Langmuir–Blodgett films of octadecanethiol on gold sols subphase

An octadecanethiol monolayer was formed on an aqueous gold sols subphase, it’s LB films were characterized by means of π-A isotherms, TEM (transmission electron microscopy), XRD (X-ray diffraction) and UV–Vis spectroscopy.     

Effects of substrate on the melting behavior of Cd arachidate Langmuir–Blodgett films

Nineteen monolayered Cd arachidate films were deposited on float glass substrate coated with Si and Ni over-layers. Two layers have been chosen with very different surface free energies. Melting behavior of films were studied using variable temperature X-ray specular reflectivity and Fourier transform infrared spectroscopy measurements. In conformity with earlier studies, melting of the multilayer precede by a transition from distorted hexagonal to hexaticlike phase. However, the transition temperature to hexaticlike phase as well as the melting temperature depend significantly on the type of layer. Both the transition temperatures are higher for the multilayer deposited on Ni layer as compared to those for the film deposited on Si layer. These results can be understood in terms of different surface free energies of Ni and Si layers. Further, in case of Ni layer, transition to hexaticlike phase is relatively sharper. Even in the molten state there is a significant difference in the structure of the Cd arachidate film on two layers; packing density of molecules in molten state is lower in case of substrate with higher surface free energy. These results suggest that the surface free energy of substrate plays a significant role in melting behavior of Langmuir–Blodgett films.     

A multiscale structural study of nanoparticle films prepared by the Langmuir–Blodgett technique

Arrays of magnetic nanoparticles (NPs) represent a very interesting challenge toward the development of new devices for magnetic applications such as data storage and spintronic. The final properties of such assemblies depending essentially on the spatial arrangement of NPs, it is of first importance to investigate precisely their structure. Here, the structure of monolayer and multilayer films of magnetic iron oxide NPs assembled by the Langmuir–Blodgett (LB) technique has been studied by usual techniques such as SEM, AFM and ellipsometry and by a new and an easy to process enhanced optical technique: the Surface Enhancement Ellipsometry Contrast (SEEC) microscopy. This technique is based on the use of a new generation of microscope slides used as substrates which allow the strong enhancement of the sample contrast to a point where it becomes possible to visualize the structure of monolayer and multilayer films at the nanoscale with a conventional optical microscope. The SEEC microscopy is demonstrated to be complementary to usual characterization techniques to study the structure of NPs films, especially for films containing very small nanosized NPs which are more difficult to analyze by usual techniques. While the film structure is investigated with lateral resolution of microns, the layer thickness is analyzed at the nanoscale (with a precision of 0.3 nm) with a close fit to the experimental measurements on local (AFM) and on larger (ellipsometry) areas. This technique presents the advantage to visualize directly the topography of NPs assemblies on very large areas by extracting information such as the height profile, the film roughness and generating 3D images.     

An infrared study on Langmuir–Blodgett films of octadecylammonium octadecanoate: FWHM and the vibrational coupling

The monolayer of the mixture of octadecanoic acid and octadecylamine with molar ratio 1:1 has been investigated at the air–water interface. It was found that the monolayer shows a rather stable state at the surface pressure of 30 mN/m and this monolayer can be transferred onto a CaF₂ plate by Langmuir–Blodgett (LB) technique. The infrared spectra of LB films indicated that octadecylammonium octadecanoate is formed by an intermolecular proton exchange between adjacent carboxylic and aminic groups (COO⁻ and NH₃⁺). In three-layer LB film, the CH₂ scissoring mode of the long hydrocarbon chains of octadecylammonium octadecanoate shows a broad band feature at about 1468 cm⁻¹ while this vibrational mode of three-layer LB film of the mixture (1:1) of deuterated stearic acid and octadecylamine (octadecylammonium octadecanoate-d35, C₁₈H₃₇NH₃⁺C₁₇D₃₅COO⁻) only shows a narrow band. The broad feature of the CH₂ scissoring mode in octadecylammonium octadecanoate probably originates from the coupling between the chain of stearic acid and that of octadecylamine while this kind of coupling could be completely removed in octadecylammonium octadecanoate-d35. Another conclusion presented in this paper is that there are no couplings among the chains of fatty acid or among the chains of octadecylamine in LB films of octadecylammonium octadecanoate.     

UV photoelectron spectroscopic study of the photopolymerization of long-chain diacetylene monocarboxylic acid in Langmuir—Blodgett films

Photopolymerization of diacetylene monocarboxylic acid in Langmuir—Blodgett films was studied by UV photoelectron spectroscopy. Upon polymerization, the ionization threshold energy decreased by 1.6 eV from 6.7 (monomer) to 5.1 eV (polymer). No change of the threshold was found between the blue and red forms of the polymer. This suggests that the polymer chain is in the acetylenic form in both forms. The mechanism of spectra sensitization by dyes is also discussed.     

Induced Collapse in the Formation of Alternating Langmuir–Blodgett Films

Two compounds whose molecules have large dipole moments, strereoregular perfluorinated alkylmethacrylate-co-methacrylic acid (A) and p-octadecylaminoazobenzene-p"-sulfamide (B), were used to assemble Langmuir–Blodgett polar films by the alternating method to achieve high polarization. According to estimates, the dipole moment of the dimeric unit of copolymer A is equal to about 4 D, the dipole moment of compound B, to 12 D. Unusually high (several units) transfer ratio was observed for the monolayer B when preparing the structures of (AB) _n type. The monolayers were stable during their formation process. Upon the pause of a substrate when passing through the monolayer B, the monolayer area remained strictly constant. According to the model proposed, the monolayer looses its stability and locally collapses in the meniscus zone at the contact line of the monolayer B and substrate due to an increase in the electrostatic repulsion between the dipoles of molecules B. The validity of this model is confirmed by the data of small-angle X-ray diffraction and atomic force microscopy for various alternating Langmuir–Blodgett films.     

Microcrystalline domains of monolayer and multilayer BDN-SA Langmuir–Blodgett films

Monolayer and multilayer BDN(Bis(4-diethyannodithiobenzil)nickel)-SA(stearyl alcohol) LB (Langmuir–Blodgett) films were prepared and the characteristics of microcrystalline domains were studied using UV–vis.–NIR and AFM. The results indicate that BDN-SA LB films consist of numerous ball-like microcrystalline domains at size scales from a few tens to a few hundreds of nm. AFM images of a multilayer LB film show that well-ordered molecular arrangements exist on the surface of domains which resemble a mosaic structure. The relationship between the mean size of the domain of a BDN-SA LB film with the thickness of the film was also shown.     

Analysis of organic acids and phenols of interest in the wine industry using Langmuir–Blodgett films based on functionalized nanoparticles

A chemically modified electrode consisting of Langmuir–Blodgett (LB) films of n-dodecanethiol functionalized gold nanoparticles (S_DODAuNP-LB), was investigated as a voltammetric sensor of organic and phenolic acids of interest in the wine industry. The nanostructured films demonstrated interfacial properties being able to detect the main organic acids present in grapes and wines (tartaric, malic, lactic and citric). Compared to a bare ITO electrode, the modified electrodes exhibited a shift of the reduction potential in the less positive direction and a marked enhancement in the current response. Moreover, the increased electrocatalytic properties made it possible to distinguish between the different dissociable protons of polyprotic acids. The S_DODAuNP-LB sensor was also able to provide enhanced responses toward aqueous solutions of phenolic acids commonly found in wines (caffeic and gallic acids). The presence of nanoparticles increased drastically the sensitivity toward organic acids and phenolic compounds. Limits of detection as low as 10⁻⁶ mol L⁻¹ were achieved. Efficient catalytic activity was also observed in mixtures of phenolic acid/tartaric in the range of pHs typically found in wines. In such mixtures, the electrode was able to provide simultaneous information about the acid and the phenol concentrations with a complete absence of interferences.     

Nonradiative energy transfer in mixed Langmuir monolayers and Langmuir–Blodgett films of compounds of different chemical composition and structure

Russian Chemical Bulletin - The efficiency of the Förster resonance energy transfer (FRET) in a monolayer film containing the energy donor and energy acceptor fluorophores is low since the...     

Preparation and characterisation of monolayers and Langmuir–Blodgett films of liquid crystal mixed with cubic silsesquioxanes

Polyhedral oligomeric silesquioxanes (POSS) with eight polyether substituents were mixed with the liquid crystal (LC) 4-octyloxy-4′-cyanobiphenyl and spread at the air/water interface. The surface pressure-area and surface potential-area isotherms were recorded for different weight ratios of both components. The obtained results showed that POSS molecules had beneficial influence on LC monolayer improving its stability and rigidity. Moreover, it was found that some LC–POSS mixtures collapse reversibly and form multilayer films on the top of LC monolayer. On the other hand, interfacial dilatational and shear rheology indicated decrease of elasticity of the films after mixing. Brewster angle microscopy revealed multilayer structure of the condensed film and formation of net-like structures in the expanded film. These films were successfully transferred on solid substrates using the Langmuir–Blodgett technique. The scanning electron microscopy images confirmed the film deposition and formation of networks by POSS–LC mixtures. These findings may be useful in the fabrication of electronic devices based on LCs.     

Synthesis and photoreaction of Schiff bases derived from p-nitro cinnamaldehyde and diamines in Langmuir and Langmuir–Blodgett films

Monolayers of Schiff bases derived from ethylene diamine and o-phenylene diamine with p-nitro cinnamaldehyde, (compounds 1 and 2) at air/water interface have been studied. Photolysis of 1 in chloroform solution undergoes cis–trans isomerization on irradiation of white light while compound 2 does not undergo isomerization under photolytic conditions. The photolysis of 1 and 2 in Langmuir–Blodgett films (LB films) transferred to quartz plates form dimers. The change in product distribution is attributed to the influence of bridging group of the cinnamaldehyde moieties, molecular configuration and mobility of the compounds in solution, solid state and the aggregation of molecules in monolayer assemblies.     

An X-ray spectroscopy study of CdS nanoparticles formed by the Langmuir–Blodgett technique on the surface of carbon nanotube arrays

The composition and electronic structure of cadmium sulfide (CdS) nanoparticles formed by the Langmuir–Blodgett (LB) technique on clean silicon wafers and the surface of vertically aligned carbon nanotube (CNT) arrays are studied by X-ray photoelectron spectroscopy (XPS) and near-edge X-ray absorption fine structure (NEXAFS) spectroscopy. The samples were annealed in a vacuum at 175 °C and 225 °C to remove the organic matrix of the LB film. From the analysis of the XPS data the increased concentration of sulfate groups on the surface of CdS nanoparticles formed on CNTs and the electron density transfer from CdS to CNTs are determined. An increase in the LB film annealing temperature causes an increase in the degree of crystallinity and the CdS crystallite size and a decrease in the photoluminescence intensity of a CdS–CNT hybrid.     

Composite Langmuir–Blodgett (LB) films of polyaniline and cadmium stearate

Composite monolayers of cadmium stearate and polyaniline processed with camphor sulphonic acid have been obtained at the air–water interface and subsequently transferred onto substrates as uniform Langmuir–Blodgett multilayers. Pressure–area (Π-A) isotherm studies indicated that polyaniline molecules are not squeezed out of the cadmium stearate matrix during compression or in the compressed state. Monolayer stability is seen to decrease when the polymer content is increased beyond 60% (in weight) which is probably associated with the formation of microaggregates that also affected the monolayer surface potential at large areas per molecule. With increasing amount of polyaniline in the mixture, a transition from Y-type to Z-type deposition has been observed. Transferred multilayer LB films were characterized by UV-vis, FTIR, XRD, surface potential, and dc electrical conductivity measurements. UV-vis results indicated that though the polyaniline was in the doped state in the spreading solution, the transferred films were in the emeraldine base state. FTIR studies revealed that the transferred films mainly contained cadmium stearate salt in addition to polyaniline. XRD results indicated that the stacking order is dependent on the polyaniline content in the composite films, the order was found to decrease upon increasing the polymer amount. The uniformity of transferred films was confirmed by surface potential studies. A possible packing arrangement in these composite Langmuir and Langmuir–Blodgett films has been proposed.     

Orientation of the alkyl side chains and glucopyranose rings in Langmuir–Blodgett films of a regioselectively substituted cellulose ether

An arrangement for the long alkyl side chains in a Langmuir–Blodgett (LB) film from regioselectively alkylated 2,3-di-O-octadecylcellulose on an Au-coated substrate was investigated using Fourier transform infrared reflection absorbance spectroscopy. The IR results indicated that the hydrophobic long alkyl side chains were forced to be repellent to the surface of water, resulting in deposition on the substrate, with it being tilted in the vertical direction, and further formed both hexagonal and orthorhombic crystalline structures up to 10 layers in the LB film. In addition, molecular modeling with CAChe software indicated that the optimized assembly of the side chains was supposed to own a vertical arrangement against the substrate surface after compression of the monolayer. This means that the conformation of 2₁ screw of the cellulose molecular chain may be altered by the compression to have an unusual conformation by a different φ–ψ dihedral angle such as onefold axis without a symmetry element.     

Effects of silver nanoparticles doping on morphology and luminescence behaviour of ferroelectric liquid crystals Langmuir–Blodgett films

We report the deposition of Langmuir–Blodgett (LB) thin films of low-weight dispersed composite systems of ferroelectric liquid crystals (FLCs)–functionalised silver (Ag) nanoparticles. Because of their amphiphilic nature the molecules form stable Langmuir monolayers, which were transferred to silicon substrates. We noticed that absorption wave numbers are present for each bond constituting FLC–nanoparticles composite system, ensuring a complete transfer of molecules from water sub-phase. XRD showed intense peaks at 2θ = 3.2° due to the layer structure of FLC molecules. We infer from the morphology of LB films that doping of nanoparticles do not provide any hindrance to SmC* layer structure of FLC molecules. The photoluminescence study indicates blue shift in emission spectra and peak intensity increases with Ag nanoparticles concentration.     

Optical,electrical, and thermochromic properties of polyazothiophene Langmuir–Blodgett films

The conductivity and luminescence of conjugated polymers may be combined with the photoisomerization capability of azobenzene materials to achieve unique properties for a variety of applications, particularly if conjugated polymers with azobenzene side chains are processed as nanostructured films. In this study, we report on Langmuir–Blodgett (LB) films of a polythiophene-bearing azobenzene moieties, which displayed photoluminescence, thermochromism, electroactivity, and photoinduced birefringence. The latter three properties were enhanced in the LB films, as compared to spin-coated films of the polyazothiophene, and this has been attributed to differences in film morphology that could be probed with atomic force microscopy.     

Interaction of poly-L-lysine with photosynthetic reaction center for the Langmuir–Blodgett film preparation

The interaction between poly-L-lysine (PLL) and photosynthetic reaction center (RC) from Rodopseudomonas viridis was studied with special interest for the Langmuir–Blodgett (LB) film preparation. PLL of low concentration (0.5mM) in the subphase of the LB trough as a counterion stabilized the protein at the air/water interface and enhanced the protein deposition efficiency onto the substrate. PLLs of various degree of polymerization (n=1, 5, 10, 15 and 20) were synthesized and the effect of each PLL was examined. Enhancement of the deposition of RC was observed using high n peptide (n=10, 15 and 20) but not using low n one (n=1 and 5). When PLL (n=1, 5, 10, 15 and 20) was added to the RC solution, the protein–protein association and the subsequent precipitation of RC occurred. Highly polymerized PLLs were effective on both RC deposition and RC precipitation suggesting that RCs spread at air/water interface were linked by PLL. The number of PLL molecules which were adsorbed on one RC molecule was 9.0 (±1.5) and 6.6 (±0.5) in the case of n=10 and 20 of PLL, respectively.     

Surface plasmon resonance research on photoinduced switch properties of liquid crystalline azobenzene polymer Langmuir–Blodgett films

We report a novel phenomenon of photoisomerization-induced switch properties in liquid crystalline azo-benzene polymer poly{2-hydroetheyl methacrylate}-co-{6-[4-(S-2-methyl-1-butyloxycarbonylphenylazo) phenoxy]hexyl methacrylate} Langmuir–Blodgett (LB) monolayers. These monolayers were deposited on gold film and irradiated with UV (360 nm) and blue (450 nm) light. The switch properties were investigated by the surface plasmon resonance (SPR) technique. A method called photoinduced patterning was used for the fabrication of a model molecular device. It has been found that the photoinduced process of writing and erasing in such devices can be repeated for tens of cycles.     

Verification of epitaxial growth and determination of chain positions in Langmuir—Blodgett films of lead stearate on mica

We have determined from X-ray diffraction that lead stearate, which like many hydrocarbon compounds does not form good crystals in bulk, can be grown epitaxially on mica using the Langmuir—Blodgett technique. The strong alternation in intensities of the (11l) peaks cannot be explained by considering the lead ions only, and imply that the hydrocarbon chains do not close-pack into a triangular array but reproduce the in-plane structure of the lead ions.