Influence of Interfacial Enantiomeric Grafting on Melt Rheology and Crystallization of Polylactide/Cellulose Nanocrystals Composites

Incorporating the surface-grafted cellulose nanocrystals(CNCs)with enantiomeric polylactide(PLLA or PDLA)is an effective and sustainable way to modify PLLA,but their difference in promoting matrix crystallization is still unrevealed.In this study,the CNCs with identical content and length of PLLA and PDLA(CNC-g-L and CNC-g-D)were prepared and blended with PLLA.The rheological properties of PLLA/CNC-gD are greatly improved,indicating that the stereocomplexation can significantly improve the interfacial strength as compared with the conventional van der Waals force in PLLA/CNC-g-L.Surprisingly,the matrix crystallizes at a higher rate in PLLA/CNC-g-L than PLLA/CNC-g-D.PLLA/CNC-g-L15 reaches its half crystallinity in 8.26 min while a longer period of 13.41 min is required for PLLA/CNC-g-D15.POM observation reveals that the superior crystallization behavior in PLLA/CNC-g-L is originated from its higher nucleation efficiency and faster growth rate.The formation of low content of sc-PLA at the interface can restrict the diffusion of PLLA but contribute less to generate crystalline nuclei,which synergistically leads to the retarded crystallization kinetics in PLLA/CNC-g-D.Revealing the mechanism of different interfacial enantiomeric grafting on the melt rheology and crystallization of PLLA is of great significance for the development of high-performance polylactide materials.     

KINETICS OF MESOPHASE FORMATION OF A LYOTROPIC AROMATIC POLYAMIDE

The kinetics of mesophase formation of a lyotropic aromatic polyamide from isotropic state has been studied by means of depolarized light intensity. Avrami type analysis of the data gives an exponent close to 1, which suggests the nucleation followed by one-dimensional growth. No influence of blending flexible chain from nylon 6 to the aromatic polyamide on the kinetics of mesophase formation was observed.     

Morphology and Crystalline Structure of Inclusion Compounds Formed between Poly（ethylene glycol） and Urea

The poly（ethylene glycol） （PEG, with Mw 2000）-urea inclusion compound （IC） crystallized at high temperature region showed two typical orientations, flat-on and edge-on crystals. 2D-XRD and polarized FTIR spectroscopy revealed that the PEG chains within urea channels were perpendicular to the substrate in fiat-on oriented crystals, while PEG chain axes were parallel to the substrate and lay along the growth direction in the edge-on crystals. FT1R absorption bands of PEG in the ICs are sensitive to orientation of the crystals. A scheme of PEG chain packing in the urea IC channel was proposed, which could explain the orientation of the crystal nucleus causing the two types of morphologies. Furthermore, functioning of PEG2000 chain end with analine had significantly influence on the morphology and orientation of the inclusion compound crystals, due to the defects caused by large terminal groups included in the urea channel.     

STUDIES ON THE KINETICS OF PHASE TRANSITIONS OF A MAIN CHAIN THERMOTROPIC POLYESTER

The kinetics of phase transitions including a transition between mesophases were studied for a main-chain thermotropic polyester by means of DSC and depolarizing transmittance techniques. The isothermal process of these transitions was found to be described by the Avrami equation to high conversions. The Avrami exponents n are about 2,4, 5.3 and 2.2 for liquid crystallization, transition between mesophases and crystallization from mesophase respectively. The liquid crystallization from isotropic liquid phase occurs at very low undercoolings with high transformation rate. This behavior is explained as the results of the smaller value of the surface free energy for mesophase than that for crystallites which is evidenced by the very weak temperature dependence of liquid crystallization rate.     

KINETICSOF TRANSITION FROM ISOTROPIC TO CHOLESTERIC PHASE FOR A THERMOTROPIC CELLULOSE DERIVATIVE

The kinetics of mesophase formation of a thermotropic hydroxyethyl cellulose acetatefrom isotropic phase to cholesteric mesophase has been studied by means of depolariz-ing transmittance method. Avrami type analysis of the data gives an exponent n close to1, which suggests the nucleation followed by rod-like growth. It means that the kineticbehavior of phase transition from isotropic to cholesteric mesophase is very similar to thatof the mesophase formation from isotropic to nematic mesophase.     

Greatly enhanced hydrolytic degradation ability of poly(L-lactide) achieved by adding poly(ethylene glycol)

Plasticized poly(L-lactide)(PLLA) materials have been applied in many fields and the microstructure performance of such materials attracts much attention of researchers. However, few reports declared the hydrolytic degradation ability of the plasticized PLLA materials. In this article, a small quantity of poly(ethylene glycol)(PEG) was introduced into PLLA, which aimed to understand the hydrolytic degradation behavior of the plasticized PLLA materials. The microstructures of the plasticized samples were comparatively investigated using scanning electron microscopy(SEM), wide angle X-ray diffraction(WAXD), differential scanning calorimetry(DSC) and Flourier transform infrared spectroscopy(FTIR), etc. The results demonstrated that PEG improved the hydrophilicity of sample surface, and the relatively high content of PEG enhanced the crystallization ability of PLLA matrix. The hydrolytic degradation measurement was carried out at 60 ℃ in an alkaline solution of pH = 12. The results demonstrated that the plasticized PLLA samples exhibited accelerated hydrolytic degradation compared with the pure PLLA sample, and the hydrolytic degradation was also dependent on the PEG content. Further results demonstrated that PEG induced the change of hydrolytic degradation mechanism possibly due to the good dissolution ability of PEG in water, which provided more paths for the penetration of water. Furthermore, the microstructure evolution of the plasticized PLLA during the hydrolytic degradation process was also investigated, and the results demonstrated the occurrence of PLLA crystallization, which was possibly contributed to the decreased hydrolytic degradation rate observed at relatively long hydrolytic degradation time. This work is of great significance and may open a new way for promoting the reclamation of PLLA waste material.     

Effects of molecular weight on the crystallization and melting behaviors of poly(L-lactide)

In this study, a series of monodispersed poly(L-lactide)(PLLA) were synthesized by the ring-opening polymerization with Schiff base aluminum catalyst, and the effects of the number-average molecular weight(Mn) on the crystallization and melting behaviors of PLLA were investigated by differential scanning calorimetry(DSC) and wide-angle X-ray diffraction(WAXD). The total crystallization rate of PLLA was Mn-dependent, which reached the maximum value for PLLA with Mn of 18.6 kg/mol. In addition, when Mn of PLLA was 18.6 kg/mol, the melting enthalpy(ΔHm) showed a maximum value(87.1 J/g), which was the highest reported value till now. The critical temperature for change of crystal formation from ?-form to ?-form crystals increased in the isothermal crystallization process with Mn increasing. In the reheating procedure, high-Mn PLLA demonstrated a small exothermal peak prior to the dominant melting peak, corresponding to crystal transition from ?- to ?-form, but low-Mn PLLA didn't show the peak of crystal transition. These different crystallization and melting behaviors were attributed to the different chain mobility of PLLA with different Mn.     

Two-dimensional correlation analysis of continuous online in situ ATR-FTIR on the adsorption of butyl xanthate at the surface of a-PbO

The adsorption behavior of butyl xanthate on the surface of lead oxide was investigated using continuous online in situ attenuated total reflectance Fourier transform infrared（ATR-FTIR） spectroscopy technique and two dimensional（2D） correlation analysis.The adsorbed layer studied was prepared by coating α-PbO particles onto the surfaces of the ZnSe crystal.The appearance of spectral peaks at 1203 cm^-1,1033 cm^-1 and their red shift indicated the formation and aggregation of xanthate at the surface of α-PbO.According to 1R intensity changes after rinsing with deionized water and a NaOH solution,the adsorption was proved to be a chemisorption type.The competition between xanthate and OH for the surfaces leads to desorption of xanthate at higher pH.The technique of 2D correlation ATR-FTIR spectroscopy was used to evaluate the changing order of spectral intensities in the adsorption process,and the results indicated that xanthate micelles were formed at the surfaces.The adsorption kinetics of butyl xanthate was found to be a pseudo-second-order reaction model and the adsorption capacity of butyl xanthate at α-PbO was as high as 281 mg g^-1 after 150 min.     

A convenient,highly-efficient method for preparation of hydroxyl-terminated isotactic poly(propylene) and functional di-block copolymer

Both terminated functional isotactic polypropylene （iPP） and block copolymers containing iPP segment are desirable for commercial applications. This paper provides a convenient, highly-efficient method to prepare hydroxyl-terminated isotactic polypropylene （iPP-t-OH） and functional di-block copolymer containing the iPP segment through a combination of coordination polymerization and coupling reaction. The coordination polymerization was catalyzed by TiCI4/MgCI2/AIEt3 catalyst system using ZnEt2 as chain transfer agent. Further, the Zn-terminated iPP was oxidized and subsequently hydrolyzed to provide iPP-t-OH. Soxhlet extraction and 13C NMR were used to calculate the isotacticity of iPP-t-OH. The degree of polymerization and the number of hydroxyl groups at the chain end of iPP-t-OH were measured by GPC and 1H NMR. Despite the high molecular weight and heterogeneous reaction, iPP-t-OH is effectively linked with PEG-t-NCO to produce di-block copolymers. DSC analysis of the di-block copolymer shows an obvious decrease in Tm and To, which indicated that PEG was successfully linked to the terminal end of iPP.     

Effect of molecular weight of PEG soft segments on photo-stimulated self-healing performance of coumarin functionalized polyurethanes

Polyurethanes consisting of tri-functional homopolymer of hexamethylene diisocyanate （tri-HDI） and polyethylene glycol （PEG） are synthesized, in which photo-reversible coumarin moieties act as pendant groups. Accordingly, the polyurethanes can be repeatedly self-healed under UV lights at room temperature by taking advantages of the photodimerization and photocleavage habits of coumarin. Molecular weight of the soft segment, PEG, is found to be closely related to the healing performance of the polyurethanes. Lower molecular weight PEG that corresponds to higher initial coumarin concentration in the polymer is critical for obtaining higher healing efficiency in the case of the first healing action. Nevertheless, it does not guarantee high reversibility of the photo-remendability during the repeated healing events. In contrast, the polyurethane with moderate molecular weight PEG has achieved balanced performance. Reaction kinetics is less important for the healing effect.     

Isothermal crystallization kinetics and melting behavior of PLLA/f-MWNTs composites

Poly(l-lactide) (PLLA) and functionalized multi-walled carbon nanotubes (f-MWNTs) were used to prepare PLLA/f-MWNTs composites via solution blending. The structure and morphology of f-MWNTs were characterized using FT-IR and SEM. The spherulitic morphologies, isothermal crystallization kinetics, and melting behavior of the resulting PLLA/f-MWNTs composites were investigated by POM and DSC, respectively. Both Avrami and Lauritzen–Hoffman kinetics models are used to quantitatively evaluate the crystallization half-time t _1/2, the nucleation constant K _g, and the work of chain folding q of PLLA and its composites. Temperature modulated DSC was used to investigate the mechanism of overlapped endothermic and exothermic peaks of PLLA/f-MWNTs composites. The results indicated that the SiO₂ coating on the MWNTs could react with coupling agent KH-550 leading to the formation of f-MWNTs, which can be evenly dispersed in PLLA matrix. A decrease of spherulite size and an increase of crystallization rate were observed from POM measurements for PLLA/f-MWNTs. The multiple melting behavior can be attributed to the melt-recrystallization process of PLLA/f-MWNTs composites at certain temperature.     

Confined crystallization,melting behavior and morphology in PEG-b-PLA diblock copolymers: Amorphous versus crystalline PLA

In diblock copolymers, the constraining effects of different stereochemical structure of high-T_m block on crystallization and melting behaviors of other constituent are supposed to be different. In this work, PEG-b-PDLLA and PEG-b-PLLA were synthesized, and crystallization kinetics, crystalline structure, melting behaviors of PEG blocks and morphology development in these systems were evaluated. Compared to those connected to PLLA, PEG-b-PDLLA exhibited lower crystallization rates, implying that connectivity of amorphous chain exerted more pronounced effect on crystallization rate of PEG than that of steric hindrance of PLLA crystallites. While all PEG-b-PDLLA samples showed a single endothermic peak during heating process, multiple melting peaks were observed in PEG-b-PLLA associated with composition, crystallization temperature and cooling rate of PLLA. A lamellar structure was formed by the crystallization of PEG in all PEG-b-PDLLA, however, when PEG-b-PLLA crystallized at room temperature directly, unexpected results occurred: lamellar for diblock copolymers with 31.5 and 48.0 wt% PLA or cylindrical structure for the diblock copolymers with 56.1 and 63.8 wt% PLA. Depending on composition, PEG-b-PLLA created one or two types of lamellar stacks after sequential crystallization of PLLA and PEG. © 2020 Wiley Periodicals, Inc. J. Polym. Sci. 2020 , 58, 455–465     

Macromolecular Organization of Poly(L‐lactide)‐block‐Polyoxyethylene into Bio‐Inspired Nano‐Architectures

Block copolymers create various types of nano‐structures, e. g., spheres, rods, cubes, and lamellae. This review discloses the dynamic macromolecular organization of block copolymers comprising poly(L ‐lactide) (PLLA) and poly(oxyethylene) (PEG) that allows to simulate elaborate biological systems. The block copolymers, AB‐ (PLLA‐PEG) and ABA‐type (PLLA‐PEG‐PLLA), are synthesized by ordinary lactide polymerization to have a controlled block length. They are dispersed into an aqueous medium to prepare nano‐scale particles, consisting of hydrophobic PLLA and hydrophilic PEG in the core and shell, respectively. Then, the particles are placed on a flat substrate by the casting method. The particles are detected as discoids by AFM, having shrunk with loss of water. Heat‐treatment of these particles at 60°C (above T_g of PLLA) gives rise to a collapse into small fragments, which then aggregate into bands with nano‐size width and thickness. The PLLA‐PEG bands align parallel to each other, while the PLLA‐PEG‐PLLA bands form a characteristic network resembling the neuron system created in animal tissue. As analyzed by TEM diffraction, each is composed of α‐crystal of PLLA whose c‐axis (molecular axis) is perpendicular to the substrate surface. Based on this fact, a doubly twisted chain structure of PLLA is proposed in addition to a plausible mechanism for the self‐organization of the block copolymers. Derivatives of the PLLA‐PEG block copolymers can form far more interesting nano‐architectures. An equimolar mixture of enantiomeric copolymers, PLLA‐PEG‐PLLA and PDLA‐PEG‐PDLA, forms a hydrogel that is thermo‐responsive. The terminal‐modified poly(L ‐lactide)‐block‐polyoxyethylene monocinnamate (PLLA‐PEG‐C) forms a highly stabilized nanofiber by the photo‐reaction of the cinnamates placed in the outer layer of the nanobands.     

Fast Crystallization and Toughening of Poly(<Emphasis Type="Italic">L</Emphasis>-lactic acid) by Incorporating with Poly(ethylene glycol) as a Middle Block Chain

High molecular weight poly(L-lactic acid)-poly(ethylene glycol)-poly(L-lactic acid) (PLLA–PEG–PLLA; PLGL) triblock copolymers with various lengths of the PLLA blocks were synthesized by ringopening polymerization of L-lactide. The amorphous and crystalline PLLA and PLGL films were prepared by hot pressing with different temperature treatments. PLLA and PEG blocks exhibited good miscibility in the amorphous PLGL samples, while phase separation occurred in the crystalline ones. The flexible PEG blocks not only accelerated the crystallization rate of PLLA but also greatly improve its flexibility. The crystallization time of PLGL copolymers shorten to less than 5 min and copolymers showed much better flexibility than neat PLLA, the maximum fracture strain reached about 600% for amorphous sample. The processing time of PLLA was greatly shortened and the brittleness of material was improved.     

Poly(ethylene glycol)–poly(L‐lactide) star block copolymer hydrogels crosslinked by metal–ligand coordination

The aqueous solution behavior and thermoreversible gelation properties of pyridine‐end‐functionalized poly(ethylene glycol)–poly(L ‐lactide) (PEG–(PLLA)₈–py) star block copolymers in the presence of coordinating transition metal ions were studied. In aqueous solutions, the macromonomers self‐assembled into micelles and micellar aggregates at low concentrations and formed physically crosslinked, thermoreversible hydrogels above a critical gel concentration (CGC) of 8% w/v. In the presence of transition metal ions like Cu(II), Co(II), or Mn(II), the aggregate dimensions increased. Above the CGC, the gel–sol transition shifted to higher temperatures due to the formation of additional crosslinks from intermolecular coordination complexes between metal ions and pyridine ligands. Furthermore, as an example, PEG–(PLLA)₈–py hydrogels stabilized by Mn(II)–pyridine coordination complexes were more resistant against degradation/dissolution when placed in phosphate buffered saline at 37 °C when compared with hydrogels prepared in water. Importantly, the stabilizing effect of metal–ligand coordination was noticeable at very low Cu(II) concentrations, which have been reported to be noncytotoxic for fibroblasts in vitro. These novel PEG–(PLLA)₈–py metallo‐hydrogels, which are the first systems to combine metal–ligand coordination with the advantageous properties of PEG–PLLA copolymer hydrogels, are appealing materials that may find use in biomedical as well as environmental applications like the removal of heavy metal ions from waste streams. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

Electrochemical Processes at a Platinum Electrode in CuSO4 Solutions in the UPD Region and at Initial Electrocrystallization Stages: Effect of Polyethylene Glycol

Effect of polyethylene glycol (PEG; m.w. 3000) on the Cu_ad deposition at smooth platinum in 0.5 M H₂SO₄ + 0.1 M CuSO₄ solutions and on the initial copper electrocrystallization stages is studied. According to cyclic voltammetry, PEG barely affects the Cu_ad formation kinetics. Adding PEG hampers dissolution of deposited copper. As follows from chronoamperograms, PEG makes no impact on the nucleation character (progressing nucleation) but hampers the copper nucleation process.     

Controlled preparation of poly(ethylene glycol) and poly(L‐lactide) block copolymers in the presence of a monomer activator

Polymerization of L ‐lactide (LA) was performed in the presence of trifluoromethanesulfonic acid (CF₃SO₃H) via an activated monomer mechanism to synthesize various block copolymers composed of polyethyleneglycol (PEG) and poly(L ‐lactide) (PLLA). The PLLAs obtained had molecular weights close to theoretical values calculated from LA/PEG molar ratios and exhibited monomodal GPC curves. A ¹H NMR spectroscopic study showed that the LA carbonyl carbon signal exhibited a change in chemical shift to lower field, caused by electron delocalization of the carbonyl carbon by CF₃SO₃H. We successfully prepared PEG and PLLA block copolymers using this activated monomer mechanism. We concluded that synthesis proceeded by LA ring‐opening polymerization caused by PEG in the presence of CF₃SO₃H to yield PEG and PLLA block copolymers. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 5917–5922, 2009     

Self-assembling behavior of binary mixture of hexa-peri-hexabenzocoronene derivatives with different molecular symmetry

The self-assembly and mesophase behavior of a series of mixtures of hexa-peri-hexabenzocoronene (HBC) derivatives carrying alkyl chains of different lengths at different positions and thus of different molecular symmetry (C₁- and D_3h-symmetry) were examined by powder X-ray diffractometry, UV–vis spectrometry, photoluminescence, polarizing optical microscopy, and differential scanning calorimetry. Significant reduction of isotropic phase transition temperature/clearing temperature was observed compare to single component symmetric analogues. The chain length modulates the mesophase behavior existed in the mixture. In particular, with long dodecyl groups, the mixture exhibited excimer/exciplex formation as well as aggregation induced emission phenomena in the non-polar solvent of hexane. Formation dynamics of intermolecular excimer/exciplex was studied by nuclear magnetic resonance and UV–vis spectroscopic method.     

Porous Biodegradable Polyesters, 3. Preparation of Porous Poly(ε‐caprolactone) Films from Blends by Selective Enzymatic Removal of Poly(L‐lactide)

Porous poly(ε‐caprolactone) (PCL) films were prepared by the removal of poly(L ‐lactide) (PLLA) from phase‐separated PLLA/PCL blend films using the selective Proteinase K™‐catalyzed hydrolysis of PLLA and subsequent elution of its water‐soluble oligomers and monomer into the surrounding hydrolysis media. Polarimetry, gravimetry, and differential scanning calorimetry (DSC) confirmed the complete removal of PLLA molecules from the blend films within 5 d of the Proteinase K‐catalyzed hydrolysis and therefore the formation of porous PCL films when the initial PLLA content [X_PLLA(0)(w/w) = PLLA/(PCL + PLLA)] of the blend films was in the range 0.3–0.5. The fragmentation of the blend film with X_PLLA(0) = 0.7 occurred when the Proteinase K‐catalyzed hydrolysis was continued for longer than 5 d. These findings exhibited that both the PLLA‐rich and PCL‐rich phases were continuous in the blend films for X_PLLA(0) ranges of 0.3–0.7 and of 0.3–0.5, respectively, and that the PCL‐rich phase became dispersed when X_PLLA(0) was increased to 0.7. The dependence of enzymatic hydrolysis rate on X_PLLA(0) strongly suggests that the Proteinase K‐catalyzed hydrolysis of the blend films occurs at the interfaces of PLLA‐rich and PCL‐rich phases as well as at the film surfaces.     

Crystallization,rheological, and mechanical properties of PLLA/PEG blend with multiwalled carbon nanotubes

Functionalized multiwalled carbon nanotubes (FMWCNTs) were introduced into poly(L‐lactide)/polyethylene glycol (PLLA/PEG) blend and the effects of FMWCNTs on crystallization behaviors, rheological, and mechanical properties of PLLA/PEG/FMWCNTs were investigated. The results show that FMWCNTs exhibit good distribution in the nanocomposites and absorb some PEG to agglomerate around them. The crystallization behavior of PLLA in the nanocomposites is greatly dependent on the content of FMWCNTs. At low content of FMWCNTs, the addition of FMWCNTs improves the crystallization behavior of PLLA by enhancing the crystallization temperature and accelerating the crystallization rate, whereas at high content of FMWCNTs, the crystallization of PLLA is restricted to a certain degree. Rheological properties show the formation of the network structure of FMWCNTs at high content, which is the main reason for the retarded crystallization behavior of PLLA due to the network structure providing restriction to mobility and diffusion of PLLA chains to crystal growth fronts. The mechanical properties show that FMWCNTs exhibit reinforcement effect for plasticized PLLA. Copyright © 2010 John Wiley & Sons, Ltd.