Thermoresponsive Poly(2‐oxazine)s

The monomers 2‐methyl‐2‐oxazine (MeOZI), 2‐ethyl‐2‐oxazine (EtOZI), and 2‐n‐propyl‐2‐oxazine (nPropOZI) were synthesized and polymerized via the living cationic ring‐opening polymerization (CROP) under microwave‐assisted conditions. pEtOZI and pnPropOZI were found to be thermoresponsive, exhibiting LCST behavior in water and their cloud point temperatures (T_CP) are lower than for poly(2‐oxazoline)s with similar side chains. However, comparison of poly(2‐oxazine) and poly(2‐oxazoline)s isomers reveals that poly(2‐oxazine)s are more water soluble, indicating that the side chain has a stronger impact on polymer solubility than the main chain. In conclusion, variations of both the side chains and the main chains of the poly(cyclic imino ether)s resulted in a series of distinct homopolymers with tunable T_CP.     

Rate constants of the thermal cis‐trans isomerization of azobenzene dyes in solvents,acetone/water mixtures,and in microheterogeneous surfactant solutions

Rate constants k_iso of the thermal cis‐trans isomerization of four 4,4’‐nitro‐aminoazobenzenes with different amino groups have been determined in homogeneous aprotic solvents and polyglykol oligomers, primarily by means of conventional flash photolysis. The rate constants have been correlated with polarity (according to λ_max from UV/Vis absorption spectra of the trans isomers) and bulk viscosity of the solvents. Qualitative conclusions about the influence of varying concentrations of water with respect to polarity and hydrogen bonding on k_iso‐ and λ_max‐values in acetone/water mixtures were derived. Based on these results the data from microheterogeneous solutions have been interpreted. In microheterogeneous water/surfactant solutions k_iso‐values of selected azo dyes were strongly dependent on the concentrations of SDS, Triton^®X‐100, C₁₂EO₈ in water, and varied with the composition of bicontinuous microemulsions of Igepal^® CA‐520/ heptane/water. The large spread of isomerization rate constants is in part due to varying microviscosity. Replacement of H₂O by D₂O in aqueous surfactant solutions produced surprisingly large kinetic solvent isotope effects. © 1999 John Wiley & Sons, Inc. Int J Chem Kinet 31: 337–350, 1999     

A steroidal phenyldi­hydro‐1,3‐oxazine derivative

The structure of methyl (6R)‐6‐(3′β‐acetoxy‐5′‐androsten‐17′β‐yl)‐2‐phenyl‐5,6‐dihydro‐4H‐[1,3]oxazine, C₃₁H₄₁NO₃, synthesized from an azidopregnene derivative, is reported. The di­hydro‐1,3‐oxazine ring is connected in the β position to the sterane skeleton at C‐17′. An R configuration was found at C‐6.     

An organic photochromic compound: (2S)‐2′‐ethoxy‐1,3,3‐trimethyl‐6′‐(piperidin‐1‐yl)spiro[indoline‐2,3′‐3′H‐naphtho[2,1‐b][1,4]oxazine]

In the course of our synthesis of hybrid photochromic compounds, the unexpected new organic photochromic title compound, C₂₉H₃₃N₃O₂, (I), was obtained. It is a derivative of the parent spirooxazine 1,3,3‐trimethyl‐6′‐(piperidin‐1‐yl)spiro[indoline‐2,3′‐3′H‐naphtho[2,1‐b][1,4]oxazine], (II). The 2′‐ethoxy group gives (I) different photochromic properties from its parent spirooxazine (II).     

One‐Pot,Three‐Component Synthesis of Novel Spiro[3H‐indole‐3,2′‐thiazolidine]‐2,4′(1H)‐diones in an Ionic Liquid as a Reusable Reaction Media

A facile one‐pot, three‐component protocol for the synthesis of novel spiro[3H‐indole‐3,2′‐thiazolidine]‐2,4′(1H)‐diones by condensing 1H‐indole‐2,3‐diones, 4H‐1,2,4‐triazol‐4‐amine and 2‐sulfanylpropanoic acid in [bmim]PF₆ (1‐butyl‐3‐methyl‐1H‐imidazolium hexafluorophosphate) as a recyclable ionic‐liquid solvent gave good to excellent yields in the absence of any catalyst (Scheme 1 and Table 2). The advantages of this protocol over conventional methods are the mild reaction conditions, the high product yields, a shorter reaction time, as well as the eco‐friendly conditions.     

DFT study of nitroxide radicals: explicit modeling of solvent effects on the structural and electronic characteristics of 4‐amino‐2,2,6,6‐tetramethyl‐piperidine‐N‐oxyl

An explicit DFT modeling of water surroundings on the electron paramagnetic resonance properties of 4‐amino‐2,2,6,6‐tetramethyl‐piperidine‐N‐oxyl (TA) has been performed. A stepwise hydration of TA is accompanied with certain changes in geometrical parameters (bond lengths and angles) and redistribution of partial electric charges in TA. An aqueous cluster of 45 water molecules can be considered as an appropriate model for a complete aqueous shell around TA, although most of the structural and electronic characteristics of TA already converge at about 10 water molecules. Water surroundings induce an increase in electron spin density on the nitrogen atom of the nitroxide fragment due to stabilization of the polar resonance structure > N^+?? O^? at the expense of less polar structure > N? O^?. The water‐induced rise of the isotropic splitting constant a_iso, calculated from the contact term of the hyperfine interaction, comprises Δa_iso(ρ_N2) = 2.2–2.5 G, which is typical of experimental value for TA. There are two contributions to the solvent effect on the a_iso(ρ_N2) value: the redistribution of spin density in the nitroxide fragment (polarity effect) and water‐induced distortions of TA geometry. Microscopic variations in a hydrogen‐bonded water network cause noticeable fluctuations of the splitting constant a_iso(ρ_N2). Calculations of the atomic spin density (σ_N2) allowed us to compute the splitting constant from the relationship a_iso(σ_N2) = Qσ_N2, where Q = 36.2 G. A practical advantage of using this relationship is that it gives ‘smoothed’ values of the splitting constant, which are sensitive to the environment polarity but remain tolerant to microscopic fluctuations of the hydrogen‐bonded water network around a spin‐label molecule. Copyright © 2010 John Wiley & Sons, Ltd.     

Bonding,Aromaticity and Isomerization of Furfuraldehyde through Off-Nucleus Isotropic Magnetic Shielding

Off-nucleus isotropic magnetic shielding (σ_iso(r)) and multi-points nucleus independent chemical shift (NICS(0-2 Å)) index were utilized to find the impacts of the isomerization of gas-phase furfuraldehyde (FD) on bonding and aromaticity of FD. Multidimensional (1D to 3D) grids of ghost atoms (bqs) were used as local magnetic probes to evaluate σ_iso(r) through gauge-including atomic orbitals (GIAO) at density functional theory (DFT) and B3LYP functional/6-311+G(d,p) basis set level of theory. 1D σ_iso(r) responses along each bond of FD were examined. Also, a σ_iso(r) 2D-scan was performed to obtain σ_iso(r) behavior at vertical heights of 0–1 Å above the FD plane in its cis, transition state (TS) and trans forms. New techniques for evaluating 2D σ_iso(r) cross-sections are also included. Our findings showed that bonds in cyclic and acyclic parts of FD are dissimilar. Unlike the C−O bond of furanyl, the C=O bond of the formyl group is magnetically different. C−C and C−H bonds in furanyl are found similar to those in aromatic rings. A unique σ_iso(r) trend was observed for the C₂−C₆ bond during FD isomerization. Based on NICS(0-2 Å) values, the degree of aromaticity follows the order of cis FD<trans FD<furan<TS FD.     

1‐Acetyl‐3′‐(4‐bromophenyl)‐3′‐chlorospiro[3H‐indole‐3,2′‐oxetan]‐2(1H)‐one

In the title compound, C₁₈H₁₃BrClNO₃, the heterocyclic ring of the indole is distorted from planarity towards an envelope conformation. The orientations of the indole, oxetane, chloro and bromo­phenyl substituents are conditioned by the sp³ states of the spiro‐junction and the Cl‐attached C atoms.     

A Convenient Synthetic Route to Spiro[indole‐3,4′‐piperidin]‐2‐ones

Starting from 1‐[(tert‐butoxy)carbonyl]piperidine‐4‐carboxylic acid and 2‐bromoaniline, the spiro[indole‐3,4′‐piperidin]‐2‐one system was obtained in three high‐yielding steps: anilide formation, N(1)‐protection, and intramolecular cyclization under Pd catalysis as the key reaction. The preparation of the corresponding 2‐bromoanilide was studied. In extension, the same sequence was developed with 4‐methyl‐ and 4‐nitro‐2‐bromoaniline. In the key step, the NO₂ group led to a rather diminished yield. The transformation of the protected spiro[indole‐3,4′‐piperidin]‐2‐one to the corresponding unprotected dihydroindoles is discussed.     

Deep‐blue light‐emitting polyfluorenes containing spiro[fluorene‐9,9′‐thioxanthene‐S,S‐dioxide] isomers

Blue light‐emitting polyfluorenes, PPF‐FSOs and PPF‐SOFs were synthesized via introducing spiro[fluorene‐9,9′‐thioxanthene‐S,S‐dioxide] isomers (2,7‐diyl and 2′,7′‐diyl) (FSO/SOF) into the poly[9,9‐bis(4‐(2‐ethylhexyloxy) phenyl)fluorene‐2,7‐diyl] (PPF) backbone, respectively. With the increasing contents of FSO and SOF moieties, the absorption and PL spectra of PPF‐FSOs show slight red shift, while that of PPF‐SOFs exhibit blue shift, respectively. The HOMO and LUMO levels reduce gradually with increasing SOF unit in PPF‐SOFs. The polymers emit blue light peaked around 430–445 nm and show an excellent spectral stability with the variation in current densities. The distinctly narrowing EL spectra were observed with the incorporation of isomers in the polymers. The full width at half maximum reduced by 15 nm for PPF‐SOFs, resulting in a blue shift with the CIE coordinates from (0.16, 0.11) to (0.16, 0.08). With a device configuration of ITO/PEDOT:PSS/EML/CsF/Al, a maximum luminance efficiency (LE_max) of 2.00 cd A^?1, a maximum external quantum efficiency (EQE_max) of 3.76% with the CIE coordinates of (0.16, 0.08) for PPF‐SOF15 and a LE_max of 1.68 cd A^?1, a EQE_max of 2.38% with CIE (0.16, 0.12) for PPF‐FSO10 were obtained, respectively. The result reveals that spiro[fluorene‐9,9′‐thioxanthene‐S,S‐dioxide] isomers are promising blocks for deep‐blue light‐emitting polymers. © 2017 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2017 , 55 , 2332–2341     

A New Four‐Component Reaction for the Synthesis of Spiro[4H‐indeno[1,2‐b]pyridine‐4,3′‐[3H]indoles]

A new four‐component synthesis of spiro[4H‐indeno[1,2‐b]pyridine‐4,3′‐[3H]indoles] and spiro[acenaphthylene‐1(2H),4′‐[4H‐indeno[1,2‐b]pyridines] by the reaction of indane‐1,3‐dione, 1,3‐dicarbonyl compounds, isatins (=1H‐indole‐2,3‐diones) or acenaphthylene‐1,2‐dione, and AcONH₄ in refluxing toluene in the presence of a catalytic amount of pyridine is reported.     

Synthesis of sugar‐based macromolecules via sono‐ATRP in miniemulsion

Ultrasound‐mediated atom transfer radical polymerization (sono‐ATRP) in miniemulsion media is used for the first time for the preparation of complex macromolecular architectures by a facile two‐step synthetic route. Initially, esterification reaction of sucrose or lactulose with α‐bromoisobutyryl bromide (BriBBr) is conducted to receive multifunctional ATRP macroinitiators with 8 initiation sites, followed by polymerization of n‐butyl acrylate (BA) forming arms of the star‐like polymers. The brominated lactulose‐based molecule was examined as an ATRP initiator by determining the activation rate constant (k_a) of the catalytic process in the presence of a copper(II) bromide/tris(2‐pyridylmethyl)amine (Cu^IIBr₂/TPMA) catalyst in both organic solvent and for the first time in miniemulsion media, resulting in k_a = (1.03 ± 0.01) × 10⁴ M^?1 s^?1 and k_a = (1.16 ± 0.56) × 10³ M^?1 s^?1, respectively. Star‐like macromolecules with a sucrose or lactulose core and poly(n‐butyl acrylate) (PBA) arms were successfully received using different catalyst concentration. Linear kinetics and a well‐defined structure of synthesized polymers reflected by narrow molecular weight distribution (M_w/M_n = 1.46) indicated 105 ppm wt of catalyst loading as concentration to maintain controlled manner of polymerization process. ¹H NMR analysis confirms the formation of new sugar‐inspired star‐shaped polymers.     

Reaktionen von Pentafulven‐Komplexen des Titans mit Nitrilen und iso‐Nitrilen — Synthese und Isomerisierungen von σ, π‐Chelatkomplexen mit Cp∼N‐Liganden

Reactions of Pentafulvene Complexes of Titanium with Nitriles and iso‐Nitriles — Synthesis and Isomerizations of σ, π‐Chelat Complexes with Cp∼N‐Ligands The reactions of fulvene complexes Cp*Ti{η⁶—C₅H₄=C(R)(R')}Cl (R = H, R' = tBu ( 1 ); R = Me, R' = iPr ( 4 )) with nitriles and iso‐nitriles, leading to σ, π‐chelat complexes with Cp∼N‐ligands, have been examined and the formed products characterized. Whereas in the reactions of 1 and 4 , respectively, with nitriles a 1, 2‐mono‐insertion of the CN‐group in the Ti—C(R)(R') (Fv) bond is observed, the reaction with iso‐nitrils leads to the insertion of two molecules iso‐nitrile. The nitrile insertion product of 1 is characterized by an imine‐enamine tautomerization. Whereas the primary built meta stable imine species ( 3 ) was only identified by NMR measurements in solution, the enamine tautomer ( 2 ) crystallized from n‐hexane, so that the crystal structure could be determined. The primary formed iminoacyl complex ( 7 ) rearranges due to the electrophilicity of the titanium centre and builds a Ti—N bond with significant N(pπ) → Ti(dπ) bonding character.     

Facile synthesis of heat‐resistant and photoluminescent poly(N‐aryleneindole ether)s via catalyst‐free C?N/C?O coupling reaction

We present here a novel programmable polymerization route for the synthesis of new indole‐based polymers via a catalyst‐free nucleophilic substitution reaction. The polycondensation of 4‐hydroxyindole with different activated difluoro monomers undergoes in N‐methylpyrrolidinone, affording soluble poly(N‐aryleneindole ether)s (PEINs) with high molecular weights (M_w up to 486,000) in high yields (up to 96%). The structures of the polymers are characterized by means of FT‐IR, ¹H NMR spectroscopy and elemental analysis, the results show good agreement with the proposed structures. The resulting polymers are processable and enjoy high glass transition temperatures (T_gs > 180 °C) and thermal stability (T_ds > 420 °C). Thin films of PEINs show great mechanical behaviors with high tensile strength up to 104 Mpa, and good optical transparency. In addition, due to the indole moieties in the main chains, all these PEINs are endowed with significantly strong photonic luminescence in chloroform and display highly solvent‐dependent emission bands. Especially, the polymer PEIN‐3 carrying sulfonyl units, shows outstanding blue‐light emission with high quantum yields (45.2%, determined against quinine sulfate). The results obtained by cyclic voltammetry suggest that PEINs possess good electroactivity. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2014 , 52, 313–320     

Oxygen‐binding Protein Fiber and Microgel: Supramolecular Myoglobin–Poly(acrylate) Conjugates

A supramolecular conjugate of myoglobin (Mb) and water‐soluble poly(acrylate), (PA_5k and PA_25k, where 5k and 25k represent the molecular weight of the polymers, respectively), is constructed on the basis of a noncovalent heme‐heme pocket interaction. The modified heme with an amino group linked to the terminus of one of the heme‐propionates is coupled to the side‐chain carboxyl groups of poly(acrylate) activated by N‐hydroxysuccinimide. The ratios of the heme‐modified monomer unit and the unmodified monomer unit (m:n) in the polymer chains of Heme‐PA_5k and Heme‐PA_25k were determined to be 4.5:95.5 and 3.1:96.9, respectively. Subsequent addition of apoMb to the conjugated polymers provides Mb‐connected fibrous nanostructures confirmed by atomic force microscopy. A mixture of the heme‐modified polymer and dimeric apomyoglobin as a cross‐linker forms a microgel in which the reconstituted myoglobin retains its native exogenous ligand binding activity.     

Conformational Relaxation of p‐Phenylenevinylene Trimers in Solution Studied by Picosecond Time‐Resolved Fluorescence

Two p‐phenylenevinylene (PV) trimers, containing 3′‐methylbutyloxyl (in MBOPV3) and 2′‐ethylhexyloxyl (in EHOPV3) side chains, are used as model compounds of PV‐based conjugated polymers (PPV) with the purpose of clarifying the origin of fast (picosecond time) components observed in the fluorescence decays of poly[2‐methoxy‐5‐(2′‐ethylhexyloxy)‐p‐phenylenevinylene] (MEH‐PPV). The fluorescence decays of MBOPV3 and EHOPV3 reveal the presence of similar fast components, which are assigned to excited‐state conformational relaxation of the initial population of non‐planar trimer conformers to lower‐energy, more planar conformers. The rate constant of conformational relaxation k_CR is dependent on solvent viscosity and temperature, according to the empirical relationship k_CR=aη_o^?α?exp(?αE_η/RT), where aη_o^?α is the frequency factor, η_o is the pre‐exponential coefficient of viscosity, E_η is the activation energy of viscous flow. The empirical parameter α, relating the solvent microscopic friction involved in the conformational change to the macroscopic solvent friction (α=1), depends on the side chain. The fast component in the fluorescence decays of MEH‐PPV polymers (PPVs), is assigned to resonance energy transfer from short to longer polymer segments. The present results call for revising this assignment/interpretation to account for the occurrence of conformational relaxation, concurrently with energy transfer, in PPVs.     

Synthesis of spiro[indoline‐3,3′‐pyrrolizines] by 1,3‐dipolar reactions between isatins,l‐proline and electron‐deficient alkenes

Two spiro[indoline‐3,3′‐pyrrolizine] derivatives have been synthesized in good yield with high regio‐ and stereospecificity using one‐pot reactions between readily available starting materials, namely l ‐proline, substituted 1H‐indole‐2,3‐diones and electron‐deficient alkenes. The products have been fully characterized by elemental analysis, IR and NMR spectroscopy, mass spectrometry and crystal structure analysis. In (1′RS ,2′RS ,3SR ,7a′SR )‐2′‐benzoyl‐1‐hexyl‐2‐oxo‐1′,2′,5′,6′,7′,7a′‐hexahydrospiro[indoline‐3,3′‐pyrrolizine]‐1′‐carboxylic acid, C₂₈H₃₂N₂O₄, (I), the unsubstituted pyrrole ring and the reduced spiro‐fused pyrrole ring adopt half‐chair and envelope conformations, respectively, while in (1′RS ,2′RS ,3SR ,7a′SR )‐1′,2′‐bis(4‐chlorobenzoyl)‐5,7‐dichloro‐2‐oxo‐1′,2′,5′,6′,7′,7a′‐hexahydrospiro[indoline‐3,3′‐pyrrolizine], which crystallizes as a partial dichloromethane solvate, C₂₈H₂₀Cl₄N₂O₃·0.981CH₂Cl₂, (II), where the solvent component is disordered over three sets of atomic sites, these two rings adopt envelope and half‐chair conformations, respectively. Molecules of (I) are linked by an O—H…·O hydrogen bond to form cyclic R ₆⁶(48) hexamers of (S ₆) symmetry, which are further linked by two C—H…O hydrogen bonds to form a three‐dimensional framework structure. In compound (II), inversion‐related pairs of N—H…O hydrogen bonds link the spiro[indoline‐3,3′‐pyrrolizine] molecules into simple R ₂²(8) dimers.     

Iodine‐Catalyzed Synthesis of Spiro[1,3,4‐benzotriazepine‐2,3′‐indole]‐2′,5(1H,1′H)‐diones under Mild Conditions

The I₂‐catalyzed preparation of spiro[1,3,4‐benzotriazepine‐2,3′‐indole]‐2′,5(1H,1′H)‐diones from 2‐aminobenzohydrazide and isatins in MeCN at room temperature in good‐to‐excellent yields is described. The structure of 3 was corroborated spectroscopically (IR, ¹H‐ and ¹³C‐NMR, and EI‐MS data). A plausible mechanism for this type of reaction is proposed (Scheme 2).     

Helical polyacetylenes carrying 2,2,6,6‐tetramethyl‐1‐piperidinyloxy and 2,2,5,5‐tetramethyl‐1‐pyrrolidinyloxy moieties: Their synthesis,properties, and function

2,2,6,6‐Tetramethyl‐1‐piperidinyloxy (TEMPO)‐ and 2,2,5,5‐tetramethyl‐1‐pyrrolidinyloxy (PROXYL)‐containing (R)‐1‐methylpropargyl TEMPO‐4‐carboxylate ( 1 ), (R)‐1‐methylpropargyl PROXYL‐3‐carboxylate ( 2 ), (rac)‐1‐methylpropargyl PROXYL‐3‐carboxylate ( 3 ), (S)‐1‐propargylcarbamoylethyl TEMPO‐4‐carboxylate ( 4 ), and (S)‐1‐propargyloxycarbonylethyl TEMPO‐4‐carboxylate ( 5 ) (TEMPO, PROXYL) were polymerized to afford novel polymers containing the TEMPO and PROXYL radicals at high densities. Monomers 1–3 and 5 provided polymers with moderate number‐average molecular weights of 8200–140,900 in 49–97% yields in the presence of (nbd)Rh⁺[η⁶‐C₆H₅B^?(C₆H₅)₃], whereas 4 gave no polymer with this catalyst but gave polymers possessing low M_n (3800–7500) in 56–61% yield with [(nbd)RhCl]₂‐Et₃N. Poly( 1 ), poly( 2 ), and poly( 4 ) took a helical structure with predominantly one‐handed screw sense in THF and CHCl₃ as well as in film state. The helical structure of poly( 1 ) and poly( 2 ) was stable upon heating and addition of MeOH, whereas poly( 4 ) was responsive to heat and solvents. All of the free radical‐containing polymers displayed the reversible charge/discharge processes, whose capacities were in a range of 43.2–112 A h/kg. In particular, the capacities of poly( 2 )–poly( 5 )‐based cells reached about 90–100% of the theoretical values regardless of the secondary structure of the polymer, helix and random. Poly( 1 ), poly( 2 ), and poly( 4 ) taking a helical structure exhibited better capacity tolerance towards the increase of current density than nonhelical poly( 3 ) and poly( 5 ) did. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 5431–5445, 2007     

Eight 7‐benzyl‐3‐tert‐butyl‐1‐phenylpyrazolo[3,4‐d]oxazines,encompassing structures containing no intermolecular hydrogen bonds,and hydrogen‐bonded structures in one,two or three dimensions

7‐Benzyl‐3‐tert‐butyl‐1‐phenyl‐6,7‐dihydro‐1H,4H‐pyrazolo[3,4‐d][1,3]oxazine, C₂₂H₂₅N₃O, (I), and 3‐tert‐butyl‐7‐(4‐methylbenzyl)‐1‐phenyl‐6,7‐dihydro‐1H,4H‐pyrazolo[3,4‐d][1,3]oxazine, C₂₃H₂₇N₃O, (II), are isomorphous in the space group P2₁, and molecules are linked into chains by C—H...O hydrogen bonds. In each of 3‐tert‐butyl‐7‐(4‐methoxybenzyl)‐1‐phenyl‐6,7‐dihydro‐1H,4H‐pyrazolo[3,4‐d][1,3]oxazine, C₂₃H₂₇N₃O₂, (III), which has cell dimensions rather similar to those of (I) and (II), also in P2₁, and 3‐tert‐butyl‐1‐phenyl‐7‐[4‐(trifluoromethyl)benzyl]‐6,7‐dihydro‐1H,4H‐pyrazolo[3,4‐d][1,3]oxazine, C₂₃H₂₄F₃N₃O, (IV), there are no direction‐specific interactions between the molecules. In 3‐tert‐butyl‐7‐(4‐nitrobenzyl)‐1‐phenyl‐6,7‐dihydro‐1H,4H‐pyrazolo[3,4‐d][1,3]oxazine, C₂₂H₂₄N₄O₃, (V), a combination of C—H...O and C—H...N hydrogen bonds links the molecules into complex sheets. There are no direction‐specific interactions between the molecules of 3‐tert‐butyl‐7‐(2,3‐dimethoxybenzyl)‐1‐phenyl‐6,7‐dihydro‐1H,4H‐pyrazolo[3,4‐d][1,3]oxazine, C₂₄H₂₉N₃O₃, (VI), but a three‐dimensional framework is formed in 3‐tert‐butyl‐7‐(3,4‐methylenedioxybenzyl)‐1‐phenyl‐6,7‐dihydro‐1H,4H‐pyrazolo[3,4‐d][1,3]oxazine, C₂₃H₂₅N₃O₃, (VII), by a combination of C—H...O, C—H...N and C—H...π(arene) hydrogen bonds, while a combination of C—H...O and C—H...π(arene) hydrogen bonds links the molecules of 3‐tert‐butyl‐1‐phenyl‐7‐(3,4,5‐trimethoxybenzyl)‐6,7‐dihydro‐1H,4H‐pyrazolo[3,4‐d][1,3]oxazine, C₂₅H₃₁N₃O₄, (VIII), into complex sheets. In each compound, the oxazine ring adopts a half‐chair conformation, while the orientations of the pendent phenyl and tert‐butyl substituents relative to the pyrazolo[3,4‐d]oxazine unit are all very similar.