honey. It was shown that recoveries of nearly 100% of a CAP standard solution and up to 94% from spiked honey samples could be obtained after SPE.     

Preparation, evaluation and application of molecularly imprinted solid-phase microextraction monolith for selective extraction of pirimicarb in tomato and pear

A simple, rapid and sensitive method for the determination of pirimicarb in tomato and pear using polymer monolith microextraction (PMME) based on the molecularly imprinted polymer (MIP) monolith combined with high-performance liquid chromatography-photodiodes array detector (HPLC-PAD) was developed. By optimizing the polymerization conditions, such as the nature of porogenic solvent and functional monomer, the molar ratio of the monomer and cross-linker, an pirimicarb MIP monolith was synthesized in a micropipette tip using methacrylic acid (MAA) as the functional monomer, ethylene dimethacrylate (EGDMA) as the cross-linker and the mixture of toluene-dodecanol as the porogenic solvent. The MIP monolith showed highly specific recognition for the template pirimicarb. The monolith was applied for the selective extraction of pirimicarb in tomato and pear. Several parameters affecting MIP-PMME were investigated, including the nature and volume of extraction solvent, sample volume, flow rate and sample pH. Under the optimum PMME and HPLC conditions, the linear ranges were 2.0-1400 μg/kg for pirimicarb in tomato and pear with the correlation coefficient of above 0.999. The detection limits (s/n=3) were both 0.6 μg/kg. The proposed method was successfully applied for the selective extraction and determination of pirimicarb in tomato and pear.     

Molecularly imprinted polymer with high-fidelity binding sites for the selective extraction of barbiturates from human urine

In this paper we describe the synthesis of a molecularly imprinted polymer (MIP) by precipitation polymerisation, with barbital as the template molecule, and the application of the barbital MIP as a molecularly selective sorbent in the solid-phase extraction (SPE) of barbiturates from human urine samples. The MIP was synthesised by precipitation polymerisation using 2,6-bis-acrylamidopyridine as the functional monomer and DVB-80 as the cross-linking agent. The spherical MIP particles produced were 4.2 ± 0.4 μm in diameter; a non-imprinted control polymer (NIP) in bead form was 4.8 ± 0.4 μm (mean±standard deviation) in diameter. The particles were packed into a solid-phase extraction cartridge and employed as a novel sorbent in a molecularly imprinted solid-phase extraction (MISPE) protocol. The MIP showed high selectivity for the template molecule, barbital, a feature which can be ascribed to the high-fidelity binding sites present in the MIP which arose from the use of 2,6-bis-acrylamidopyridine as the functional monomer. However, the MIP also displayed useful cross-selectivity for other barbiturates besides barbital. For real samples, the MIP was applied for the extraction of four barbiturates from human urine. However, due to the high urea concentration in this sample which interfere the proper interaction of barbiturates onto the MIP, a tandem system using a commercially available sorbent was developed.     

Approaches to the rational design of molecularly imprinted polymers

In our experience the efficient design of molecularly imprinted polymer (MIPs) for novel templates has proved difficult. Following commonly used imprinting protocols, MIPs designed against one template show both a lack of capacity and poor specificity for rebinding either the template or structurally similar analytes. Optimisation methods that involve changing one factor at a time can be laborious.A novel approach for the optimisation of MIPs using chemometrics is described. Sulfonamides, common drug residues in foodstuffs, were used as the model analytes with a methacrylic acid/ethylene glycol dimethacrylate MIP. To avoid the inaccuracies in measurement caused by template bleed a multi-analyte competition rebind assay was developed to select suitable sulfonamides to be used as the template for the MIP, and for the rebind analyte in the chemometric optimisation study. The rebinding efficiencies were monitored by HPLC. The template sulfonamide was selected as sulfamethazine (SMZ), and the rebind analyte as sulfadimethoxine (SDIM). The template:monomer:cross-linker (T:M:X) ratio of the SMZ block MIP was then optimised using a three-level full factorial design to predict a MIP with the highest rebind capacity. On synthesis this was 38.8% for SDIM in a solid phase extraction (SPE) application agreeing with the predication. The factorial design was further utilised to predict an optimum T:M:X ratio for the production of a class specific MIP, capable of binding a range of sulfonamides simultaneously. The predicted optimum T:M:X ratios of (1:10:55) and (1:10:10) were found to be different to commonly used ratios from the MIP literature.     

Fabrication of the Monolithic Fiber for the Solid Phase Micro‐extraction of Malachite Green

A monolithic fiber of molecularly imprinted polymer (MIP) was prepared by in situ polymerization within the capillary with an inner diameter of 530 µm. It was carried out in 8 min by microwave irradiation using malachite green (MG) as a template molecule, α‐methacrylic acid (MAA) as a functional monomer, acetonitrile (ACN) as a porogenic solvent, ethylene dimethacrylate (EDMA) as a crosslinker, azodiiso‐butyronitrile (AIBN) as a thermal initiator. The resulted MIP fibers were pushed out from the capillary, eluted and inserted in the capillary again, which successfully used for the solid phase microextraction (SPME) procedure. The factors affecting the extraction of MG, such as the molar ratio of template/monomer (MG/MAA), concentration of NaCl, extraction and desorption time, and extraction and desorption solvents were investigated in detail. The selectivity of the MIP fibers was compared using MG analogues crystal violet (CV) and non‐analogue Sudan II. It was also employed for the pretreatment of trace MG in the fish feed followed by high‐performance liquid chromatography (HPLC) detection. Under the optimal conditions, the linear range of MG was 10‐600 μg/L, the detection limit (LOD) was 1.23 μg/L and the recovery of spiked fish feed sample was 88.7～113.9%.     

Comparison of normal and reversed-phase solid phase extraction methods for extraction of beta-blockers from plasma using molecularly imprinted polymers

A molecularly imprinted polymer (MIP) prepared using propranolol as template, methacrylic acid (MA) and ethylene glycol dimethacrylate (EGDMA) was used to develop SPE methods in "reversed-" and normal phase mode for an analogue of propranolol (M47070) with another analogue (M45655) used as an internal standard. The compounds were also extracted in reversed-phase mode onto a non-imprinted polymer. It was necessary to employ a protein precipitation step ahead of MIP-SPE in order to facilitate downstream analysis. High extraction efficiencies and linear calibration ranges were achieved using both reversed-phase (RP) and normal phase (NP) MIP-based methods. Extraction efficiencies were lower on the non-imprinted polymer indicating stronger retention by the MIP. This stronger retention was attributed to selective imprint-based binding by the MIP that was not available for the non-imprinted polymer. Although clean extracts were obtained in both RP and NP modes, low level interference from template-related impurities or degradation products compromised detection of M47070 at low concentrations for the MIP-based methods. This interference made accuracy of the MIP-based methods poorer at low concentrations. The reversed-phase method showed marginally better accuracy and precision than the normal phase method.     

Extraction of clenbuterol from calf urine using a molecularly imprinted polymer followed by quantitation by high-performance liquid chromatography with UV detection

A method for the extraction of clenbuterol from calf urine samples using a molecularly imprinted polymer (MIP) has been developed. The aim was that the final extracts from the MIP should allow quantitation of clenbuterol down to 0.5 ng/mL urine using HPLC with UV detection. The MIP was produced using brombuterol as a template and the selectivity of the MIP, for clenbuterol, was tested against a non-imprinted polymer (produced without template) and was found to be high. After loading of 5 mL diluted centrifuged urine, selective binding was established in acetonitrile-acetic acid (98:2). For further elution of interferences, 0.5 M ammonium acetate buffer pH 5 and 70% acetonitrile in water was used. Clenbuterol was eluted using 1% trifluoroacetic acid in methanol, which was evaporated and reconstituted in buffer. Results from the HPLC analyses showed that the extraction of clenbuterol using MIP is linear in the range 0.5-100 ng/mL with good precision (4.3% for 0.6 ng/mL and 2.1% for 6.0 ng/mL) and accuracy (96.7% for 0.6 ng/mL and 96.7% for 6.0 ng/mL). The recoveries were 75%. The results show that the method offers a selectivity and sensitivity that make the quantitation of 0.5 ng clenbuterol/mL urine by HPLC-UV possible and a competitive alternative to state-of-the-art routine analytical methods.     

Molecularly imprinted polymers for the clean-up of a basic drug from environmental and biological samples

A molecularly imprinted polymer (MIP) was synthesized and evaluated to selectively extract an alpha-blocker, i.e. alfuzosin, from human plasma. The synthesis of the MIP was performed in dichloromethane with methacrylic acid as monomer and the target drug as template. A first series of experiments was carried out in dichloromethane to estimate the potential of the MIP in its specific recognition medium, i.e. dichloromethane, by developing a selective procedure and by measuring the capacity of the sorbent. An optimized procedure was developed for the selective extraction of alfuzosin with a recovery close to 100% in this medium and a specific capacity of 1.3 micromol g(-1) of MIP was measured. A study in aqueous media was also carried out by a comprehensive approach of the retention mechanism in order to build a selective procedure of extraction. The effects of the amount and of the charge of cations were studied and an optimal pH value was defined to limit matrix effects. Then, the alfuzosin MIP was then directly used to selectively extract the target drug from human plasma with an extraction recovery of 60%. Lastly, a soil was extracted by a pressurized solvent and the resulting extract was cleaned up on the MIP, showing the possibility to use this selective sorbent for the sample treatment of various complex matrices.     

Molecularly imprinted solid-phase extraction of (-)-ephedrine from Chinese Ephedra

Method of molecularly imprinted solid phase extraction (MISPE) of (-)-ephedrine from Chinese Ephedra has been developed in the research. The molecularly imprinted polymer (MIP) with good selectivity and affinity for (-)-ephedrine was synthesized with (-)-ephedrine as the template, methacrylic acid as the functional monomer. The washing and elution conditions in MISPE were selected and optimized for efficient analyte extraction and sample clean-up. A clean analytical HPLC base line of ephedra extract was obtained after MISPE, which indicated that the sample pre-treatment was efficient. Good recovery and precision were obtained in the assessment for the MISPE-HPLC procedure, which demonstrated it is a reliable method and can be used for the determination of (-)-ephedrine in herbal ephedra.     

Evaluation of a novel silica-supported sol–gel sorbent prepared by a surface molecular imprinting technique for the selective separation of estazolam from human plasma

A molecular imprinting polymer (MIP) based on surface modification of silica gel was prepared via the sol–gel process with 3-aminopropyltriethoxysilane and phenyltrimethoxysilane as functional monomers, and estazolam as the template. The imprinted silica sorbent was characterized by Fourier Transform Infrared Spectroscopy, surface elemental analysis, and scanning electron microscopy (SEM). An MIP of agglomerated nano-particles with multi-pores was grafted onto the surface of the silica gel after hydrolytic condensation of the siloxane. The imprinted silica sorbent was used for solid phase extraction (SPE). Using water as loading solvent, the extraction efficiency for estazolam was higher compared to the use of an organic solvent. The imprinted silica sorbent was selective not only for the template, but also for the analogue. Compared to C₁₈-SPE and liquid–liquid extraction, the MIP-SPE was the most feasible technique for extraction of estazolam from human plasma; up to 98.7?±?1.2% recovery was achieved.     

Preparation of a molecularly imprinted polymer for the solid-phase extraction of scopolamine with hyoscyamine as a dummy template molecule

Molecularly imprinted polymers (MIPs) selective for scopolamine were produced using hyoscyamine (a close structural analogue) as template molecule. The produced polymers were used as media for solid-phase extraction, exhibiting selective binding properties for the analyte from biological samples. Human and calf urine and serum were processed on the MIP under various extraction protocols. The best performance was observed after loading the analyte in aqueous environment facilitating retention on the MIP by non-selective hydrophobic interactions. The MIPs were subsequently washed using an optimised solvent system to enable selective desorption of the analyte. Other related and non-related compounds were accessed to evaluate molecular recognition properties. Recoveries of up to 79% were achieved for the analyte of interest from biological samples.