Chemical Analysis of Historic Art and Painting Conservation Materials (19th and 20th Centuries) from the National Museum in Krakow by Gas Chromatography–Mass Spectrometry and Fourier Transform Infrared Spectroscopy

Chemical composition of varnishes Vernis a Tableaux Vibert by Lefranc & Cie, Schutzfirnis für Oelgemalde Schmincke's Retuschier-Firnis by Schmincke & Co. Düsseldorf, Tempera-Firnis by Schmincke & Co. Düsseldorf, Bernstein-Gemaldefirniss für Ludwig'sche Petroleumfarben by Dr. Schoenfeld Düsseldorf, and Vernis Martin Pour Laquer by Lefranc & Cie Paris; oil medium Copal en pâte by Duroziez; essential oils Oleum Cupressi by Polak & Schwarz and Oleum Calami by Polak & Schwarz; fixative for charcoal, crayons, and pastels Nr 840/4 by Iskra & Karmański; and restoring medium for paintings Prof. Dr. Büttner's Phobus by Schmincke Düsseldorf were analyzed with gas chromatography–mass spectrometry. The analyses were conducted to obtain information about the exact composition of these products, which are stored at the National Museum in Krakow and were used by conservators. The results of research facilitate understanding of processes used in paintings and planning methods for their conservation.     

Design of Some Oxide/Metal Composite Supports and Catalysts

Textural, mechanical and catalytic properties of porous composite materials Al₂O₃/Al, MeO _x (Me)/Al₂O₃/Al with metal particles homogeneously distributed in the alumina matrix were studied. These materials were prepared by mixing the powdered components with aluminum followed by hydrothermal treatment and calcination. The macroporous structure was shown to be controlled by the size of large (>microns) particles in starting blends. The mesoporous structure is primarily determined by the properties of alumina formed by dehydration of hydroxide produced in turn via aluminum oxidation by water. The mechanical strength of porous cermets is determined by the number and properties of contacts between micron-size components of composites. Improved catalytic performance of composites is ensured by the developed macroporous structure providing enhanced mass transfer inside the cermet granules.     

Superacid Catalyst SO42-/ZrO2-La2O3 Prepared by Ultrasonic Co-precipitation and Low Temperature Aging

低温陈化超声波共沉淀法制得SO₄^2-/ZrO^2-La₂O₃前驱体, 经H₂SO₄处理, 在不同温度下焙烧得到纳米晶催化剂SO₄^2-/ZrO^2-La₂O₃;用Hammett指示剂法测定其酸性. 用XRD、BET、TEM、IR和XPS对样品进行表征,其催化活性用醋酸和甘油的酯化反应进行了评价. 结果表明经超声波搅拌和低温(-15 ºC)陈化,650 ºC焙烧4 h得到的固体超强酸表现出较高催化活性.     

N.M.R. Spectra of the Fuchs0Nes: Structure of Naphthofuchsone

Following the initial synthesis of the fuchsones¹I, (α, η -diphenyl-1,4-benzoquinone methides), numerous substituted members of this series have been described by workers interested in triphenylmethane dyes. The fuchsones have been synthesized by the sulfuric acid condensation of benzilic acid and appropriate phenol¹, by dehydration of 4-hydroxytriphenylcarbinol², by oxidation 4-hydroxytri-phenylmethane and by photochemically induced reactions benzophenones with 2,6-dialkylphenols⁴.     

Crystalline TiO2 grafted with poly(2-methacryloyloxyethyl phosphorylcholine) via surface-initiated atom-transfer radical polymerization

Crystalline TiO₂ films were prepared by unbalanced magnetron sputtering and the structure was confirmed by XRD. An organic layer of 11-hydroxyundecylphosphonic acid (HUPA) was prepared on the TiO₂ films by self-assembling, and the HUPA on TiO₂ films was confirmed by FTIR analysis. Simultaneously, hydroxyl groups were introduced in the phosphonic acid molecules to provide a functionality for further chemical modification. 2-Methacryloyloxyethyl phosphorylcholine (MPC), a biomimetic monomer, was chemically grafted on the HUPA surfaces at room temperature by surface-initiated atom-transfer radical polymerization. The surface characters of TiO₂ films modified by poly-MPC were confirmed by FTIR, XPS and SEM analysis. Platelet adhesion experiment revealed that poly-MPC modified surface was effective to inhibit platelet adhesion in vitro.     

A thermoelastic method to accurately measure the grüneisen parameter and thermal diffusivity

A homogeneous thermoelastic heat source is fed, in a cylindrical sample, by compression; the amount of generated heat is controlled by the Grüneisen parameter. The heating process is followed by a thermal relaxation controlled by the thermal diffusivity. The temperature transient is detected by a miniature temperature sensor mounted on the lateral surface of the sample. The value obtained for the Grüneisen parameter of a technological steel is 1.14±0.03, the thermal diffusivity turning out to be (6.1±0.1)·10⁻⁶ m² s⁻¹.     

Cobalt-containing oxide layers on titanium, their composition, morphology, and catalytic activity in CO oxidation

In this study possibility to form the layered compositions CoO_x + SiO₂/TiO₂/Ti by plasma electrolytic oxidation (PEO) method was shown. Compositions have been obtained by both one-stage PEO method (Method I) with addition of Co(CH₃COO)₂ into silicate electrolyte and impregnation of preliminary obtained by the PEO method SiO₂/TiO₂/Ti systems in aqueous solutions containing cobalt salts with their following annealing (Method II). XRD, XPS and SEM/EDX were used to investigate the phase and element composition, microstructure of the coatings prepared by the two various methods. Catalytic activity of the cobalt-containing composites was investigated in the CO oxidation reaction. Under experimental conditions, the structures obtained by impregnation and annealing method were more active, than those obtained by one-stage PEO method. The surface structures of cobalt-containing coatings obtained by the PEO method and by impregnation and annealing differ in both quantitative and qualitative relation. The cobalt content on the surface of impregnating coatings is three times as much as that for those formed by one-stage PEO method. It is found that coatings obtained by the Method II have a more developed surface. The surface of CoO_x + SiO₂/TiO₂/Ti compositions obtained by the PEO method contains, presumably Co(OH)₂ and Co₃O₄. The surface of the similar compositions obtained by the Method II, possibly contains CoO, either Co₂O₃, or CoOOH. The combination of these factors, perhaps, also provides a higher activity of the compositions formed by the Method II.     

Adsorption and structural properties of soft-templated mesoporous carbons obtained by carbonization at different temperatures and KOH activation

Two series of phenolic resin-based mesoporous carbons were prepared by soft-templating strategy, which involves the formation of thermosetting carbon precursor by polymerization of phloroglucinol and formaldehyde in hydrophilic mesodomains of a thermally decomposable triblock copolymer used as a soft-template. It was shown that the volumes of mesopores and micropores in the resulting carbons can be tuned by varying carbonization temperature of phenolic resins in the range from 400 to 1000 °C followed by the post-synthesis KOH activation at 700 °C. The highly microporous carbons were obtained by KOH activation of phenolic resins pyrolyzed at lower temperature (∼500 °C), while high temperature KOH activation (∼800 °C) afforded microporous carbons with preserved mesoporosity.     

Creation evidence of the second non-dispersive Zakharenko wave by helium atomic beams in superfluid helium-II at low temperatures

In this work, the experimental results of the creation of the second non-dispersive Zakharenko wave (C _ph = C _g ≠ 0) in the negative roton branch (the so-called second sound) of the bulk elementary excitations (BEEs) energy spectra are introduced. Several BEE signals detected by a bolometer situated in the isotopically pure liquid helium-II at low temperatures ∼100 mK are shown, which give evidence of negative roton creation in the liquid by helium atomic beams striking the liquid surface. The negative roton signals were clearly distinguished by the following ways: the negative roton signal created by helium atomic beams appeared earlier than the positive roton signal created by the beams, and presence of both positive and negative roton signals together. It is natural that the negative roton creation by the beams requires the ⁴He-atom energies ∼12 K, while the positive roton creation by the atomic beams requires energies ∼35 K. Therefore, successive increase in the heater power resulting in an increase in the ⁴He-atom energies gives solid evidence that the negative rotons are first created in the liquid by the helium atomic beams.      

Theoretical Study on Destruction Mechanism of 2,3,7,8-TCDD by O3 and NO3

采用B3LYP/6-31G(d)方法优化获得O₃及NO₃降解2,3,7,8-TCDD反应通道上驻点的几何构型, 得到微观反应进程,并采用MP2/6-311G(d,p)//B3LYP/6-31G(d)方法计算得到相关反应的活化能. 研究表明,O₃和NO₃采用不同的方式对2,3,7,8-TCDD进行降解. O₃通过臭氧加成及碳碳双键断裂使2,3,7,8-TCDD降解,而NO₃通过氯取代反应使得2,3,7,8-TCDD上2,3,7,8取代位置上的氯原子被取代为氧原子,从而达到有效降解的目的. O₃降解2,3,7,8-TCDD的反应能垒显著小于NO₃降解2,3,7,8-TCDD的反应能垒,表明O₃降解2,3,7,8-TCDD的能力显著高于NO₃.     

Surface structures formed by individual adsorption and coadsorption of Mn and Bi on Cu(0 0 1), studied by LEED

We have studied the individual adsorption of Mn and Bi, and their coadsorption on Cu(0 0 1) by low-energy electron diffraction (LEED). For Mn, we have determined the c(2 × 2) structure formed at 300 K, whose structure had been determined by several methods. We reconfirmed by a tensor LEED analysis that it is a substitutional structure and that a previously reported large corrugation (0.30 Å) between substitutional Mn and remaining surface Cu atoms coincides perfectly with the present value. In the individual adsorption of Bi, we have found a c(4 × 2) structure, which is formed by cooling below ∼250 K a surface prepared by Bi deposition of ∼0.25 ML coverage at 300 K where streaky half-order LEED spots appear. The c(4 × 2) structure has been determined by the tensor LEED analysis at 130 K and it is a substitutional structure. In the coadsorption, we found a c(6 × 4) structure, which has been determined by the tensor LEED analysis. It is very similar to the previously determined structure of the c(6 × 4) formed by coadsorption of Mg and Bi, and embedded MnBi₄ clusters are arranged in the top Cu layer instead of MgBi₄. Large lateral displacements of Bi atoms in the c(6 × 4)-(Mn + Bi) suggest that the Mn atoms undergo the size-enhancement caused by their large magnetic moment.     

Introducing CdS into two- and three-dimensional photonic crystals

SiO₂/air three-dimensional (3D) periodic structures were fabricated by removing Si layers partially from Si/SiO₂ 3D photonic crystals (PhCs) formed by using autocloning. CdS/SiO₂ 3D periodic structures were formed by introducing CdS into the SiO₂/air structures by the TEA method and photoluminescence (PL) was observed from the introduced CdS. TiO₂/air/CdS two-dimensional (2D) PhCs were also fabricated by introducing CdS into the voids of TiO₂/air 2D periodic structures, in which SiO₂ layers were partially etched out from TiO₂/SiO₂ 2D PhCs fabricated by using autocloning. PL radiating normal to the surface was measured and large polarization dependence was observed.     

On the limitations of the equation of state based on the Lennard-Jones potential

It is emphasized that any equation of state (EOS) based on the generalized Lennard-Jones potential or the Mie potential, suffers from two main shortcomings as pointed out by Stacey and Davis [2]. One of the shortcomings viz. the problem related to imaginary numbers for the exponents in the potential function, has been removed recently by Jiuxun [11] by using a relationship between the exponents. However, the modified EOS obtained by Jiuxun suffers from the second shortcoming viz. it gives lower values for −B ₀ B″₀, an important equation of state parameter related to the second pressure derivative of the bulk modulus. Values of B ₀ B″₀ obtained by Jiuxun are not consistent with those reported by Stacey and Davis.      

Synthesis and characterization of pure and ZrO2-doped nanocrystalline CuO-NiO system

The physicochemical, surface and catalytic properties of pure and doped 0.25CuO-NiO solids prepared by sol-gel method were investigated. The dopant concentration was 2, 4 and 6 mol% ZrO₂. The solids investigated were calcined at 400 and 600 °C. The techniques employed were XRD, EDX, TEM, surface excess oxygen, nitrogen adsorption at −196 °C and catalytic oxidation of CO by O₂ using both static and flow methods. The results revealed that the investigated system dissolved 4 mol% ZrO₂ by heating at 400 °C. This process was accompanied by a significant increase in the S_BET and V_p with subsequent decrease in the (r) values of the doped adsorbent. ZrO₂-doping of the system investigated followed by calcination at 400 and 600 °C led to a considerable increase in its catalytic activity in CO oxidation by O₂ using static and flow methods. The doping process was not accompanied by any change in the activation energy of the catalyzed reaction.     

Coulomb excitation of neutron-rich 138,140,142Xe at REX-ISOLDE

We report on “safe” Coulomb excitation of neutron-rich ^138,140,142Xe nuclei. The radioactive nuclei have been produced by ISOLDE at CERN and post-accelerated by the REX-ISOLDE facility. The γ-rays emitted by the decay of excited states have been detected by the MINIBALL array. Recent results are presented.     

Temperature dependence of the surface reactivity of SiH3 radicals and the surface silicon hydride composition during amorphous silicon growth

For hydrogenated amorphous silicon (a-Si:H) film growth governed by SiH₃ plasma radicals, the surface reaction probability β of SiH₃ and the silicon hydride (-SiH_x) composition of the a-Si:H surface have been investigated by time-resolved cavity ringdown and attenuated total reflection infrared spectroscopy, respectively. The surface hydride composition is found to change with substrate temperature from -SiH₃-rich at low temperatures to SiH-rich at higher temperatures. The surface reaction probability β, ranging from 0.20 to over 0.40 and with a mean value of β=0.30±0.03, does not show any indication of temperature dependence and is therefore not affected by the change in surface hydride composition. It is discussed that these observations can be explained by a-Si:H film growth that is governed by H abstraction from the surface by SiH₃ in an Eley-Rideal mechanism followed by the adsorption of SiH₃ at the dangling bond created.     

Ca3－x AgxCo4O9(x=0—0.05)氧化物的电输运性能

Ca位掺杂可以优化Ca₃Co₄O₉复合氧化物的电输运性能. 采用柠檬酸溶胶凝胶结合放电等离子烧结制备了Ca位微量掺杂Ag的Ca_3-xAg_xCo₄O₉(x=0—005)氧化物块体试样,通过X射线衍射、扫描电子显微镜、电参数测试仪分析了所得试样. 试验结果表明: 产物呈单一物相,Ca位微量掺杂Ag降低了Ca_{关键词： 3}Co₄O₉')" href="#">Ca₃Co₄O₉ 掺杂 电输运     

Characteristics improvement of HfO2/Ge gate stack structure by fluorine treatment of germanium surface

Chemical reactivity of fluorine molecule (F₂)-germanium (Ge) surface and dissociation of fluorine (F)-Ge bonding have been simulated by semi-empirical molecular orbital method theoretically, which shows that F on Ge surface is more stable compared to hydrogen. Ge MIS (metal insulator semiconductor) capacitor has been fabricated by using F₂-treated Ge(1 0 0) substrate and HfO₂ film deposited by photo-assisted MOCVD. Interface state density observed as a hump in the C-V curve of HfO₂/Ge gate stack and its C-V hysteresis were decreased by F₂-treatment of Ge surface. XPS (X-ray photoelectron spectroscopy) depth profiling reveals that interfacial layer between HfO₂ and Ge is sub-oxide layer (GeO_x or HfGeO_x), which is believed to be origin of interface state density.F was incorporated into interfacial layer easily by using F₂-treated Ge substrate. These results suggest that interface defect of HfO₂/Ge gate stack structure could be passivated by F effectively.     

Goos–Hänchen shifts of a light beam reflected from the interface of colloidal ferrofluids

Controllable Goos–Hänchen shift of a light beam reflected from the colloidal ferrofluids is investigated by using the stationary-phase method. It is found that the Goos–Hänchen shift can be easily controlled by the local H_e factor and the volume factor. Using this scheme, the peak value, the peak position and the width of the Goos–Hänchen shift can all be controlled by adjusting the external magnetic field for a fixed configuration, which also provides a possibility for obtaining larger negative Goos–Hänchen shift by changing the external controlling field. Our results have potential applications in optical devices.     

Synthesis of a new Hg(II) coordination polymer: Ultrasonic-assisted synthesis and mechanical preparation of nanostructure

A new mercury(II) coordination polymer, [Hg(4-bpmo)I₂]_n (1), (4-bpmo = N,N′-bis(pyridin-4-ylmethyl)oxalamide), was synthesized, by branched tube method, and structurally characterized by single-crystal X-ray diffraction. Compound 1 is a polymer with a distorted tetrahedral HgN₂I₂ coordination environment. The thermal stability of 1 was studied by thermal gravimetric (TG) and differential thermal (DTA) analyses. Also 1 was prepared by a sonochemical process at ambient temperature. Reaction time and concentration of initial reagents effects on the size and morphology were studied. Nanoparticles of 1, was synthesized easily by a mechanical method (neat grinding). The resulting structures were characterized by scanning electron microscopy (SEM), IR spectroscopy and X-ray powder diffraction (XRD).