Synthesis and Characterization of Star‐Shaped Diblock Poly(ε‐caprolactone)/Poly(ethylene oxide) Copolymers

Summary: Star‐shaped hydroxy‐terminated poly(ε‐caprolactone)s (ssPCL), with arms of different lengths, were obtained by ring‐opening polymerization (ROP) of ε‐caprolactone initiated by pentaerythritol, and were condensed with α‐methyl‐ω‐(3‐carboxypropionyloxy)‐poly(ethylene oxide)s ( = 550–5 000) to afford four‐armed PCL‐PEO star diblock copolymers (ssPCL‐PEO). The polymers were characterized by ¹H and ¹³C NMR spectroscopy and size‐exclusion chromatography (SEC). The melting behavior of ssPCLs was studied by differential scanning calorimetry (DSC). X‐ray diffraction and DSC techniques were used to investigate the crystalline phases of ssPCL‐PEOs.

The part of the synthesis of four‐armed star‐shaped diblock poly(ε‐caprolactone)‐poly(ethylene oxide) copolymers as described.     

Lipase‐Catalyzed Ring‐Opening Polymerization of 3(S)‐sec‐Butylmorpholine‐2,5‐dione

Lipase‐catalyzed ring‐opening bulk polymerizations of 3(S)‐sec‐butylmorpholine‐2,5‐dione (BMD) were investigated. Selected commercial lipases were screened as catalysts for BMD polymerization at 110°C. Polymerizations catalyzed with 10 wt.‐% of lipase PPL and PC result in BMD conversions of about 70% and in molecular weights of the products ranging from 5 500 to 10 700. Lipases MJ, CR and ES showed lower catalytic activities for the polymerization of BMD. Poly(3‐sec‐butylmorpholine‐2,5‐dione) has a carboxylic acid group at one end and a hydroxy group at the other end. During the polymerization racemization of the isoleucine residue takes place. Lipase PPL was selected for a more detailed study. The apparent rate of polymerization increases with increasing PPL concentration when the polymerization temperature is 110°C. When the PPL concentration is 5 and 10 wt.‐% with respect to the monomer, a conversion of about 70% is reached after 5 d and 3 d, respectively, while for a PPL concentration of 1 wt.‐% the conversion is less than 7% even after 6  d. High concentrations of PPL (10 wt.‐%) result in high M_n values (< 4  d). The highest molecular weight poly(BMD), M_n = 19 900, resulted from a polymerization conducted at 120°C with 5 wt.‐% PPL for 6 d. The general trend observed by varying the polymerization temperature is as follows: (i) monomer conversion and M_n increase with increasing reaction temperature from 110 to 125°C, (ii) monomer conversion and M_n decrease with an increase in reaction temperature from 125 to 130°C. Water content was found to be an important factor that controls both the conversion and the molecular weight. With increasing water content, enhanced polymerization rates are achieved while the molecular weight of poly(BMD) decreases.     

聚乙二醇单甲醚-聚L-赖氨酸嵌段共聚物的合成及其表征

以L-赖氨酸为原料,先制备Nε-苄氧羰基-L-赖氨酸,光气法合成Nε-苄氧羰基-L-赖氨酸-N-羧酸酐[Lys-(Z)-NCA]。以聚乙二醇单甲醚(MPEG)为原料,制备了端氨基聚乙二醇单甲醚(MPEG-NH2),并以此为大分子引发剂,在氯仿中引发Lys-(Z)-NCA开环聚合,经无水溴化氢脱苄,合成不同组成和分子量的聚乙二醇单甲醚-聚L-赖氨酸嵌段共聚物。用IR1、H-NMR、GPC、DSC等对共聚物结构进行了表征。结果表明:MPEG-NH2引发Lys-(Z)-NCA开环聚合得到的是嵌段共聚物,通过1H-NMR谱计算得到了共聚物MPEG-PLL-1、MPEG-PLL-2、MPEG-PLL-3、MPEG-PLL-4中PLL链段的摩尔分数分别为0.553、0.795、0.848、0.861,共聚物数均分子量(Mn)分别为2.3×104、6.1×104、8.6×104、9.5×104。     

Synthesis and Characterization of α,ω‐Heterofunctional Poly(ethylene oxide) Macromonomers

A novel α,ω‐heterofunctional poly(ethylene oxide) (PEO) macromonomer possessing methacryloyl and thienyl end groups was prepared by ring‐opening polymerization of ethylene oxide initiated by potassium thienylethoxide and termination of the living PEO ends with methacryloyl chloride. Incorporation of methacryloyl and thienyl groups was confirmed by free‐radical and oxidative polymerization processes, respectively, and by means of ¹H NMR analysis.

     

苯乙烯和乙烯基三甲氧基硅烷嵌段共聚物的制备及表征

以苯乙烯(St)为单体,二硫代萘甲酸异丁腈酯(CPDN)为可逆-加成断裂链转移聚合(RAFT)试剂,合成大分子链转移剂,再加入不同质量的乙烯基三甲氧基硅烷(A171),得到嵌段比不同的共聚物P(St-b-A171)。通过核磁共振谱仪1 H-NMR、凝胶渗透色谱GPC、动态力学分析仪DMA和接触角等方法对P(St-b-A171)结构进行了表征。结果表明:随着nSt/nA171嵌段比从1∶0.15增加到1∶0.45,P(St-b-A71)数均分子量从10400增加到14000,PDI指数从1.42增加到1.58;聚合物成膜后接触角由78.4°增加到89.6°。通过以上分析得出结论,RAFT合成嵌段共聚物的嵌段比对P(St-b-A171)性能有较大影响。     

Shape Memory Properties in Poly(ethylene oxide)–Poly(ethylene terephthalate) Copolymers

Memory effects of several copolymers of poly(ethylene oxide) (PEO) and poly(ethylene terephthalate) (PET) were illustrated with photos, determined with shrinkage experiments and characterized by the recovery of samples to their original figures. Copolymers of appropriate composition could undertake an approximately full recovery which is tightly related to the annealing temperature at which shrinkage of samples occurs to some extent. Melting and recrystallization of PEO segments may be responsible for the memory effect. The memory properties of samples almost kept unchanged after many fatigue cycles (e.g. 15–20 cycles), which could make these copolymers useful in practical applications as novel shape memory materials. © 1997 John Wiley & Sons, Ltd.     

Multi‐Morphological Complex Aggregates Formed from Amphiphilic Poly(ethylene oxide)‐block‐Polydimethylsiloxane‐block‐Poly(ethylene oxide) Triblock Copolymers

Summary: Amphiphilic triblock copolymers (PEO_x‐b‐PDMS_y‐b‐PEO_x) with different block lengths were synthesized and multi‐morphological complex crew‐cut, star‐like, and short‐chain aggregates were prepared by self‐assembly of the given copolymers. The morphologies and dimensions of the aggregates can be well controlled by variation of the preparation conditions. TEM, SEM, FFR‐TEM, and LLS studies show the resulting morphologies range from LCMs, unilamellar or multilayer vesicles, LCVs, porous spheres to nanorods.

TEM images of the vesicles formed from PEO‐b‐PDMS‐b‐PEO.     

Poly(ferrocenylsilane)‐block‐Polylactide Block Copolymers

A PFS/PLA block copolymer was studied to probe the effect of strong surface interactions on pattern formation in PFS block copolymer thin films. Successful synthesis of PFS‐b‐PLA was demonstrated. Thin films of these polymers show phase separation to form PFS microdomains in a PLA matrix, and ultrathin films (<5 nm) formed SINPATs on silicon and mica. The SINPATs consisted of strongly surface‐adsorbed PLA blocks on top of which the PFS blocks dewetted into sphere‐like features. The lateral spacing between these features was regular, and was typically much larger than the length scale associated with regular block copolymer phase separation.

     

Synthesis and Characterization of Novel Hydrophobically End-Capped Poly(ethylene oxide)s [PEOs]

We report on the synthesis and characterization of a novel hydrophobically modified end-capped poly(ethylene oxide)s. The end-capping agent of this polymer was designed and synthesised from a renewable resource material namely, gallic acid (i.e. 3,4,5-trihydroxybenzoic acid), the byproduct of tannin industry. The hydroxyl groups at 3, 4 and 5 positions of gallic acid provide an opportunity for varying the hydrophobicity of the compound. The hydrophobic end-capping compound, 3,4,5-tridodecyloxy bezoylazide was prepared from gallic acid and PEGs with different chain lengths (of number average molecular weights, 10000 and 35000 g/mol) were end-capped using 3,4,5-tridodecyloxybenzoyl azide. The quantitative analysis of end-capping in the polymers was demonstrated by ¹H-NMR spectroscopy and the rheological studies were carried out in the surfactant solutions.     

聚(对苯二甲酸丁二醇酯-co-对苯二甲酸环己烷二甲醇酯)-b-聚乙二醇嵌段共聚物的合成与表征

用熔融缩聚法合成了一系列聚(对苯二甲酸丁二醇酯-co-对苯二甲酸环己烷二甲醇酯)-b-聚乙二醇嵌段共聚物(PBCG),用NMR,GPC,DSC,TGA及力学性能测试等方法表征了材料的结构与性能.GPC分析显示,共聚物分子量均具有较为对称的单峰分布,多分散性指数低于1.70.¹³CNMR谱结果表明,随PCT摩尔分数(x_PCT)从10%增至60%,PBT平均序列长度由4.02降到1.41;而PCT平均序列长度则由1.17升至2.50,二者呈无规分布.受硬段平均序列长度及结晶能力影响,硬段熔点及结晶度在x_PCT为20%～30%处均达到最小值,可能是硬段间形成共晶所致.TGA分析显示,引入芳香族聚酯组分PCT确可提高材料的热稳定性.力学性能测试说明,降低结晶度有利于提高材料的断裂延伸率,相反,则有助于增强弹性模量,断裂强度及屈服强度.     

The Synthesis of Poly(ethylene oxide)-Block-Polybutylacrylate

ＴｈｅＳｙｎｔｈｅｓｉｓｏｆＰｏｌｙ（ｅｔｈｙｌｅｎｅｏｘｉｄｅ）┐Ｂｌｏｃｋ┐Ｐｏｌｙｂｕｔｙｌａｃｒｙｌａｔｅ＊＊ＳｕｐｐｏｒｔｅｄｂｙｔｈｅＮａｔｉｏｎａｌＮａｔｕｒａｌＳｃｉｅｎｃｅＦｏｕｎｄａｔｉｏｎｏｆＣｈｉｎａａｎｄＤｏｃｔｏｒａｌｆｏ...     

用聚乙二醇简便合成3-取代-1, 2, 3, 4-四氢吡啶并[3, 2-d]嘧啶-2, 4-二酮

用聚乙二醇作为可溶性聚合物载体和相转移催化剂高效简单的合成了1, 2, 3, 4-四氢吡啶并[3, 2-d]嘧啶类化合物。该合成路线为聚乙二醇与2, 3-吡啶二酸酐反应生成聚乙二醇支载的单酯1,接着1被转化成相应的聚乙二醇支载的酰基叠氮2,2经Curtius重排,与胺加成并同时关环给出目标产物,其总产率为84%-88%。     

Synthesis and Characterization of a Block Copolymer Containing Regioregular Poly(3‐hexylthiophene) and Poly(γ‐benzyl‐L‐glutamate)

Poly(3‐hexylthiophene)‐b‐poly(γ‐benzyl‐L ‐glutamate) (P3HT‐b‐PBLG) rod–rod diblock copolymer was synthesized by a ring‐opening polymerization of γ‐benzyl‐L ‐glutamate‐N‐carboxyanhydride using a benzylamine‐terminated regioregular P3HT macroinitiator. The opto‐electronic properties of the diblock copolymer have been investigated. The P3HT precursor and the P3HT‐b‐PBLG have similar UV–Vis spectra both in solution and solid state, indicating that the presence of PBLG block does not decrease the effective conjugation length of the semiconducting polythiophene segment. The copolymer displays solvatochromic behavior in THF/water mixtures. The morphology of the diblock copolymer depends upon the solvent used for film casting and annealing results in morphological changes for both films deposited from chloroform and trichlorobenzene.

     

Synthesis and Characterization of Novel Nanophase Hexagonal Poly(2,5‐dimethoxyaniline)

Novel nanophase hexagonal structured polyaniline (PANI) and poly(2,5‐dimethoxyanilines) (PDMA) were synthesized by oxidative polymerization involving the respective anilines and a mixture of ferric chloride and ammonium persulfate. The morphological, spectral and electrochemical characteristics of the polymers were determined from the results of SEM, FTIR, UV‐vis, TGA and cyclic voltammetry experiments. The hexagonal PANI and PDMA nanorods (15–200 nm diameter) exhibited very good thermal stabilities, losing only 10% of their weight on heating to 400 °C. Electrochemical data indicated a pernigraniline state of the polymers with formal potential, E°′, values of 394±6 mV and 400±1 mV, for PANI (conductance, C=0.37×10^?3 S) and PDMA (conductance, C=2.02×10^?3 S), respectively. The pernigraniline state was confirmed by sharp FTIR pernigraniline quinoidic peaks (PANI: 1414 cm^?1; PDMA: 1157 cm^?1), and UV‐vis absorption maxima at 340–370 nm (PANI) and 450–650 nm (PDMA) which are characteristic of charge transfer excitons of the quinoid structures of pernigraniline.     

Synthesis and Characterization of Block Copolymers of Poly(Butylenes Terephthalate-Co-Adipate)

The block copolyesters of poly(butylene terephthalate)(PBT) and poly(butylene adipate)(PBA) were prepared by a novel two-stage method. In the first stage, high molecular weight PBT and PBA were melt mixed in the presence of 1,4-butanediol at 275 °C. In the second stage, vacuum was applied to raise the molecular weight. The extent of transesterification was controlled by the proportion of 1,4-butanediol. The sequence distribution and the thermal properties of the block copolyesters were characterized by NMR and DSC respectively.     

Poly(2‐vinyl pyridine)‐block‐Poly(ethylene oxide) Featuring a Furan Group at the Block Junction—Synthesis and Functionalization

Furfuryl glycidyl ether (FGE) represents a highly versatile monomer for the preparation of reversibly cross‐linkable nanostructured materials via Diels–Alder reactions. Here, the use of FGE for the mid‐chain functionalization of a P2VP‐b‐PEO diblock copolymer is reported. The material features one furan moiety at the block junction, P2VP₆₈‐FGE‐b‐PEO₃₉₀, which can be subsequently addressed in Diels–Alder reactions using maleimide‐functionalized counterparts. The presence of the FGE moiety enables the introduction of dyes as model labels or the formation of hetero‐grafted brushes as shell on hybrid Au@Polymer nanoparticles. This renders P2VP₆₈‐FGE‐b‐PEO₃₉₀, a powerful tool for selective functionalization reactions, including the modification of surfaces.

     

Synthesis and Characterization of Poly(p-phenylene benzobisoxazole)/Poly(pyridobisimidazole) Block Copolymers

Poly(p-phenylene benzobisoxazole)/poly(pyridobisimidazole) block copolymers (PBO-b-PIPD) were prepared by introducing poly(pyridobisimidazole) (PIPD) moieties into the main chains of poly(p-phenylene benzobisoxazole) (PBO) in order to enhance its photostability. PBO and copolymer fibers were directly prepared from the polymerization solutions by dry-jet wet-spinning. Chemical structures and molecular chains arrangement of the block copolymers were characterized by Fourier transform infrared (FTIR) spectroscopy, solid-state ¹³C-NMR and wide angle X-ray diffraction (WAXD). Thermal stability of the copolymers was investigated by thermogravimetric analysis (TGA) in nitrogen. Thin films of PBO and copolymers were cast from methanesulfonic acid (MSA) solutions. Both the films and fibers were exposed to UV light to determine their photostability. Changes in the chemical structures and surface morphologies of the films were characterized by FTIR spectra and scanning electronic microscopy (SEM), respectively. After UV light exposure, the retention of strength for copolymer fibers is improved compared to PBO fibers. The results revealed that copolymers suffered less photodegradation in comparison with homopolymer. The mechanism for the improved photostability of the copolymers was discussed.     

Synthesis and Characterization of Amphiphilic Poly(caprolactone) Star Block Copolymers

Summary: Novel, star‐shaped, amphiphilic block copolymers composed of fully degradable poly(caprolactone) were synthesized by sequential addition polymerization. In the first step, four‐arm macroinitiators were produced by ring‐opening polymerization of caprolactone by initiation with pentaerythritol. Then, block copolymers were synthesized by sequential addition of 4‐(2‐benzyloxyethyl)‐ε‐caprolactone to the four‐arm macroinitiators. Star‐shaped, amphiphilic block copolymers containing poly(caprolactone)‐block‐poly[4‐(2‐hydroxyethyl)caprolactone] segments were obtained by catalytic debenzylation.

Four‐arm amphiphilic polycaprolactone star block copolymer.