Kinetics and Mechanism Study of the Substitution Reactions of the Chloride Ligand in Dichloro(5,10,15,20)‐tetraphenyl‐21H,23H‐porphinato)tin(IV) by Organic Bases in Dimethylformamide Solvent

Substitution reactions of a Cl⁻ ligand in [SnCl₂(tpp)] (tpp=5,10,15,20‐tetraphenyl‐21H,23H‐porphinato(2−)) by five organic bases i.e., butylamine (BuNH₂), sec‐butylamine (^sBuNH₂), tert‐butylamine (^tBuNH₂), dibutylamine (Bu₂NH), and tributylamine (Bu₃N), as entering nucleophile in dimethylformamide at I=0.1M (NaNO₃) and 30–55° were studied. The second‐order rate constants for the substitution of a Cl⁻ ligand were found to be (36.86±1.14)⋅10⁻³, (32.91±0.79)⋅10⁻³, (22.21±0.58)⋅10⁻³, (19.09±0.66)⋅10⁻³, and (1.36±0.08)⋅10⁻³ M ⁻¹s⁻¹ at 40° for BuNH₂, ^tBuNH₂, ^sBuNH₂, Bu₂NH, and Bu₃N, respectively. In a temperature‐dependence study, the activation parameters ΔH^≠ and ΔS^≠ for the reaction of [SnCl₂(tpp)] with the organic bases were determined as 38.61±4.79 kJ mol⁻¹ and −150.40±15.46 J K⁻¹mol⁻¹ for BuNH₂, 40.95±4.79 kJ mol⁻¹ and −143.75±15.46 J K⁻¹mol⁻¹ for ^tBuNH₂, 30.88±2.43 kJ mol⁻¹ and −179.00±7.82 J K⁻¹mol⁻¹ for ^sBuNH₂, 26.56±2.97 kJ mol⁻¹ and −194.05±9.39 J K⁻¹mol⁻¹ for Bu₂NH, and 39.37±2.25 kJ mol⁻¹ and −174.68±7.07 J K⁻¹ mol⁻¹ for Bu₃N. From the linear rate dependence on the concentration of the bases, the span of k₂ values, and the large negative values of the activation entropy, an associative (A) mechanism is deduced for the ligand substitution.     

Kinetics of D,L–Lactide Polymerization Initiated with Zirconium Acetylacetonate

The kinetic of D,L-lactide polymerization in presence of biocompatible zirconium acetylacetonate initiator was studied by differential scanning calorimetry in isothermal mode at various temperatures and initiator concentrations. The enthalpy of D,L-lactide polymerization measured directly in DSC cell was found to be ΔH=−17.8±1.4 kJ mol⁻¹. Kinetic curves of D,L-lactide polymerization and propagation rate constants were determined for polymerization with zirconium acetylacetonate at concentrations of 250–1000 ppm and temperature of 160–220 °C. Using model or reversible polymerization the following kinetic and thermodynamic parameters were calculated: activation energy E_a=44.51±5.35 kJ mol⁻¹, preexponential constant lnA=15.47±1.38, entropy of polymerization ΔS=−25.14 J mol⁻¹ K⁻¹. The effect of reaction conditions on the molecular weight of poly(D,L-lactide) was shown.     

Dynamic changes in composition of extracts of natural products as monitored by in situ NMR

The direct in situ NMR observation and quantification, based on the aldehyde –CH chemical shift region, of the inter‐conversion of secoiridoid derivatives due to temperature and solvent effects is demonstrated in complex extracts of natural products without prior isolation of the individual components. The equilibrium between the aldehyde hydrate form and the dialdehyde form of the oleuropein aglycon of an olive leaf aqueous extract in D₂O was shown to be temperature dependent. The resulting thermodynamic values of the Van't Hoff plot with ΔH^o = ?26.34 ± 1.00 kJ mol^?1 and TΔS° (298 K) = ?24.70 ± 1.00 kJ mol^?1 demonstrate a significant entropy term which nearly compensates the effect of enthalpy at room temperature. The equilibrium between the two diastereomeric hemiacetal forms and the dialdehyde form of the oleuropein 6‐O‐β‐d ‐glucopyranoside aglycon of an olive leaf aqueous extract in CD₃OD was also shown to be strongly temperature dependent again because of the significant entropy term (TΔS° (298 K) = ?26.50 ± 1.39 kJ mol^?1) compared with that of the enthalpy term (ΔH^o = ?36.64 ± 1.46 kJ mol^?1). This is the first demonstration of the significant role of the entropy parameter in determining the equilibrium of chemical transformations in complex mixtures of natural products due to solvent and temperature effects. Copyright © 2014 John Wiley & Sons, Ltd.     

A laser flash photolysis kinetic study of reactions of the Cl2− radical anion with oxygenated hydrocarbons in aqueous solution

A laser photolysis–long path laser absorption (LP‐LPLA) experiment has been used to determine the rate constants for H‐atom abstraction reactions of the dichloride radical anion (Cl₂⁻) in aqueous solution. From direct measurements of the decay of Cl₂⁻ in the presence of different reactants at pH = 4 and I = 0.1 M the following rate constants at T = 298 K were derived: methanol, (5.1 ± 0.3)·10⁴ M⁻¹ s⁻¹; ethanol, (1.2 ± 0.2)·10⁵ M⁻¹ s⁻¹; 1‐propanol, (1.01 ± 0.07)·10⁵ M⁻¹ s⁻¹; 2‐propanol, (1.9 ± 0.3)·10⁵ M⁻¹ s⁻¹; tert.‐butanol, (2.6 ± 0.5)·10⁴ M⁻¹ s⁻¹; formaldehyde, (3.6 ± 0.5)·10⁴ M⁻¹ s⁻¹; diethylether, (4.0 ± 0.2)·10⁵ M⁻¹ s⁻¹; methyl‐tert.‐butylether, (7 ± 1)·10⁴ M⁻¹ s⁻¹; tetrahydrofuran, (4.8 ± 0.6)·10⁵ M⁻¹ s⁻¹; acetone, (1.41 ± 0.09)·10³ M⁻¹ s⁻¹. For the reactions of Cl₂⁻ with formic acid and acetic acid rate constants of (8.0 ± 1.4)·10⁴ M⁻¹ s⁻¹ (pH = 0, I = 1.1 M and T = 298 K) and (1.5 ± 0.8) · 10³ M⁻¹ s⁻¹ (pH = 0.42, I = 0.48 M and T = 298 K), respectively, were derived. A correlation between the rate constants at T = 298 K for all oxygenated hydrocarbons and the bond dissociation energy (BDE) of the weakest C‐H‐bond of log k_2nd = (32.9 ± 8.9) − (0.073 ± 0.022)·BDE/kJ mol⁻¹ is derived. From temperature‐dependent measurements the following Arrhenius expressions were derived: k (Cl₂⁻ + HCOOH) = (2.00 ± 0.05)·10¹⁰·exp(−(4500 ± 200) K/T) M⁻¹ s⁻¹, E_a = (37 ± 2) kJ mol⁻¹ k (Cl₂⁻ + CH₃COOH) = (2.7 ± 0.5)·10¹⁰·exp(−(4900 ± 1300) K/T) M⁻¹ s⁻¹, E_a = (41 ± 11) kJ mol⁻¹ k (Cl₂⁻ + CH₃OH) = (5.1 ± 0.9)·10¹²·exp(−(5500 ± 1500) K/T) M⁻¹ s⁻¹, E_a = (46 ± 13) kJ mol⁻¹ k (Cl₂⁻ + CH₂(OH)₂) = (7.9 ± 0.7)·10¹⁰·exp(−(4400 ± 700) K/T) M⁻¹ s⁻¹, E_a = (36 ± 5) kJ mol⁻¹ Finally, in measurements at different ionic strengths (I) a decrease of the rate constant with increasing I has been observed in the reactions of Cl₂⁻ with methanol and hydrated formaldehyde. © 1999 John Wiley & Sons, Inc. Int J Chem Kinet 31: 169–181, 1999     

Kinetics and mechanism of the reaction of sulphur(IV) with N,N′‐ethylene‐bis(sali‐cylidiniminato)manganese‐(III) in aqueous solution

The reaction of (diaqua)(N,N′‐ethylene‐bis(salicylidiniminato)manganese(III) with aqueous sulphite buffer results in the formation of the corresponding mono sulphito complex, [Mn(Salen)(SO₃)]⁻ (S‐bonded isomer) via three distinct paths: (i) Mn(Salen)(OH₂)₂⁺ + HSO₃⁻ → (k₁); (ii) Mn(Salen)(OH₂)₂⁺ + SO₃²⁻ → (k₂); (III) Mn(Salen)(OH₂)(OH) + SO₃²⁻ → (k₃) in the stopped flow time scale. The fact that the mono sulphito complex does not undergo further anation with SO₃²⁻/HSO₃⁻ may be attributed to the strong trans‐activating influence of the S‐bonded sulphite. The values of the rate constants (10⁻²k_i/dm² mol⁻¹ s⁻¹ at 25°C, I = 0.3 mol dm⁻³), ΔH_i^#/kJ mol⁻¹ and ΔS_i^#/J K⁻¹ mol⁻¹ respectively are: 2.97 ± 0.27, 42.4 ± 0.2, −55.3 ± 0.6 (i = 1); 11.0 ± 0.8, 33 ± 3, −75 ± 10 (i = 2); 20.6 ± 1.9, 32.4 ± 0.2, −72.9 ± 0.6 (i = 3). The trend in reactivity (k₂ > k₁), a small labilizing effect of the coordinated hydroxo group (k₃/k₂ < 2), and substantially low values of ΔS^# suggest that the mechanism of aqua ligand substitution of the diaqua, and aqua‐hydroxo complexes is most likely associative interchange (I_a). No evidence for the formation of the O‐bonded sulphito complex and the ligand isomerization in the sulphito complex, (Mn^III‐OSO₂ → Mn^III‐SO₃), ensures the selectivity of the Mn^III centre toward the S‐end of the S^IV species. The monosulphito complex further undergoes slow redox reaction in the presence of excess sulphite to produce Mn^II, S₂O₆²⁻ and SO₄²⁻. The formation of dithionate is a consequence of the fast dimerization of the SO₃₋. generated in the rate determining step and also SO₄²⁻ formation is attributed to the fast scavenging of the SO₃₋. by the Mn^III species via a redox path. The internal reduction of the Mn^III centre in the monosulphito complex is insignificant. The redox reaction of the monosulphitomanganese(III) complex operates via two major paths, one involving HSO₃₋ and the other SO₃²⁻. The electron transfer is believed to be outersphere type. The substantially negative values of activation entropies (ΔS^# = −(1.3 ± 0.2) × 10² and −(1.6 ± 0.2) × 10² J K⁻¹ mol⁻¹ for the paths involving HSO₃₋ and SO₃²⁻ respectively) reflect a considerable degree of ordering of the reactants in the act of electron transfer. © 1999 John Wiley & Sons, Inc. Int J Chem Kinet 31: 627–635, 1999     

Kinetic Determination of the Gas‐Phase Decarbonylation of Butyraldehyde in the Presence of HCl Catalyst

The gas‐phase kinetics and mechanism of the homogeneous elimination of CO from butyraldehyde in the presence of HCl has been experimentally studied. The reaction is homogeneous and follows the second‐order kinetics with the following rate expression: log k ₁ (s⁻¹ L mol⁻¹) = (13.27 ± 0.36) – (173.2 ± 4.4) kJ mol⁻¹(2.303RT )⁻¹. Experimental data suggested a concerted four‐membered cyclic transition state type of mechanism. The first and rate‐determining step occurs through a four‐membered cyclic transition state to produce propane and formyl chloride. The formyl chloride intermediate rapidly decomposes to CO and HCl gases.     

Kinetic study of the ligand substitution on the trimethylplatinum(iv) complexes with unidentate ligands

Ligand substitution kinetics for the reaction [Pt^IVMe₃(X)(NN)]+NaY=[Pt^IVMe₃(Y)(NN)]+NaX, where NN=bipy or phen, X=MeO⁻, CH₃COO⁻, or HCOO⁻, and Y=SCN⁻ or N₃⁻, has been studied in methanol at various temperatures. The kinetic parameters for the reaction are as follows. The reaction of [PtMe₃(OMe)(phen)] with NaSCN: k₁=36.1±10.0 s⁻¹; ΔH₁^≠=65.9±14.2 kJ mol⁻¹; ΔS₁^≠=6±47 J mol⁻¹ K⁻¹; k₋₂=0.0355±0.0034 s⁻¹; ΔH₋₂^≠=63.8±1.1 kJ mol⁻¹; ΔS₋₂^≠=−58.8±3.6 J mol⁻¹ K⁻¹; and k₋₁/k₂=148±19. The reaction of [PtMe₃(OAc)(bipy)] with NaN₃: k₁=26.2±0.1 s⁻¹; ΔH₁^≠=60.5±6.6 kJ mol⁻¹; ΔS₁^≠=−14±22 J mol⁻¹K⁻¹; k₋₂=0.134±0.081 s⁻¹; ΔH₋₂^≠=74.1±24.3 kJ mol⁻¹; ΔS₋₂^≠=−10±82 J mol⁻¹K⁻¹; and k₋₁/k₂=0.479±0.012. The reaction of [PtMe₃(OAc)(bipy)] with NaSCN: k₁=26.4±0.3 s⁻¹; ΔH₁^≠=59.6±6.7 kJ mol⁻¹; ΔS₁^≠=−17±23 J mol⁻¹K⁻¹; k₋₂=0.174±0.200 s⁻¹; ΔH₋₂^≠=62.7±10.3 kJ mol⁻¹; ΔS₋₂^≠=−48±35 J mol⁻¹K⁻¹; and k₋₁/k₂=1.01±0.08. The reaction of [PtMe₃(OOCH)(bipy)] with NaN₃: k₁=36.8±0.3 s⁻¹; ΔH₁^≠=66.4±4.7 kJ mol⁻¹; ΔS₁^≠=7±16 J mol⁻¹K⁻¹; k₋₂=0.164±0.076 s⁻¹; ΔH₋₂^≠=47.0±18.1 kJ mol⁻¹; ΔS₋₂^≠=−101±61 J mol⁻¹ K⁻¹; and k₋₁/k₂=5.90±0.18. The reaction of [PtMe₃(OOCH)(bipy)] with NaSCN: k₁ =33.5±0.2 s⁻¹; ΔH₁^≠=58.0±0.4 kJ mol⁻¹; ΔS₁^≠=−20.5±1.6 J mol⁻¹ K⁻¹; k₋₂=0.222±0.083 s⁻¹; ΔH₋₂^≠=54.9±6.3 kJ mol⁻¹; ΔS₋₂^≠=−73.0±21.3 J mol⁻¹ K⁻¹; and k₋₁/k₂=12.0±0.3. Conditional pseudo-first-order rate constant k₀ increased linearly with the concentration of NaY, while it decreased drastically with the concentration of NaX. Some plausible mechanisms were examined, and the following mechanism was proposed. [Note to reader: Please see article pdf to view this scheme.] © 1998 John Wiley & Sons, Inc. Int J Chem Kinet 30: 523–532, 1998     

Temperature dependence of the rate constants of the reactions of oxygen atoms with 1-pentene, 1-hexene,cis-2-pentene,and trans-2-pentene

The kinetics of the reactions of ground state oxygen atoms with 1-pentene, 1-hexene, cis-2-pentene, and trans-2-pentene was investigated in the temperature range 200 to 370 K. In this range the temperature dependences of the rate constants can be represented by k = A′ Tⁿ exp(− E′_a/RT) with A′ = (1.0 ± 0.6) · 10⁻¹⁴ cm³ s⁻¹, n = 1.13 ± 0.02, E′_a = 0.54 ± 0.05 kJ mol⁻¹ for 1-pentene: A′ = (1.3 ± 1.2) · 10⁻¹⁴ cm³ s⁻¹, n = 1.04 ± 0.08, E′_a = 0.2 ± 0.4 kJ mol⁻¹ for 1-hexene; A′ = (0.6 ± 0.6) · 10⁻¹⁴ cm³ s⁻¹, n = 1.12 ± 0.05, E′_a = − 3.8 ± 0.8 kJ mol⁻¹ for cis-2-pentene; and A′ = (0.6 ± 0.8) · 10⁻¹⁴ cm³ s⁻¹, n = 1.14 ± 0.06, E′_a = − 4.3 ± 0.5 kJ mol⁻¹ for trans-2-pentene. The atoms were generated by the H₂-laser photolysis of NO and detected by time resolved chemiluminescence in the presence of NO. The concentrations of the O(³P) atoms were kept so low that secondary reactions with products are unimportant. © 1997 John Wiley & Sons, Inc.     

Thermodynamic properties of potassium metasilicate (K2SiO3)

The standard enthalpy of formation of potassium metasilicate (K₂SiO₃), determined by hydrofluoric acid solution calorimetry, was found to be ΔH^o_f,298 = −363.866±0.421 kcal mol⁻¹ (−1522.415±1.762 kj mol⁻¹). The standard enthalpy of formation from the oxides was found to beΔH^o₂₉₈ = −64.786±0.559 kcal mol⁻¹ (−271.065±2.339 kJ mol⁻¹).These experimentally determined data were combined with data from the literature to calculate the Gibbs energies of formation and equilibrium constants of formation over the temperature range of the literature data. The standard enthalpies of formation and Gibbs energies of formation are given as functions of temperature. The standard Gibbs energy of formation is ΔG_f,298.15⁰ = −341.705 kcal mol⁻¹ (−1429.694 kJ mol⁻¹).     

The kinetics and mechanisms of gas phase elimination of primary,secondary, and tertiary 2‐hydroxyalkylbenzenes

2‐Phenylethanol, racemic 1‐phenyl‐2‐propanol, and 2‐methyl‐1‐phenyl‐2‐propanol have been pyrolyzed in a static system over the temperature range 449.3–490.6°C and pressure range 65–198 torr. The decomposition reactions of these alcohols in seasoned vessels are homogeneous, unimolecular, and follow a first‐order rate law. The Arrhenius equations for the overall decomposition and partial rates of products formation were found as follows: for 2‐phenylethanol, overall rate log k₁(s⁻¹)=12.43−228.1 kJ mol⁻¹ (2.303 RT)⁻¹, toluene formation log k₁(s⁻¹)=12.97−249.2 kJ mol⁻¹ (2.303 RT)⁻¹, styrene formation log k₁(s⁻¹)=12.40−229.2 kJ mol⁻¹(2.303 RT)⁻¹, ethylbenzene formation log k₁(s⁻¹)=12.96−253.2 kJ mol⁻¹(2.303 RT)⁻¹; for 1‐phenyl‐2‐propanol, overall rate log k₁(s⁻¹)=13.03−233.5 kJ mol⁻¹(2.303 RT)⁻¹, toluene formation log k₁(s⁻¹)=13.04−240.1 kJ mol⁻¹(2.303 RT)⁻¹, unsaturated hydrocarbons+indene formation log k₁(s⁻¹)=12.19−224.3 kJ mol⁻¹(2.303 RT)⁻¹; for 2‐methyl‐1‐phenyl‐2‐propanol, overall rate log k₁(s⁻¹)=12.68−222.1 kJ mol⁻¹(2.303 RT)⁻¹, toluene formation log k₁(s⁻¹)=12.65−222.9 kJ mol⁻¹(2.303 RT)⁻¹, phenylpropenes formation log k₁(s⁻¹)=12.27−226.2 kJ mol⁻¹(2.303 RT)⁻¹. The overall decomposition rates of the 2‐hydroxyalkylbenzenes show a small but significant increase from primary to tertiary alcohol reactant. Two competitive eliminations are shown by each of the substrates: the dehydration process tends to decrease in relative importance from the primary to the tertiary alcohol substrate, while toluene formation increases. © 1999 John Wiley & Sons, Inc. Int J Chem Kinet 31: 401–407, 1999     

Kinetics of the gas‐phase elimination of α‐Bromophenylacetic acid under maximum inhibition

The gas phase elimination kinetics of the title compound was studied over the temperature range of 260.1–315.0°C and pressure range of 20–70 Torr. This elimination, in seasoned static reaction system and in the presence of at least fourfold of the free radical inhibitor toluene, is homogeneous, unimolecular and follows a first‐order rate law. The reaction yielded mainly benzaldehyde, CO, and HBr, and small amounts of benzylbromide and CO₂. The observed rate coefficients are expressed by the following Arrhenius equations: For benzaldehyde formation: log k₁ (s⁻¹) = (12.23 ± 0.26) − (164.9 ± 2.7) kJ mol⁻¹ (2.303 RT)⁻¹ For benzylbromide formation: log k₁ (s⁻¹) = (13.82 ± 0.50) − (192.8 ± 5.5) kJ mol⁻¹ (2.303 RT)⁻¹ The mechanisms are believed to proceed through a semi‐polar five‐membered cyclic transition state for the benzaldehyde formation, while a four‐centered cyclic transition state for benzylbromide formation. © 1999 John Wiley & Sons, Inc. Int J Chem Kinet 31: 725–728, 1999     

High-level computational study on the thermochemistry of saturated and unsaturated three- and four-membered nitrogen and phosphorus rings

The heats of formation and strain energies for saturated and unsaturated three- and four-membered nitrogen and phosphorus rings have been calculated using G2 theory. G2 heats of formation (ΔH_f298) of triaziridine [(NH)₃], triazirine (N₃H), tetrazetidine [(NH)₄], and tetrazetine (N₄H₂) are 405.0, 453.7, 522.5, and 514.1 kJ mol⁻¹, respectively. Tetrazetidine is unstable (121.5 kJ mol⁻¹ at 298 K) with respect to its dissociation into two trans-diazene (N₂H₂) molecules. The dissociation of tetrazetine into molecular nitrogen and trans-diazene is highly exothermic (ΔH₂₉₈ = −308.3 kJ mol⁻¹ calculated using G2 theory). G2 heats of formation (ΔH_f298) of cyclotriphosphane [(PH)₃], cyclotriphosphene (P₃H), cyclotetraphosphane [(PH)₄], and cyclotetraphosphene (P₄H₂) are 80.7, 167.2, 102.7, and 170.7 kJ mol⁻¹, respectively. Cyclotetraphosphane and cyclotetraphosphene are stabilized by 145.8 and 101.2 kJ mol⁻¹ relative to their dissociations into two diphosphene molecules or into diphosphene (HP(DOUBLE BOND)PH) and diphosphorus (P₂), respectively. The strain energies of triaziridine [(NH)₃], triazirine (N₃H), tetrazetidine [(NH)₄], and tetrazetine (N₄H₂) were calculated to be 115.0, 198.3, 135.8, and 162.0 kJ mol⁻¹, respectively (at 298 K). While the strain energies of the nitrogen three-membered rings in triaziridine and triazirine are smaller than the strain energies of cyclopropane (117.4 kJ mol⁻¹) and cyclopropene (232.2 kJ mol⁻¹), the strain energies of the nitrogen four-membered rings in tetrazetidine and tetrazetine are larger than those of cyclobutane (110.2 kJ mol⁻¹) and cyclobutene (132.0 kJ mol⁻¹). In contrast to higher strain in cyclopropane as compared with cyclobutane, triaziridine is less strained than tetrazetidine. The strain energies of cyclotriphosphane [(PH)₃, 21.8 kJ mol⁻¹], cyclotriphosphene (P₃H, 34.6 kJ mol⁻¹), cyclotetraphosphane [(PH)₄, 24.1 kJ mol⁻¹], and cyclotetraphosphene (P₄H₂, 18.5 kJ mol⁻¹), calculated at the G2 level are considerably smaller than those of their carbon and nitrogen analog. Cyclotetraphosphene containing the P(DOUBLE BOND)P double bond is less strained than cyclotetraphosphane, in sharp contrast to the ratio between the strain energies for the analogous unsaturated and saturated carbon and nitrogen rings. © 1997 John Wiley & Sons, Inc. Int J Quant Chem 62 : 373–384, 1997     

Two Three‐Dimensional Metal‐Organic Frameworks Constructed from Alkaline Earth Metal Cations (Sr and Ba) and 5‐Nitroisophthalicacid – Synthesis,Charaterization, and Thermochemistry

Two MOFs of [Sr^II(5‐NO₂‐BDC)(H₂O)₆] ( 1 ) and [Ba^II(5‐NO₂‐BDC)(H₂O)₆] ( 2 ) have been synthesized in water using alkaline earth metal salts and the rigid organic ligand 5‐NO₂‐H₂BDC. The compounds were characterized by elemental analysis, infrared spectrum, thermal analysis, and X‐ray crystallography. Crystal structure analyses have shown that the two complexes are isostructural as evidenced by IR spectra and TG‐DTA. Both compounds present three‐dimensional frameworks built up from infinite chains of edge‐sharing twelve‐membered rings through O–H···O hydrogen bonds. The specific heat capacities of the title complexes have been determined by an improved RD496‐III microcalorimeter with the values of (109.29 ± 0.693) J mol⁻¹ K⁻¹ and (81.162 ± 0.858) J mol⁻¹ K⁻¹ at 298.15 K, and the molar enthalpy changes of the formation reactions of complexes at 298.15 K were calculated as (4.897 ± 0.008) kJ mol⁻¹ and (2.617 ± 0.009) kJ mol⁻¹, respectively.     

Surface segregation measurements of In and S impurities from a dilute Cu(In,S) ternary alloy

The surface segregation of In and S from a dilute Cu(In,S) ternary alloy were measured using Auger electron spectroscopy coupled with a linear programmed heater. The alloy was linearly heated and cooled at constant rates. Segregation data of a linear heat run showed surface segregation of In that reached a maximum surface coverage of 25% followed by S, which reached a coverage of 30%. It was found that after In had reached a maximum surface coverage, it started to desegregate as soon as the S enriched the surface until In was completely replaced by S. The segregation parameters, namely, the pre‐exponential factor (D₀), activation energy (Q), segregation energy (ΔG?) and interaction energy (Ω) were extracted from the measured segregation data for both In and S segregation in Cu by simulating the measured segregation data with a theoretical segregation model (modified Darken model). The segregation parameters obtained for In segregation in Cu are D₀ = 1.8 ± 0.5 × 10^?5 m² s^?1, Q = 184.3 ± 1.0 kJ.mol^?1, ΔG? = ?61.4 ± 1.4 kJ.mol^‐1, Ω_Cu?In = 3.0 ± 0.4 kJ.mol^?1; for S segregation in Cu the parameters are D₀ = 8.9 ± 0.5 × 10^?3 m² s^?1, Q = 212.8 ± 3.0 kJ.mol^?1, ΔG? = ?120.0 ± 3.5 kJ.mol^?1, Ω_Cu?S = 23.0 ± 2.0 kJ mol^?1 and the In and S interaction parameter is Ω_In?S = ?4.0 ± 0.5 kJ.mol^?1. The initial parameters used for the Darken calculations were extracted from fits performed with the Fick's and Guttmann model. Copyright © 2013 John Wiley & Sons, Ltd.     

Direct kinetic parameters for the reaction of Br atoms with neopentane

Laser flash photolysis coupled with resonance fluorescence detection of Br atoms was employed to investigate the temperature dependence of the reaction Br + neo‐C₅H₁₂ (1) between 688 and 775 K. The following Arrhenius preexponential factor and activation energy were determined (±1 σ): A₁ = (6.89 ± 2.27) 10¹⁴ cm³ mol⁻¹ s⁻¹ and E_A,1 = 57.61 ± 2.05 kJ mol⁻−¹ The only other kinetic parameters reported for the reaction of Br atoms with neo‐C₅H₁₂ were obtained from competitive kinetic experiments relative to Br + C₂H₆. Comparison with our direct results is hampered by uncertainties in the kinetic data for the reference reaction that may need reinvestigation. The standard enthalpy of formation for the neo‐C₅H₁₁ radical was estimated to be 34.7 and 41.6 kJ mol⁻¹, depending on the value of the activation energy assumed for the reverse reaction neo‐C₅H₁₁ + HBr (−1). © 2000 John Wiley & Sons, Inc. Int J Chem Kinet 33: 49–55, 2001     

The standard molar enthalpy of formation at 298.15 K of VS1.043 by combustion calorimetry in fluorine

The standard molar enthalpy of formation Δ_fH_m^o of VS_1.043 has been determined by fluorine-combustion calorimetry. The result obtained, −(230.3±2.2) kJ·mol⁻¹ at 298.15 K and p^o = 101.325 kPa, differs significantly from values deduced from high-temperature studies.     

Remote Control of the Synthesis of a [2]Rotaxane and its Shuttling via Metal-Ion Translocation

Remote control in an eight-component network commanded both the synthesis and shuttling of a [2]rotaxane via metal-ion translocation, the latter being easily monitored by distinct colorimetric and fluorimetric signals. Addition of zinc(II) ions to the red colored copper-ion relay station rapidly liberated copper(I) ions and afforded the corresponding zinc complex that was visualized by a bright sky blue fluorescence at 460 nm. In a mixture of all eight components of the network, the liberated copper(I) ions were translocated to a macrocycle that catalyzed formation of a rotaxane by a double-click reaction of acetylenic and diazide compounds. The shuttling frequency in the copper-loaded [2]rotaxane was determined to k₂₉₈=30 kHz (ΔH^≠=62.3±0.6 kJ mol⁻¹, ΔS^≠=50.1±5.1 J mol⁻¹ K⁻¹, ΔG^≠₂₉₈=47.4 kJ mol⁻¹). Removal of zinc(II) ions from the mixture reversed the system back generating the metal-free rotaxane. Further alternate addition and removal of Zn²⁺ reversibly controlled the shuttling mode of the rotaxane in this eight-component network where the ion translocation status was monitored by the naked eye.     

The elimination kinetics and mechanisms of ethyl piperidine‐3‐carboxylate,ethyl 1‐methylpiperidine‐3‐carboxylate,and ethyl 3‐(piperidin‐1‐yl)propionate in the gas phase

The gas‐phase elimination kinetics of the above‐mentioned compounds were determined in a static reaction system over the temperature range of 369–450.3°C and pressure range of 29–103.5 Torr. The reactions are homogeneous, unimolecular, and obey a first‐order rate law. The rate coefficients are given by the following Arrhenius expressions: ethyl 3‐(piperidin‐1‐yl) propionate, log k₁(s^?1) = (12.79 ± 0.16) ? (199.7 ± 2.0) kJ mol^?1 (2.303 RT)^?1; ethyl 1‐methylpiperidine‐3‐carboxylate, log k₁(s^?1) = (13.07 ± 0.12)–(212.8 ± 1.6) kJ mol^?1 (2.303 RT)^?1; ethyl piperidine‐3‐carboxylate, log k₁(s^?1) = (13.12 ± 0.13) ? (210.4 ± 1.7) kJ mol^?1 (2.303 RT)^?1; and 3‐piperidine carboxylic acid, log k₁(s^?1) = (14.24 ± 0.17) ? (234.4 ± 2.2) kJ mol^?1 (2.303 RT)^?1. The first step of decomposition of these esters is the formation of the corresponding carboxylic acids and ethylene through a concerted six‐membered cyclic transition state type of mechanism. The intermediate β‐amino acids decarboxylate as the α‐amino acids but in terms of a semipolar six‐membered cyclic transition state mechanism. © 2005 Wiley Periodicals, Inc. Int J Chem Kinet 38: 106–114, 2006     

The cationic polymerization of fluoral—III. Thermodynamics of polymerization in solution

The equilibrium between fluoral in dichloromethane solution and live condensed liquid polyfluoral has been investigated between 22 and 43°C. Equilibrium monomer concentrations gave: ΔH_ac°(298 K) = -50-8 ± 2·3 kJ mol^?1 and ΔS_sc° (298 K) = -142·7 ± 7·4 J K^-1 mol^-1. With the aid of calibration and monomer vaporization data, thermodynamic values for the polymerization of liquid monomer to liquid polymer were also calculated: ΔH_tc° (298 K) = -47 ± 3 kJ mol^-1 and ΔS_1e° (298 K) = -97 ± 10 J K^-1 mol^-1.     

Rate constants and activation energies for ozonolysis of isoprene methacrolein and methyl‐vinyl‐ketone in aqueous solution: Significance to the in‐cloud ozonation of isoprene

Rate constants and activation energies for the reactions of ozone with isoprene, methacrolein, and methyl‐vinyl‐ketone in aqueous solution have been determined at temperatures from 5 to 30°C, using the stopped‐flow‐technique and monitoring ozone decay. The rate constants at 25°C and the activation energies have been found to be 4.1 (±0.2) × 10⁵ M⁻¹ s⁻¹ and 19.9 (±0.5) kJ mol⁻¹ for isoprene, 2.4 (±0.1) × 10⁴ M⁻¹ s⁻¹ and 23.9 (±0.5) kJ mol⁻¹ for methacrolein, and 4.4 (±0.2) × 10⁴ M⁻¹ s⁻¹ and 18.0 (±0.5) kJ mol⁻¹ for methyl‐vinyl‐ketone. A UV spectrum of a transient intermediate with a lifetime of about 15 s formed during the ozonation of isoprene was obtained in the range 220 to 300 nm. It rises steadily toward 220 nm. It is suggested that the spectrum can be attributed to the two unsaturated Criegee‐intermediates (carbonyl oxides), which would conceivably be stabilized by resonance. Lifetime considerations indicate that the oxidation of isoprene and its first‐generation reaction products, methacrolein and methyl‐vinyl‐ketone, by ozone and OH in the aqueous phase of a cloud environment play only a minor role compared to homogeneous gas‐phase processing. © 2001 John Wiley & Sons, Inc. Int J Chem Kinet 33: 182–190, 2001