A Novel Affinity Support Material for the Separation of Immunoglobulin G from Human Plasma

2‐Methacrylamidohistidine (MAH) as a pseudospecific ligand was synthesized from methacryl chloride and histidine. Spherical beads with an average size of 50–63 μm were obtained by the radical suspension polymerization of MAH and 2‐hydroxyethyl methacrylate (HEMA) conducted in an aqueous dispersion medium. Owing to the reasonably rough character of the bead surface, P(HEMA‐co‐MAH) beads had a specific surface area of 17.6 m²·g^–1. Synthesized MAH was characterized by NMR. P(HEMA‐co‐MAH) beads were characterized by swelling studies, FT‐IR spectroscopy, scanning electron microscopy (SEM) and elemental analysis. P(HEMA‐co‐MAH) affinity beads with a swelling ratio of 65% were used in the separation of human immunoglobulin G (HIgG) from aqueous solutions and human plasma. The maximum HIgG adsorption on the P(HEMA‐co‐MAH) adsorbents was observed at pH 7.4 for phosphate and at pH 6.0 for morpholinoethanesulfonic acid buffers. The HIgG adsorption onto the PHEMA adsorbents was negligible. Higher adsorption values (up to 46.5 mg·g^–1) were obtained when the P(HEMA‐co‐MAH) adsorbents were used in aqueous solutions. Much higher amounts of HIgG were adsorbed from human plasma (up to 73.8 mg·g^–1). Adsorption capacities of other blood proteins were obtained as 3.2 mg·g^–1 for fibrinogen and 4.6 mg·g^–1 for albumin. The total protein adsorption was determined to be 82.2 mg·g^–1. The pseudospecific affinity beads allowed one‐step separation of HIgG from human plasma. HIgG molecules could be repeatedly adsorbed and desorbed with these adsorbents without noticeable loss in their HIgG adsorption capacity.     

Three‐Dimensional Ultralarge‐Pore Ia3d Mesoporous Silica with Various Pore Diameters and Their Application in Biomolecule Immobilization

Highly ordered mesoporous three‐dimensional Ia3d silica (KIT‐6) with different pore diameters has been synthesized by using pluronic P123 as surfactant template and n‐butanol as cosolvent at different synthesis temperatures in a highly acidic medium. The materials were characterized by XRD and N₂ adsorption. The synthesis temperature plays a significant role in controlling the pore diameter, surface area, and pore volume of the materials. The material prepared at 150 °C, KIT‐6‐150, has a large pore diameter (11.3 nm) and a high specific pore volume (1.53 cm³ g^?1). We also demonstrate immobilization of lysozyme, which is a stable and hard protein, on KIT‐6 materials with different pore diameters. The amount of lysozyme adsorbed on large‐pore KIT‐6 is extremely large (57.2 μmol g^?1) and is much higher than that observed for mesoporous silicas MCM‐41, SBA‐15, and KIT‐5, mesoporous carbons, and carbon nanocages. The effect of various parameters such as buffer concentration, adsorption temperature, concentration of the lysozyme, and the textural parameter of the adsorbent on the lysozyme adsorption capacity of KIT‐6 was studied. The amount adsorbed mainly depends on solution pH, ionic strength, adsorption temperature, and pore volume and pore diameter of the adsorbent. The mechanism of adsorption on KIT‐6 under different adsorption conditions is discussed. In addition, the structural stability of lysozyme molecules and the KIT‐6 adsorbent before and after adsorption were investigated by XRD, nitrogen adsorption, and FTIR spectroscopy.     

A Polyhedron‐based Metal‐Organic Framework showing high CO2 Adsorption Capacity

A novel porous copper‐based metal‐organic framework {[Cu₂(TTDA)₂]*(DMA)₇}_n ( 1 ) (DMA = N,N‐dimethylacetamide) was designed and synthesized via the combination of a dual‐functional organic linker 5′‐(4‐(4H‐1,2,4‐triazol‐4‐yl)phenyl)‐[1,1′:3′,1′′‐terphenyl]‐4,4′′‐dicarboxylic acid (H₂TTDA) and a dinuclear Cu^II paddle‐wheel cluster. This MOF is characterized by elemental analysis, powder X‐ray diffraction (PXRD), thermo gravimetric analysis (TGA), and single‐crystal X‐ray diffraction. The framework is constructed from two types of cages (octahedral and cuboctahedral cages) and exhibits two types of circular‐shaped channels of approximate size of 5.8 and 11.4 Å along the crystallographic c axis. The gas sorption experiments indicate that it possesses a large surface area (1687 m² · g^–1) and high CO₂ adsorption capacities around room temperature (up to 172 cm³ · g^–1 at 273 K and 124 cm³ · g^–1 at 298 K).     

Preparation and characterization of polyphenylene sulfide–based chelating resin–functionalized 2‐amino‐1,3,4‐thiadiazole for selective removal Hg(II) from aqueous solutions

A novel chelating resin (PPS‐ATD) containing N and S elements was prepared through the chloromethylation of polyphenylene sulfide resin and subsequent functionalization with 2‐amino‐1,3,4‐thiadiazole (ATD). The structure of PPS‐ATD was systematically characterized and analyzed by the Fourier transform infrared spectroscopy, elemental analysis, thermogravimetric analysis, scanning electron microscope, and energy dispersive spectrometer. The adsorption performance of PPS‐ATD was evaluated by batch methods at different pH, temperature, adsorption time, and initial concentration, and the results showed that the PPS‐ATD exhibited high adsorption capacity (197.79 mg·g⁻¹ at 298 K) and selectivity for Hg(II). The adsorption of PPS‐ATD for Hg(II) was well fitted by the Langmuir isotherm model, and the adsorption process was endothermic. After 5 consecutive regeneration cycles, no obvious loss in the adsorption capacity of the PPS‐ATD was found, which implied that the PPS‐ATD had great application prospects in the treatment of mercury‐containing wastewater.     

Synthesis,Nematicidal Activity,and 3D‐QSAR of Novel 1,3,4‐Oxadiazole/ Thiadiazole Thioether Derivatives

Forty one novel 1,3,4‐oxadiazole/thiadiazole thioether derivatives containing phenoxy moiety were designed and synthesized. Bioassay demonstrated that some of them showed remarkable activities against Tylenchulus semipenetrans in vitro and in vivo. Compounds 20 , 21 , 35 and 39 showed excellent lethal activities after treatment for 48 h in vitro, with LC₅₀ values of 13.4 ± 1.8, 11.7 ± 2.5, 13.7 ± 2.4 and 13.3 ± 1.1 mg·L^–1, respectively, which were obviously superior to fosthiazate (49.1 ± 2.8 mg·L^–1) and avermectin (26.6 ± 2.3 mg·L^–1). Compound 21 can effectively control the citrus nematode disease caused by T. semipenetrans at 200 mg·L^–1 in vivo with (68 ± 3)% inhibitory effect, which was even better than that of avermectin ((63 ± 2)%). The CoMFA and CoMSIA models of three‐dimensional quantitative structure‐activity relationships (3D‐QSARs) were established. The compound 33 was designed based on the 3D‐QSAR models with more vigorous nematicidal activities in vitro (LC₅₀ = 9.8 ± 1.4 mg·L^–1) and in vivo ((70 ± 5)%). These results demonstrated that compound 33 can be considered as a potential nematicide.     

Selenophene‐Flanked Diketopyrrolopyrrole Based Conjugated Polymers for Ambipolar Field‐Effect Transistors

The development of selenophene‐flanked DPP (SeDPP) based copolymers, especially for the ambipolar ones, lags behind other aromatic group flanked DPP‐based polymers. Herein, we report two new ambipolar SeDPP‐based conjugated polymers. One is the alternating polymer PSeDPPFT with normal SeDPP and 3,4‐difluorothiophene units. The other is PSeFDFT , in which the electron acceptor unit is replaced by a new SeDPP derivative, referred as to half‐fused SeDPP. The more planar structure of half‐fused SeDPP endows the backbone of PSeFDFT with good rigidity and planarity. Both polymers exhibit ambipolar transporting properties in air. The PSeFDFT based field‐effect transistors (FETs) display higher and more balanced ambipolar properties with μ_h^ave of 0.27 cm²·V^–1·s^–1, μ_e^ave of 0.18 cm²·V^–1·s^–1, and μ_h^ave/μ_e^ave of 1.5 than those of PSeDPPFT (μ_h^ave = 0.11 cm²·V^–1·s^–1, μ_e^ave = 0.042 cm²·V^–1·s^–1, and μ_h/μ_e = 2.6). This is attributed to the more planar structure, lower LUMO level, higher HOMO level, and better interchain packing orientations of PSeFDFT by comparing with PSeDPPFT . Therefore, a new molecular design strategy to modulate the hole and electron transporting properties is proposed for conjugated D‐A polymers.     

Determination of Cyanuric Acid in Milk Powder and Swimming Pool Water by Ion‐pair Reversed‐phase Liquid Chromatography

An ion‐pair reversed‐phase high‐performance liquid chromatographic method, using tetrabutylammonium bromide (TBAB) as ion‐pair reagent, has been developed for the analysis of cyanuric acid (CA) in milk powder and swimming pool water. It was found that the effect of the concentrations of ion‐pair reagent on the retention of cyanuric acid was different for standard solution and different real samples. The separation was carried out on a reversed‐phase C₁₈ column with 85:15 (V/V) water‐acetonitrile (ACN) containing different concentration of TBAB as mobile phase for different samples. The linear range of the calibration curve for CA was 0.1–100 mg·L^?1. The detection limits calculated at S/N=3 was 0.11 mg·L^?1 for the analysis of milk powder and 0.31 mg·L^?1 for the analysis of swimming pool water, respectively. The method was successfully applied to the analysis of CA in milk powder and swimming pool water.     

复合物HNO···H2O2内N-H···O蓝移氢键的理论研究

A theoretical study on the blue-shifted H-bond N-H…O and red-shifted H-bond O-H…O in the complexHNO…H_2O_2 was conducted by employment of both standard and counterpoise-corrected methods to calculate thegeometric structures and vibrational frequencies at the MP2/6-31G(d),MP2/6-31 G(d,p),MP2/6-311 q G(d,p),B3LYP/6-31G(d),B3LYP/6-31 G(d,p) and B3LYP/6-311 G(d,p) levels.In the H-bond N-H…O,the calcu-lated blue shift of N-H stretching frequency is in the vicinity of 120 cm~(-1) and this is indeed the largest theoreticalestimate of a blue shift in the X-H…Y H-bond ever reported in the literature.From the natural bond orbital analy-sis,the red-shifted H-bond O-H…O can be explained on the basis of the dominant role of the hyperconjugation.For the blue-shifted H-bond N-H…O,the hyperconjugation was inhibited due to the existence of significant elec-tron density redistribution effect,and the large blue shift of the N-H stretching frequency was prominently due tothe rehybridization of sp~n N-H hybrid orbital.     

Polymer electrolyte membranes by in situ polymerization of poly(ethylene carbonate‐co‐ethylene oxide) macromonomers in blends with poly(vinylidene fluoride‐co‐hexafluoropropylene)

Salt‐containing membranes based on polymethacrylates having poly(ethylene carbonate‐co‐ethylene oxide) side chains, as well as their blends with poly(vinylidene fluoride‐co‐hexafluoropropylene) (PVDF‐HFP), have been studied. Self‐supportive ion conductive membranes were prepared by casting films of methacrylate functional poly(ethylene carbonate‐co‐ethylene oxide) macromonomers containing lithium bis(trifluorosulfonyl)imide (LiTFSI) salt, followed by irradiation with UV‐light to polymerize the methacrylate units in situ. Homogenous electrolyte membranes based on the polymerized macromonomers showed a conductivity of 6.3 × 10^?6 S cm^?1 at 20 °C. The preparation of polymer blends, by the addition of PVDF‐HFP to the electrolytes, was found to greatly improve the mechanical properties. However, the addition led to an increase of the glass transition temperature (T_g) of the ion conductive phase by ～5 °C. The conductivity of the blend membranes was thus lower in relation to the corresponding homogeneous polymer electrolytes, and 2.5 × 10^?6 S cm^?1 was recorded for a membrane containing 10 wt % PVDF‐HFP at 20 °C. Increasing the salt concentration in the blend membranes was found to increase the T_g of the ion conductive component and decrease the propensity for the crystallization of the PVDF‐HFP component. © 2006 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 45: 79–90, 2007     

Preparation of thermosensitive,calix[4]arene incorporated P(NIPAM‐co‐HBCalix) hydrogel as a reusable adsorbent of nickel(II) ions

A calix‐conjugated thermo‐responsive hydrogel containing 15% tetra(5‐hexenyloxy)‐p‐tert‐butylcalix[4]arene (HBCalix), P(NIPAM‐co‐HBCalix), was used to remove nickel(II) ions from water. Both thermo‐sensitive properties and the Ni²⁺‐adsorption capabilities of the prepared P(NIPAM‐co‐HBCalix) hydrogels are investigated. Introduction of the monomer HBCalix considerably enhanced the adsorption of Ni²⁺ onto the hydrogel by chelation between hexenyloxy groups and metal ion. When HBCalix units capture Ni²⁺ and forms HBCalix/Ni²⁺ host–guest complexes, the lower critical solution temperature of the hydrogel shifts to a higher temperature due to both the repulsion between charged HBCali/Ni²⁺ groups and the osmotic pressure within the hydrogel. Adsorption studies were carried out by varying contact time, counter ion and initial concentration of Ni²⁺. The evaluation of adsorption properties showed that the hydrogel exhibited better correlation with Langmuir isotherm model. P(NIPAM‐co‐HBCalix) could be used repeatedly with little loss in adsorption capacity by simply changing the environmental temperature. This kind of ion‐recognition hydrogel is promising as a novel adsorption material for adsorption and separation of Ni²⁺ ions. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2013, 51, 2401–2408     

Synthesis and Insecticidal Evaluation of Novel Anthranilic Diamides Derivatives Containing 4‐Chlorine Substituted N‐Pyridylpyrazole

To search for potent insecticides targeting at ryanodine receptors (RyRs), a series of novel anthranilic diamides analogs containing 4‐chlorine N‐pyridylpyrazole were designed and synthesized. Their insecticidal activities were evaluated and the preliminary structure‐activity relationships (SARs) were discussed. The insecticidal results showed that some of the compounds (8a—8h, 8m, 8n) exhibited good larvicidal activities against oriental armyworm at 2.5 mg·L^–1, and compound 8m possessed 60% insecticidal activity at 0.5 mg·L^–1. For diamondback moth, 8m exhibited better activity than Chlorantraniliprole at a hundred fold preference. The calcium imaging technique experiment results suggested that compound 8m could increase the intracellular [Ca²⁺]_i. With the neurons preincubated experiment, the results confirmed that the target of this series of compounds could be RyRs in the central larvae neurons of oriental armyworm. The results indicated that compound 8m could respond as a potential modulator of the insect ryanodine receptor.     

Cadmium(II) Complexes with Mixed cis‐Epoxysuccinate and 2,2′‐Bipyridyl‐Like Ligands: Syntheses,Crystal Structures,and Luminescent Properties

Two new Cd^II complexes, [Cd( ces )(phen)]_∞ ( 1 ) and {[Cd( ces )(bpy)(H₂O)](H₂O)}₂ ( 2 ), were prepared by slow solvent evaporation methods from mixtures of cis‐epoxysuccinic acid and Cd(ClO₄)₂ · 6H₂O in the presence of phen or bpy co‐ligand ( ces = cis‐epoxysuccinate, phen = 1,10‐phenanthroline, and bpy = 2,2′‐bipyridine). Single‐crystal X‐ray diffraction analyses show that complex 1 has a one‐dimensional (1D) helical chain that is further assembled into a two‐dimensional (2D) sheet, and then an overall three‐dimensional (3D) network by the interchain C–H ··· O hydrogen bonds. Complex 2 features a dinuclear structure, which is further interlinked into a 3D supramolecular network by the co‐effects of intermolecular C–H ··· O and C–H ··· π hydrogen bonds as well as π ··· π stacking interactions. The structural differences between 1 and 2 are attributable to the intervention of different 2,2′‐bipyridyl‐like co‐ligands. Moreover, 1 and 2 exhibit intense solid‐state luminescence at room temperature, which mainly originates from the intraligand π→π* transitions of aromatic co‐ligands.     

Fabrication of a Practical and Polymer‐Rich Organic Radical Polymer Electrode and its Rate Dependence

A practical and polymer‐rich organic radical cathode that contains 80 wt.‐% poly(4‐vinyloxy‐2,2,6,6‐tetramethylpiperidine‐N‐oxyl) (PTVE) and 15 wt.‐% vapor‐grown carbon fiber (VGCF) has been fabricated. The PTVE/VGCF composite electrode shows a reversible redox peak at 3.56 V (vs Li/Li⁺) in cyclic voltammetry. A coin‐type cell with the PTVE/VGCF composite electrode as the cathode and lithium metal as the anode has also been fabricated and used for charge/discharge measurements. When the cell was discharged at 0.3 mA · cm⁻² (1 C), a capacity of 104 mAh · g⁻¹, which is 77% of PTVE's theoretical capacity (135 mAh · g⁻¹), was obtained. When it was discharged at 9.0 mA · cm⁻² (30 C), its capacity was 52% of the capacity it had when it was discharged at 0.3 mA · cm⁻² (1 C). Even when discharged at 24 mA · cm⁻² (80 C), it surprisingly had 32% of the capacity it had when discharged at 0.3 mA · cm⁻². The observed rate dependence shows that the polymer‐rich electrode could discharge over 50% of the cell capacity in two minutes and over 30% within one minute.

     

Infrared Spectroscopic Studies on the Surface Chemistry of High‐Surface‐Area Gallia Polymorphs

Polymorphs α, β, and γ of Ga₂O₃ having hexagonal (corundum‐type), monoclinic and cubic (spinel‐type) structure, respectively, were prepared in a high‐surface‐area form, and characterized by powder X‐ray diffraction. Nitrogen adsorption at 77 K showed these gallia samples to have specific surface areas of 77 (α‐Ga₂O₃), 40 (β‐Ga₂O₃) and 120 m² g^?1 (γ‐Ga₂O₃). Fourier transform infrared spectroscopy of adsorbed carbon monoxide (at 77 K) and pyridine (at room temperature) showed that the three gallia polymorphs have a very similar surface Lewis acidity, regardless of their different crystal structures. This Lewis acidity was assigned, mainly, to coordinatively unsaturated tetrahedral Ga³⁺ ions situated on the surface of the small crystallites which constitute the different metal oxide varieties. Ga³⁺···CO adducts formed after CO adsorption gave (in all cases) a characteristic C–O stretching band at 2195–2200 cm^?1, while Lewis‐type adducts formed with adsorbed pyridine were characterized by IR absorption bands at 1610–1612 and 1446–1450 cm^?1. The three (partially hydroxylated) gallia polymorphs showed also a very weak Brønsted acidity, which they manifested by forming hydrogen‐bonded adducts with both CO and pyridine; however no protonation of adsorbed pyridine occurred.     

Chemically modified proton‐conducting membranes based on sulfonated polyimides: Improved water stability and fuel‐cell performance

A series of branched/crosslinked sulfonated polyimide (B/C‐SPI) membranes were prepared and evaluated as proton‐conducting ionomers based on the new concept of in situ crosslinking from sulfonated polyimide (SPI) oligomers and triamine monomers. Chemical branching and crosslinking in SPI oligomers with 1,3,5‐tris(4‐aminophenoxy)benzene as a crosslinker gave the polymer membranes very good water stability and mechanical properties under an accelerated aging treatment in water at 130 °C, despite their high ion‐exchange capacity (2.2–2.6 mequiv g^?1). The resulting polymer electrolytes displayed high proton conductivities of 0.2–0.3 S cm^?1 at 120 °C in water and reasonably high conductivities of 0.02–0.03 S cm^?1 at 50% relative humidity. In a single H₂/O₂ fuel‐cell system at 90 °C, they exhibited high fuel‐cell performances comparable to those of Nafion 112. The B/C‐SPI membranes also displayed good performances in a direct methanol fuel cell with methanol concentrations as high as 50 wt % that were superior to those of Nafion 112. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 3751–3762, 2006     

Removal of Lead (II) Ions by Poly(2‐octadecyl butanedioic acid): Isothermal and Kinetic Studies

Poly(2‐octadecyl‐butanedioic acid), prepared from polyanhydride PA‐18, possesses novel heavy metal adsorption characteristics. The adsorption capacity of this water insoluble polymer for lead (II) was substantially higher than other heterogeneous adsorbants and is equivalent to those obtained with homogeneous sorbants. The polymer exhibited pseudo‐second‐order kinetics and nearly complete adsorption of lead occurred in 15 min with initial lead (II) concentrations greater than 100 mg · L^?1. Adsorptive behavior was accurately predicted by the Dubinin‐Radushkevich isotherm model. The mean free energy of adsorption of lead (II) onto poly(2‐octadecyl‐butanedioic acid) was determined to be 31.6 kJ · mol^?1, suggesting an ion exchange component to the adsorption mechanism. Gibb's free energy values for this process indicate that it is spontaneous. Adsorption was relatively independent of pH in the range of 3–5, due to the utilization of the sodium carboxylate form of the chelating groups, and was not influenced by high Na⁺ concentration and moderate concentrations (up to 200 mg · L^?1) of Ca⁺². Lead (II) solutions containing 2000 mg · L^?1 Ca⁺² did reduce the adsorption of 2000 mg · L^?1 lead (II) by 28%.     

Crystal Structures,Magnetic Properties and Catecholase‐Like Activities of μ‐Alkoxo‐μ‐Carboxylato Double Bridged Dinuclear and Tetranuclear Copper(II) Complexes

One μ‐alkoxo‐μ‐carboxylato bridged dinuclear copper(II) complex, [Cu₂(L¹)(μ‐C₆H₅CO₂)] ( 1 )(H₃L¹ = 1,3‐bis(salicylideneamino)‐2‐propanol)), and two μ‐alkoxo‐μ‐dicarboxylato doubly‐bridged tetranuclear copper(II) complexes, [Cu₄(L¹)₂(μ‐C₈H₁₀O₄)(DMF)₂]·H₂O ( 2 ) and [Cu₄(L²)₂(μ‐C₅H₆O₄]·2H₂O·2CH₃CN ( 3 ) (H₃L² = 1,3‐bis(5‐bromo‐salicylideneamino)‐2‐propanol)) have been prepared and characterized. The single crystal X‐ray analysis shows that the structure of complex 1 is dimeric with two adjacent copper(II) atoms bridged by μ‐alkoxo‐μ‐carboxylato ligands where the Cu···Cu distances and Cu‐O(alkoxo)‐Cu angles are 3.5 11 Å and 132.8°, respectively. Complexes 2 and 3 consist of a μ‐alkoxo‐μ‐dicarboxylato doubly‐bridged tetranuclear Cu(II) complex with mean Cu‐Cu distances and Cu‐O‐Cu angles of 3.092 Å and 104.2° for 2 and 3.486 Å and 129.9° for 3 , respectively. Magnetic measurements reveal that 1 is strong antiferromagnetically coupled with 2J =‐210 cm^?1 while 2 and 3 exhibit ferromagnetic coupling with 2J = 126 cm^?1 and 82 cm^?1 (averaged), respectively. The 2J values of 1–3 are correlated to dihedral angles and the Cu‐O‐Cu angles. Dependence of the pH at 25 °C on the reaction rate of oxidation of 3,5‐di‐tert‐butylcatechol (3,5‐DTBC) to the corresponding quinone (3,5‐DTBQ) catalyzed by 1–3 was studied. Complexes 1–3 exhibit catecholase‐like active at above pH 8 and 25 °C for oxidation of 3,5‐di‐tert‐butylcatechol.     

Effect from Mechanical Stirring Time and Speed on Adsorption Performance of ZIF‐90 for n‐Hexane

Zeolite imidazolate frameworks (ZIFs) represent a class of metal‐organic frameworks (MOFs) for various potential applications due to their outstanding properties. However, to date, the creation of nanoframes with tunable structure faces a challenge. Herein, we develop a facile and efficient physical method that allows the preparation of ZIF‐90 with controllable surface area. In this study, the effect of various stirring time and speed in the acceleration of the precursor dissolution are revealed. The study shows that a moderate stirring speed (640 r · min^–1) and reaction time (6 h) are the optimal conditions to synthesize ZIF‐90 with a high adsorption capacity. More importantly, the maximum adsorption amount of n‐hexane is up to 211 mg · g^–1 by using this as‐prepared sample, which increases by 60 % in comparison with that of the minimum from other sample (133 mg · g^–1).     

Carbon‐Dot‐Sensitized,Nitrogen‐Doped TiO2 in Mesoporous Silica for Water Decontamination through Nonhydrophobic Enrichment–Degradation Mode

Mesoporous silica synthesized from the cocondensation of tetraethoxysilane and silylated carbon dots containing an amide group has been adopted as the carrier for the in situ growth of TiO₂ through an impregnation–hydrothermal crystallization process. Benefitting from initial complexation between the titania precursor and carbon dot, highly dispersed anatase TiO₂ nanoparticles can be formed inside the mesoporous channel. The hybrid material possesses an ordered hexagonal mesostructure with p6mm symmetry, a high specific surface area (446.27 m² g^?1), large pore volume (0.57 cm³ g^?1), uniform pore size (5.11 nm), and a wide absorption band between λ=300 and 550 nm. TiO₂ nanocrystals are anchored to the carbon dot through Ti?O?N and Ti?O?C bonds, as revealed by X‐ray photoelectron spectroscopy. Moreover, the nitrogen doping of TiO₂ is also verified by the formation of the Ti?N bond. This composite shows excellent adsorption capabilities for 2,4‐dichlorophenol and acid orange 7, with an electron‐deficient aromatic ring, through electron donor–acceptor interactions between the carbon dot and organic compounds instead of the hydrophobic effect, as analyzed by the contact angle analysis. The composite can be photocatalytically recycled through visible‐light irradiation after adsorption. The narrowed band gap, as a result of nitrogen doping, and the photosensitization effect of carbon dots are revealed to be coresponsible for the visible‐light activity of TiO₂. The adsorption capacity does not suffer any clear losses after being recycled three times.     

Ion‐Directed Coordinative Polymerization of Copper(II) Pyridyl‐Alcohol Complexes Through Thiane Functionalities

A mononuclear complex [Cu(HL · S)₂(NO₃)₂] ( 1 ) and a one‐ dimensional coordination polymer [Cu(HL · S)Cl₂]_n ( 2 ) [HL · S = 4‐(pyridin‐2‐ylmethyl)tetrahydro‐2H‐thiopyran‐4‐ol] showcase the structure‐directing role of the counterions in their formation reaction: monodentate ligation of NO₃^– and Cl^– induces an octahedral (with two HL · S per Cu in 1 ) or trigonal‐bipyramidal (with one HL · S per Cu in 2 ) Cu^II coordination environment. In contrast to 1 exhibiting no coordinative metal–sulfur bonds in the crystal lattice (space group P2₁/c), 2 (P2₁/c) features intermolecular Cu–S contacts of 2.3188(7) Å. The coordination compounds are thermally stable up to ca. 160 °C. Whereas 1 demonstrates the spin‐like behavior of an isolated central Cu^II ion, compound 2 exhibits weak antiferromagnetic intra‐chain coupling with J ≈ –2.1 cm^–1 between neighboring Cu^II ions.