Synthesis of 3-substituted 4-imino-4,5-dihydro-1,2,3-triazole 1-oxides and 4-amino-1,2,3-triazole 1-oxides. Crystal and molecular structure of 4-imino-5,5-dimethyl-3-phenyl-4,5-dihydro-1,2,3-triazole 1-oxide

A new procedure for the synthesis of triazole N-oxides, based on base-induced intramolecular cyclization of 1-(-cyanoalkyl)-3-aryl(hetaryl)triazen-1-oxides, is proposed. An X-ray study of 4-imino-5,5-dimethyl-3-phenyl-4,5-dihydro-1,2,3-triazole 1-oxide was carried out.Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 4, pp. 746–751, April, 1993.     

Synthesis,Characterization and DFT Study of a New Family of High-Energy Compounds Based on s-Triazine,Carborane and Tetrazoles

An efficient one-pot synthesis of carborane-containing high-energy compounds was developed via the exploration of carbon–halogen bond functionalization strategies in commercially available 2,4,6-trichloro-1,3,5-triazine. The synthetic pathway first included the substitution of two chlorine atoms in s-triazine with 5-R-tetrazoles (R = H, Me, Et) units to form disubstituted tetrazolyl 1,3,5-triazines followed by the sequential substitution of the remaining chlorine atom in 1,3,5-triazine with carborane N- or S-nucleophiles. All new compounds were characterized by IR- and NMR spectroscopy. The structure of four new compounds was confirmed by single crystal X-ray diffraction analysis. The density functional theory method (DFT B3LYP/6-311 + G*) was used to study the geometrical structures, enthalpies of formation (EOFs), energetic properties and highest occupied and lowest unoccupied molecular orbital (HOMO and LUMO) energies and the detonation properties of synthesized compounds. The DFT calculation revealed compounds processing the maximum value of the detonation velocity or the maximum value of the detonation pressure. Theoretical terahertz frequencies for potential high-energy density materials (HEDMs) were computed, which allow the opportunity for the remote detection of these compounds.     

Synthesis and Characterization of Novel 2-(1,2,3-Triazol-4-yl)-4,5-dihydro-1H-pyrazol-1-yl)thiazoles and 2-(4,5-Dihydro-1H-pyrazol-1-yl)-4-(1H-1,2,3-triazol-4-yl)thiazoles

Reactions of 1-(5-methyl)-1H-1,2,3-triazol-4-yl)ethan-1-ones and benzaldehydes in ethanol under basic conditions gave the corresponding chalcones. Reactions of the chalcones combined with thiosemicarbazide in dry ethanol containing sodium hydroxide afforded the corresponding pyrazolin-N-thioamides. Reactions of the synthesized pyrazolin-N-thioamides and several ketones (namely, ethyl 2-chloro-3-oxobutanoate, 2-bromoacetylbenzofuran, and hydrazonoyl chloride) gave the corresponding novel 2-(1,2,3-triazol-4-yl)-4,5-dihydro-1H-pyrazol-1-yl)thiazoles in high yields (77–90%). Additionally, 2-(4,5-dihydro-1H-pyrazol-1-yl)-4-(1H-1,2,3-triazol-4-yl)thiazoles were obtained in high yields (84–87%) from reactions with N-pyrazoline-thioamides and 4-bromoacetyl-1,2,3-triazoles under basic conditions. The structures of six of the newly synthesized heterocycles were confirmed by X-ray crystallography.     

4,5-Bis(arylethynyl)-1,2,3-triazoles—A New Class of Fluorescent Labels: Synthesis and Applications

Cu-catalyzed 1,3-dipolar cycloaddition of ethyl 2-azidoacetate to iodobuta-1,3-diynes and subsequent Sonogashira cross-coupling were used to synthesize a large series of new triazole-based push–pull chromophores: 4,5-bis(arylethynyl)-1H-1,2,3-triazoles. The study of their optical properties revealed that all molecules have fluorescence properties, the Stokes shift values of which exceed 150 nm. The fluorescent properties of triazoles are easily adjustable depending on the nature of the substituents attached to aryl rings of the arylethynyl moieties at the C4 and C5 atoms of the triazole core. The possibility of 4,5-bis(arylethynyl)-1,2,3-triazoles’ application for labeling was demonstrated using proteins and the HEK293 cell line. The results of an MTT test on two distinct cell lines, HEK293 and HeLa, revealed the low cytotoxicity of 4,5-bis(arylethynyl)triazoles, which makes them promising fluorescent tags for labeling and tracking biomolecules.     

Energetic 2,2‐Dimethyltriazanium Salts: A New Family of Nitrogen‐Rich Hydrazine Derivatives

Amination of 1,1‐dimethylhydrazine with NH₂Cl or hydroxylamine‐O‐sulfonic acid yields 2,2‐dimethyltriazanium (DMTZ) chloride ( 3 ) and sulphate ( 4 ), respectively. The DMTZ cation was paired with the nitrogen‐rich anions 5‐aminotetrazolate ( 5 ), 5‐nitrotetrazolate ( 6 ), 5,5′‐azobistetrazolate ( 7 ), and azide ( 8 ), yielding a new family of energetic salts. The synthesis was carried out by metathesis reactions of salts 3 or 4 and a suitable silver or barium salt. To minimize the risks involved when using heavy metal salts, we used electrodialysis for the synthesis of azide 8 , which avoids the use of highly sensitive species. The DMTZ derivatives were characterized by IR and multinuclear NMR spectroscopy, elemental analysis, and X‐ray diffraction. Thermal stabilities were measured using DSC analysis and their sensitivities towards classical stimuli were determined using standard tests. Lastly, the relationship between hydrogen bonding in the solid state and sensitivity is discussed.     

New Exo-Functional Cyclophane Hosts. Synthesis and Crystal Structures of Inclusion Compounds

The new cyclophane type host compounds 1–3, containing rigid aromatic units and two exo-topic carboxylic acid functions, have been synthesized. Crystalline solvent inclusions, involving the dicarboxylic acid hosts and their corresponding ester intermediates 6 (a–c), namely 1·DMSO (1:4), 2·pyridine (1:3), 3·pyridine (1:4), 6a·pyridine (1:2) and 6a·benzene (1:2), have been prepared and studied using X-ray diffraction on single-crystals. Moreover, X-ray structure analyses of the solvent-free crystals of the 6 (a, b) intermediates were also carried out for comparison. Co-crystals of the carboxylic hosts 1–3 contained H-bonded 1:2 host-guest associates as building blocks, together with additional space-filling guests, whereas only loosely bounded space-filling solvent molecules were found in the two solid inclusion compounds of the 6a cyclophane ester host. In addition to the mentioned conventional H-bond interactions between carboxylic hosts and their guests, the crystal structures proved to be held together by relatively weak C–H…O bonds besides the ordinary van der Waals' interactions. Packing relations, and the effects of structural variations, guest molecules and anisotropic packing forces on the conformation of the semi-rigid cylcophane ring have been discussed and compared in seven crystal structures.     

Novel 1,2,3-Triazole Derivatives as Mimics of Steroidal System—Synthesis,Crystal Structures Determination,Hirshfeld Surfaces Analysis and Molecular Docking

Herein, we present the synthesis and crystal structures determination of five 4-(1-phenyl-1H-1,2,3-triazol-4-yl)phenol derivatives containing halogen atoms, 6a–e, which may be used as an excellent mimic of steroids in the drug development process. Good quality crystals obtained for all of the synthesized compounds allowed the analysis of their molecular structures. Subsequently, the determined crystal structures were used to calculate the Hirshfeld surfaces for each of the synthesized compounds. Furthermore, results of our docking studies indicated that synthesized derivatives are able to bind effectively to the active sites of selected enzymes and receptors involved in the hormone biosynthesis and signaling pathways, analogously to the native steroids.     

两种1,2,3-三唑衍生物的配合物合成策略:晶体结构和表面分析

在不同反应条件下反应得到了两种1,2,3-三唑衍生物的配合物[Co（H₂O）₆][Co（L¹）₃]₂·4H₂O（1）和Cu（L²）₂（2）（HL¹=5-methyl-1-phenyl-1H-1,2,3-triazole-4-carboxylic acid;HL²=1-（4-iodophenyl）-5-methyl-1H-1,2,3-triazole-4-carboxylic acid）。通过X射线单晶衍射和红外光谱确定了晶体结构,同时对配合物1和2进行了表面作用分析（Hirshfeld surface analysis）,在二维指纹图谱中可以清楚的看到配合物中的主要分子间作用。     

A Convenient One-Pot Completely Stereoselective Synthesis of trans-4-Hydroxystilbenes and Its Derivatives and X-Ray Structure of Its Precursor

Abstract

The synthesis of E-isomer of 4-Hydroxystilbene and its derivatives 3 by reductive elimination of the carbonyl function in 2-phenyl-1-(4-hydroxyphenyl)ethan-1-one and its derivatives 2 and the X-ray structure of 2a are described.     

Synthesis and Crystal Structure of 2-p-Methyloxyphenyl- 3a-（2-phenyl-1,2,3-triazole-4-yl）-3,4-dihydro-1,2,4- oxa-diazolo[4,5-d][1,5] Benzothiazepine

The title compound2-p-methyloxyphenyl-3a-(2-phenyl-1,2,3-triazole-4-yl)-3,4- dihydro-1,2,4-oxa-diazolo[4,5-d][1,5] benzothiazepine (C31H25N5O2S, Mr = 531.63) has been syn- thesized and its structure was determined by single-crystal X-ray diffraction. The crystal belongs to triclinic, space group P1 with a = 10.888(2), b = 15.115(3), c = 16.702(3), α = 99.90(3), β = 95.21(3), γ = 100.41(3)o, V = 2642.1(9) nm3, Dc = 1.336 g/cm3, Z = 4, F(000) = 1112, μ = 0.162 mm-1 ,λ(MoKα) = 0.071073 nm, R = 0.0357 and wR = 0.1126 for 10620 observed reflections with I > 2σ(I). X-ray analysis reveals that the molecular backbone consists of a tricyclic system with the central seven- membered ring in a twisted boat-like conformation.     

Energetic Materials with Promising Properties: Synthesis and Characterization of 4,4′‐Bis(5‐nitro‐1,2,3‐2H‐triazole) Derivatives

Using a variety of functionalization strategies, derivatives of 4, 4′‐bis(5‐nitro‐1,2,3‐2H‐triazole) were designed, synthesized, and characterized. The isomers were separated, their structures were confirmed with single‐crystal X‐ray analysis, and their properties were determined by differential scanning calorimetry, density, impact sensitivity, heat of formation, and detonation velocity and pressure (calculated by EXPLO5 V6.01). Those materials were found to exhibit superior detonation performance when compared with the other fully carbon‐nitrated bis(azoles).     

The Study on Synthesis of Some New 1,2,3‐Triazolylurea and Carbonyl Amide Derivatives

The study on syntheses of some N‐substituted‐N′‐[5‐methyl‐1‐(4‐chlorophenyl)‐1,2,3‐triazol‐4‐yl]‐urea 6a‐e and N‐substituted‐[5‐methyl‐1‐(4‐chlorophenyl)‐1,2,3‐triazol‐4‐yl]carbonyl amide 6f‐l derivatives were reported in this paper. The yielded products 6a‐l were confirmed by elemental analyses, NMR, MS and IR spectra.     

Synthesis,crystal structure,and catalytic properties of a copper(I) complex with 3H-(1,2,3)triazolo(4,5-b)pyridin-3-ol

[Cu(tpol)]_n based on the Htpol ligand [Htpol = 3H-(1,2,3)triazolo(4,5-b)pyridin-3-ol] had been synthesized and characterized using X-ray single crystal analysis, elemental analysis, powder X-ray diffraction and IR spectroscopy. Catalytic activity of [Cu(tpol)]_n was measured by the coupling reaction of trifluoroacetimidoyl chlorides with terminal alkyne. The crystal shows two different coordination types of [tpol]^? having a parallelogram of [Cu₂O₂] assembled in a trans geometry. With the change of functional groups of two types of reactants, [Cu(tpol)]_n can replace the noble catalysts and selectively catalyze the coupling of derivatives of 2,2,2-trifluoro-N-phenylacetimidoyl chloride and terminal alkynes, and 6-methoxy-2-(trifluoromethyl)quinoline.     

Synthesis of a New Cyclophane Host and Crystal Structures of Its Compounds with Neutral Guests

A new cyclophane host molecule 3 is prepared by connecting the oxygenatoms of two,-di(4-hydroxyphenyl)-1,4-diisopropylbenzene units withtwo trimethylene spacers. Solid-state structures are determined forcompounds of 3 with dichloromethane and p-xylene guests. The crystals of thetwo host-guest compounds are isomorphous.     

Efficient Synthesis of 4,8-Dibromo Derivative of Strong Electron-Deficient Benzo[1,2-d:4,5-d’]bis([1,2,3]thiadiazole) and Its SNAr and Cross-Coupling Reactions

An efficient synthesis of hydrolytically and thermally stable 4,8-dibromobenzo[1,2-d:4,5-d’]bis([1,2,3]thiadiazole) by the bromination of its parent heterocycle is reported. The structure of 4,8-dibromobenzo[1,2-d:4,5-d’]bis([1,2,3]thiadiazole) was confirmed by X-ray analysis. The conditions for the selective aromatic nucleophilic substitution of one bromine atom in this heterocyclic system by nitrogen nucleophiles are found, whereas thiols formed the bis-derivatives only. Suzuki–Miyaura cross-coupling reactions were found to be an effective method for the selective formation of various mono- and di(het)arylated derivatives of strong electron-deficient benzo[1,2-d:4,5-d’]bis([1,2,3]thiadiazole), and Stille coupling can be employed for the preparation of bis-arylated heterocycles, which can be considered as useful building blocks for the synthesis of DSSCs and OLEDs components.     

A New Functional Cyclophane Host. Synthesis, Complex Formation and Crystal Structures of Three Inclusion Compounds

A new macrocyclic host compound 2 having an octamethylsubstituted cyclophane structure with two intra-annular carboxylic acid functions has beensynthesized. The properties of crystalline inclusion formation are studied and X-ray crystalstructures of three inclusion complexes including acetic acid, propionic acid and acetone asthe guest molecules are reported. Inter-host channel formation with complexed guest moleculesaccommodated into the channels are typical features of the acetic acid and acetone 1 : 4 (host : guest) stoichiometric complexes being also hydrated species, while the propionicacid 1 : 2 complex is of the close packing type containing no additional water molecules.Systems of hydrogen bonds involving the host and guest functional groups are common toall structures. In the case of the acetic acid inclusion compound, a complex supramolecularhydrogen-bonded array comprising a bordering tricyclic assembly of eight molecular species exists.     

Crystal Structures and Emitting Properties of Trifluoromethylaminoquinoline Derivatives: Thermal Single‐Crystal‐to‐Single‐Crystal Transformation of Polymorphic Crystals That Emit Different Colors

2,4‐Trifluoromethylquinoline (TFMAQ) derivatives that have amine ( 1 ), methylamine ( 2 ), phenylamine ( 3 ), and dimethylamine ( 4 ) substituents at the 7‐position of the quinoline ring were prepared and crystallized. Six crystals including the crystal polymorphs of 2 (crystal GB and YG) and 3 (crystal B and G) were obtained and characterized by X‐ray crystallography. In solution, TFMAQ derivatives emitted relatively strong fluorescence (${\lambda {{{\rm f}\hfill \atop {\rm max}\hfill}}}$ =418–469 nm and Φ_f(s)=0.23–0.60) depending on the solvent polarity. From Lippert–Mataga plots, Δμ values in the range of 7.8–14 D were obtained. In the crystalline state, TFMAQ derivatives emitted at longer wavelengths (${\lambda {{{\rm f}\hfill \atop {\rm max}\hfill}}}$ =464–530 nm) with lower intensity (Φ_f(c)=0.01–0.28) than those in n‐hexane solution. The polymorphous crystals of 2 and 3 emitted different colors: 2 , ${\lambda {{{\rm f}\hfill \atop {\rm max}\hfill}}}$ =470 and 530 nm with Φ_f(c)=0.04 and approximately 0.01 for crystal GB and YG, respectively; and 3 , ${\lambda {{{\rm f}\hfill \atop {\rm max}\hfill}}}$ =464 and 506 nm with Φ_f(c)=0.28 and approximately 0.28 for crystal B and G, respectively. In both crystal polymorphs of 2 and 3 , crystals GB and G showed emission color changes by heating/melting/cooling cycles that were representative. By following the color changes in heating at the temperature below the melting point with X‐ray diffraction measurements and X‐ray crystallography, the single‐crystal‐to‐single‐crystal transformations from crystal GB to YG for 2 and from crystal B to G for 3 were revealed.     

A Robust Microfluidic Device for the Synthesis and Crystal Growth of Organometallic Polymers with Highly Organized Structures

A simple and robust microfluidic device was developed to synthesize organometallic polymers with highly organized structures. The device is compatible with organic solvents. Reactants are loaded into pairs of reservoirs connected by a 15 cm long microchannel prefilled with solvents, thus allowing long‐term counter diffusion for self‐assembly of organometallic polymers. The process can be monitored, and the resulting crystalline polymers are harvested without damage. The device was used to synthesize three insoluble silver acetylides as single crystals of X‐ray diffraction quality. Importantly, for the first time, the single‐crystal structure of silver phenylacetylide was determined. The reported approach may have wide applications, such as crystallization of membrane proteins, synthesis and crystal growth of organic, inorganic, and polymeric coordination compounds, whose single crystals cannot be obtained using traditional methods.     

Two Crystal Forms of a Hydrated 2:1 β-Cyclodextrin Fluconazole Complex: Single Crystal X-ray Structures,Dehydration Profiles,and Conditions for Their Individual Isolation

Inclusion complexes between cyclodextrins (CDs) and active pharmaceutical ingredients (APIs) have potential for pharmaceutical formulation. Since crystallization of a given complex may result in the isolation of multiple crystal forms, it is essential to characterize these forms with respect to their structures and physicochemical properties to optimize pharmaceutical candidate selection. Here, we report the preparation and characterization of two crystallographically distinct hydrated forms of an inclusion complex between β-cyclodextrin (β-CD) and the antifungal API fluconazole (FLU) as well as temperature–concentration conditions required for their individual isolation. Determination of crystal water contents was achieved using thermoanalytical methods. X-ray analyses revealed distinct structural differences between the triclinic (TBCDFLU, space group P1) and monoclinic (MBCDFLU, space group C2) crystal forms. Removal of the crystals from their mother liquors led to rapid dehydration of the MBCDFLU crystal, while the TBCDFLU crystal was stable, a result that could be reconciled with the distinct packing arrangements in the respective crystals. This study highlights (a) the importance of identifying possible multiple forms of a cyclodextrin API complex and controlling the crystallization conditions, and (b) the need to characterize such crystal forms to determine the extent to which their physicochemical properties may differ.