1,2‐Bis(trifluoromethyl)ethene‐1,2‐dicarbonitrile: Enol Ethers and Ketene Acetals as Cycloaddition Partners

(E)‐ and (Z)‐1,2‐bis(trifluoromethyl)ethene‐1,2‐dicarbonitrile ((E)‐ and (Z)‐BTE, resp., =(E)‐ and (Z)‐2,3‐bis(trifluoromethyl)but‐2‐enedinitrile) were used as a stereochemical probe in studying (2+2) cycloadditions of acceptor with donor alkenes. The additions to methyl (E)‐ and (Z)‐propenyl ether gave rise to the eight conceivable cyclobutanes 8 , although in different ratios in reactions of (E)‐ and (Z)‐BTE. The ¹⁹F‐NMR data served the structural assignment and the quantitative analysis. The mechanistic discussion is based on rotations and ring closures of the assumed 1,4‐zwitterionic intermediates. Dimethylketene dimethyl acetal, methylketene dimethyl acetal, and ketene diethyl acetal show an increasing rate in their reactions with BTE as well as in the equilibration of the cycloadducts.     

Two‐ and Three‐Component Reactions Leading to New Enamines Derived from 2,3‐Dicyanobut‐2‐enoates

The three‐component reactions of 1‐azabicyclo[1.1.0]butanes 1 , dicyanofumarates (E)‐ 5 , and MeOH or morpholine yielded azetidine enamines 8 and 9 with the cis‐orientation of the ester groups at the C?C bond ((E)‐configuration; Schemes 3 and 4). The structures of 8a and 9d were confirmed by X‐ray crystallography. The formation of the products is explained via the nucleophilic addition of 1 onto (E)‐ 5 , leading to a zwitterion of type 7 (Scheme 2), which is subsequently trapped by MeOH or morpholine ( 10a ), followed by elimination of HCN. Similarly, two‐component reactions between secondary amines 10a – 10c and (E)‐ 5 gave products 12 with an (E)‐enamine structure and (Z)‐oriented ester groups. On the other hand, two‐component reactions involving primary amines 10d – 10f or NH₃ led to the formation of the corresponding (Z)‐enamines, in which the (E)‐orientation of ester groups was established.     

Adaptative Biaryl Phosphite–Oxazole and Phosphite–Thiazole Ligands for Asymmetric Ir‐Catalyzed Hydrogenation of Alkenes

A library of readily available phosphite–oxazole/thiazole ligands ( L1 a – g – L7 a – g ) was applied in the Ir‐catalyzed asymmetric hydrogenation of several largely unfunctionalized E‐ and Z‐trisubstituted and 1,1‐disubstituted terminal alkenes. The ability of the catalysts to transfer chiral information to the product could be tuned by choosing suitable ligand components (bridge length, the substituents in the heterocyclic ring and the alkyl backbone chain, the configuration of the ligand backbone, and the substituents/configurations in the biaryl phosphite moiety), so that enantioselectivities could be maximized for each substrate as required. Enantioselectivities were therefore excellent (enantiomeric excess (ee) values up to >99 %) for a wide range of E‐ and Z‐trisubstituted and 1,1‐disubstituted terminal alkenes. The biaryl phosphite moiety was a very advantageous ligand component in terms of substrate versatility.     

Annulenoide Tetrathiafulvalene:, 5,16‐Bis(1,3‐benzodithiol‐2‐yliden)‐5,16‐dihydrotetraepoxy‐ und 5,16‐Bis(1,3‐benzodithiol‐2‐yliden)‐5,16‐dihydrotetraepithio[22]annulene(2.1.2.1)

Annulenoid Tetrathiafulvalenes: 5,16‐Bis(1,3‐benzodithiol‐2‐ylidene)‐5,16‐dihydrotetraepoxy‐ and 5,16‐Bis(1,3‐benzodithiol‐2‐ylidene)‐5,16‐dihydrotetraepithio[22]annulenes(2.1.2.1) The title compounds are among the first tetrathiafulvalenes with annulene spacers, here with tetraepoxy‐[22]annulene(2.1.2.1) (see 3a ), tetraepithio[22]annulene(2.1.2.1) (see 3b ), and diepithiodiepoxy[22]annulene(2.1.2.1) (see 23 ) units. The annulenoid tetrathiafulvalenes 3a and 3b are prepared by cyclizing McMurry coupling of the 5,5′‐(1,3‐benzodithiol‐2‐ylidenemethylene)bis[furan‐ or thiophene‐2‐carbaldehydes] ( 8a or 8b , resp.) or by Wittig reaction of (1,3‐benzodithiol‐2‐yl)tributylphosphonium tetrafluoroborate ( 13b ) with tetraepoxy[22]annulene(2.1.2.1)‐1,12‐dione 20 (formation of 3a ) or diepithiodiepoxy[22]annulene(2.1.2.1)‐1,12‐dione 22 (formation of 23 ). The annulenoide tetrathiafulvalene 3a is obtained as a mixture of the isomers (E,E)‐ and (Z,Z)‐ 3a . At 130°, (Z,Z)‐ 3a rearranges quantitatively into the (E,E)‐isomer. Isomer (E,E)‐ 3a is a dynamic molecule, where the (E)‐ethene‐1,2‐diyl bridges rotate around the adjacent σ‐bonds. The tetraepithioannulene derivative 3b as well as 23 only exist in the (Z,Z)‐configuration. The oxidation of (E,E/Z,Z)‐ 3a with Br₂ yields the annulene‐bridged tetrathiafulvalene dication (E,E)‐ 3a _Ox, while with 4,5‐dichloro‐3,6‐dioxocyclohexa‐1,4‐diene‐1,2‐dicarbonitrile (DDQ) obviously only the radical cation 3a _Sem is formed, which belongs to the class of cyanine‐like violenes. The annulenoide tetrathiafulvalenes 3b and 23 , which exist only in the (Z,Z)‐configuration, obviously for steric reasons, cannot be oxidized by DDQ. Electrochemical studies are in agreement with these results.     

A New Monomer for π‐Conjugated Polymers — Synthesis and Characterization of Bis((Z)‐5‐phenyl‐2‐phenylmethylidene‐1, 3‐dithiole‐4‐yl)monosulfane

Bis((Z)‐5‐phenyl‐2‐phenylmethylidene‐1, 3‐dithiole‐4‐yl)monosulfane ( 6 ), a molecule consisting of two diphenyldithiafulvene units connected by a sulfur bridge, was synthesized by the selective lithiation of (Z)‐4‐phenyl‐2‐phenylmethylidene‐1, 3‐dithiole ( 7a ) at the endocyclic double bond and by subsequent reaction of the lithiated intermediate with bis(phenylsulfonyl)sulfane. Since this reaction sequence proceeded with retention of configuration, of three possible isomers (E, E, Z, E, and Z, Z) only the Z, Z form was obtained. On the basis of the X‐ray structure analysis and the NMR‐spectroscopic characterization of 6 supplemented by the NMR parameters of (E)‐ and (Z)‐4‐phenyl‐2‐phenylmethylidene‐1, 3‐dithiole, it was demonstrated that two characteristic ⁵J coupling constants of the proton at the exocyclic double bond indicate the configuration (Z or E) of disubstituted dithiafuvene derivatives.     

New Results in Homoheptalene Chemistry

The thermal reaction of homoazulene (=bicyclo[5.3.1]undeca‐1,3,5,7,9‐pentaene; 2 ) with dimethyl acetylenedicarboxylate (ADM) in 1,2‐dichloroethane (ClCH₂CH₂Cl) results, in contrast to an earlier report [5], in formation of not only dimethyl homoheptalene‐4,5‐dicarboxylate (=bicyclo[5.5.1]trideca‐1,3,5,7,9,11‐hexaene‐4,5‐dicarboxylate; 3 ), but also of a 4 : 1 mixture of 3 and dimethyl homoheptalene‐2,3‐dicarboxylate ( 13 ) in almost quantitative yield (Schemes 1 and 3). The structures of both homoheptalenes have been corroborated by X‐ray crystal‐structure analysis (Fig. 5). The double‐bond‐shifted (DBS) isomers 3 ′ and 13 ′ of 3 and 13 , respectively, could not be detected in their ¹H‐NMR spectra (600 MHz threshold of detection ≥0.5%), in agreement with the AM1‐calculated ΔH values of the four isomeric homoheptalene‐dicarboxylates (cf. Table 4). Vilsmeyer formylation of homoazulene ( 2 ) gave homoazulene‐8‐carbaldehyde ( 14 ) in a yield of 67%, which, on treatment with benzylidene‐(triphenyl)‐λ⁵‐phosphane, gave, in almost quantitative yield, a 1.6 : 1 mixture of (Z)‐ and (E)‐8‐styrylhomoazulene ((Z)‐ 15 and (E)‐ 15 , resp.). Thermal reaction of the latter mixture with ADM in 1,2‐dichloroethane led, in a yield of 42%, to a 5 : 1 mixture of dimethyl (Z)‐ and (E)‐2‐styrylhomoheptalene‐4,5‐dicarboxylate ((Z)‐ 15 and (E)‐ 16 , resp.). Both isomers were separated by column chromatography on silica gel. Again, the DBS isomers of (Z)‐ 16 and (E)‐ 16 , i.e., (Z)‐ 16 ′ and (E)‐ 16 ′, could not be detected in the ¹H‐NMR spectra (600 MHz) of pure (Z)‐ 16 and (E)‐ 16 .     

Quinolone Analogs 13: Synthesis of Novel 1,1′‐(2‐Methylenepropane‐1,3‐diyl)di(4‐quinolone‐3‐carboxylate) and Related Compounds

The reaction of the 4‐hydroxyquinoline‐3‐carboxylate 6 with pentaerythritol tribromide gave the 1,1′‐(2‐methylenepropane‐1,3‐diyl)di(4‐quinolone‐3‐carboxylate) 11 , whose reaction with bromine afforded the 1,1′‐(2‐bromo‐2‐bromomethylpropane‐1,3‐diyl)di(4‐quinolone‐3‐carboxylate) 12 . Compound 12 was transformed into the (Z)‐1,1′‐(2‐acetoxymethylpropene‐1,3‐diyl)di(4‐quinolone‐3‐carboxylate) 13 or (E)‐1,1′‐[2‐(imidazol‐1‐ylmethyl)propene‐1,3‐diyl]di(4‐quinolone‐3‐carboxylate) 14 . Hydrolysis of the dimer (Z)‐ 13 or (E)‐ 14 with potassium hydroxide provided the (E)‐1,1′‐(2‐hydroxymethylpropene‐1,3‐diyl)di(4‐quinolone‐3‐carboxylic acid) 15 or (Z)‐1,1′‐[2‐(imidazol‐1‐ylmethyl)propene‐1,3‐diyl]di(4‐quinolone‐3‐carboxylic acid) 16 , respectively. The nuclear Overhauser effect (NOE) spectral data supported that those hydrolysis resulted in the geometrical conversion of (Z)‐ 13 into (E)‐ 15 or (E)‐ 14 into (Z)‐ 16 .     

Hydroalumination‐Brominolysis of Vinylalkynols: A Novel Entry to (E)‐ and (Z)‐Bromoalkadienols,and Bromoallenols

Hydroalumination‐brominolysis of vinylacetylenic alcohols 1 – 4 provides a novel entry to synthetically useful (E)‐ and (Z)‐bromoalkadienols, and bromoallenols, which are otherwise hardly accessible. An electrophilic cleavage of cyclic intermediate A follows competing mechanistic pathways, giving rise to isomeric (Z)‐bromodienols 5 – 8 and allenic alcohols 9 – 12 . The latter are stereoselectively converted to (E)‐bromoalkadienols 13 – 16 by CuBr‐catalyzed anionotropic rearrangement.     

Pentiptycene‐Derived Light‐Driven Molecular Brakes: Substituent Effects of the Brake Component

Five pentiptycene‐derived stilbene systems ( 1 R ; R =H, OM, NO, Pr, and Bu) have been prepared and investigated as light‐driven molecular brakes that have different‐sized brake components ( 1 H < 1 OM < 1 NO < 1 Pr < 1 Bu ). At room temperature (298 K), rotation of the pentiptycene rotor is fast (k_rot=10⁸–10⁹ s^?1) with little interaction with the brake component in the trans form ((E)‐ 1 R ), which corresponds to the brake‐off state. When the brake is turned on by photoisomerization to the cis form ((Z)‐ 1 R ), the pentiptycene rotation can be arrested on the NMR spectroscopic timescale at temperatures that depend on the brake component. In the cases of (Z)‐ 1 NO , (Z)‐ 1 Pr , and (Z)‐ 1 Bu , the rotation is nearly blocked (k_rot=2–6 s^?1) at 298 K. It is also demonstrated that the rotation is slower in [D₆]DMSO than in CD₂Cl₂. A linear relationship between the free energies of the rotational barrier and the steric parameter A values is present only for (Z)‐ 1 H , (Z)‐ 1 OM , and (Z)‐ 1 NO , and it levels off on going from (Z)‐ 1 NO to (Z)‐ 1 Pr and (Z)‐ 1 Bu . DFT calculations provide insights into the substituent effects in the rotational ground and transition states. The molar reversibility of the E–Z photoswitching is up to 46 %, and both the E and Z isomers are stable under the irradiation conditions.     

The First Ring‐Enlargement of a 1‐Azabicyclo[1.1.0]butane to a 1‐Azabicyclo[2.1.1]hexane

The reactions of 3‐phenyl‐1‐azabicyclo[1.1.0]butane ( 4 ) with dimethyl dicyanofumarate ((E)‐ 8 ) and dimethyl dicyanomaleate ((Z)‐ 8 ) lead to the same mixture of cis‐ and trans‐4‐phenyl‐1‐azabicyclo[2.1.1]hexane 2,3‐dicarboxylates (cis‐ 11 and trans‐ 11 , resp.; Scheme 3). This result of a formal cycloaddition to the central C? N bond of 4 is interpreted by a stepwise reaction mechanism via a relatively stable zwitterionic intermediate 10 , which could be intercepted by morpholine to give a 1 : 1 : 1 adduct 12 , which undergoes a spontaneous elimination of HCN to yield the fumarate 13 (Scheme 4).     

Metabolism of Deuterated Isomeric 6,7‐Dihydroxydodecanoic Acids in Saccharomyces cerevisiae – Diastereo‐ and Enantioselective Formation and Characterization of 5‐Hydroxydecano‐4‐lactone (=4,5‐Dihydro‐5‐(1‐hydroxyhexyl)furan‐2(3H)‐one) Isomers

The chemical synthesis of deuterated isomeric 6,7‐dihydroxydodecanoic acid methyl esters 1 and the subsequent metabolism of esters 1 and the corresponding acids 1a in liquid cultures of the yeast Saccharomyces cerevisiae was investigated. Incubation experiments with (6R,7R)‐ or (6S,7S)‐6,7‐dihydroxy(6,7‐²H₂)dodecanoic acid methyl ester ((6R,7R)‐ or (6S,7S)‐(6,7‐²H₂)‐ 1 , resp.) and (±)‐threo‐ or (±)‐erythro‐6,7‐dihydroxy(6,7‐²H₂)dodecanoic acid ((±)‐threo‐ or (±)‐erythro‐(6,7‐²H₂)‐ 1a , resp.) elucidated their metabolic pathway in yeast (Tables 1–3). The main products were isomeric ²H‐labeled 5‐hydroxydecano‐4‐lactones 2 . The absolute configuration of the four isomeric lactones 2 was assigned by chemical synthesis via Sharpless asymmetric dihydroxylation and chiral gas chromatography (Lipodex ^® E). The enantiomers of threo‐ 2 were separated without derivatization on Lipodex ^® E; in contrast, the enantiomers of erythro‐ 2 could be separated only after transformation to their 5‐O‐(trifluoroacetyl) derivatives. Biotransformation of the methyl ester (6R,7R)‐(6,7‐²H₂)‐ 1 led to (4R,5R)‐ and (4S,5R)‐(2,5‐²H₂)‐ 2 (ratio ca. 4 : 1; Table 2). Estimation of the label content and position of (4S,5R)‐(2,5‐²H₂)‐ 2 showed 95% label at C(5), 68% label at C(2), and no ²H at C(4) (Table 2). Therefore, oxidation and subsequent reduction with inversion at C(4) of 4,5‐dihydroxydecanoic acid and transfer of ²H from C(4) to C(2) is postulated. The 5‐hydroxydecano‐4‐lactones 2 are of biochemical importance: during the fermentation of Streptomyces griseus, (4S,5R)‐ 2 , known as L‐factor, occurs temporarily before the antibiotic production, and (?)‐muricatacin (=(4R,5R)‐5‐hydroxy‐heptadecano‐4‐lactone), a homologue of (4R,5R)‐ 2 , is an anticancer agent.     

(E/Z)‐Isomerization of (all‐E)‐5,6‐Diepikarpoxanthin

(all‐E)‐5,6‐Diepikarpoxanthin (=(all‐E,3S,5S,6S,3′R)‐5,6‐dihydro‐β,β‐carotene‐3,5,6,3′‐tetrol; 1 ) was submitted to thermal isomerization and I₂‐catalyzed photoisomerization. The structures of the main products, i.e. (9Z)‐ ( 2 ), (9′Z)‐ ( 3 ), (13Z)‐ ( 4 ), (13′Z)‐ ( 5 ), and (15Z)‐5,6‐diepikarpoxanthin ( 6 ), were determined by their UV/VIS, CD, ¹H‐NMR, and mass spectra. In addition, (9Z,13′Z)‐ or (13Z,9′Z)‐ ( 7 ), (9Z,9′Z)‐ ( 8 ), and (9Z,13Z)‐ or (9′Z,13′Z)‐5,6‐diepikarpoxanthin ( 9 ) were tentatively identified as minor products of the I₂‐catalyzed photoisomerization.     

Cycloaddition Reactions of 7‐Benzylidenecycloocta‐1,3,5‐triene with Ethenetetracarbonitrile and 4‐Phenyl‐3H‐1,2,4‐triazole‐3,5(4H)‐dione

An (E)/(Z) mixture (3 : 2) of 7‐benzylidenecycloocta‐1,3,5‐triene ( 5 ) is obtained when 1‐benzylcycloocta‐1,3,5,7‐tetraene ( 7 ), prepared by an improved procedure, is treated with t‐BuOK in THF. Alternatively, a ca. 9 : 1 mixture (E)/(Z)‐ 5 can be prepared in a Wittig reaction involving benzaldehyde and cycloocta‐2,4,6‐trien‐1‐ylidenetriphenylphoshorane ( 9 ). Treatment of (E)/(Z)‐ 5 88 : 12 with ethenetetracarbonitrile (TCNE) gave a complex mixture of products, from which seven mono‐adducts and two bis‐adducts were isolated (Sect. 2.2.1). Of the mono‐adducts, four are π4+π2 adducts: two ((E)‐ and (Z)‐isomers) are derived from valence tautomers of the two isomers of (E)/(Z)‐ 5 , while it is tentatively suggested that the other two (again (E)‐ and (Z)‐isomers) are formed from the intermediacy of a pentadienyl zwitterion (Sect. 2.3). The remaining three mono‐adducts, two of which are epimers, are π8+π2 adducts. It is suggested that they are derived from the intermediacy of homotropylium zwitterions (Sect. 2.3). For the two bis‐adducts, it is postulated that they are derived from an initial π2+π2 cycloaddition involving the homotropylium zwitterions followed by π4+π2 cycloaddition to the valence tautomer of each of the π2+π2 cycloadducts. With 4‐phenyl‐3H‐1,2,4‐triazole‐3,5(4H)‐dione ( 6 ), (E)/(Z)‐ 5 91 : 9 yielded two π4+π2 cycloadducts ((E)‐ and (Z)‐isomers) as well as two epimeric π8+π2 cycloadducts (Sect. 2.2.2). The intermediacy of pentadienyl (tentative suggestion) and homotropylium zwitterions accounts for the formation of the products (Sect. 2.3).     

Stereoselective Reduction of `Capsanthol‐3′‐ones' (=3,6′‐Dihydroxy‐β,κ‐caroten‐3′‐ones) by Complex Hydrides

The (3R,5′R,6′R)‐ and (3R,5′R,6′S)‐capsanthol‐3′‐one (=3,6′‐dihydroxy‐β,κ‐caroten‐3′‐one; 4 and 5 , resp.) were reduced by different complex metal hydrides containing organic ligands. The ratio of the thus obtained diastereoisomeric (3′S)‐capsanthols 2 and 3 or (3′R)‐capsanthols 6 and 7 , respectively, was investigated. Four complex hydrides showed remarkable stereoselectivity and produced the (3′R,6′S)‐capsanthol ( 6 ) in 80 – 100% (see Table 1). The starting materials and the products were characterized by UV/VIS, CD, ¹H‐ and ¹³C‐NMR, and mass spectra.     

Reactions of Methyl Diazoacetate with (E)‐ and (Z)‐1,2‐Bis(trifluoromethyl)ethene‐1,2‐dicarbonitrile: Novel and Unanticipated Pathways

The cycloadditions of methyl diazoacetate to 2,3‐bis(trifluoromethyl)fumaronitrile ((E)‐ BTE ) and 2,3‐bis(trifluoromethyl)maleonitrile ((Z)‐ BTE ) furnish the 4,5‐dihydro‐1H‐pyrazoles 13 . The retention of dipolarophile configuration proceeds for (E)‐ BTE with > 99.93% and for (Z)‐ BTE with > 99.8% (CDCl₃, 25°), suggesting concertedness. Base catalysis (1,4‐diazabicyclo[2.2.2]octane (DABCO), proton sponge) converts the cycloadducts, trans‐ 13 and cis‐ 13 , to a 94 : 6 equilibrium mixture (CDCl₃, r.t.); the first step is N‐deprotonation, since reaction with methyl fluorosulfonate affords the 4,5‐dihydro‐1‐methyl‐1H‐pyrazoles. Competing with the cis/trans isomerization of 13 is the formation of a bis(dehydrofluoro) dimer (two diastereoisomers), the structure of which was elucidated by IR, ¹⁹F‐NMR, and ¹³C‐NMR spectroscopy. The reaction slows when DABCO is bound by HF, but F^? as base keeps the conversion to 22 going and binds HF. The diazo group in 22 suggests a common intermediate for cis/trans isomerization of 13 and conversion to 22 : reversible ring opening of N‐deprotonated 13 provides 18 , a derivative of methyl diazoacetate with a carbanionic substituent. Mechanistic comparison with the reaction of diazomethane and dimethyl 2,3‐dicyanofumarate, a related tetra‐acceptor‐ethylene, brings to light unanticipated divergencies.     

One‐Pot,Asymmetric and Diastereoselective Four‐Component Synthesis of Polyfunctional (Z)‐Alkenyl Methyl Sulfones with Three Stereogenic Centers

The reaction of 1‐(trimethylsilyloxy)cyclopentene ( 9 ) with (±)‐1,3,5‐triisopropyl‐2‐(1‐(RS)‐{[(1E)‐2‐methylpenta‐1,3‐dienyl]oxy}ethyl)benzene ((±)‐ 4a ) in SO₂/CH₂Cl₂ containing (CF₃SO₂)₂NH, followed by treatment with Bu₄NF and MeI gave a 3.0 : 1 mixture of (±)‐(2RS)‐2{(1RS,2Z,4SR)‐2‐methyl‐4‐(methylsulfonyl)‐1‐[(RS)‐1‐(2,4,6‐triisopropylphenyl)ethoxy]pent‐2‐en‐1‐yl}cyclopentanone ((±)‐ 10 ) and (±)‐(2RS)‐2‐{(1RS,2Z)‐2‐methyl‐4‐[(SR)‐methylsulfonyl]‐1‐[(SR)‐1‐(2,4,6‐triisopropylphenyl)ethoxy]pent‐2‐en‐1‐yl}cyclopentanone ((±)‐ 11 ). Similarly, enantiomerically pure dienyl ether (−)‐(1S)‐ 4a reacted with 1‐(trimethylsilyloxy)cyclohexene ( 12 ) to give a 14.1 : 1 mixture of (−)‐(2S)‐2‐{(1S,2Z,4R)‐2‐methyl‐4‐(methylsulfonyl)‐1‐[(S)‐1‐(2,4,6‐triisopropylphenyl)ethoxy]pent‐2‐enyl}cyclohexanone ((−)‐ 13a ) and its diastereoisomer 14a with (1S,2R,4R) or (1R,2S,4S) configuration. Structures of (±)‐ 10 , (±)‐ 11 , and (−)‐ 13a were established by single‐crystal X‐ray crystallography. Poor diastereoselectivities were observed with the (E,E)‐2‐methylpenta‐1,3‐diene‐1‐ylethers (+)‐ 4b and (−)‐ 4c bearing ( 1 S )‐1‐phenylethyl and (1S)‐1‐(pentafluorophenyl)ethyl groups instead of the Greene's auxiliary ((1S)‐(2,4,6‐triisopropylphenyl)ethyl group). The results demonstrate that high α/β‐syn and asymmetric induction (due to the chiral auxiliary) can be obtained in the four‐component syntheses of the β‐alkoxy ketones. The method generates enantiomerically pure polyfunctional methyl sulfones bearing three chiral centers on C‐atoms and one (Z)‐alkene moiety.     

Conformations of the Nine‐Membered Ring in the B‐Nor‐5,10‐secosteroids. X‐Ray and NMR Analysis

The conformations of (Z)‐ and (E)‐5‐oxo‐B‐nor‐5,10‐secocholest‐1(10)‐en‐3β‐yl acetates ( 2 and 3 , resp.) were examined by a combination of X‐ray crystallographic analysis and NMR spectroscopy, with emphasis on the geometry of the cyclononenone moiety. The ¹H‐ and ¹³C‐NMR spectra showed that the unsaturated nine‐membered ring of (E)‐isomer 3 in C₆D₆ and (D₆)acetone solution exists in a sole conformation of type B ₁ , which is similar to its solid‐state conformation. The (Z)‐isomer 2 in C₆D₆, CDCl₃, and (D₆)acetone solution, however, exists in two conformational forms of different families, with different orientation of the carbonyl group, the predominant form (85%) corresponding to the conformation of type A ₁ and the minor (15%) to the conformation A ₂ present also in the crystalline state. In this solid‐state conformations of the nine‐membered ring of both compounds, the 19‐Me and 5‐oxo groups are ‘β’‐oriented. The NMR analysis suggests that the nine‐membered ring of 4 has a conformation of type C ₁ in CDCl₃ solution.     

(E)‐,(Z)‐Parallel Preparative Methods for Stereodefined β,β‐Diaryl‐ and α,β‐Diaryl‐α,β‐unsaturated Esters: Application to the Stereocomplementary Concise Synthesis of Zimelidine

Parallel and practical methods for the preparation of both (E)‐ and (Z)‐β‐aryl¹‐β‐aryl²‐α,β‐unsaturated esters 1 and (E)‐ and (Z)‐α‐aryl¹‐β‐aryl²‐α,β‐unsaturated esters 2 are described. These methods involve accessible, robust, stereocomplementary N‐methylimidazole (NMI)‐mediated enol tosylations (14 examples, 70–99 % yield), as well as stereoretentive Suzuki–Miyaura cross‐couplings (36 examples, 64–99 % yield). The highlighted feature of the present protocol is the use of parallel and stereocomplementary approaches to obtain highly (E)‐ and (Z)‐pure products 1 and 2 by utilizing sequential enol tosylations and cross‐coupling reactions. An expeditious and parallel synthesis of (E)‐ and (Z)‐zimelidine ( 3 ), which is a highly representative selective serotonin reuptake inhibitor (SSRI), was performed by utilizing the present methods.     

Sulfonamide‐derived compounds and their transition metal complexes: synthesis,biological evaluation and X‐ray structure of 4‐bromo‐2‐[(E)‐{4‐[(3,4‐dimethylisoxazol‐5 yl)sulfamoyl]phenyl} iminiomethyl] phenolate

Sulfonamide‐derived new ligands, 4‐({[(E)‐(5‐bromo‐2‐hydroxyphenyl)methylidene]‐amino}methyl)benzenesulfonamide and 4‐bromo‐2‐((E)‐{4‐[(3,4‐dimethylisoxazol‐5‐yl)sulfamoyl]phenyl}iminiomethyl)phenolate and their transition metal [cobalt(II), copper(II), nickel(II) and zinc(II)] complexes were synthesized and characterized. The nature of bonding and structure of all the synthesized compounds were deduced from physical (magnetic susceptibility and conductivity measurements), spectral (IR, ¹H and ¹³C NMR, electronic, mass spectrometry) and analytical (CHN analysis) data. The structure of the ligand, 4‐bromo‐2‐((E)‐{4‐[(3,4‐dimethylisoxazol‐5‐yl)sulfamoyl]phenyl} iminiomethyl)phenolate was also determined by X‐ray diffraction method. An octahedral geometry was suggested for all the complexes. In order to evaluate the biological activity of the ligands and the effect of metals, the ligands and their metal complexes were screened for in vitro antibacterial, antifungal and cytotoxic activity. The results of these studies revealed that all compounds showed moderate to significant antibacterial activity against one or more bacterial strains and good antifungal activity against various fungal strains. Copyright © 2011 John Wiley & Sons, Ltd.     

Synthesis of (P)‐ and (M)‐6,7‐Bis[(diphenylphosphanyl)methyl]‐8,12‐diphenylbenzo[a]heptalenes – Potential Ligands for Homogeneous Asymmetric Catalysis

The title bis(phosphane) ligands have been prepared starting from optically pure diisopropyl (P)‐ and (M)‐8,12‐diphenylbenzo[a]heptalene‐6,7‐dicarboxylates ((P)‐ 1b and (M)‐ 1b ) that had been obtained by HPLC separation of rac‐ 1b on a semi‐preparative Chiralcel OD column. Reduction of (P)‐ 1b and (M)‐ 1b with diisobutylaluminum hydride (DIBAH) gave optically pure (P)‐ and (M)‐dimethanols 3 (Scheme 6 and Fig. 5). Unfortunately, the almost quantitative chlorination of rac‐ 3 with PCl₅ in CHCl₃ at −60° led with (M)‐ 3 to nearly complete loss of optical integrity. However, mesylate formation of (P)‐ 3 , followed by phosphanylation with LiP(BH₃)Ph₂ gave (P)‐ 6 with only a small loss of optical activity. Optically pure (P)‐ 6 was obtained by crystallization from Et₂O/hexane, which removed the nearly insoluble rac‐ 6 . The pure bis(phosphane) ligands (P)‐ 2 and (M)‐ 2 can be liberated quantitatively from 6 by warming 6 in toluene in the presence of 1,4‐diazabicyclo[2.2.2]octane (DABCO). First Rh^I‐catalyzed asymmetric hydrogenation reactions of (Z)‐α‐(acetamido)cinnamic acid ((Z)‐ 14 ) in the presence of (P)‐ 2 led to (R)‐N‐acetylphenylalanin ((R)‐ 15 ) in optical purities up to 77% (see Table 1).