N,N'-dialkyl- and N-alkyl-N-mesityl-substituted N-heterocyclic carbenes as ligands in Grubbs catalysts

Various symmetrically and asymmetrically substituted N-heterocyclic carbene (NHC) ligands bearing aliphatic nitrogen-containing side groups have been synthesised. In our attempts to isolate the corresponding second-generation Grubbs catalysts, we were unsuccessful when using the symmetrical aliphatic NHC ligands. For the asymmetrical ligands bearing an aliphatic moiety on one side and an aromatic mesityl group on the other side, substitution of a phosphine ligand was achieved. The performance of a so-formed series of Ru-based metathesis initiators has been evaluated for the ring-opening metathesis polymerisation (ROMP) of cycloocta-1,5-diene and the ring-closing metathesis (RCM) of diethyl diallylmalonate.     

Novel metathesis catalysts based on ruthenium 1,3-dimesityl-3,4,5,6-tetrahydropyrimidin-2-ylidenes: synthesis, structure, immobilization, and catalytic activity

The synthesis of novel ruthenium-based metathesis catalysts containing the saturated 1,3-bis(2,4,6-trimethylphenyl)-3,4,5,6-tetrahydropyrimidin-2-ylidene ligand, that is, [RuCl2(NHC)[=CH-2-(2-PrO)-5-NO(2)-C6H3]] (1) and [Ru(CF3COO)2(NHC)[=CH-2-(2-PrO)-5-NO2-C6H3]] (2) (NHC=1,3-bis(2,4,6-trimethylphenyl)-3,4,5,6-tetrahydropyrimidin-2-ylidene) is described. Both catalysts are highly active in ring-closing metathesis (RCM) and ring-opening cross-metathesis (ROCM). Compound 1 shows moderate activity in enyne metathesis. Compound 2 is not applicable to enyne metathesis since it shows high activity in the cyclopolymerization of diethyl dipropargylmalonate (DEDPM). Poly(DEDPM) prepared by the action of 2 consists of 95% five-membered rings, that is, poly(cyclopent-1-enevinylene)s, and 5 % of six-membered rings, that is, poly(cyclohex-1-ene-3-methylidene)s. The polymerization proceeds in a nonliving manner and results in polyenes with broad polydispersities (1.9< or =PDI< or =2.3). Supported analogues of 2 were prepared by immobilization on hydroxymethyl-Merrifield resin and a monolithic support derived from ring-opening-metathesis polymerization (ROMP). Catalyst loadings of 1 and 2.5%, respectively, were obtained. Both supported versions of 2 showed excellent reactivity. With 0.24-2% of the supported catalysts, yields in RCM and ROCM were in the range of 76-100%. Leaching of ruthenium was low and resulted in Ru contaminations of the products of less than 0.000014% (0.14 ppm).     

Aqueous olefin metathesis

According to popular belief, oxygen and water are the natural enemies of organometallic reactions and therefore must be excluded rigorously from the reaction vessel. This belief is founded in the case of the highly reactive nucleophilic metal alkylidene complexes that were used in early catalytic olefin metathesis. However, owing to the high stability of the ruthenium carbene complexes introduced by Grubbs, metathesis in water has become reality.     

Ruthenium olefin metathesis catalysts with modified styrene ethers: influence of steric and electronic effects

A series of olefin metathesis catalysts with modified isopropoxybenzylidene ligands were synthesised, and the effects of ligands on the rate of metathesis investigated. Increased steric hinderance ortho to the isopropoxy group enhanced reaction rates. In the case of N-heterocyclic carbene complexes, decreasing electron density at both the chelating oxygen atom and the RuC bond accelerated reaction rates appreciably. Catalysts containing a tricyclohexylphosphane ligand, followed the same trend with regard to benzylidene electrophilicity, while higher electron density at oxygen enhanced reaction rates.     

Mechanistically inspired catalysts for enantioselective desymmetrizations by olefin metathesis

In asymmetric olefin metathesis reactions, the addition of halide additives is often required to augment enantioselectivities, despite the fact that the additives result in catalysts with diminished reactivities. The preparation of new chiral Ru-based catalysts was accomplished by exploiting previously reported mechanistic studies. The catalysts possess a high level of reactivity and successfully induce high levels of asymmetry in desymmetrization reactions without the use of halide additives.     

Template synthesis of benzannulated N-heterocyclic carbene ligands

The reaction of 2-azidophenyl isocyanide (7) with [M(CO)(5)(thf)] (M=Cr, W) yields the isocyanide complexes [M(CO)(5)(7)] (M=Cr 8, M=W 9). Complexes 8 and 9 react with tertiary phosphines such as triphenylphosphane at the azido function of the isocyanide ligand to give the 2-triphenylphosphiniminophenyl isocyanide complexes 10 (M=Cr) and 11 (M=W). The polar triphenylphosphiniminophenyl function in complexes 10 and 11 can be hydrolyzed with H(2)O/HBr to afford triphenylphosphane oxide and the complexes containing the unstable 2-aminophenyl isocyanide ligand. This ligand spontaneously cyclizes by intramolecular nucleophilic attack of the primary amine at the isocyanide carbon atom to yield the 2,3-dihydro-1H-benzimidazol-2-ylidene complexes 12 (M=Cr) and 13 (M=W). Double deprotonation of the cyclic NH,NH-carbene ligands in 12 and 13 with KOtBu and reaction with two equivalents of allyl bromide yields the N,N'-dialkylated benzannulated N-heterocyclic carbene complexes 14 (M=Cr) and 15 (M=W). The molecular structures of complexes 9 and 11-15 were confirmed by X-ray diffraction studies.     

Synthesis and reactivity of homogeneous and heterogeneous ruthenium-based metathesis catalysts containing electron-withdrawing ligands

The synthesis and heterogenization of new Grubbs-Hoveyda type metathesis catalysts by chlorine exchange is described. Substitution of one or two chlorine ligands with trifluoroacetate and trifluoromethanesulfonate was accomplished by reaction of [RuCl(2)([double bond]CH-o-iPr-O-C(6)H(4))(IMesH(2))] (IMesH(2) = 1,3-bis(2,4,6-trimethylphenyl)-4,5-dihydroimidazol-2-ylidene) with the silver salts CF(3)COOAg and CF(3)SO(3)Ag, respectively. The resulting compounds, [Ru(CF(3)SO(3))(2)([double bond]CH-o-iPr-O-C(6)H(4))(IMesH(2))] (1), [RuCl(CF(3)SO(3))([double bond]CH-o-iPr-O-C(6)H(4))(IMesH(2))] (2), and [Ru(CF(3)CO(2))(2)([double bond]CH-o-iPr-O-C(6)H(4))(IMesH(2))] (3) were found to be highly active catalysts for ring-closing metathesis (RCM) at elevated temperature (45 degrees C), exceeding known ruthenium-based catalysts in catalytic activity. Turn-over numbers (TONs) up to 1800 were achieved in RCM. Excellent yields were also achieved in enyne metathesis and ring-opening cross metathesis using norborn-5-ene and 7-oxanorborn-5-ene-derivatives. Even more important, 3 was found to be highly active in RCM at room temperature (20 degrees C), allowing TONs up to 1400. Heterogeneous catalysts were synthesized by immobilizing [RuCl(2)([double bond]CH-o-iPr-O-C(6)H(4))(IMesH(2))] on a perfluoroglutaric acid derivatized polystyrene-divinylbenzene (PS-DVB) support (silver form). The resulting supported catalyst [RuCl(polymer-CH(2)-O- CO-CF(2)-CF(2)-CF(2)-COO)([double bond]CH-o-iPr-O-C(6)H(4))(IMesH(2))] (5) showed significantly reduced activities in RCM (TONs = 380) compared with the heterogeneous analogue of 3. The immobilized catalyst, [Ru(polymer-CH(2)-O-CO-CF(2)-CF(2)-CF(2)-COO)(CF(3)CO(2))([double bond]CH-o-iPr-O-C(6)H(4))(IMesH(2))] (4) was obtained by substitution of both Cl ligands of the parent Grubbs-Hoveyda catalyst by addition of CF(3)COOAg to 5. Compound 4 can be prepared in high loadings (160 mg catalyst g(-1) PS-DVB) and possesses excellent activity in RCM with TONs up to 1100 in stirred-batch RCM experiments. Leaching of ruthenium into the reaction mixture was unprecedentedly low, resulting in a ruthenium content <70 ppb (ng g(-1)) in the final RCM-derived products.     

Comparative experimental and EXAFS studies in the Mizoroki-Heck reaction with heteroatom-functionalised N-heterocyclic carbene palladium catalysts

A study on the Mizoroki-Heck coupling of selected aryl bromides with acrylates catalysed by a series of Pd complexes of bidentate pyridyl-, picolyl-, diphenylphosphinoethyl- and diphenylphosphinomethyl-functionalised N-heterocyclic carbene (NHC) is reported. The observed activity is dependent on the type of solvent and base used and the nature of the "classical" donors of the mixed-donor bidentate ligand and its bite angle. A mechanistic model is presented for the pyridine-functionalised NHC complexes based on an in situ EXAFS study under dilute catalyst conditions (2 mM Pd). The model involves pre-dissociation of the pyridine functionality and oxidative addition of ArBr in the early stages of the reaction, as well as formation of monomeric and dimeric Pd species at the time of substrate conversion.     

Oxygen‐chelated indenylidene ruthenium catalysts for olefin metathesis

Olefin metathesis is a transition metal‐mediated transformation that rearranges the carbon atoms of the carbon–carbon double bond of olefins. This reaction has become one of the most important and powerful reactions. Therefore development of new, well‐defined, highly active and selective catalysts is very desirable and a valuable goal. This mini‐review mainly introduces the development of ruthenium catalysts in olefin metathesis highlighting oxygen‐chelated indenylidene ruthenium catalysts. Applying an alkoxyl group on the indenylidene ligand fragment can generate the Ru ? O chelating bond. Additionally, various modifications of the ligand as well as the catalytic activity for ring‐closing metathesis reaction and selectivity of cross metathesis reaction are overviewed. Finally, the perspectives on the development of new catalysts are summarized. Copyright © 2015 John Wiley & Sons, Ltd.     

Mechanistic insights into the cis-trans isomerization of ruthenium complexes relevant to catalysis of olefin metathesis

The mechanism of the trans to cis isomerization in Ru complexes with a chelating alkylidene group has been investigated by using a combined theoretical and experimental approach. Static DFT calculations suggest that a concerted single‐step mechanism is slightly favored over a multistep mechanism, which would require dissociation of one of the ligands from the Ru center. This hypothesis is supported by analysis of the experimental kinetics of isomerization, as followed by ¹H NMR spectroscopy. DFT molecular dynamics simulations revealed that the variation of geometrical parameters around the Ru center in the concerted mechanism is highly uncorrelated; the mechanism actually begins with the transformation of the square‐pyramidal trans isomer, with the Ru?CHR bond in the apical position, into a transition state that resembles a metastable square pyramidal complex with a Cl atom in the apical position. This high‐energy structure collapses into the cis isomer. Then, the influence of the N‐heterocyclic carbene ligand, the halogen, and the chelating alkylidene group on the relative stability of the cis and trans isomers, as well as on the energy barrier separating them, was investigated with static calculations. Finally, we investigated the interconversion between cis and trans isomers of the species involved in the catalytic cycle of olefin metathesis; we characterized an unprecedented square‐pyramidal metallacycle with the N‐heterocyclic carbene ligand in the apical position. Our analysis, which is relevant to the exchange of equatorial ligands in other square pyramidal complexes, presents evidence for a remarkable flexibility well beyond the simple cis–trans isomerization of these Ru complexes.     

N-heterocyclic carbene and phosphine ruthenium indenylidene precatalysts: a comparative study in olefin metathesis

Kinetic studies on ring-closing metathesis of unhindered and hindered substrates using phosphine and N-heterocyclic carbene (NHC)-containing ruthenium-indenylidene complexes (first and second generation precatalysts, respectively) have been carried out. These studies reveal an appealing difference, between the phosphine and NHC-containing catalysts, associated with a distinctive rate-determining step in the reaction mechanism. These catalysts have been compared with the benzylidene generation catalysts and their respective representative substrates. Finally, the reaction scope of the two most interesting precatalysts, complexes that contain tricyclohexylphosphine and 1,3-bis(2,4,6-trimethylphenyl)imidazol-2-ylidene (SIMes), has been investigated for the ring-closing and enyne metathesis for a large range of olefins. Owing to their high thermal stability, the SIMes-based indenylidene complexes were more efficient than their benzylidene analogues in the ring-closing metathesis of tetrasubstituted dienes. Importantly, none of the indenylidene precatalysts were found to be the most efficient for all of the substrates, indeed, a complementary complex-to-substrate activity relationship was observed.     

In an attempt to provide a user's guide to the galaxy of benzylidene, alkoxybenzylidene, and indenylidene ruthenium olefin metathesis catalysts

The data reported in this paper demonstrate that great care must be taken when choosing an appropriate catalyst for a given metathesis reaction. First-generation catalysts were found to be useful in the metathesis of sterically unhindered substrates. Second-generation catalysts (under optimised conditions) showed good to excellent activities toward sterically hindered and electron-withdrawing group (EWG)-substituted alkenes that do not react using the first-generation complexes. A strong temperature effect was noted on all of the reactions tested. Interestingly, attempts to force a reaction by increasing the catalyst loading were much less effective. Therefore, when possible, it is suggested that metathesis transformations should be carried out with a second-generation catalyst at 70 degrees C in toluene. However, different second-generation catalysts proved to be optimal for different applications and no single catalyst outperformed all others in all cases. Nevertheless, some empirical rules can be deduced from the model experiments, providing preliminary hints for the selection of the optimal catalysts.