Preparation of azulene-derived fulvenedialdehydes and their application to the synthesis of stable adj-dicarbaporphyrinoids

A "2 + 2" strategy for synthesizing adj-dicarbaporphyrinoid systems has been developed. In a model study, an azulenylmethylpyrrole dialdehyde was condensed with a dipyrrylmethane in the presence of HCl, followed by oxidation with ferric chloride, to give a modest yield of an azuliporphyrin. Fulvene aldehydes were prepared by reacting an indene-derived enamine with azulene aldehydes in the presence of Bu(2)BOTf, and azulene dialdehydes similarly reacted to give fulvene dialdehydes. The dialdehydes were condensed with dipyrrylmethanes in TFA/dichloromethane to afford good to excellent yields of dicarbaporphyrinoids with adjacent indene and azulene subunits. These 22-carbaazuliporphyrins exhibited significant diatropic character, and this property was magnified upon protonation. These characteristics are attributed to tropylium-containing resonance contributors that possess 18π electron delocalization pathways. Protonation studies demonstrated that C-protonation readily occurred at the interior indene carbon, but deuterium exchange also occurred at the internal azulene CH as well as at the meso-positions with TFA-d. Reaction of a carbaazuliporphyrin with silver(I) acetate in methanol or ethanol solutions also gave unusual nonaromatic dialkoxy derivatives.     

Synthesis of sterically hindered aromatic dialdehydes

A study was carried out on the formylation of a series of aromatic compounds containing two mesitylene or durene residues [dimesityl (I), dimesitylmethane (II), 1,2-dimesitylethane (III), 1,6-dimesitylhexane (IV), dimesityl sulfide (V), 1,1-dimesitylethylene (VI), 1,1-dimesityl-1-butene (VII), and didurylmethane (VIII)] by the action of dichloromethyl methyl ether (DCM) in the presence of A1C1₃ and TiCl₄. The corresponding dialdehydes are the major products. The formylation products when the reaction is carried out in the presence of A1C1₃ in the case of (I) and (V) contain significant amounts of monoaldehydes, while partial cleavage of the substrates with the formation of products containing only one benzene ring is observed in the case of (II) and (VIII) in addition to formylation.Translated from Izvestiya Akademii Nauk SSSR, Seriya Khimicheskaya, No. 7, pp. 1700–1703, July, 1991.     

Porphyrins with exocyclic rings. Part 25: synthesis of porphyrins with a fused cyclic ether subunit from tetrahydro-4H-pyan-4-one

A novel porphyrin system with a fused dihydropyran ring has been synthesized from commercially available 4-oxotetrahydropyran. The cyclic ketone reacted with oximes derived from acetoacetate esters in the presence of zinc dust, sodium propionate, and propionic acid at 150-155 °C to give good yields of 5-oxatetrahydroindoles. A low yield of a benzo-fused analog was also obtained using 4-oxochromanone as the starting reagent. Reaction of the b-annelated pyrroles with N-chlorosuccinimide gave the 7-chloro-derivatives and these underwent an acid catalyzed condensation with α-unsubstituted pyrroles to give dipyrrolic products linked by a dihydropyran moiety. Hydrogenolysis of a dipyrrole dibenzyl ester gave the corresponding dicarboxylic acid and this was converted into a dialdehyde by treatment with TFA-CH(OMe)₃. MacDonald ‘2+2’ condensation with two different dipyrrylmethanes under optimized conditions afforded the porphyrin ethers in 30-36% yield. This approach provides a pilot study for the synthesis of porphyrin crown ether structures. In addition, insightful results on the conformations of dihydropyran-linked dipyrroles were obtained by careful examination of their proton NMR spectra in CDCl₃ and DMSO-d₆.     

Synthesis of sapphyrins, heterosapphyrins, and carbasapphyrins by a "4 + 1" approach

Sapphyrins are an important group of expanded porphyrins that show valuable anion binding characteristics. In this study, a "4 + 1" route to sapphyrin systems has been developed. Reaction of dialdehydes with a known tetrapyrrole intermediate 11b incorporating a bipyrrolic subunit afforded a wide range of sapphyrin-type products. The best conditions for these reactions involved carrying out the condensation of the dialdehydes with the tetrapyrrole in TFA-dichloromethane, followed by oxidation with dilute aqueous solutions of ferric chloride. A pyrrole dialdehyde reacted under these conditions to give sapphyrin in 50% yield, while furan and thiophene dialdehydes afforded the corresponding oxa- and thiasapphyrins in 66-90% yield. Pyrrole dialdehydes with fused phenanthrene or acenaphthylene rings also reacted with 11b to give the related phenanthro- and acenaphthosapphyrins in excellent yields. As was the case for acenaphthoporphyrins, the acenaphthosapphyrin gave longer wavelength absorptions than the corresponding phenanthrene fused structure, although the differences were not as marked as those seen in the porphyrin series. Reaction of 11b with 1,3-diformylindene gave a benzocarbasapphyrin in 38% yield, while a triformyl cyclopentadiene reacted with the tetrapyrrole to give a carbasapphyrin aldehyde in 7-12% yield. The free base carbasapphyrins were unstable but the monoprotonated hydrochloride salts could easily be isolated and characterized. Carbasapphyrins retain a strong diatropic ring current due to the presence of 22pi electron delocalization pathways. In the presence of trifluoroacetic acid, C-protonated dications are generated. Condensation of 1,3-azulenedicarbaldehyde with 11b gave an azulisapphyrin dihydrochloride salt in 35% yield, and this also showed a strong diatropic ring current. Addition of base gave the unstable free base form, while pyrrolidine formed an unstable adduct that showed an intense Soret band at 480 nm. These results demonstrate that many of the themes observed for modified porphyrins and carbaporphyrins also apply to the sapphyrin series, although in some cases reduced stability hampers these investigations.     

Hydrogen‐Bond‐Driven Controlled Molecular Marriage in Covalent Cages

A supramolecular approach that uses hydrogen‐bonding interaction as a driving force to accomplish exceptional self‐sorting in the formation of imine‐based covalent organic cages is discussed. Utilizing the dynamic covalent chemistry approach from three geometrically similar dialdehydes ( A , B , and D ) and the flexible triamine tris(2‐aminoethyl)amine ( X ), three new [3+2] self‐assembled nanoscopic organic cages have been synthesized and fully characterized by various techniques. When a complex mixture of the dialdehydes and triamine X was subjected to reaction, it was found that only dialdehyde B (which has OH groups for H‐bonding) reacted to form the corresponding cage B₃X₂ selectively. Surprisingly, the same reaction in the absence of aldehyde B yielded a mixture of products. Theoretical and experimental investigations are in complete agreement that the presence of the hydroxyl moiety adjacent to the aldehyde functionality in B is responsible for the selective formation of cage B₃X₂ from a complex reaction mixture. This spectacular selection was further analyzed by transforming a nonpreferred (non‐hydroxy) cage into a preferred (hydroxy) cage B₃X₂ by treating the former with aldehyde B . The role of the H‐bond in partner selection in a mixture of two dialdehydes and two amines has also been established. Moreover, an example of unconventional imine bond metathesis in organic cage‐to‐cage transformation is reported.     

Porphyrins with exocyclic rings. Part 19: Efficient syntheses of phenanthrolinoporphyrins

5-Nitro-1,10-phenanthrolines react with isocyanoacetate esters in the presence of DBU in THF to give excellent yields of the corresponding phenanthrolinopyrroles. These were condensed with acetoxymethylpyrroles using catalytic quantities of p-toluenesulfonic acid in acetic acid to give dipyrrylmethanes, but these structures proved to be poorly suited for porphyrin synthesis due to the electron-withdrawing nature of the fused phenanthroline unit. However, phenanthrolinopyrrole ethyl esters could be converted to the corresponding α-unsubstituted pyrroles with KOH in ethylene glycol at 180-190 °C, and these condensed with 2 equiv of acetoxymethylpyrroles in refluxing acetic acid-isopropyl alcohol to give tripyrranes. In a one pot procedure, tripyrrane di-tert-butyl esters were treated with TFA at room temperature to cleave the protective groups, diluted with dichloromethane, reacted with pyrrole dialdehydes and oxidized to afford phenanthrolinoporphyrins in 52-83% yield. These conditions also allow the synthesis of porphyrins with additional fused acenaphthylene or phenanthrene rings. Although the UV-vis spectra for these porphyrins are unexceptional, the presence of an external coordination site allows many potential applications to be considered. Porphyrins with two phenanthroline units could not be prepared by the ‘3+1’ strategy. Instead, α-unsubstituted phenanthrolinopyrroles were reacted with a bis(dimethylaminomethyl)pyrrole in refluxing acetic acid to give moderate yields of the corresponding opp-diphenanthrolinoporphyrins. In one case, a triphenanthrolinoporphyrin and trace amounts of an adj-diphenanthrolinoporphyrin were formed as by-products.     

Nickel(II)-catalyzed carbon-carbon bond formation reaction of functionalized organozinc reagents with aromatic aldehydes

In the presence of a silylating reagent and catalytic amount of Ni(acac)₂, organozinc halides reacted with aromatic aldehydes to give the corresponding dialkylation products in good to excellent yields under mild conditions.     

Synthesis of a series of aromatic benziporphyrins and heteroanalogues via tripyrrane-like intermediates derived from resorcinol and 2-methylresorcinol

Tripyrrane analogues were prepared by reacting resorcinol or 2-methylresorcinol with 2 equiv of an acetoxymethylpyrrole in the presence of p-toluenesulfonic acid and calcium chloride. Following removal of the benzyl ester protective groups, the resorcinol-derived benzitripyrrane was reacted with a pyrrole dialdehyde to give an aromatic hydroxyoxybenziporphyrin. However, furan and thiophene dialdehydes gave highly insoluble products that could not be fully characterized. The methylresorcinol-derived tripyrrane analogue reacted with pyrrole, furan, thiophene, and selenophene dialdehydes to give unstable porphyrinoids that were further oxidized with [bis(trifluoroacetoxy)iodo]benzene to give stable benziporphyrin derivatives. These oxidized benziporphyrins showed strongly diatropic properties by proton NMR spectroscopy where the differences in chemical shifts (Δδ) were >18 ppm in some cases. The selenophene-derived system was further characterized by X-ray crystallography, and these results showed that one of the pyrrole subunits in this crowded structure was tilted by 21° relative to the mean macrocyclic plane. The tripyrrolic system reacted with silver(I) acetate to give the corresponding silver(III) organometallic complex. Regioselective alkylation with methyl or ethyl iodide and potassium carbonate gave diastereomeric mixtures of N-alkyl derivatives, and the N-ethyl substitution products showed highly diastereotopic characteristics.     

CeCl3-mediated addition of acetylenic bis-lithium salts to aldehydes and ketones: An efficient route to bis-substituted alkyne diols

An efficient, chemoselective protocol to access propargylic diols via a CeCl₃-mediated addition reaction is reported. Propargylic alcohols were transformed into the corresponding acetylenic bis-lithium salt intermediates, which react with aldehydes and ketones in the presence of dry CeCl₃ to furnish the corresponding bis-substituted alkyne diols. This protocol does not involve protection-deprotection or transmetallation steps, and allows the use of poorly reactive or highly enolizable substrates.     

Methylenation of carbonyl compounds with ZnCH2Br2TiCl4. Application to gibberellins

A highly active species prepared from ZnCH₂Br₂TiCl₄ reacted instantaneously with aldehydes and ketones to give methylenated products with exceptional selectivity.     

The initiation of polymerization by organoaluminium amides

Two organoaluminium amides have been used to initiate the polymerizations of methyl methacrylate, acetaldehyde and n-butyraldehyde. Methyl methacrylate polymerized through the vinyl function to give amorphous products. The aldehydes reacted through the carbonyl group at low temperatures with high degrees of stereospecificity to give polymers with substantial crystallinity. The molecular weight of the polyacetaldehyde is very high.     

Reactions of arylacetylenic compounds with arenes in the presence of aluminum halides

Conjugated arylacetylenic ketones and aldehydes, propargyl-type alcohols, and arylacetylenes reacted with arenes in the presence of AlBr₃ or AlCl₃ as catalyst to give substituted indenes. 3-Arylpropynoic acids under analogous conditions gave rise to 3,3-diarylindan-1-ones, while the corresponding methyl esters were converted into methyl 3,3-diarylprop-2-enoates. The key intermediates in the transformations of acetylenic ketones and aldehydes and propargyl-type alcohols into indene derivatives are resonance-stabilized propargyl—allenyl cations -C≡ C-C⁺ ? -C⁺=C=C which reacted with one of the resonance structures to give isomeric indenes, depending on the substituent nature.     

Porphyrins with exocyclic rings. Part 23: Synthesis of porphyrins with large exocyclic rings—cyclohexadeca[b]pyrroles and porphyrins therefrom

Knorr-type condensation of cyclododecanone, cyclopentadecanone, and cyclohexadecanone with phenylhydrazones derived from acetoacetate esters in the presence of zinc dust at elevated temperatures gave the corresponding large ring cycloalka[b]pyrroles in excellent yields. A cyclohexadeca[b]pyrrole was reacted with lead tetraacetate to give an acetate derivative, and this condensed with α-unsubstituted pyrroles in the presence of p-toluenesulfonic acid in acetic acid to give a series of related dipyrrolic structures. Hydrogenolysis of the benzyl ester protective groups, followed by ‘2+2’ condensations with dipyrrylmethane dialdehydes, gave unusual cycloalkanoporphyrins with 16-membered exocyclic rings. When an alkyl group is situated next to the carbocyclic ring, proton NMR spectroscopy indicates that the conformational mobility of the carbocyclic unit is severely restricted.     

Glycerin and CeCl3·7H2O: a new and efficient recyclable medium for the synthesis of bis(indolyl)methanes

Glycerin and CeCl₃·7H₂O were successfully used in recyclable catalytic system for the synthesis of several bis(indolyl)methanes in good to excellent yields through the reaction of indoles with aldehydes. The method is applicable to aliphatic and aromatic aldehydes, and the mixture of glycerin and CeCl₃·7H₂O can be reused up to five times without special treatment and with comparable yields.     

A synthesis of optically active α-quaternary α-amino acids and esters by assembling three components, ketones, (R)-chloromethyl p-tolyl sulfoxide, and sodium azide, via sulfinyloxiranes

Treatment of lithium α-sulfinyl carbanion of chloromethyl p-tolyl sulfoxides with ketones at low temperature afforded adducts in almost quantitative yields, which were exposed to t-BuOK to give sulfinyloxiranes in high yields. The sulfinyloxirane was reacted with benzylamine to give α-amino aldehyde, which was oxidized with iodine in methanol to afford α-amino carboxylic ester in moderate yield. The sulfinyloxiranes were treated with sodium azide to afford α-azido aldehydes in good yields. Oxidation with NaClO₂ followed by catalytic hydrogenation of the azido group of the α-azido aldehydes gave α-quaternary α-amino acids in good overall yields. The oxidation of the azido aldehydes with iodine in methanol in the presence of KOH followed by the catalytic hydrogenation resulted in α-quaternary α-amino acid methyl esters in good yields. When these reactions were carried out starting from unsymmetrical ketones and optically pure (R)-chloromethyl p-tolyl sulfoxide, a new method for a synthesis of optically active α-quaternary α-amino acids and esters in good overall yields was realized.     

Oxidation of alcohols by transition metal complexes—iv : The rhodium catalysed synthesis of esters from aldehydes and alcohols

Both RhH(CO)PPh₃)₃ and a catalyst made in _situ from RhCl₃·3H₂O, PPh₃ and Na₂CO₃ catalyse the reaction of a range of aldehydes with simple primary alcohols to give esters together with alcohols formed by reduction of the aldehydes. The proportion of ester can be increased by adding an efficient hydrogen acceptor. The reaction can also be used to produce 5- and 7-membered lactones from aromatic dialdehydes. Propan-2-ol and the _{in situ} catalyst reduce some aromatic aldehydes to the corresponding alcohols without concomitant ester formation.     

CuCl catalyzed oxidation of aldehydes to carboxylic acids with aqueous tert-butyl hydroperoxide under mild conditions

Oxidation of aldehydes to the corresponding carboxylic acids can be performed highly efficiently at room temperature with 70% tert-butyl hydroperoxide (in water) in the presence of a catalytic amount of easily available ligand free CuCl in acetonitrile as solvent under very mild conditions. This oxidation protocol works well for various aldehydes including aliphatic aldehydes and aliphatic dialdehydes.     

Preparation of trifluoromethylated ynamines and their reactions with some electrophilic reagents

N,N-Dialkyl(3,3,3-trifluoro-1-propynyl)amines were prepared by a three-step procedure starting from commercially available 2,2,3,3,3-pentafluoropropanol. The reactions of these trifluoromethylated ynamines with some electrophiles, such as aldehydes, halogens or N-halosuccinimides (NXS), were investigated. The fluorinated ynamines reacted with aldehydes in the presence of a catalytic amount of Lewis acid to provide the corresponding α-(trifluoromethyl)-α,β-unsaturated amides in good to excellent yields with high Z-stereoselectivity. These ynamines reacted with molecular bomine to give, after treatment with sodium hydrogen carbonate, N,N-dialkyl-2-bromo-3,3,3-trifluoropropanamides in good yields. The reaction with an equimolecular amount of NXS in aqueous acetonitrile also gave the corresponding 2-halo-3,3,3-trifluoropropanamides in good to excellent yields. On the other hand, the reaction of the ynamine with NXS in anhydrous acetonitrile led to the formation of the addition products in high yields. Upon treating the addition products with an equimolecular amount of NX′S in aqueous acetonitrile, the corresponding 2,2-dihalo(X,X′)-3,3,3-trifluoropropanamides were produced in nearly quantitative yields.     

Construction of Extended and Polymeric 1,3-Dithiolane and Tetrathiafulvalene Derivatives using Cycloaddition of Bun 3P.CS2

Abstract

Cycloaddition of the adduct between Buⁿ ₃P and CS₂ to strained double bonds such as in norbornene gives novel zwitterionic products such as 5. This dissociates to the ylide 4 so that carrying out the reaction in the presence of an aldehyde leads to a Wittig reaction to give 2-alkylidene-1,3-dithiolanes. The compound 5 reacts with acetylenic dipolarophiles by cycloaddition accompanied by loss of Buⁿ ₃P to give dihydro-TTF derivatives. Both these reaction types also occur for norbornadiene and by using this together with dialdehydes or diacetylenes a range of new sulfur-rich extended and polymeric structures have been obtained.     

Transition‐Metal‐Free Coupling Reaction of Vinylcyclopropanes with Aldehydes Catalyzed by Tin Hydride

Donor–acceptor cyclopropanes are useful building blocks for catalytic cycloaddition reactions with a range of electrophiles to give various cyclic products. In contrast, relatively few methods are available for the synthesis of homoallylic alcohols through coupling of vinylcyclopropanes (VCPs) with aldehydes, even with transition‐metal catalysts. Here, we report that the hydrostannation of vinylcyclopropanes (VCPs) was effectively promoted by dibutyliodotin hydride (Bu₂SnIH). The resultant allylic tin compounds reacted easily with aldehydes. Furthermore, the use of Bu₂SnIH was effectively catalytic in the presence of hydrosilane as a hydride source, which established a coupling reaction of VCPs with aldehydes for the synthesis of homoallylic alcohols without the use of transition‐metal catalysts. In contrast to conventional catalytic reactions of VCPs, the presented method allowed the use of several VCPs in addition to conventional donor–acceptor cyclopropanes.