Electroinitiated Anionic Polymerization of Vinyl Monomers

Abstract

Polarographic reduction and electrolytically initiated anionic polymerization of various monomers have been investigated with tetra-n-butylammonium perchlorate in dimethoxyethane.     

Ionic Polymerization of Vinyl Aromatic Monomers

The ionic polymerization of vinyl monomers possessing aromatic and heterocyclic functional groups has not been studied in any systematic fashion. Only in a few isolated cases have detailed mechanistic and structural studies been reported. The anionic polymerization of a number of vinylanthracene monomers has recently been investigated and some rationalization of this system is presented. The cationic and anionic polymerization of the N-, 3-, and 2-vinylcarbazole series of monomers is discussed in some detail. The important role of vinyl aromatic/vinyl heterocyclic monomers, i.e., diphenylethylene and the vinylcarbazoles, in elucidating the mechanistic aspects of cationic polymerization, “change transfer” polymerization, and photoionic polymerization is considered.     

乙烯基二联苯单体的螺旋选择性自由基聚合

为了深入理解乙烯基二联苯单体自由基聚合过程中的手性传递,进行了手性单体(+)-2-[(S)-异丁氧羰基-5-(4′-己氧基苯基)苯乙烯、非手性单体2-丁氧羰基-5-(4′-己氧基苯基)苯乙烯的均聚反应及它们二者的共聚反应,探讨了聚合温度和溶剂性质对手性单体均聚物旋光活性、手性单体含量对共聚物旋光活性以及聚合反应溶剂的超分子手性对共聚物旋光活性的影响.研究发现,降低聚合温度、采用液晶性反应介质有利于得到旋光度大的聚合物;少量手性单体的引入即可诱导共聚物形成某一方向占优的螺旋构象,比旋光度随手性单体的含量增加呈线性增长;在胆甾相液晶中制备的非手性单体聚合物不具有光学活性.这些结果表明,该类乙烯基二联苯聚合物具有动态螺旋构象,其光学活性主要依赖于主链的立构规整度和侧基不对称原子的手性.     

Stereoselective Polymerization of Aromatic Vinyl Polar Monomers

Polar vinyl polymers, a class of polymers with polar groups as side chains, have significant advantages over conventional nonpolar polyolefin materials in terms of viscosity, toughness, interfacial properties (dyeability and printability), and compatibility with solvents or other polymers. Among them, aromatic polar vinyl polymers are of interest because of their good heat resistance properties. In addition, stereoselective polymerization of aromatic polar vinyl monomers has been rapidly developed because the steric structure of the polymer has a significant impact on its physical properties. In this paper, we review the research progress of stereoselective polymerization catalysts for aromatic polar vinyl monomers in recent years, discuss in detail the influence of ligand structure, electronic effect of substituents, spatial site resistance effect, central rare earth metal species and polymerization solvents on the activity and stereoselectivity of polymerization reactions, and explore the possible mechanism of polymerization reaction.     

Gamma-Ray Induced Polymerization of Vinyl Monomers in Bagasse

Vinyl monomers such as vinyl acetate, vinyl chloride, methyl methacrylate and styrene etc., can be polymerized without catalyst into the composites of bagasse material by gamma-radiation induced in situ liquid polymerization process. The fundamental factors, such as polymerization-rate, effect of swelling agent, molecular weight of vinyl polymers and graft reaction between bagasse cellulose and vinyl polymers, have been investigated and discussed. The use of suitable low G-value polar swelling agents and the application of suitable gamma dose-rate are two key factors found to control the smooth in situ liquid polymerization system of vinyl monomers in bagasse.     

Polymerization of Vinyl and Diene Monomers in Canal Complexes

In recent years the so-called biomimetic chemistry has received much attention. Studies of the preparation and design of functional polymers which can serve as polymeric enzyme and nucleic acid models appear to be a particularly rapidly expanding areas of research. These polymers and their aggregates should require highly specific sites or, in other words, atmospheres around them, in order to facilitate a series of selective reactions under conditions similar to those of biochemical environments. In this connection, molecular design of certain three-dimensional, highly organized spaces which consist of various sorts of molecular aggregates and can incorporate definite molecules in a specified way within their space are of interest for performing controlled organic and polymer synthetic reactions.     

Radical Polymerization of Vinyl Monomers in Porous Organic Cages

The radical polymerization of vinyl monomers was performed in a tetrahedral imine‐linked organic cage with extrinsic porosity (CC3). Because of its dynamic and responsive packing structure, CC3 endowed the polymerization with specific behaviors. The adsorption of styrene triggered a change in the CC3 assembly, resulting in a monomer arrangement that was suitable for polymerization within the host matrix. The polymerization reaction was strongly dependent on the crystallinity of CC3 and was promoted by amorphization of the host in a cooperative manner, which is not possible with conventional rigid porous materials. Furthermore, CC3 can recognize the polarity of substrates, and thus polar monomers, such as methyl methacrylate and acrylonitrile, could not induce the structural changes in CC3 that are required for polymerization. This monomer specificity governed by the flexibility of CC3 is useful to the prevent incorporation of unfavorable monomers into the polymeric products.     

High‐Speed Living Polymerization of Polar Vinyl Monomers by Self‐Healing Silylium Catalysts

This contribution describes the development and demonstration of the ambient‐temperature, high‐speed living polymerization of polar vinyl monomers (M) with a low silylium catalyst loading (≤ 0.05 mol % relative to M). The catalyst is generated in situ by protonation of a trialkylsilyl ketene acetal (^RSKA) initiator (I) with a strong Brønsted acid. The living character of the polymerization system has been demonstrated by several key lines of evidence, including the observed linear growth of the chain length as a function of monomer conversion at a given [M]/[I] ratio, near‐precise polymer number‐average molecular weight (M_n, controlled by the [M]/[I] ratio) with narrow molecular weight distributions (MWD), absence of an induction period and chain‐termination reactions (as revealed by kinetics), readily achievable chain extension, and the successful synthesis of well‐defined block copolymers. Fundamental steps of activation, initiation, propagation, and catalyst “self‐repair” involved in this living polymerization system have been elucidated, chiefly featuring a propagation “catalysis” cycle consisting of a rate‐limiting C? C bond formation step and fast release of the silylium catalyst to the incoming monomer. Effects of acid activator, catalyst and monomer structure, and reaction temperature on polymerization characteristics have also been examined. Among the three strong acids incorporating a weakly coordinating borate or a chiral disulfonimide anion, the oxonium acid [H(Et₂O)₂]⁺[B(C₆F₅)₄]^? is the most effective activator, which spontaneously delivers the most active R₃Si⁺, reaching a high catalyst turn‐over frequency (TOF) of 6.0×10³ h^?1 for methyl methacrylate polymerization by Me₃Si⁺ or an exceptionally high TOF of 2.4×10⁵ h^?1 for n‐butyl acrylate polymerization by iBu₃Si⁺, in addition to its high (>90 %) to quantitative efficiencies and a high degree of control over M_n and MWD (1.07–1.12). An intriguing catalyst “self‐repair” feature has also been demonstrated for the current living polymerization system.     

氧气分子参与的乙烯基单体自由基聚合

尽管被公认在自由基聚合中往往起着缓聚、阻聚或链转移的作用,越来越多的结果表明,在某些情况下,如高温、高压,或当某些催化剂存在时,氧气分子(O2)可以参与甚至加速乙烯基单体的自由基聚合。本文综述了上世纪90年代以来,O2参与的乙烯基单体的热/光诱导自由基聚合、化学引发自由基聚合、氧载体催化自由基聚合以及可逆加成-断裂链转移自由基聚合。以上结果表明,在上述情况下,O2,作为一个普通不饱和单体,可以与苯乙烯、甲基丙烯酸甲酯等乙烯基单体形成交替共聚物(聚过氧化物),而此类聚过氧化物均可裂解为自由基。     

稀土金属配合物催化芳香型乙烯基极性单体立构选择性聚合

鉴于聚合物的立构规整度对其性能起着重要的作用,如何提高聚合物的立构规整度一直以来都是配位聚合领域的重要研究课题。经过几十年的发展,配位聚合已经在 α-烯烃、苯乙烯、共轭二烯烃等非极性烯烃单体的立构选择性聚合方面取得了巨大的成就。但非极性聚烯烃材料表面性能差,而化学性质稳定,难以被后功能化。因此通过极性单体的立构选择性聚合将极性基团引入聚烯烃大分子链中对于提高其性能具有非常重要的意义。然而,在传统的配位聚合中,单体上的极性原子(基团)易于向金属中心配位,导致催化体系失去立构选择性,甚至失去活性。因此选择合适的配体、金属种类与极性单体组合的策略对实现立构选择性聚合至关重要。近年来,针对2-乙烯基吡啶、含杂原子苯乙烯衍生物以及硼氮杂芳香型乙烯基单体的定向聚合,开发了大量的稀土金属配合物催化体系,聚合物的立构规整度取得了较大的突破,同时对单体上极性原子在聚合中的作用也有了新的认识。本综述以单体种类为主线,详细讨论了配体的结构、取代基的电子效应、空间位阻效应、中心稀土金属种类和聚合溶剂等对催化剂聚合活性、立构选择性的影响,并探讨可能的聚合反应机理。     

玻璃纤维表面的乙烯基单体接枝聚合

用玻璃纤维表面处理剂ＭＡＣ处理玻璃纤维后，再进行臭氧处理，使玻璃纤维的表面产生活性中心，引发苯乙烯、甲基丙烯酸甲酯、及丙烯酸等乙烯基单体在玻璃纤维表面上接枝聚合。接枝纤维的密度减小，对水的浸润性下降，红外光谱及扫描电镜观察证明玻璃纤维表面上接枝聚合物的存在。     

Neodymium Catalyst for the Polymerization of Dienes and Polar Vinyl Monomers

Ziegler–Natta catalysts have played a major role in industry for the polymerization of dienes and vinyl monomers. However, due to the deactivation of the catalyst, this system fails to polymerize polar vinyl monomers such as vinyl acetate, methyl methacrylate, and methyl acrylate. Herein, a catalytic system composed of NdCl₃⋅3TEP/TIBA is reported, which promotes a quasi‐living polymerization of dienes and is also active for the homopolymerization of polar vinyl monomers. Additionally, this catalytic system generates polymyrcene‐b‐polyisoprene and poly(myrcene)‐b‐poly(methyl methacrylate) diblock copolymers by sequential monomer addition. To encourage the replacement of petroleum‐based polymers by environmentally benign biobased polymers, polymerization of β‐myrcene is demonstrated with a catalytic activity of ≈106 kg polymer mol Nd⁻¹ h⁻¹.     

A New Redox Initiating System for the Polymerization of Vinyl Monomers

Abstract

A new redox system, dioxane-ascorbic acid, has been investigated for the homopolymerization of vinyl monomers. Detailed kinetic studies on the aqueous polymerization of acrylamide by this initiating system have been done iodometrically at 35 ± 0.2°C. The effect of various additives, such as organic solvents, inorganic salts, surfactants, etc., on the rate of polymerization has been studied. The retardation constants for organic solvents have been evaluated by the “intercept method.” The overall energy of activation has been found to be 8.75 kcal/deg/mol, within the temperature range 25–45°C. A suitable mechanism has been suggested. The following rate expression: R_p α [acrylamide]^1.0 [dioxane]^1.0 [ascorbic acid]⁰, has been observed.     

Vinyl Polymerization 204. Initiation Mechanism of the Radical Polymerization of Vinyl Monomers by p-Methoxy -p'-nitrobenzoyl Peroxide and Tertiary Amines

Abstract

A study of the reaction of tertiary amines with p-methoxy-p'-nitrobenzoyl peroxide in the presence of styrene was made in benzene. Anisic acid and p-nitrobenzoic acid were obtained from the reaction product. Using gas chromatography, the molar ratio of the amount of the above two acids was measured and classified into three types, according to the kind of amine used. From the results the reaction mechanism was discussed, and it was concluded that the oxygen which stands adjacent to the p-methoxybenzoyl group may be charged more positively and may be the more predominantly attacked by tertiary amine.     

多官能团乙烯基单体原子转移自由基交联聚合机理

乙烯基单体;原子转移自由基交联聚合;聚合机理;交联网络     

Emulsion Polymerization of Vinyl Monomers in Presence of Chitosan with Peroxide Groups

Peroxychitosans with ditertiary peroxide fragments were synthesized via radical reactions of chitosan and 5-tert-butylperoxy-5-methyl-l-hexen-3-in. They can be used as macroinitiators and coemulsifiers for emulsion polymerization of vinyl monomers. It is shown that peroxychitosans are grafted to the surface of latex particles and impart antibacterial properties to emulsion polymer.     

Sulfur-Containing Vinyl Monomers. XIX. Radical Polymerization of 2-Mercaptobenzothiazolyl Methacrylate

2-Mercaptobenzothiazolyl methacrylate (MBTM) was synthesized by the reaction of 2-mercaptobenzothiazole and methacrylyl chloride in tetrahydrofuran at -18°C. MBTM was found to polymerize in the presence of 2,2′-azobisisobutyronitrile (AIBN), n-BuLi, and UV light. From the kinetic studies of radical polymerization of MBTM with AIBN in benzene at 60°C, the overall activation energy was determined to be 18.9 kcal/mole, and the rate of polymerization (R) was expressed as R_p = k[AIBN]^0.5 [MBTM], where k is the overall polymerization rate constant. From these results this polymerization was confirmed to proceed via an ordinary radical mechanism. This monomer (M₂) was also copolymerized radically with styrene (M₁) at 60°C, and the resulting copolymerization parameters were determined as r₁ = 0.042, r₂ = 0.20, Q₂ = 4.09, and e₂ = 1.39. The thermal stability and the photodegradation behavior of the polymers were examined, and they were compared with those of the related polymers.     

Grafting Vinyl Monomers onto Silk Fibers: Graft Copolymerization of Vinyl Monomers onto Silk Using the Vanadyl Acetylacetonate Complex

Abstract

The graft copolymerization of methyl methacrylate (MMA) onto mulberry silk fibers was studied in aqueous solution using the acetylacetonate oxovanadium (IV) complex. The rate of grafting was investigated by varying the concentration of the monomer and the complex, the acidity of the medium, the solvent composition of the reaction medium, the surfactants, and the inhibitors. The graft yield increases with increasing concentration of the initiator up to 8.75 × 10^?5 mol/L, of the monomer up to 0.5634 mol/L, and thereafter it decreases. Among the various vinyl monomers studied, MMA was found to be most suitable for grafting. Grafting increases with increasing concentration of HCIO₄ and with increasing temperature. Inhibitors like picryl chloride and hydroquinone significantly decrease the extent of grafting. Alcoholic solvents at a solvents/water ration of 10:90 seem to constitute the most favorable medium for grafting. A suitable reaction scheme has been proposed, and the activation energy calculated from the Arrhenius plots.     

Sulfur-Containing Vinyl Monomers. XV. Kinetic Study of Radical Polymerization of Vinyl Mercaptobenzothiazole and Its Copolymerization

A kinetic study of radical polymerization of vinyl mercaptobenzothiazole (VMBT) with α,α′-azobisisobutyonitrile (AIBN) at 60°C was carried out. The rate of polymerization (R_p) was found to be expressed by the rate equation: R_p = k[AIBN]^0.5 [VMBT]^1.0, indicating that the polymerization of this monomer proceeds via an ordinary radical mechanism. The apparent activation energy for overall polymerization was calculated to be 20.9 kcal/mole. Moreover, this monomer was copolymerized with methyl methacrylate, acrylonitrile, vinyl acetate, phenyl vinyl sulfide, maleic anhydride, and fumaronitrile at 60°C. From the results obtained, the copolymerization parameters were determined and discussed.     

后过渡金属催化降冰片烯加成聚合

综述了后过渡金属催化剂催化降冰片烯加成聚合的研究进展。主要介绍了Ni、Pd、Co三种金属催化剂各自的结构以及其催化降冰片烯聚合的特点,同时也阐述了Ni、Pd催化剂催化降冰片烯聚合的机理。