A New Lithium Hydrogen Tellurate—LiH5TeO6

X-ray structural analysis for lithium pentahydrogen tellurate has been carried out. The substance crystallizes in a tetragonal system in the space group P4₂/n, a=7.6350(6), c=7.5014(9) Å, V=437.28(7) ų, Z=4, and R=0.0189 for 350 observed reflections. The crystal structure consists of isolated TeO₆ octahedra, which are connected by a network of hydrogen bonds. The lithium atoms are surrounded by slightly deformed oxygen octahedra. Infrared and Raman spectra have been studied. The FTIR spectra were recorded down to a temperature of 90 K. Thermal behavior of LiH₅TeO₆ has been studied by the methods of TG, DTA, DTG, and DSC. Conclusions following from the DSC and FTIR measurements exclude the existence of structural phase transitions in the temperature interval from 90 K to the temperature of decomposition of the compound (390 K).     

Thermodynamic properties and thermal stability of the synthetic zinc formate dihydrate

Zinc formate dihydrate has been synthesized and characterized by powder X-ray diffraction, elemental analysis, FTIR spectra and thermal analysis. The molar heat capacity of the coordination compound was measured by a temperature modulated differential scanning calorimetry (TMDSC) over the temperature range from 200 to 330 K for the first time. The thermodynamic parameters such as entropy and enthalpy vs. 298.15 K based on the above molar heat capacity were calculated. The thermal decomposition characteristics of this compound were investigated by thermogravimetric analysis (TG) and differential scanning calorimetry (DSC). TG curve showed that the thermal decomposition occurred in two stages. The first step was the dehydration process of the coordination compound, and the second step corresponded to the decomposition of the anhydrous zinc formate. The apparent activation energy of the dehydration step of the compound was calculated by the Kissinger method using experimental data of TG analysis. There are three sharply endothermic peaks in the temperature range from 300 to 650 K in DSC curve.     

Calorimetric investigation of radiation-thermal synthesized lithium pentaferrite

LiFe₅O₈ solid-phase synthesis at radiation-thermal (RT) annealing of lithium carbonate and iron oxide mechanical mixture was studied using thermal analysis (TG/DSC) and X-ray powder diffraction (XRD) techniques. The RT annealing was proceeded with high-power pulsing beam of 2.4 MeV electrons. It was shown that RT synthesis of the precursors considerably enhances the reactivity of the solid system within temperatures range 600–800 °C. In particular, lithium ferrite can be obtained at lower temperatures than those necessary in the absence of RT annealing.     

Kinetic analysis of complex decomposition reactions using evolved gas analysis

For complex decomposition reactions, traditional methods, such as TG and DSC cannot fully resolve all of the steps in the reaction. Evolved gas analysis (EGA) offers another tool to provide more information about the decomposition mechanism. The decomposition of sodium bicarbonate was studied by TG, DSC and EGA using a simultaneous thermal analysis unit coupled to a FTIR. The decomposition of sodium bicarbonate involves two reaction products H₂O and CO₂, which are not evident from either TG or DSC measurements alone. A comparison of the reaction kinetics from TG, DTG and EGA data were compared.     

Dilatometric study of CaFeO2.5 single crystal

CaFeO_2.5±δ single crystal was obtained after different steps of mechanical and thermal treatment and finally a crystallization in an image furnace. We performed dilatometric tests of this material according to the three crystallographic directions of the network, from ambient to 1,473 K, accompanied by DSC and TG tests. The tests performed on a single crystal CaFeO_2.5 confirmed the transitions already observed by other authors. For the first time, a dilatometric anomaly has been observed at 1,308 K. It has the highest intensity of all the anomalies observed and appears only along the b crystallographic direction reflecting a change of state of CaFeO_2.5 at high temperature. This anomaly was confirmed using DSC and TG analysis. Moreover, this study confirmed the important dilatometric anisotropy of the material.     

Synthesis of lithium ferrite by precursor and combustion methods: A comparative study

The thermal decomposition of lithium hexa(carboxylato)ferrate(III) precursors, (Li₃[Fe(L)₆]·xH₂O, L = formate, acetate, propionate, butyrate), has been carried out in flowing air atmosphere from ambient temperature upto 500 °C. Various physico-chemical techniques, i.e., TG, DTG, DTA, XRD, SEM, IR, Mössbauer spectroscopy, etc., have been employed to characterize the intermediates and end products. After dehydration, the anhydrous complexes undergo decomposition to yield various intermediates, i.e., lithium oxalate/acetate/propionate/butyrate, ferrous oxalate/acetate and α-Fe₂O₃ in the temperature range of 185–240 °C. A subsequent decomposition of these intermediates leads to the formation of nanosized lithium ferrite (LiFeO₂). Ferrites have been obtained at much lower temperature (255–310 °C) as compared to conventional ceramic method. The same nano-ferrite has also been prepared by the combustion method at a comparatively lower temperature (400 °C) and in less time than that of conventional ceramic method.     

Crystallization behavior and morphology of poly(ethylene‐co‐trimethylene terephthalate)s

The melt crystallization behaviors and crystalline structures of poly(ethylene terephthalate) (PET), poly(trimethylene terephthalate), and poly(ethylene‐co‐trimethylene terephthalate) (PETT) were investigated with differential scanning calorimetry (DSC), polarized optical microscopy (POM), and X‐ray diffraction at various crystallization temperatures (T_cs). The PETT copolymers were synthesized via the polycondensation of terephthalate with ethylene glycol and trimethylene glycol (TG) in various compositions. The copolymers with 69.0 mol % or more TG or 31.0 mol % or less TG were crystallizable, but the other copolymers containing 34–56 mol % TG were amorphous. The DSC isothermal results revealed that the addition of a small amount of flexible TG (up to 21 mol %) to the PET structure slightly reduced the formation of three‐dimensional spherulites. A greater TG concentration (91–100%) in the copolyesters changed the crystal growth from two‐dimensional to three‐dimensional. The DSC heating scans after the completion of isothermal crystallization at various T_cs showed three melting endotherms for PET, PETT‐88, PETT‐84, and PETT‐79 and four melting endotherms for PETT‐9 and PETT. The presence of an additional melting endotherm could be attributed to the melting of thinner and imperfect copolyester crystallites. Analyses of the Lauritzen–Hoffman equation demonstrated that PETT‐88 had the highest values of the product of the lateral and folding surface free energies, and this suggested that the addition of small amounts of flexible trimethylene terephthalate segments to PET disturbed chain regularity, thus increasing molecular chain mobility. © 2004 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 42: 4255–4271, 2004     

Dehydration studies of Co(II), Cu(II) and Zn(II) methanesulfonates

The dehydration process of Co(II), Cu(II) and Zn(II) methanesulfonates was studied by thermogravimetry/derivative thermogravimetry (TG/DTG) and differential scanning calorimetry (DSC) techniques in dynamic N₂ atmosphere. The TG/DTG curves show that all of them contain four crystallization water molecules, which are lost in two steps. The peak temperature and dehydration enthalpies ΔH were measured from DSC curves for each compound. The effect of procedural variables on the TG and DSC curves was investigated. In this work, the procedural variables included heating rate, Al pan state (unsealed and sealed) and sample mass.     

Solid state of a new flavonoid derivative DA-6034

DA-6034 is a new synthetic flavonoid known to possess anti-inflammatory activity. The objective of this work was to investigate the existence of polymorphs and pseudopolymorphs of DA-6034. Six crystal forms, one hydrate form and five solvates, of DA-6034 have been isolated by recrystallization and characterized by differential scanning calorimetry (DSC), thermogravimetric analysis (TG), and powder X-ray diffractometry (PXRD). From the DSC and TG data it was confirmed that Form 1 is monohydrate; Form 2 is DMSO solvate; Form 3 is 1/2 DMSO solvate; Form 4 is 1/2 methyl ethyl ketone solvate; Form 5 is 1.5 H₂O, 1/2 acetic acid solvate; Form 6 is 1/2 H₂O, 1/4 butanol solvate. The PXRD patterns of the six crystal forms were different respectively. In the dissolution studies in pH 6.8 ± 0.05 buffer at 37 ± 0.5 °C, the solubility of solvates was higher than that of Form 1.     

Investigation of structural states and oxidation processes in Li0.5Fe2.5O4?δ using TG analysis

Using the methods of X-ray phase and DSC analyses, a correlation is established between ordering/disordering of the structure of lithium pentaferrite (LPF??Li_0.5Fe_2.5O_4???) and its nonstoichiometry with respect to oxygen. Ferrite specimens with a reduced content of oxygen were prepared by thermal annealing in vacuum (P?=?2?×?10^?4?mmHg). It is shown that this treatment results in oxygen nonstoichiometry and causes a transition of LPF into a state with random distribution of cations in the crystal lattice. Using nonisothermal thermogravimetry (TG), the kinetic dependences of oxygen absorption by the anion-deficient LPF are investigated within the temperature interval T?=?(350?C640)?°C in the course of its oxidation annealing in air. The kinetic experiment data are processed with the Netzsch Thermokinetics software. The oxidation rate constants, the effective coefficients, and the activation energy of oxygen diffusion in the material under study are derived. Their values are in a satisfactory agreement with those earlier obtained for the lithium?Ctitanium ferrite ceramic material of the following composition: Li_0.649Fe_1.598Ti_0.5Zn_0.2Mn_0.051O_4???. The effective activation energy of oxygen diffusion in LPF calculated within the temperature interval T?=?(350?C640)?°C is found to be E _d?=?1.88?eV. In its value, it is close to the activation energy of oxygen diffusion along grain-boundaries in the lithium?Ctitanium ferrite ceramic material.     

Kinetic and thermodynamic studies of the nonisothermal decomposition of anhydrous copper(II) formate in different gas atmospheres

The thermal decomposition of anhydrous (orthorhombic) copper(II) formate was studied by programmed rising-temperature methods (TG, DTG, DTA and DSC) to about 250 °C in flowing gas atmospheres of nitrogen (inert), hydrogen (reducing) and air (oxidizing). The degradation reaction, anion breakdown, proceeded to completion in two distinct, but partially overlapping, rate processes and apparent Arrhenius parameters, calculated by the Ozawa nonisothermal kinetic method, agreed satisfactorily with the literature results. It was concluded that the two consecutive processes, contributing to the overall reaction, involved stepwise cation reduction: Cu²⁺→Cu⁺→Cu⁰, with copper(I) formate as intermediate. This mechanism is similar to that proposed in previous studies of the decompositions of copper(II) oxalate, malonate, maleate, fumarate, mellitate and squarate. For all of these reactants, the Cu⁺ salt has been identified as an intermediate, exhibiting a (slightly) lower relative reactivity than the corresponding Cu²⁺ salt. For copper(II) formate the response curves in the three different gaseous atmospheres were generally similar, showing that neither oxidizing nor reducing conditions caused a marked change in reactivity. The temperature of reaction initiation in H₂ was slightly diminished and the temperature of the second stage of reaction in O₂ was raised appreciably. It is believed that electron transfer contributed to the control of reactivity and that the gases present appreciably influence the rates of the contributory reactions occurring.     

Interpretation of partial thermal decomposition mechanism of Dy<Subscript>2</Subscript>(SO<Subscript>4</Subscript>)<Subscript>3</Subscript>·8H<Subscript>2</Subscript>O

Partial dehydration of Dy₂(SO₄)₃·8H₂O was studied employing TG, DSC, D.C. electrical conductivity and spectroscopic techniques. The possible mechanism for the loss of water molecules (partial dehydration) was found to be random nucleation obeying Mapel equation based on TG trace. The DSC traces are supports the results of TG traces and are also utilized to understand the enthalpy changes accompanying the partial dehydration and phase transition accompanying the dehydrated samples. D.C. electrical conductivity studies are attempted to supplement these TG studies. Attempts are made to explain the structural changes accompanying dehydration on the basis of infrared spectra and X-ray diffraction and scanning electron microscopic studies.     

Kinetics of the oxidation of magnetite using simultaneous TG/DSC

Kinetics of the oxidation of magnetite (Fe₃O₄) to hematite (a-Fe₂O₃) are studied in air using simultaneous TG/DSC. The mechanism is complex and the differences between the kinetic conclusions and Arrhenius parameters based on either TG or DSC are discussed. As in our previous work on CaCO₃ [1], the determination of a satisfactory baseline for the DSC results adds considerable uncertainty to those kinetic results. Consequently the calculations based on the TG data are considered superior. Solid state reactivity varies from one source of material to another and the results are compared for two different commercial samples of magnetite, both presumably prepared by wet chemical methods. These materials are much more reactive than the material studied previously [2], which had been coarsened and refined at high temperatures. In that earlier study, the metastable spinel, g-Fe₂O₃, was formed as an intermediate in the oxidation to the final stable form, a-Fe₂O₃. The exothermic reaction of the gamma to alpha form of the product during the oxidation process destroys the direct comparison between the TG and DSC results, since the former only detects the change in mass of the sample and not the crystallographic transformation. The TG results, however, represent the true oxidation process without superposition of the structural aspects. This revised version was published online in July 2006 with corrections to the Cover Date.     

Thermal Behavior of VARIOUS sulfone-based diimid-diacids Solvated with Polar Organic Solvents

Thermal analysis techniques were performed to reveal ‘crystalline solvate’ behavior between organic compounds and polar solvents. Diimide-dicarboxylic acid (DIDA) was formed by reacting 3,3'-diaminodiphenylsulfone (3,3'-DPS) or 4,4'-diaminodiphenylsulfone (4,4'-DPS) with trimellitic anhydride (TMA) in some polar solvents (PSv). The products could crystallize upon cooling in a polar solvent media to form a solvate containing a finite quantity of solvents, leading to what can be termed as ‘crystalline solvates’ (CS). This study has demonstrated that sampling techniques in TG and DSC must be kept to be as similar as possible, which is a critical point in practices of thermal analysis techniques. DSC analysis revealed that there are two endothermic peaks in the CS, with the lower one being the de-solvate temperature of CS (T _d) at which the solvated solvent molecules were removed, and the higher peak being the melting point of the de-solvated DIDA (T _m). T _d was found to vary with the types of polar solvents and structures of DIDA. The TG result indicated that most of the sulfone-based DIDA-CS contained 2 moles of solvent per mole of solvate. X-ray analysis revealed that different crystalline structures were found for DIDA-CS solvated with different solvent molecules, but all de-solvated DIDA possessed the same crystal unit. This revised version was published online in July 2006 with corrections to the Cover Date.     

Thermal analysis of water and magnesium hydroxide content in commercial pharmaceutical suspensions milk of magnesia

A standard protocol was developed to determine the water content by thermal analysis of milk of magnesia (MoM). Differential scanning calorimetry (DSC) and thermogravimetry (TG) were used in a novel manner for examining the physical characteristics of the commercial pharmaceutical suspensions. Moisture analyzer and oven-dry methods validate the proposed protocol. MoM consists primarily of water and magnesium hydroxide [Mg(OH)₂]. Experimental design of the thermal analysis parameters were considered including sample size, flowing atmosphere, sample pan, and heating rate for both DSC and TG. The results established the optimum conditions for minimizing heat and mass transfer effect. Sample sizes used were: (5?C15?mg) for DSC and (30?C50?mg) for TG. DSC analysis used crimped crucibles with a pinhole, which allowed maximum resolution and gave well-defined mass (water) loss. TG analysis used a heating rate of 10?°C/min^?1 in an atmosphere of nitrogen. The heat of crystallization, heat of fusion, and heat of vaporization of unbound water are 334, 334, and 2,257?Jg^?1, respectively (Mitra et al. Proc NATAS Annu Conf Therm Anal Appl 30:203?C208, 2002). The DSC average water content of (MoM) was 80?wt% for name brand and 89.5?wt% for generic brand, based on the relative crystallization, melting and vaporization heats/Jg^?1 of distilled water in the recently purchased (2011) MoM samples. The TG showed a two-step process, losing water at 80?C135?°C for unbound water and bound water (MgO·H₂O) at 376?C404?°C, yielding a total average water loss of 91.9?% for name brand and 90.7?% for generic brand by mass. The difference between the high-temperature TG and the lower-temperature DSC can be attributed for the decomposition of magnesium hydroxide or MgO·H₂O. Therefore in performing this new approach to water analysis by heating to a high temperature decomposed the magnesium hydroxide residue. It was determined that the TG method was the most accurate for determining bound and unbound water.     

A pseudo‐quadruple hydrogen‐bonding motif consisting of six N—H⋯O hydrogen bonds in trimethoprim formate

The title compound, trimethoprim (TMP) formate [systematic name: 2,4‐di­amino‐5‐(3,4,5‐tri­methoxy­benzyl)­pyrimidin‐1‐ium formate], C₁₄H₁₉N₄O₃⁺·CHO₂^?, reveals a pseudo‐quadruple hydrogen‐bonding motif consisting of six N—H?O hydrogen bonds involving two unpaired TMP cations and two formate anions which are symmetrically disposed. The hydrogen‐bonding motif is strikingly comparable with that observed in other TMP salts where the amino­pyrimidine moieties of the TMP cations are centrosymmetrically paired. These conserved hydrogen‐bonding motifs may serve as robust synthons in crystal engineering and design. The characteristic pseudo‐quadruple hydrogen‐bonding motif and other intermolecular hydrogen bonds operating in the crystal form a two‐dimensional supramolecular sheet structure.     

Synthesis,crystal structure and characterization of manganese(III) complex containing a tetradentate Schiff base

N,N′-bis((2-hydroxyphenyl)(phenyl)methylidene)propane-1,2-diaminato-N,N′,O,O′)-(nitrato-O)-manganese(III) methanol solvate ([Mn(C₂₉H₂₄N₂O₂)(NO₃)CH₃OH]) was synthesized and characterized by FTIR, UV–Vis, TG–FTIR, TG/DSC, molar conductivity, magnetic moment measurement and single crystal X-ray analysis. In the structure, the Mn(III) ion adopts a distorted octahedral geometry with two nitrogen and two oxygen atoms from the Schiff base ligand in the equatorial plane, and the nitrate ion and methanol molecule in the axial position. The effects of organic solvents of various polarities on the UV–Vis spectra of the ligand and complex were investigated. The manganese(III) complex is easily dissolved in organic polar aprotic solvents and has moderate solubility in organic polar protic solvents.     

Synthesis,Structure, and Properties of Nonlinear Optical Crystal Na2SiF6

Nonlinear optical crystals of fluosilicate Na₂SiF₆ are synthesized via hydrothermal method and its structure is determined by single‐crystal X‐ray diffraction (XRD). The space group of Na₂SiF₆ is P321 with cell parameters a = 8.8715(3) Å, c = 5.0484(5) Å, Z = 3, V = 344.09(4) ų. The properties of the crystal are measured by powder XRD, infrared (IR) spectroscopy, ultraviolet/visible (UV/Vis) near‐infrared (NIR) diffuse reflectance spectroscopy, thermogravimetric (TG), and differential scanning calorimetry (DSC) analysis. The bandgap calculated using CASTEP is 7.41 eV, indicating that the cut‐off edge of the Na₂SiF₆ crystal can be down to deep‐UV energy region. The first‐principles studies were performed to elucidate the structure/property relationship of Na₂SiF₆.     

Glass transition temperature and thermal decomposition of cellulose powder

Cellulose powder and cellulose pellets obtained by pressing the microcrystalline powder were studied using differential scanning calorimetry (DSC), differential thermal analysis (DTA), and thermal gravimetry (TG). The TG method enabled the assessment of water content in the investigated samples. The glass phase transition in cellulose was studied using the DSC method, both in heating and cooling runs, in a wide temperature range from −100 to 180 °C. It is shown that the DSC cooling runs are more suitable for the glass phase transition visualisation than the heating runs. The discrepancy between glass phase transition temperature T _g found using DSC and predictions by Kaelbe’s approach are observed for “dry” (7 and 5.3% water content) cellulose. This could be explained by strong interactions between cellulose chains appearing when the water concentration decreases. The T _g measurements vs. moisture content may be used for cellulose crystallinity index determination.     

Thermal characterization of the poultry fat biodiesel

Chemical composition of oils and fats used in the biodiesel synthesis can influence in processing and storage conditions, due to the presence of unsaturated fatty acids. An important point is the study of the biodiesel thermal stability to evaluate its quality using thermal analysis methods. In this study the thermal stabilities of the poultry fat and of their ethyl (BEF) and methyl (BMF) biodiesels were determined with the use of thermogravimetry (TG/DTG), differential thermal analysis (DTA) and differential scanning calorimetry (DSC), in different atmospheres. The TG/DTG curves of the poultry fat in synthetic air presented three decomposition steps while only one step was observed in nitrogen (N₂) atmosphere. The DSC results indicated four exothermic enthalpic transitions in synthetic air and an endothermic transitions in N₂ atmosphere attributed to the combustion process and to the volatilization and/or decomposition of the fatty acids, respectively. For both biodiesels the TG/DTG curves in air indicated two mass loss steps. In the DSC curves four exothermic transitions were observed in synthetic air besides an endothermic one in N₂ atmosphere.