Multiorganyltin Compounds. Designing a novel phosphate-selective carrier

A series of distannyl derivatives, 1–9 , were studied for their application as phosphate-selective carriers in polymer-based liquid membranes. A drastically different potentiometric behavior was observed depending on the distance between the tin(IV) coordinating centers and the ligands attached to them. Some of the compounds examined, i.e. (PhSnBr₂)₂CH₂( 1 ) and (Me₃SiCH₂SnCl₂CH₂)₂ ( 3 ) showed very high potentiometric selectivity towards phosphate over other lipophilic anions such as perchlorate and thiocyanate. Results indicate that (1) the optimal number of CH₂ groups between the Sn-centers are either one or three, (2) the electron-withdrawing power of the organic ligands attached to Sn-centers strongly influences the overall response towards phosphate, and (3) the steric effect of the organic substituents is important in the potentiometric selectivity observed.     

Novel Membrane Potentiometric Thiocyanate Sensor Based on Tribenzyltin(IV) Dithiocarbamate

A novel PVC membrane ion‐selective electrode based on tribenzyltin(IV) dithiocarbamate [Sn(IV)–TBDTB] as neutral carrier was developed for thiocyanate (SCN^?) determination. The electrode exhibits a near‐Nernstian response for SCN^? with a slope of 62.8±2.0 mV per decade over a wide concentration range 1.0×10^?1–2.0×10^?6 mol L^?1 and a detection limit of 1.0×10^?6 mol L^?1 in MES–NaOH buffer, pH 6.0, at 25 °C. The electrode prepared with 1.5 wt.% Sn(IV)–TBDTB, 32.5 wt.% PVC and 66.0 wt.% 2‐nitrophenyloctyl ether (o‐NPOE) shows optimal response characteristics. Anti‐Hofmeister selectivity sequence for a series of anions shown by the electrode was as follows: SCN^?>Sal^?>I^?>ClO >phCOO^?>CH₃COO^?>Br^?>Cl^?>NO >NO >Citrate>SO₄^2?. The useful pH range for the electrode was found to be 3–7 with a response time 30–40 s. The electrode has been used for direct determination of thiocyanate in wastewater with satisfactory results.     

Soluble Polystyrenes Functionalized by Triorgano[(1‐oxoalkyl)oxy]stannanes (=Triorganotin Carboxylates): Synthesis,Structure, and Anion‐Recognition Characteristics

Polystyrene copolymers of the type ( P −H)_1−x( P −(CH₂)_n−COOSnR₃)_x containing [(1‐oxoalkyl)oxy]triphenylstannane or tributyl[(1‐oxoalkyl)oxy]stannanes as side chains ( P −H=styrene; P −(CH₂)_n−COOSnR₃ =para‐substituted styrene‐like monomeric unit with R=Ph (x=0.1), Bu (x=0.5); n=2–4) were investigated. The tributyl[(1‐oxoalkyl)oxy]stannane copolymer was prepared by direct conversion of the corresponding copolymeric methyl esters with hexabutyldistannoxane. By contrast, the [(1‐oxoalkyl)oxy]triphenylstannane copolymer could be prepared only by a procedure involving two reaction steps consisting of a preliminary hydrolysis of the related methyl ester ( P −H)_1‐x( P −(CH₂)_n−COOMe)_x followed by functionalization of the corresponding poly(carboxylic acid) ( P −H)_1‐x( P −(CH_2n−COOH)_x with hydroxytriphenylstannane. Attempts to directly convert the methyl ester with hydroxytriphenylstannane or hexaphenyldistannoxane led to the formation of uncompletely functionalized product. The structure of the stannane‐functionalized polymers was investigated in solution and solid state by NMR, IR, and thermal analysis. The tributylstannane and triphenylstannane copolymers were assessed as chloride‐selective anion carriers in polymeric‐liquid‐membrane potentiometric ion‐selective electrodes.     

Effect of core substituents on the intramolecular exchange interaction in N,N′‐dioxy‐2,6‐diazaadamantane biradical: DFT studies

Density‐functional theory calculations of a series of organic biradicals on the basis of the N,N′‐dioxy‐2,6‐diazaadamantane core with different substituents at carbon atoms adjacent to the nitroxyl groups have been performed by the UB3LYP/6‐311++G(2d,2p) method. Using the breaking symmetry approach, the values of the exchange interaction parameter, J, between the radical centers are calculated. It is shown that the intramolecular exchange interaction for the most part is ferromagnetic in nature, but the J parameter gradually decreases, changing its sign to antiferromagnetic interaction for the last substituent in the following sequence: CF₃(CH₃)COH > CH₂F(H)COH > CH₂OH > H > CBr₃ > CH₂F > CCl₃ > CF₃ > CH₂Br > CH₂Cl > CH₃ > C₂H₅ > C₃H₇ > i‐C₄H₉ > F > Br > OCH₃ > Cl > CH₂C₆H₅. The calculations at the UHSEH1PBE/6‐311++G(2d,2p) level with the most of substituents show nearly the same variation sequence for the J parameter. It is concluded that spin polarization effects in the diazaadamantane cage and a direct through‐space antiferromagnetic exchange interaction between the nitroxyl groups are the main mechanisms contributing to the exchange interaction parameter value in the studied series of compounds. The exchange coupling constant, J, depends on the electronic effects and geometry of the substituents, as well as on their specific interactions with the nitroxyl radical groups.     

Highly Selective Thiocyanate Electrode Based on Bis‐bebzion Schiff Base Binuclear Copper(II) Complex as Neutral Carrier

Abstract

A highly selective polyvinyl chloride (PVC) membrane electrode, based on N,N′‐(aminoethyl)ethylenediamide bis(2‐benzoideneimine) binuclear copper(II) complex [Cu(II)‐AEBB] as neutral carrier, was prepared for thiocyanate (SCN^?) determination, which displays an anti‐Hofmeister selectivity sequence for a series of anions in the following order: SCN^?>ClO₄ ^?>Sal^? > I^?>NO₃ ^?>Br^?> Cl^?>NO₂ ^?>SO₃ ^2?>F^?>H₂PO₄ ^?>SO₄ ^2?. The electrode exhibited near‐Nernst response for SCN^? with a slope of –59.0 mV/decade over a wide concentration range (8.5×10^?7～6.8×10^?1 mol/L) with a detection limit of –5.0×10^?7 mol/L in pH 5.0 phosphate buffer solution at 25°C. Alternating current (AC) impedance and equivalent circuits were used to investigate the thiocyanate response mechanism of the membrane doped with [Cu(II)‐AEBB].     

Amide and Acyl‐Hydrazine Functionalized Calix[4]arenes as Carriers for Hydrogen Phosphate Selective Electrodes

Anion‐selective solvent polymeric membrane based on hydrogen bond‐forming, neutral ionophores with amide or acyl‐hydrazine groups are described. The use of the two calix[4]arenes results in anion‐selective electrodes with a selectivity for phosphate. The electrodes of the optimum characteristic have the composition of 1 wt% ionophore, 66 wt% o‐NPOE, 33 wt% poly (vinyl chloride) (PVC) and TDMACl (15 or 30 mol% relative to the ionophore 1 and 2 , respectively). The optimized membrane electrodes show Nernstian responses towards monohydrogen phosphate (?29.1 and ?29.3 mV/decade) based on ionophore 1 and 2 , respectively, in a wide concentration range (1.0×10^?5 to 1.0×10^?2 or 1.0×10^?5 to 1.0×10^?1 M). The selectivity coefficients are determined with the fixed interference method and the activity ratio method. The electrodes display an anti‐Hofmeister series selectivity pattern and highly selective for HPO₄^2? over Cl^?, Br^?, CH₃COO^?, NO₃^? and SO₄^2?. The lifetime of the electrodes is at least 1 month and their response time is found to be 25 s. The proposed sensors could be put to analytical use both by direct potentiometry as well as potentiometric titration.     

New amorphous perfluoro polymers: perfluorodioxolane polymers for use as plastic optical fibers and gas separation membranes

To address the need for perfluoro polymers with higher T_g, we have prepared and characterized various perfluorodioxolane monomers via direct fluorination of the hydrocarbon precursors. These monomers were readily polymerized in bulk or in solution initiated by perfluorodibenzoyl peroxide. The polymers obtained have relatively high T_g(~160°C) and exhibited low material dispersion. These polymers are completely amorphous and soluble in fluorinated solvents. The polymers are also chemically and thermally stable (T_g > 300°C). Thus, these perfluorodioxolane polymers may be used as plastic optical fiber material where high T_g is required, such as in automobile and aircraft application. These perfluorodioxolane polymers were also investigated for use as gas separation membrane. Among these polymers, the copolymer of perfluoro (2‐methylene‐1,3‐dioxolane) and perfluoro (2‐methylene‐4,5‐dimethyl dioxolane) showed superior gas separation performance compared with the commercial perfluoro polymers for a number of gas pair, including CO₂/CH₄, H_e/CH₄, H₂/CH₄, and N₂/CH₄. Copyright © 2015 John Wiley & Sons, Ltd.     

Highly Selective Photoreduction of CO2 with Suppressing H2 Evolution over Monolayer Layered Double Hydroxide under Irradiation above 600 nm

Although progress has been made to improve photocatalytic CO₂ reduction under visible light (λ>400 nm), the development of photocatalysts that can work under a longer wavelength (λ>600 nm) remains a challenge. Now, a heterogeneous photocatalyst system consisting of a ruthenium complex and a monolayer nickel‐alumina layered double hydroxide (NiAl‐LDH), which act as light‐harvesting and catalytic units for selective photoreduction of CO₂ and H₂O into CH₄ and CO under irradiation with λ>400 nm. By precisely tuning the irradiation wavelength, the selectivity of CH₄ can be improved to 70.3 %, and the H₂ evolution reaction can be completely suppressed under irradiation with λ>600 nm. The photogenerated electrons matching the energy levels of photosensitizer and m‐NiAl‐LDH only localized at the defect state, providing a driving force of 0.313 eV to overcome the Gibbs free energy barrier of CO₂ reduction to CH₄ (0.127 eV), rather than that for H₂ evolution (0.425 eV).     

Highly 2,3‐Selective Polymerization of Phenylallene and Its Derivatives with Rare‐Earth Metal Catalysts: From Amorphous to Crystalline Products

Rare‐earth metal complexes (Flu‐CH₂‐Py)Ln(CH₂SiMe₃)₂(THF)_n (Ln=Sc( 1 ), Lu( 2 ), Tm( 3 ), Y( 4 ) and Gd( 5 )), upon the activation of [Ph₃C][B(C₆F₅)₄] and Alⁱ Bu₃, were employed to catalyze the polymerization of allene derivatives under mild conditions. The Gd, Y, Tm, Lu metal based precursors exhibited distinguished 2,3‐selectivity (>99.9 %) for phenylallene (PA) polymerization, whereas the smallest Sc metal based precursor showed a moderate 2,3‐selectivity. The activity increased with the central metal size following the trend of Gd( 5 )>Tm( 4 )>Y( 3 )>Lu( 2 )>Sc( 1 ). Moreover, Gd( 5 ) also realized the purely 2,3‐selective polymerizations of polar or nonpolar allene derivatives, para ‐methylphenylallene, para ‐flourophenylallene and para ‐methoxyphenylallene, regardless of electron‐donating or ‐withdrawing substituents. Owing to the highly regular backbones, these polymers (except PPA) were crystalline, thus being the first crystalline polymers based on allene derivatives.     

Melaminium glutarate monohydrate

The crystal structure of the title new melaminium salt, 2,4,6‐tri­amino‐1,3,5‐triazin‐1‐ium glutarate monohydrate, C₃H₇N₆⁺·C₅H₇­O₄^?·H₂O, is built up from singly protonated melaminium residues, mono‐dissociated glutarate ions and water mol­ecules. The melaminium residues are interconnected by four N—H?N hydrogen bonds to form chains. These chains of melaminium residues form a stacking structure. The glutarate anions form a hydrogen‐bonded zigzag polymer of the form [?HOOC(CH₂)₃COO?HOOC(CH₂)₃COO?]_n. The oppositely charged moieties, i.e. the melaminium and glutarate chains, form two‐dimensional polymeric sheets. These sheets are interconnected by O—H?O hydrogen bonds between the COO^? moieties and the water mol­ecules, and these hydrogen bonds stabilize the stacking structure.     

Membrane Transport of the Zwitterionic Aromatic α-Amino Acids by α-Aminophosphonates

Abstract

Bghly selective biological transport of amino acids is usually mediated by carrier proteins. The application of such membrane systems for the analysis and separation of amino acids has long studied. This work is devoted to the transport of zwitterionic form of aromatic a-amino acids such as d,l-Phe, d,l-DOPA, d,l-His, d,l-Tyr, d,l-Trp, via supported liquid membrane (SLM). The lipophilic α-aminophosphonates (I).

R₁ amyl or 2-ethylhexyl; R₂, R₂-(CH₂)4-(CH₂)5-CH₃ & (CH₃), C₄ H(CH₉) & H; H & H; have been used as carrier in the membrane systems composed of a porous polymeric support (Millipore Type FA) impregnated with 10^?1 M carrier in o-nitrophenyl n-octyl ether (amino acid concentration in source phase is 10^?3 M). The cell for membrane extractions is presented on Fig I.     

Synthesis,structure, luminescence and electrochemical and antioxidant properties of anion-controlled silver(I) complexes with 2,2′-(1,4-butanediyl)bis-1,3-benzoxazole

To explore the influence of various anions on the self-assembly and properties of silver complexes, reactions of anions of silver salts with 2,2′-(1,4-butanediyl)bis-1,3-benzoxazole (BBO) afforded four complexes, formulated as [Ag₂(BBO)₂(p-toluenesulfonate)₂] ( 1 ), {[Ag(BBO)(picrate)]}_∞ ( 2 ), {[Ag(BBO)_1/2(o-coumarate)]·DMF}_∞ ( 3 ) and {[Ag₂(BBO)₃](PF₆)₂}_∞ ( 4 ). These complexes were characterized using elemental analysis, infrared spectroscopy and single-crystal X-ray diffraction. The crystal analysis results show that under the influence of coordination modes and steric hindrance of anions, the complexes exhibited binuclear ( 1 ), one-dimensional polymeric ( 2 and 3 ) and two-dimensional polymeric ( 4 ) structures. Compared with the BBO ligand, only complex 1 has a new emission peak at 428 nm, which is attributed to ligand–metal charge transfer. The emission peaks of complexes 2 – 4 are similar to those of the BBO ligand, which can be due to π–π* and n–π* transitions. These results indicate that anions can modulate the structures and luminescent properties of silver complexes. Moreover, cyclic voltammograms of 1 – 4 indicated an irreversible Ag⁺/Ag couple with the order of reversibility being 2 > 1 > 4 > 3 . In vitro antioxidant experiments showed that complex 3 has significant antioxidant activity against superoxide and hydroxyl radicals.     

Synthesis and characterization of new polymeric ionic liquid microgels

A new two‐step route toward the synthesis of polymeric ionic liquid microgel particles is presented. In the first step, hydrophilic microparticles were prepared by the concentrated emulsion polymerization of the ionic liquid 1‐vinyl‐3‐ethylimidazolium bromide in the presence of small amounts of N,N‐dimethylenebisacrylamide as a crosslinking agent. In the second step, the bromide anion was exchanged in water with different anions such as BF, CF₃SO, (CF₃SO₂)₂N^?, (CF₃CF₂SO₂)₂N^?, and dodecylbenzenesulfonate, and this resulted in the coagulation of the microparticles, which were easily recovered by filtration. The obtained polymeric ionic liquid microparticles could be swollen in a very broad range of organic solvents, including apolar organic solvents. As an application, glucose oxidase was encapsulated inside polymeric ionic liquid microparticles, which were used in an amperometric biosensor. The response of the biosensor showed excellent values that strongly depended on the nature of the polymeric ionic liquid counteranion in the order of Br^? > BF > (CF₃SO₂)₂N^?. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 3958–3965, 2006     

Zinkkomplexe eines neuen N,N, O‐Liganden

Zinc Complexes of a New N, N, O Ligand The tridentate ligand N, N(2‐dimethylaminoethyl)‐3, 5‐di‐tert.‐butyl‐salicylaldimine ( L H) results from the corresponding salicylic aldehyde and N, N‐dimethyl ethylenediamine. With zinc salts it forms the mononuclear halide complexes [ L ZnCl ˙ CH₃OH] ( 1 ) and [ L ZnI ˙ CH₃OH] ( 2 ) and the presumably polymeric acetate [ L ZnOCOCH₃] ( 3 ). With diethyl zinc and diphenylphosphoric acid it yields the phosphate complex [ L Zn‐OPO(OPh)₂ ˙ CH₃OH] ( 4 ). The coordination of the complexes, which is between trigonal bipyramidal and square pyramidal, and the character of the five donors in the phosphate complex represent the transition state of a hydrolytic substrate cleavage in a zinc enzyme.     

Metal-containing initiator systems. V. Radical and cationic polymerizations with initiator systems of reduced nickel and chlorosilanes

The polymerizations of methyl methacrylate, styrene, and isobutyl vinyl ether with the binary systems of reduced nickel and chlorosilanes [(CH₃)_nSiCl_4?n, n = 0–3] have been investigated. It was found that these systems could act as both radical and cationic initiators, depending on the nature of vinyl monomers used. The kinetic investigations indicated that methyl methacrylate polymerized via a radical mechanism, and the initiating activity of chlorosilanes decreased in the following order: SiCl₄ > CH₃SiCl₃ > (CH₃)₂SiCl₂ > (CH₃)₃SiCl ? 0. Cationic initiations were observed in the polymerizations of styrene and isobutyl vinyl ether. In the latter case, the activity of chlorosilanes was in the following order: (CH₃)₃SiCl > (CH₃)₂SiCl₂ > CH₃SiCl₃ ? SiCl₄. From the results obtained, a possible mechanism of selective initiation with these systems is proposed and discussed.     

Biomimetic Ion Nanochannels as a Highly Selective Sequential Sensor for Zinc Ions Followed by Phosphate Anions

A novel biomimetic ion‐responsive multi‐nanochannel system is constructed by covalently immobilizing a metal‐chelating ligand, 2,2′‐dipicolylamine (DPA), in polyporous nanochannels prepared in a polymeric membrane. The DPA‐modified multi‐nanochannels show specific recognition of zinc ions over other common metal ions, and the zinc‐ion‐chelated nanochannels can be used as secondary sensors for HPO₄^2? anions. The immobilized DPA molecules act as specific‐receptor binding sites for zinc ions, which leads to the highly selective zinc‐ion response through monitoring of ionic current signatures. The chelated zinc ions can be used as secondary recognition elements for the capture of HPO₄^2? anions, thereby fabricating a sensing nanodevice for HPO₄^2? anions. The success of the DPA immobilization and ion‐responsive events is confirmed by measurement of the X‐ray photoelectron spectroscopy (XPS), contact angle (CA), and current–voltage (I–V) characteristics of the systems. The proposed nanochannel sensing devices display remarkable specificity, high sensitivity, and wide dynamic range. In addition, control experiments performed in complex matrices suggest that this sensing system has great potential applications in chemical sensing, biotechnology, and many other fields.     

Square‐Planar Ruthenium(II) Complexes: Control of Spin State by Pincer Ligand Functionalization

Functionalization of the PNP pincer ligand backbone allows for a comparison of the dialkyl amido, vinyl alkyl amido, and divinyl amido ruthenium(II) pincer complex series [RuCl{N(CH₂CH₂PtBu₂)₂}], [RuCl{N(CHCHPtBu₂)(CH₂CH₂PtBu₂)}], and [RuCl{N(CHCHPtBu₂)₂}], in which the ruthenium(II) ions are in the extremely rare square‐planar coordination geometry. Whereas the dialkylamido complex adopts an electronic singlet (S=0) ground state and energetically low‐lying triplet (S=1) state, the vinyl alkyl amido and the divinyl amido complexes exhibit unusual triplet (S=1) ground states as confirmed by experimental and computational examination. However, essentially non‐magnetic ground states arise for the two intermediate‐spin complexes owing to unusually large zero‐field splitting (D>+200 cm^?1). The change in ground state electronic configuration is attributed to tailored pincer ligand‐to‐metal π‐donation within the PNP ligand series.     

Amine‐Appended Hierarchical Ca‐A Zeolite for Enhancing CO2/CH4 Selectivity of Mixed‐Matrix Membranes

An amine‐appended hierarchical Ca‐A zeolite that can selectively capture CO₂ was synthesized and incorporated into inexpensive membrane polymers, in particular polyethylene oxide and Matrimid, to design mixed‐matrix membranes with high CO₂/CH₄ selectivities. Binary mixture permeation testing reveals that amine‐appended mesoporous Ca‐A is highly effective in improving CO₂/CH₄ selectivity of polymeric membranes. In particular, the CO₂/CH₄ selectivity of the polyethylene oxide membrane increases from 15 to 23 by incorporating 20 wt % amine‐appended Ca‐A zeolite. Furthermore, the formation of filler/polymer interfacial defects, which is typically found in glassy polymer‐zeolite pairs, is inhibited owing to the interaction between the amine groups on the external surface of zeolites and polymer chains. Our results suggest that the amine‐appended hierarchial Ca‐A, which was utilized in membrane fabrication for the first time, is a good filler material for fabricating a CO₂‐selective mixed‐matrix membrane with defect‐free morphology.     

Effect of Ionic Liquid Anion Type in the Performance of Solid Polymer Electrolytes Based on Poly(Vinylidene fluoride‐trifluoroethylene)

The effect of different anions within the ionic liquid in the characteristics of solid polymer electrolytes (SPEs) based on P(VDF‐TrFE) has been investigated. 1‐ethyl‐3‐methylimidazolium acetate, [C₂mim][OAc], 1‐ethyl‐3‐methylimidazolium triflate, [C₂mim][(CF₃SO₃)], 1‐ethyl‐3‐methylimidazolium lactate, [C₂mim][Lactate], 1‐ethyl‐3‐methylimidazolium thiocyanate, [C₂mim][SNC] and 1‐ethyl‐3‐methylimidazolium hydrogen sulfate [C₂mim][HSO₄] have been used in SPE prepared by solvent casting. The polymer phase, thermal and electrochemical properties of the SPE have been determined. The thermal and electrical properties of the SPEs strongly depend on the selected IL, as determined by their different interactions with the polymer matrix. The room temperature ionic conductivity increases in the following way for the different anions: [SNC]>[CF₃SO₃)]>[HSO₄]>[Lactate]>[OAc], which is mainly dependent on the viscosity of the ionic liquid.     

Novel Copolymers of Alkyl and Alkoxy Ring‐Substituted Ethyl 2‐Cyano‐3‐phenyl‐2‐propenoates and Styrene

Abstract

Electrophilic trisubstituted ethylenes, ring‐substituted ethyl 2‐cyano‐3‐phenyl‐2‐propenoates, RC₆H₄CH?C(CN)CO₂C₂H₅ (where R is 2‐CH₃, 3‐CH₃, 4‐CH₃, 2‐OCH₃, 3‐OCH₃, and 4‐OCH₃) were prepared and copolymerized with styrene (ST). The monomers were synthesized by the piperidine catalyzed Knoevenagel condensation of ring‐substituted benzaldehydes and ethyl cyanoacetate, and characterized by CHN analysis, IR, ¹H and ¹³C NMR. All the ethylenes were copolymerized with ST (M₁) in solution with radical initiation (AIBN) at 70°C. The compositions of the copolymers were calculated from nitrogen analysis and the structures were analyzed by IR, ¹H and ¹³C NMR. The order of relative reactivity (1/r ₁) for the monomers is 3‐OCH₃ (0.88)?>?4‐CH₃ (0.71)?>?2‐OCH₃ (0.68)?>?3‐CH₃ (0.55)?>?2‐CH₃ (0.47)?>?4‐OCH₃ (0.40). Higher T _g of the copolymers in comparison with that of polystyrene indicates a decrease in chain mobility of the copolymer due to the high dipolar character of the TSE structural unit. Gravimetric analysis indicated that the copolymers decompose in the 257–287°C range.