Studies in dipyridyl chemistry. VII. Sulfur trioxide sulfonation of γ,γ′-dipyridyl

Reaction of ,-dipyridyl with sulfur trioxide at room temperature gives ,-dipyridyld'isulfotrioxide, which latter on heating at 200° gives ,-dipyridyl-sulfonic acid. Salts of ,-dipyridyl-3-sulfonic acid are prepared, among them the potassium, sodium, barium, and 3-cyano-,-dipyridyl salts.For Part VI see [1].     

Formic acid decomposition on polycrystalline tungsten

The rates of HCOOH decomposition on polycrystalline tungsten are examined over a wide range of catalyst temperatures (600

HCOOH (600     

Soluble polysaccharides of Rhodotorula flava

Conclusions 1. Xanthalin has been shown to have the structure of 2, 2-dimethyl-3, 4,-diangeloyloxy-3, 4-dihydropyrano-5, 6:6, 7-coumarin on the basis of the preparation of a number of derivatives and cleavage products.2. The following products of the alkaline hydrolysis of xanthalin have been isolated and characterized for the first time: (±)-3, 4-dihydroxy-3, 4-dihydroxanthyletin (isokhellactone), C₁₄H₁₄O₅, with mp 213–215° C and (–)-trans-3-hydroxy-4-methoxy-3, 4-dihydroxanthyletin (isomethylkhellactone, C₁₅H₁₆O₅, with mp 136.5–138° C and [] _D ²⁰ –47.7 (ethanol).Khimiya Prirodnykh Soedinenii, Vol. 6, No. 1, pp. 14–19, 1970     

Nitration,amination, and halogenation of Di-O-methylphloracetophenone

Chlorination of the title compound gave 5- and 3-chloro-2-hydroxy-4,6-dimethoxyacetophenone. The nitration of its acetate, followed successively by reduction, diazotization, and reaction with cuprous chloride, gave the 3-substituted series, 2-acetoxy-4,6-dimethoxy-3-nitroacetophenone, 3-amino-2-hydroxy-4,6-dimethoxyacetophenone, and 3-chloro-2-hydroxy-4,6-methoxyacetophenone, respectively. The orientation of substituents in the products was proved. The amino and chloro members of the isomeric 5-substituted series were availablevia 2-hydroxy-4,6-dimethoxy-5-phenylazoacetophenone, the product of the reaction of the title compound with benzenediazonium chloride.

---

Nitrierung, Aminierung und Halogenierung von Di-O-methylphloracetophenon

Zusammenfassung Chlorierung der Titelverbindung gab 5- und 3-Chlor-2-hydroxy-4,6-dimethoxyacetophenon. Die Nitrierung des Acetats, gefolgt von Reduktion, Diazotierung und Reaktion mit CuCl ergab die 3-substituierte Reihe: 2-Acetoxy-4,6-dimethoxy-3-nitroacetophenon, 3-Amino-2-hydroxy-4,6-dimethoxyacetophenon und 3-Chlor-2-hydroxy-4,6-dimethoxyacetophenon. Die Orientierung der Substituenten wird diskutiert. Die Amino- und Chlorderivate der isomeren 5-substituierten Reihe sind über 2-Hydroxy-4,6-dimethoxy-5-phenylacetophenon zugängig, dem Produkt der Reaktion der Titelverbindung mit Phenyldiazoniumchlorid.

     

Oxidative coupling of carbazole derivatives to dicarbazyls in the presence of Pd(OAc)2

The interaction of 9-R-carbazoles (R=H, Me, Et) with Pd(OAc)₂ in AcOH solution was used to obtain the corresponding derivatives of 3, 3-dicarbazyls, the yield of the coupling products being 30–58% based on Pd(OAc)₂. Under similar conditions poly(9-vinylcarbazole) gives 8.6% of intermolecular coupling products.

---

9-R- (R=H, Me, Et) c Pd(OAc)₂ AcOH - 3,3- 30–58% Pd(OAc)₂. -9-- 8,6% - .

     

New cardenolides from the leaves ofGomphocarpus fruticosus

Two new glycosides, gomphotin (1) and gomphotoxin (13), and also the known gomphoside (9) have been isolated from the leaves ofGomophocarpus fruticosus. Compounds (1) and (9) contain a 4,6-dideoxyhexosulose residue as the sugar component, and (13) a 6-deoxyhexosulose, which are attached to glycolic OH groups of the aglycons by 3-O-1,2-O-2 (9, 13) and 3-O-1,4-O-2 (1) acetal-ketal bonds. The structures of the new compounds are represented by the names (3-O-1,4-O-2)-(2,3-dihydroxy-4, 6dideoxyhexulosido)-14-hydroxy-5-card-20(22)-enolide* (1) and (3-O-1,2-O-2)-(2,3,4-trihydroxy-6-deoxyhexulosido)-14-hydroxy-5-card-20(22)-enolide* (13).State Scientific Center for Drugs of the Ministry of Health and the National Academy of Sciences of the Ukraine, Kharkov, fax 441118. Translated from Khimiya Prirodnykh Soedinenii, No. 6, pp. 824–832, November–December, 1995. Original article submitted May 22, 1995.     

Convenient synthesis of 5′-methyl-2′-desoxyuridines

A convenient method has been developed for the synthesis of 5-methyl-2-desoxyuridines. Chlorination of 5-O-benzoyl-5-methyluridines with a mixture of Ph₃P and CCl₄ in DMF affords the 2-desoxy-2-chloro-derivatives, which are then reduced with tributyltin hydride. The crystalline 5-O-benzoyl-5-methyl-2-desoxyuridines were obtained in overall yields of 40–60%. In a similar way, 5-O-benzoyluridine has given 5-O-benzoyl-2-desoxyuridine.Translated from Khimiya Geterotsiklicheskikh Soedinenii, No. 2, pp. 246–248, February, 1989.     

Studies of 2,3′-biquinolyl. 6. Regioselectivity of nucleophilic addition of organometallic compounds to 1-aklyl-3-(2-quinolyl)quinolinium halides

Nucleophilic addition of organometallic lithium and magnesium compounds to 1-alkyl-3-(2-quinolyl)quinolinium cations produces a mixture of the corresponding 1-alkyl-2-R-1,2-dihydro-2,3-biquinolyls and 1-alkyl-4-R-1,4-dihydro-2,3-biquinolyls. The portion of the latter decreases with increasing hardness of the organometallic compound.For No. 5, see [1].Stavropol State University, Stavropol'355009, Russian Russian Chemical Technology University Moscow 125190 Translated from Khimiya Geterotsiklicheskikh Soedinenii, No. 7, pp. 919–923, July, 1999.     

The autocatalytic character of the reaction methanol to hydrocarbons over amorphous silica-alumina catalysts

Conversion of methanol to hydrocarbons was studied on an amorphous silica-alumina over the 330–420°C temperature range and contact times up to 8 h. The reaction was confirmed as autocatalytic from the results of varying both contact time and temperature.

---

330–420°C 8 . , , , .

     

Synthese einiger biologisch interessanter 4′-Azaflavonoide

Zusammenfassung Verschiedene, brom-, chlor-, dichlor-, brommethoxy- und phenylsubstituierte 2-Hydroxy-4-azachalkone wurden durch basenkatalysierte Kondensation geeigneter o-Hydroxy-acetophenone mit Pyridin-4-aldehyd hergestellt und in die entsprechenden 4-Azaflavone, 4-Azaflavonole und 4-Azaflavanone umgewandelt.

---

Several bromo-, chloro-, dichloro-, bromomethoxy- and phenylsubstituted 2-hydroxy-4-azachalcones have been prepared by base catalyzed condensation of the appropriate o-hydroxyacetophenones with 4-pyridinealdehyde, and subsequently converted into the corresponding 4-azaflavones, 4-azaflavonols and 4-azaflavanones.

     

TG-DSC as a new method of investigation of polymers and resins

The introduction of the simultaneous TG-DSC method using only one sample permits a new approach to the characterization of polymeric materials. The correlation between the data obtained from the TG and DSC curves is made easier and is no longer affected by the inhomogeneity of the material.In the case of polyethylene, a first heating under inert gas up to 560 C allows measurement of the temperature and the heat of melting by DSC and the decomposition of polyethylene simultaneously via the TG and DSC curves. If oxygen is introduced above 560 C, the oxidation of carbon black is detected by TG and DSC. For the investigation of resins and especially preimpregnated compounds, this TG-DSC method permits accurate measurement of the reticulation of the prepreg sample and the amount of resin on the support. With only one run on the same sample, the TG-DSC method yields many reliable data.

---

Zusammenfassung Mit der Einführung der simultanen TG-DSC-Methode wird unter Verwendung nur einer Probe eine neue Verfahrensweise zur Untersuchung von Polymeren möglich. Die Korrelation der TG- und DSC-Kurven wird vereinfacht und bleibt unbeeinflusst von der Inhomogenität des Materials.Beim Polyethylen erlaubt ein anfängliches Heizen unter Inertgas bis 560 C eine Messung der Schmelztemperatur und -wärme mittels DSC sowie die Untersuchung der Zersetzung des Polymeren gleichzeitig mittels TG und DSC-Kurven. Wird oberhalb 560 C in Sauerstoff gearbeitet, dann kann die Oxidation von Russ ebenfalls durch TG und DSC verfolgt werden.Bei der Untersuchung von Harzen und imprägnierten Verbundwerkstoffen bietet die TG-DSC eine Möglichkeit, die Vernetzung des Vorprodukts genau zu messen und den Harzgehalt zu bestimmen. Mit nur einem TG-DSC-Versuch an einer Probe können zahlreiche Ergebnisse zuverlässig erhalten werden.

---

. . , , 560, , — . 560, . , , , . , .

     

Effect of electronic interaction between metal and support, II. TPD, TPR and chemisorption studies on Ru/Al2O3?MgO catalysts

TPD, TPR and chemisorption were used to characterize Ru/Al₂O₃–MgO catalysts. It is suggested that the acidity of support may influence the properties of catalysts significantly.

---

, Ru/Al₂O₃–MgO. , .

     

9-(2′,5′-Dimethyl-4′-pyridyl)fluorene in syntheses of fluorospirodihydrofuropyridine and pyridofluoranthene

1,2,5-Trimethyl-4-(9-fluorenylidene)piperidine, which is formed by condensation of fluorene with 1,2,5-trimethyl-4-piperidone, is converted catalytically to 9(2,5-dimethyl-4-pyridyl)fluorene, from which 2-methylpyrido[4,5-a]fluoranthene and its demethylated analog were obtained by catalytic dehydrocyclization. Oxidation of 9-(2,5-dimethy1-4-pyridyl)fluorene gave 9-(2,5-dimethyl-4-pyridyl)9-fluorenol and fluorene-9-spiro-4-(6-oxo-2-carboxypyrido[4,5-c]-4-6-dihydrofuran). 6-Methyl-2-phenyl-7-(9-fluorenyl)indolizine was synthesized by the Chichibabin method.Translated from Khimiya Geterotsiklicheskikh Soedinenii, No. 8, pp. 1087–1090, August, 1978.     

1,2-bis(2',6'-dimethyl-i',3'-dioxa-6'-aza-2'-silacyclooctyl-2')ethane and the corresponding ethylene and acetylene derivatives

Conclusions The reaction of 1,2-bis(methyldimethoxysilyl)ethane and the corresponding ethylene and acetylene derivatives with bis(2-hydroxyethyl)methylamine gives 1,2-bis(2,6-dimethyl-1,3-dioxa-6-aza-2-silacyclooctyl-2)ethane and the corresponding ethylene and acetylene derivatives. Analogously, 1,2-bis(vinyldimethoxysilyl)acetylene gave 1,2-bis(2-vinyl-6-methyl-1,3-dioxa-6-aza-2-silacyclooctyl-2)acetylene.Translated from Izvestiya Akademii Nauk SSSR, Seriya Khimicheskaya, No. 6, pp. 1420–1421, June, 1988.     

n-Pentane isomerization in a continuous-flow reactor on Pt/Al2O3 catalysts modified by adsorbed bismuth and palladium

Isomerization of n-pentane has been studied in a continuous-flow reactor at atmospheric pressure on Pt/Al₂O₃ catalysts modified by adsorbed bismuth and palladium. Lower activity and higher selectivity have been obtained on a catalyst modified by bismuth. Both activity and selectivity have decreased on a catalyst modified by palladium. After oxygen treatment the Pd–Pt/Al₂O₃ catalyst showed the most pronounced change in catalytic properties and its stability was lower than that of the unmodified Pt/Al₂O₃ catalyst.

---

- , Pt/Al₂O₃, . , . , , . Pd–Pt/Al₂O₃ , Pt/Al₂O₃.

     

Investigations in the region of 2,3′-biquinoline. 3. Synthesis of 2′-alkyl(aryl)-1′,2′-dihydro-2,3′-biquinolines and 2′-alkyl(aryl)-2,3′-biquinolines

A method was developed for the synthesis of 2-alkyl(aryl)-1,2-dihydro-2,3-biquinolines, based on the addition of organolithium compounds to 2,3-biquinoline in the presence of tetramethylethylenediamine. Their oxidation with manganese dioxide led to 2-alkyl(aryl)-2,3-biquinolines.For Communication 2, see [1].Stavropol State University, Stavropol 355009, Russia. Russian Chemical-Technology University, Moscow 125190. Translated from Khimiya Geterotsiklicheskikh Soedinenii, No. 3, pp. 350–354, March, 1998.     

Determination of the absolute configuration of carbohydrate components of flavonol glycosides of the chestnut

Conclusions On the basis of the rates of their acid hydrolysis, their optical activities, and their IR spectra, it has been established that the glycosides ofAesculus hippocastanum L. are (SK-1) 3--L-arabofuranosyloxy-5,7,4-trihydroxyflavone, (SK-2) 3--L-rhamnofuranosyloxy-5,7,4-trihydroxyflavone, (SK-3) 3--L-arabofuranosyloxy-5,7,3,4-tetrahydroxyflavone, and (SK-4) 3--L-rhamnofuranosyloxy-5,7,3,4-tetrahydroxyflavone.The glycoside SK-3 is identical with avicularin isolated from the leaves ofPsidium quajava [5]. The complete structures of the other three glycosides have been established for the first time.Khimiya Prirodnykh Soedinenii, Vol. 5, No. 1, pp. 5–7, 1969     

Investigations in the region of 2,3′-biquinolyl 5. Investigation of the reaction of stabilized C-nucleophiles with 1-alkyl-3-(2-quinolyl)-quinolinium halides

The regioselectivity of the nucleophilic addition of stabilized C-nucleophiles to 1-alkyl-3-(2-quinolyl)quinolinium halides was investigated. The reaction of the latter with enolates, indolesodium, and cyanide ion leads to 4-substituted 1-alkyl-1, 4-dihydro-2,3-biquinolyls.For communication 4, see [1].Stravropol State University, Stavropol 355009, Russia. Russian Chemical Technology University 125190, Moscow. Translated from Khimiya Geterotsiklicheskikh Soedinenii, No. 9, pp. 1218–1222, September, 1998.     

The effect of sample geometry on the melting point of polyethylene

We have examined the influence which sample geometry has on the melting point of isothermally melt crystallized polyethylene. The peak positions of curves obtained using a Perkin-Elmer DSC were used as the apparent melting points (Tm). With a constant sample weight (ca. 0.05 mg), we observed an increase of 1.7 K for Tm when the sample thickness was increased from 1 to 8 m. Experiments which demonstrate the heat transfer problems related to the melting of polymer samples are also presented. This work indicates that, if one is attempting to reduce the heating rate dependence of polymer samples, reduction of sample weight alone is not suffiicient. Rather one should aim at increasing the sample pan contact area and reducing the sample thickness simultaneously.

---

Zusammenfassung Der Einfluß der Probengeometrie auf den Schmelzpunkt isotherm geschmolzenen kristallinen Polyäthylens wurde untersucht. Die Peakpositionen in den mit einem Perkin-Eimer DSC erhaltenen Diagrammen wurden als scheinbare Schmelzpunkte (Tm) benutzt. Bei konstantem Probengewicht (etwa 0.05 mg) wurde für Im ein Anstieg um 1.7 K beobachtet, wenn die Schichtdicke der Probe von 1 auf 8 m erhöht wurde. An Experimenten werden auch die mit dem Schmelzvorgang bei Polymerproben zusammenhängenden Wärmeübergangsprobleme aufgezeigt. Diese Arbeit macht deutlich, daß eine Verminderung des Probengewichts allein zur Verminderung der Aufheizgeschwindigkeitsabhängigkeit der Polymerproben nicht ausreichend ist. Es soll vielmehr eine gleichzeitige Vergrößerung der Probenträgerkontaktfläche und Verringerung der Probenschichtdicke angestrebt werden.

---

. , ( -), . ( 0.05 ), 1 8 , . 1.7 , , . , , . .

---

---

The authors gratefully acknowledge the support of the National Science Foundation (Polymers Division) Grant No. DMR 78-25233.