Electrochemical Sensor for Detection of p-Nitrophenol Based on Nickel Oxide Nanoparticles/α-Cyclodextrin Functionalized Reduced Graphene Oxide

p-Nitrophenol (p−NP) is a high priority toxic pollutant and that has harmful effects on human, animals and plants. Thus, the detection and determination of p−NP present in the environment is an urgent as well as highly important requisite. The present article, therefore focused on the construction of a novel electrochemical sensor based on NiO nanoparticles/α-cyclodextrin functionalized reduced graphene oxide modified glassy carbon electrode (NiO−NPs-α-CD-rGO-GCE) for the selective and sensitive detection of p−NP. UV-vis, high resolution transmission electron microscopy (HR-TEM), selected area electron diffraction pattern (SAED) and X-ray diffraction (XRD) analysis confirms the formation of highly pure NiO nanoparticles. Field emission scanning electron microscopy (FE-SEM), energy dispersive X-ray spectroscopy (EDS), and cyclic voltammetry (CV) were used to characterize the step-wise electrode modification process. DPV was carried out to quantify p−NP within the concentration range of 1−10 μM and found the detection limit of 0.12 nM on the basis of the signal-to-noise ratio S/N=3. The electrode can able to detect different isomers of nitrophenols. Interferences of other pollutants such as phenol, p-aminophenol, o- and m- nitrophenol, 4-chlorophenol, 2,6-dichlorophenol and ions like K⁺, Cd²⁺, Cl⁻, SO₄²⁻ did not affect the sensing of p−NP. The newly developed sensor exhibited diffusion controlled kinetics and had excellent sensitivity, selectivity and reproducibility for the detection of p−NP. The electrode showed good recoveries in real sample analysis.     

Electrochemical Sensor Based on Magnetic Fe3O4–Reduced Graphene Oxide Hybrid for Sensitive Detection of Binaphthol

Russian Journal of Electrochemistry - Naphthol is an environmental pollutant with highly toxic and corrosive. Naphthol can be absorbed by the body easily through the skin, and can cause serious...     

Electrochemical Behavior of Novel Composite Based on Reduced Graphene Oxide,Poly-o-Phenylenediamine,and Silicotungstic Аcid

Russian Journal of Electrochemistry - The behavior of novel electroactive material based on reduced graphene oxide (RGO), poly-o-phenylenediamine (PPD), and silicotungstic acid (SiW) is studied...     

Acetylcholinesterase Biosensor Based on Reduced Graphene Oxide – Carbon Black Composite for Determination of Reversible Inhibitors

For the first time, acetylcholinesterase (AChE) biosensors based on mixed carbon nanomaterials (electrochemically reduced graphene oxide (ERGO) and carbon black (CB) particles) were described for the determination of antidementia drugs. Changes in the content of underlying layer allowed varying selectivity and sensitivity of the inhibitor determination. Appropriate limits of detection (LOD) varied in the range from 1 pM to 0.1 nM for donepezil, 5 nM–0.1 μM for berberine, 0.1–50 nM for huperzine A and 0.1–300 nM for galantamine. Variation in the inhibition measurement parameters can be used for increasing selectivity of the measurements.     

Evaluation of Electrochemically Reduced Gold Nanoparticle—Graphene Nanocomposites for the Determination of Dopamine

Two gold nanoparticle-graphene nanocomposites were electrochemically obtained by the one-step constant potential coreduction of graphene oxide and gold ions or the electrodeposition of gold nanoparticles on graphene oxide followed by electrochemical reduction of graphene oxide. The surface morphology, electron transfer rate, and electrocatalytic activity toward the oxidation of dopamine on these nanocomposites were systematically studied. The results showed that both preparations synthesized gold nanoparticle-graphene nanocomposites. The nanocomposite obtained by the one-step synthesis showed higher electron transfer kinetics and electrocatalytic activity toward dopamine than the material obtained by the two-step synthesis. Consequently, the one-step nanocomposite was used to modify a glassy carbon electrode to form a dopamine sensor. Differential pulse voltammetry was used to detect dopamine with a detection limit of 0.1 micromolar and a linear dynamic range from 0.2 to 20 micromolar. The sensor displayed good stability, high reproducibility, and was used for the determination of dopamine in human urine.     

Novel Electrochemical Sensor for Sunset Yellow Based on a Platinum Wire–Coated Electrode

Abstract

In this research, the construction and general performance characteristics of a sunset yellow sensor based on sunset yellow–cetyl pyridinum (SY-CPY) ion pair as an ion exchanger were described. A coated platinum wire electrode (CPE) was prepared and compared with coated graphite (CGE) and membrane electrode (PME). The CPE exhibited a rapid and Nernstian response (?29.77 ± 0.2 mV decade^?1) to SY concentration range from 3.16 × 10^?7 to 3.16 × 10^?3 mol dm^?3 within pH 4.5–9.5. Interfering effects of some foreign substances were reported. The optimized matrix was successfully applied to the determination of SY in artificial mixtures and commercial soft drinks. The results showed good agreements with the determination made by use of high-performance liquid chromatography.     

Preparation and Characterization of Reduced Graphene Oxide–Fe3O4 Nanocomposites in Polyacrylamide

Russian Journal of Physical Chemistry A - A hydrogel nanocomposite composed of reduced graphene oxide (RGO), iron oxide (Fe3O4) nanoparticles, and polyacrylamide (PAM) was prepared using radical...     

Electrochemical Acetylcholinesterase Biosensor Based on Polylactide–Nanosilver Composite for the Determination of Anti-dementia Drugs

A new acetylcholinesterase biosensor has been developed for the determination of anticholinesterase drugs applied for neurodegenerative disease treatment. For this purpose, silver nanosendrites were deposited by potentiostatic electrolysis on a glassy carbon electrode covered with oligolactides cross-linked with p-tert-butylthiacliax[4]arene core in the cone, partial cone, and 1,3-alternate configurations. The roles of macrocycle configuration and electrolysis conditions on the silver depostion were characterized and optimal conditions selected for the subsequent immobilization of acetylcholinesterase. Silver nanoparticles provide higher response at low working potential (0.05?V) due to the electrostatic accumulation of silver ions and prevention of their leaching after reoxidation. The biosensor allows the determination of 10^?12 – 10^?7 M donepezil, berberine, and huperzine A within 20-30?s by the relative decay of the current related to the oxidation of thiocholine formed in enzymatic reaction. The reversible inhibition of immobilized acetylcholinesterase with huperzine A was quantified for the first time. The developed biosensor was employed for the analysis of spiked urine samples.     

A Novel Sensitive Method for the Determination of Cadmium and Lead Based on Magneto‐Voltammetry

Abstract

A novel method for the ultratrace determination of Cd²⁺ and Pb²⁺ based on magneto‐voltammetry was developed. In the presence of a low strength magnetic field of 0.6 T, square wave stripping voltammetry (SWSV) of Cd²⁺ and Pb²⁺ was performed in this determination. A high concentration of redox species Fe³⁺ was added to the analytes to generate a large cathodic current during the preconcentration step. A large Lorentz force arising from the flux of net current through the magnetic field resulted in convective solution flow due to magnetohydrodynamics. Then more metal ions deposited on the electrode surface at a faster rate and an enhancement as large as 160% for the stripping peak current was observed. Under the optimal conditions, this method exhibits high sensitivities of 5.67 µA µM^?1 for Cd²⁺ and 6.98 µA µM^?1 for Pb²⁺, over the 1×10^?8 – 1×10^?6 mol l^?1 range. Detection limits as low as 9.0×10^?10 and 8.6×10^?10 mol l^?1 for Cd²⁺ and Pb²⁺ were obtained with a 2 min preconcentration time, respectively. The method was successfully applied to detect Cd²⁺ and Pb²⁺ in real water samples and the results were in agreement with atomic absorption spectrometry.     

A Novel Amperometric Nitric Oxide Sensor Based on Polythionine / Nation Modified Glassy Carbon Electrode

A novel amperometric sensor for the determination of nitric oxide was developed by coating polythionine / nafion on a glassy carbon electrode. This sensor exhibited a great enhancement to the oxidation of nitric oxide. The oxidation peak currents were linear to the concentration of nitric oxide over the wide range from 3.6×10-7 to 6.8×10-5 mol.L-1, and the detection limit was 7.2×10-8 mol.L-1. Experimental results showed that this nitric oxide sensor possessed excellent selectivity and longer stability. NO releasing from rat kidney was monitored by this sensor.     

Luminescent Sensor for Cr2O72–: A Novel Coordination Polymer Based on Flexible Homophthalic Acid

Russian Journal of General Chemistry - A novel luminescence coordination polymer [Zn(hmph)(bibp)]n (1) has been synthesized by mild solvothermal method. It crystallizes in the orthorhombic space...     

A Novel Derivatization Method Coupled with GC–MS for the Simultaneous Determination of Chloropropanols

A sensitive and rapid derivatization method for the simultaneous determination of chloropropanols [1,3-dichloropropan-2-ol (1,3-DCP), 2,3-dichloropropan-1-ol (2,3-DCP) and 3-chloropropane-1,2-diol (3-MCPD)] has been developed. The three chloropropanols were silylated with 1-trimethylsilylimidazole and then determined by GC–MS. n-Undecane was used as the internal standard. The limits of detection (LOD) were 0.20, 0.10, 0.14 μg kg^?1 for 1,3-DCP, 2,3-DCP and 3-MCPD, respectively. The three compounds behaved >0.999 of linearity and satisfactory precision with the relative standard deviation (RSD) <10%. The excellent validation data suggested that this method was more effective than heptafluorobutyrylimidazole derivatization, and 1-trimethylsilylimidazole was considered as a promising silylating reagent to be widely applied to measurements of chloropropanols in real samples.     

A Nonenzymatic Glucose Sensor Based on a Copper Nanoparticle–Zinc Oxide Nanorod Array

A non-enzymatic sensor for glucose based on copper nanoparticles and zinc oxide nanorod array modified fluorine-doped tin oxide conductive glass electrode was constructed by two-step electrodeposition. The electrode was characterized by scanning electron microscopy and X-ray diffraction. The electrochemical behavior of the modified electrodes was investigated by cyclic voltammetry and electrochemical impedance spectroscopy. Under the optimal conditions, the modified electrode offered a rapid response to glucose in the range from 5 × 10^?6 M to 1.1 × 10^?3 M (R = 0.9975) with a detection limit of 3 × 10^?7 M (S/N = 3) and a sensitivity of 609.8 µA · mM^?1. The preparation and operation of the biosensor was simple, had lower cost, and offered excellent performance due to its high sensitivity, good stability, reproducibility, and selectivity against other substances. The satisfactory results illustrated that it was promising for the determination of glucose in alkaline solutions.     

A New Electrochemical Sensor Based on Carbon Black Modified With Palladium Nanoparticles for Direct Determination of 17α-Ethinylestradiol in Real Samples

Electrochemical sensors to quantify concentrations of emerging pollutants have attracted great attention from the industry and scientific community. Nanomaterials such as carbon black have been applied in sensors to identify substances that are toxic to the environment and human health due to their excellent electroanalytical properties. The aim of the study was to develop a novel electrochemical sensor for the endocrine disruptor hormone determination. To our knowledge, for the first time the synthesis of material based on carbon black containing immobilized palladium nanoparticles, with the application for the hormone ethinylestradiol, is reported in the literature. The material was synthesized, characterized, and applied to the determination in tap water and human urine of the synthetic hormone 17α-ethinylestradiol (EE2), which is currently considered an emerging pollutant. The morphology, structure and electrochemical performance of the sensors were characterized by scanning electron microscopy (SEM) and cyclic voltammetry (CV). Differential pulse voltammetry (DPV) in sodium phosphate buffer solution at pH 5.0 allowed the generation of a method to quantify the concentration of 17α-ethinylestradiol in a linear range of 0.5–119.0 μmol L⁻¹, obtaining 81.0 nmol L⁻¹ of calculated limit of detection (LOD). The system was efficient in detecting 17α-ethinylestradiol in real urine samples and showed no interferences for ascorbic acid, uric acid, progesterone, and dopamine. It is noteworthy that the results obtained showed good recovery values, considering that the urine samples were not previously treated or pre-concentrated, which suggests the development of an electrochemical sensor that works in situ and in real time to monitor relevant substances in the control clinical and environmental, with the possibility of point-of-care analyses.     

Electrochemical Determination of Copper(II) in Water Samples Using a Novel Ion-Selective Electrode Based on a Graphite Oxide–Imprinted Polymer Composite

A novel copper(II)-selective electrode based on graphite oxide/imprinted polymer composite was developed for the electrochemical monitoring of copper(II) (Cu²⁺) ions. The electrode exhibited highly selective potentiometric response to Cu²⁺ with respect to common alkaline, alkaline earth and heavy metal cations. The composite composition studies indicated that the most suitable composite composition performing the most promising potentiometric properties was 20.0% ionophore (Cu²⁺-ion imprinted polymer), 10.0% paraffin oil, 5.0% multiwalled carbon nanotubes, and 65.0% graphite oxide. The fabricated electrode exhibited a linear response to Cu²⁺ over the concentration range of 1.0?×?10^??6–1.0?×?10^??1?M (correlation coefficient of 0.9998) with a sensitivity of 26.1?±?0.9?mV decade^??1. The detection limit of the fabricated electrode was determined to be 4.0?×?10^??7?M. The electrode worked well in the pH range of 4.0–8.0. The electrode had stable, reversible and fast potentiometric response (3?s). In addition, the electrode had a lifetime of more than 1 year. The analytical applications of the proposed electrode were performed using as an indicator electrode for the potentiometric titration of Cu²⁺ with ethylene diamine tetraacetic acid solution and for the determination of Cu²⁺ of spiked river, dam, and tap water samples. The obtained results for potentiometric titration and water samples were satisfactory.     

Performance of Pt—TiO2 Electrocatalyst for CO Oxidation in the Electrochemical Gas Sensor

It is reported for the first time that the Pt/TiO2 electrocatalyst was successfully used for the electrocatalytic oxidation of CO in the electrochemical gas sensor with a controlled potential mode. The stability of electrocatalytic activity of the Pt-TiO2 electrocatalyst for the CO oxidation is better than that of Pt.     

QCM‐Based Immunosensor for the Determination of Ochratoxin A

Abstract

A piezoelectric immunosensor based on a competitive format was developed for determination of ochratoxin A (OTA) concentration. Surface modifications via two self‐assembled monolayers (SAMs) were investigated respectively and a better result was obtained with the SAM of 16‐mercaptohexadecanoic acid (16‐MHDA). The quartz crystal microbalance (QCM)‐based immunosensor was fabricated by immobilizing anti‐OTA antibodies onto the surface of the 16‐MHDA‐modified electrode, and allowing competition between free OTA and that conjugated with BSA to occur. The assay exhibited a working range of 50–1000 ng/mL and a detection limit of 16.1 ng/mL. Studies of interference and matrix effects were performed to evaluate the feasibility of the developed immunosensor for the direct analysis of OTA in real samples. Recoveries were conducted at 50, 200, and 1000 ng/g and were determined to be in the range of 142%–76%. The OTA assay is specific. No cross‐reactivates were observed with citrinin.     

An Acetylcholinesterase Sensor Based on a Pillar[6]arene–Silver Nanoparticle Composite for the Determination of Drugs for the Treatment of Alzheimer’s Disease

Journal of Analytical Chemistry - We developed a voltammetric sensor based on a glassy carbon electrode modified with carbon black, pillar[6]arene, and silver nanoparticles for the determination of...     

A Study of the Electrochemical Characteristics of Single-Chamber Solid Oxide Fuel Cells Based on Platinum and Strontium-Doped Lanthanum Manganite Electrodes and Fed with a Methane–Air Mixture

Kinetics and Catalysis - The properties of single-chamber solid oxide fuel cells (SC SOFCs) composed of an electrolyte based on yttria-stabilized zirconia (YSZ), a platinum anode, and a...     

A Method of Determining Selectivity Coefficients Based on the Practical Slope of Ion Selective Electrodes

It is a problem to be solved that the experimental selectivity coefficients of ion selective electrodes( ISEs) depend on the activity. This paper studied the new method of determining selectivity coefficients. A mixed ion response equation, which was similar to Nicolsky-Eisenman (N-E) equation recommended by IUPAC, was proposed. The equation includes the practical response slope of ISEs to the primary ion and the interfering ion. The selectivity coefficient was defined by the equation instead of the N-E equation. The experimental part of the method is similar to that based on the N-E equation. The values of selectivity coefficients obtained with this method do not depend on the activity whether the electrodes exhibit the Nernst response or non-Nernst response. The feasibility of the new method is illustrated experimentally.